Chadnremtp

New User
Hi everyone. I'm new here and new to the tractor community. I'm purchasing a 1972 AC 620. My intent is to restore it. I'm a welder and fabricator and have experience working with lawnmowers and weedeaters. But I have no experience with Tractors. My first issue is that it doesn't have the spline shaft for rear PTO. Where's the best place to get information and parts. I've read about someone name Mike Noonan I believe. How would I order from him? I appreciate any help you guys can give me!
mvphoto97147.jpg



This post was edited by Chadnremtp on 09/12/2022 at 08:56 pm.
 
2000 RPM PTO male part of the shaft is on the implement shaft.1st thing to check is if it has the PTO shaft from the motor to the rear.I have an original equipment Danco bushhog to fit that tractor
for sale.
 
(quoted from post at 17:05:02 09/12/22) OK so you were referring to the shaft under the seat right? I have a parts tractor with a shaft if you are interested.I'm in Virginia.
I tried to post a picture but it won't let me. On the very back of the tractor where they would normally be a pto shaft coming out, there's a plate bolted on. My email is [email protected]. If you will send me a email and I'll send you a picture. I'm definitely interested. I'm going to pick up the tractor September 24th. It's in West Virginia. I live in SC.
 
I must be doing something wrong. I've tried everything and I can't send you a email or a private message. I was able to get a picture above. I'm definitely interested in those. You can email me. [email protected]
 

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Back
Top