Do the piston heads on a 149 have a front and back orientantion? I have a new kit dished original style and can find no markings for orientation and see no reason it would matter, but tractors are a bit different than cars so IM out of my element.
Also is there a standard orientation for the connecting rods, I think cyl #1 had the bearing tabs on the left side where other 3 were on the right(memory not gospel). It also had some wear at the wrist pin from rubbing the piston, I am nearly certain its been gone through before. Thanks fellas
Also is there a standard orientation for the connecting rods, I think cyl #1 had the bearing tabs on the left side where other 3 were on the right(memory not gospel). It also had some wear at the wrist pin from rubbing the piston, I am nearly certain its been gone through before. Thanks fellas