(800) 853-2651
SHOP NOW

WD PTO 6 spline shaft diameter

N

newwood

New User
I'm about to order an PTO overrun coupling for my WD but I failed to measure the diameter (I'm thinking it's 1 3/8ths? 1 1/8th?). Unfortunately it's about 900 miles away so I can't just pop out and measure it so I was hoping one of you could help me out with the shaft diameter (6 spline). I can find the part online but it never mentions the diameter.

Also, this WD is new to me: the hydraulic only seems to work when the foot clutch is released -- kind of a surprise to me -- is that standard (I'm not quite seeing it as a feature)

Thanks all.
 
The WD PTO spline is 1-3/8". Yes, the foot clutch must be engaged for the hydraulic to work. To stop travel but continue with PTO and/or hydraulic, throw out the hand clutch.
 
It is a feature. Gives you live power to belt pully and PTO. However don't expect to shift or engage a gear from stop using the hand clutch with cold oil. The hand clutch
runs in oil and will drag until the oil is warm. An oil thinner than 90 weight will help this situation.
 
Its not a feature, but the way they made them. Allis was WAYYYY late with independent PTO. The WD PTO and hyd only work with the transmission clutch engaged.
AaronSEIA
 
You must log in or register to reply here.

Similar threads

F
Bolens G192 / Iseki TS1910 PTO differences
Replies
0
Views
84
fordmaneddie
F
4
Front PTO 411B Spline Size
Replies
1
Views
283
DKase
D
A
Conversion overdrive or swap the PTO shaft?
2
Replies
23
Views
1K
Caryc
C
D
Lube fitting in PTO shaft
Replies
12
Views
705
Fritz Maurer
F
S
JD H PTO / Power Shaft replacement
Replies
5
Views
483
sc4ram
S
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top