Wd45 connecting rod bolt and nut needed

ALLIS FOREVER · Sep 9, 2020

Looking if someone can supply me with a connecting rod bolt and nut
for a wd45

I can pay via PayPal or check

Thanks

charles Leddy · Sep 12, 2020

Are they hard to buy new? Is WD And WD-45 the same? I needed a connecting rod for a WD and a place in Nebraska had used parts and sold one reasonable. I'm not sure I could find the old one and seems risky to use a old part? I could try to find the name of the place with the used parts but it been awhile?Cleddy

ALLIS FOREVER · Sep 12, 2020

Found one thanks

Actually now looking for a sleeve and piston before I buy a new one trying to see if there is a decent used one somewhere.

The other 3 are used so I rather save money than buy new if anyone has one.

4.125” sleeve and piston if anyone has a nice used one.

DrAllis · Sep 13, 2020

(quoted from post at 13:35:02 09/12/20) Found one thanks

Actually now looking for a sleeve and piston before I buy a new one trying to see if there is a decent used one somewhere.

The other 3 are used so I rather save money than buy new if anyone has one.

4.125" sleeve and piston if anyone has a nice used one.

Now right there, you are going to have a problem. I'd bet there are at least 6 DIFFERENT pistons with that bore size to fit that AC engine. You need an exact duplicate for compression ratio and balance. So, any numbers or stampings and a picture of the piston head and dimensions of overall length, etc are needed to come up with a match.

Wd45 connecting rod bolt and nut needed

ALLIS FOREVER

Member

charles Leddy

Member

ALLIS FOREVER

Member

DrAllis

Well-known Member

Similar threads