(800) 853-2651
SHOP NOW

Hey All!! AC i400 New to me...questions questions questions

R

Rob john

New User
Hey gang, I know the I400 is a d10/12 in disguise and I have some service manuals but I have some specific I400 questions...I have a leak on the ditch side main lift piston for the bucket. not terrible but a pretty steady drip...looks like a piston seal. I cant seem to find any information on repacking it or a parts list ...any help would be great...then we can tackle the PTO leak and brakes!
 
(quoted from post at 13:20:18 06/11/20) Hey gang, I know the I400 is a d10/12 in disguise and I have some service manuals but I have some specific I400 questions...I have a leak on the ditch side main lift piston for the bucket. not terrible but a pretty steady drip...looks like a piston seal. I cant seem to find any information on repacking it or a parts list ...any help would be great...then we can tackle the PTO leak and brakes!
Click to expand...

Hopefully someone has one and can help you with actual part numbers (which may or may not be available now). Based on what I have seen I expect you need to find a parts book for the loader itself, I know the hoe is a separate book. Minnpar has many AGCO/Allis catalogs on line and the I400 catalog they have is just for the tractor. You could try giving them a call and asking what they might have for the loader, they do a lot with parts for Allis Chalmers construction equipment. I didn't see any listed at Baum Hydraulics. Is there any identification on the loader itself? I just thinking there is also a chance it is not an I400 loader. Beyond this, I believe your best bet is to tear a cylinder down and take the parts to a shop that rebuilds cylinders. They will likely be able to match new parts to your old ones, that is a common practice with seals/packing components for old cylinders.

There is at least one service manual for I40 and I400 loaders, not the tractors, on eBay currently.
 
Thanks Jim!!
I will check out both suggestions!
I was hoping for something in AC Persian Orange if i was to own an old AC but this tractor will fit my needs and it's kind of a rare bird

R
 
You must log in or register to reply here.

Similar threads

ks_dave
Brand new 1983 555 - Well, new to me...
Replies
11
Views
290
ks_dave
ks_dave
M
New-to-me JD-A and JD-B Repair Tips
Replies
13
Views
801
Fixingfarmer
Fixingfarmer
T
Re: Hey All!! AC i400 New to me...questions questions quest
Replies
1
Views
422
Rob john
R
Slow lane 49
Couldn't say no to a 350 Utility
Replies
18
Views
1K
Slow lane 49
Slow lane 49
P
New to me 440 with loader ???
Replies
4
Views
712
PowderKeg
P
Tractor Parts Tractor Manuals

We sell tractor parts! We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today.

Copyright © 1997-2024 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters
Website Accessibility Policy

Back
Top