Loader on 5050

Graveyard1984 · Dec 6, 2018

Can a 5050 allis Chalmers tractor handle a loader.
If so what brand and size
Thanks

gatz271 · Dec 7, 2018

You bet !

This is a 5040 with live hydraulics and a #400 all-hydraulic loader. Wasn't any problems running it. Only issure would be traction.

The 5040 and 5050 are stout little tractors !

Bob Bancroft · Dec 7, 2018

The AC loader for those tractors, pictured, was a good fit. If I remember correctly, an auxiliary pump was mounted on the rear of the tractor.

Graveyard1984 · Dec 7, 2018

Sounds like the pump and loader would be hard to find for a tractor that old

Traditional Farmer · Dec 8, 2018

The AC loader pictured of course would be good also a loader off Long 445 or 460 tractors and a loader off an Oliver 1255 or 1265 would fit.A 4 cylinder Long would have basically the same loader just be a little longer and most loaders have multiple holes to make up the difference.The main thing is to get the hydraulic pump that bolts on above the PTO shaft.

gatz271 · Dec 9, 2018

Just FYI, this loader is NOT a "quick-tach" in any sense of the word.... in fact it's a VERY SLOW-tach.
It's more like semi-permament.
For mowing, I took the bucket off and tied the tilt cylinders to the arms to better see where I was going and make it less stressful on the front end.
And yes, the live hyd pump(via 2-stage clutch) is on the back end right above the PTO.

Loader on 5050

Graveyard1984

Member

gatz271

Member

Bob Bancroft

Well-known Member

Graveyard1984

Member

Traditional Farmer

Well-known Member

gatz271

Member

Similar threads