Need exhaust manifold for 180

mountaindog · Jun 7, 2018

My son in law has a 180 and the exhaust manifold is cracked.
It is beyond repair. quarter size hole and pieces missing.
If anybody has one they would like to sell please let me know.

Tramway Guy · Jun 7, 2018

Might want to specify gas or diesel....

mountaindog · Jun 7, 2018

Whops, sorry, Gas engine.

(reply to post at 21:06:54 06/07/18)

jfreed · Jun 10, 2018

I looked up a part # off of the AGCO book and googled that #. If your looking for a "new" replacement aftermarket, you might be SOL.

DrAllis · Jun 11, 2018

Your best bet for a decent used manifold would be from a model "G" Gleaner combine with the six cylinder engine in it.

mountaindog · Jun 11, 2018

Don't need a "New" one. He is not restoring the tractor, just wants to get it running so he can use it.

YTSupport · Jun 12, 2018

Have you contacted all the welders in your area to see what they can do. Most won't touch something like that and will say it can't be done, but some might be good enough. The cost will often be less than a new one or maybe a used one. Obviously, I haven't seen the damage so maybe it's worse than I'm visualizing, but I always start with local experts when a part is hard to find.

I would certainly first call around for a used manifold such as DrAllis suggested, because that's an easy surefire solution, but if you can't find one, a good welder can do amazing things, even with cast.

Need exhaust manifold for 180

mountaindog

Member

Tramway Guy

Well-known Member

mountaindog

Member

jfreed

Member

DrAllis

Well-known Member

mountaindog

Member

YTSupport

Administrator

Similar threads