Probably a dumb question

jerkus730 · Jan 28, 2018

Is it possible to pull the transmission out of a WD without pulling the engine?

DrAllis · Jan 28, 2018

The transmission is in the rear end housing which starts underneath the battery box. So, no..... removal of the engine isn't required.

JMS/.MN · Jan 28, 2018

Yes. The I&T AC 11 service manual has an illustration of using long line-up bolts when separating the frame from the rear axle, giving you access to the transmission. Personally, I"d prefer to move everything forward, and maintain stability of the tractor.

Moonlite37 · Feb 3, 2018

It is possible, but removing the engine is so easy, I could see no reason not to pull the engine

DrAllis · Feb 3, 2018

Please explain to me WHY you'd want to pull the engine to work on the transmission on a WD...?? There is absolutely nothing to gain by doing that....nothing. The 4-speed transmission is in the rear end housing, about 3 feet behind the engine.

Probably a dumb question

jerkus730

Member

DrAllis

Well-known Member

JMS/.MN

Well-known Member

Moonlite37

Well-known Member

DrAllis

Well-known Member

Similar threads