Working on a Duetz Allis 6275, needed to reseal the steering cylinder. From a dealer, the seal kit was $430, included 2 u packings, 2 wiper seals, 2 back up rings, 1 piston seal, 4 teflon wear rings, and 2 orings. Got the parts at a local hyd shop for $70. Bushings were out of blower motor, ruined the housing and shaft. Depending on serial number one blower motor (just the motor) was $642 and if it was the other serial no it was going to be $970. Went to the hardware store instead, bought some metric bearings for an electric drill motor for $10 each that fit on the good part of the shaft, and machined some bosses for them out of some steel bushings I had. Disassembled the motor, centered the bushing bosses on the moter housing ends, and brazed them on. Reassemebled motor and staked both ends of the shaft to keep it from walking back and forth, took me about an hour to do. But I think thats crazy for parts prices, must be because they have to come from overseas im guessing? Ross