Hdys on D14

Howard Junkin · Dec 1, 2013

On my D14 the loader hdys are tapped off the hdys on the 3 point. So when I raise the loader it also raises the three point. How can I make the loader independent of the three point? Will this mean that I'll have to put another pump on it. If I do where and how do I do this?
Thanks Howard

Bob Bancroft · Dec 1, 2013

Since the line(s) going back to the transport valve are external, you could separate them back at that valve, and plump them separately. But then you could only use one to once. I suppose you could put a selector valve back there, and switch from one function to the other quickly and easily.
Another whole system, with sump, pump, valve, etc. would be a major undertaking. Off the front of the engine, or off the PTO is about it.

Hdys on D14

Howard Junkin

Member

Bob Bancroft

Well-known Member

Similar threads