Hyraulics

lil bull · May 1, 2012

I have a 1954 WD45 that has and aftermarket Kelly front loaded on and it is powered by a pto driven hydraulic pump with a home made 2 spool setup, up and down and tilt bucket. It is fairly slow acting, especially during the cold months. I was wondering if there was a way to hook it into the tractor hyraulics. I do not use the lift arms for anything, they have been cut off and there is a big counter weight hanging on the back of the tractor. If anyone has any suggestions please feel free to unload them. I have the largest sprocket on the pto and small one on the pump. I do not know whatt type of a pto pump is on there. thanks

old · May 1, 2012

The tractor hyds are a low GPM high pressure system and you would most likely end up with it working a lot slows and or blowing cylinder and hoses unless they are made to handle around 3500PSI. As for a way to maybe speed it up make sure it has a thin hyd oil in it not one of the heavy weight types and that will help some

Hyraulics

lil bull

New User

old

Well-known Member

Similar threads