Center link bracket on wd

Curt south of K.C. · Feb 8, 2012

Bracket i built for my wd

old · Feb 8, 2012

Looks pretty good but till you really give it a test one never knows. Looks like it might be a tad light but again you never know till tested on some thing heavy. Looks like at one time it had the classic weld on tabs on the rock shaft like many of them I see

steve(ill) · Feb 8, 2012

bracket looks strong enough to pick up the tractor to me. Should work out great. Spread the load out between several bolts - helps.

Aaron SEIA · Feb 8, 2012

I'm with you steve. If the welds are good and they look like it. The one I made for mine looks a bit like tin foil compaired to that one, but it'll carry my heavy 2 row cultivator.
AaronSEIA

Anonymous-0 · Feb 9, 2012

I'd generally agree with the others, below, but I like to take them a little further. I can't remember on the wd, but on some I've done, I wrapped 2 more straps of iron, around to the front of the rear, and put it on bolts, there, in addition, to what you have done to the rear side of the rear.

Nathan (SD) · Feb 9, 2012

By the amount of rust and oil on this bracket, I would guess it has had plenty of use already.

BushogPapa · Feb 9, 2012

Very nice job...!!!

I just put a "U-shaped" strap around the cross bar, with a muffler clamp on each side..
It worked out better than it sounds..!

Guess I should take some new pics of the conversion I made...

Ron.

Center link bracket on wd

Curt south of K.C.

Member

old

Well-known Member

steve(ill)

Well-known Member

Aaron SEIA

Well-known Member

Anonymous-0

Well-known Member

Nathan (SD)

Member

BushogPapa

Well-known Member

Similar threads