49 B Rear Axle

jmcarlson · Jan 5, 2012

Our '49 B has a rear axle with a 5-bolt flange rather than the tapered spline. I'm looking for the part numbers for the bearings and seals. Are they different from the standard rear axle?

Thanks in advance,
Jeff

Carlyle hoffman · Jan 5, 2012

No, seals and bearings are the same, you are only referring to the different HUB variations that are available. There were 2, one for the HEAVY cast iron WHEEL and 1 for the 9 BOLT hub for the light weight pressed steel wheel.

Jerry Coulter · Jan 5, 2012

AC part number for the seal is 206450 which is CR25065.

AC number for the outer cone is 209900, cup is 209901 which is 368 & 362. I think these are Timken numbers.

AC number for the inner cone is 209889 which is 14138A.

AC number for inner cup is 209890 which is 14276.

This info is from very old books. May be some numbers converted. Seems as if both axles take same bearings.

chalmersbob(Pa) · Jan 5, 2012

nine bolt hub on a B? a "pressed steel wheel?
That is a new one to me.
Bob

jmcarlson · Jan 6, 2012

Thanks for the info. My sons are still trying to get the axle out. We're thinking of trying a bottle jack to press it out as someone else described in an older thread here.

Anonymous-0 · Jan 6, 2012

their is a snap ring holdig it in place[inside]

49 B Rear Axle

jmcarlson

New User

Carlyle hoffman

Member

Jerry Coulter

Member

chalmersbob(Pa)

Member

jmcarlson

New User

Anonymous-0

Well-known Member

Similar threads