Allis chalmers stroker

Anonymous-0 · Jul 23, 2011

Does anybody know of a stroker kit that I can buy for a wd wc or d17? I want to install it myself. If that is possible.

Tramway Guy · Jul 24, 2011

Easy for a WC or WD is to install a WD45 Crankshaft. That will give you another 1/2" stroke. If you want to still use regular gas, you need to also install WD45 pistons, however.

Anonymous-0 · Jul 24, 2011

I already knew that. I mean something bigger stronger and faster.

Aaron SEIA · Jul 24, 2011

There are no "kits" that I know of. Go ask on the pulling page and you'll get directed to who makes what and how to do it all.
AaronSEIA

jd plowboy · Jul 24, 2011

i have a wd45 that i pull that has a wd45 crank that has been offset ground 3/8 of a inch and uses the buda diesel rods. it has wc flattop pistons in it which come .400 from top of block. it has cam work and good valve job and it is hard to beat. i have run it on 110 racing fuel and 93 pump gas and it does just as good on either. i have never stalled it out pulling up to 6000 lbs. it is a 260 cube engine which is a 4 7/8 x 4 1/8 bore. it is a nice little engine. been pulling it for 5 years or so and no problems at all.

Anonymous-0 · Jul 25, 2011

how big ?how much faster? how much budget?

Allis chalmers stroker

Anonymous-0

Well-known Member

Tramway Guy

Well-known Member

Anonymous-0

Well-known Member

Aaron SEIA

Well-known Member

jd plowboy

Member

Anonymous-0

Well-known Member

Similar threads