tsx 773 carb

roger kosharek · Jun 7, 2011

will this carb work on my wd allis i need to upgrade from a159 tsx i use it for pulling or will the tsx464 work too

old · Jun 7, 2011

If I remember right yes it will bolt up but do not expect to get much if any gain from doing so. You can only use so much fuel and after that all your doing it flooding it. You should be able to take the carb you have and open up the main jet enough to get black smoke and that would do as much as going with the carb for the D-17/WD45

Kip-Utah · Jun 7, 2011

773 or 464 are essentially the same carb off of 226 cid engines. Either one will bolt right up to your WD. We have a 773 on a 240 cid(.125 overbore & 0.50 stroke 201) WC puller that turns around 1900-2000 rpms and a 464 on another 217 cid WC that runs stock rpms (.125 overbore 201).
Both tractors are using a current one size fits fits all WC/WD/WD45/earlyD17 replacement manifold and they both run great! Kip

roger kosharek · Jun 7, 2011

the wd has a wd 45 kit ijust found i have a45 or d17 on my allis is 185.00 resonable for a carb tsx773 they are all redone

old · Jun 7, 2011

Just to give you an idea of the price for them my nnalert catalog lists a rebuilt TSX773 for $271 plus a $100 core so if it has been rebuilt correctly that is not to bad a price

roger kosharek · Jun 16, 2011

just installthenew carb tsx713 today and the wd runs nice and more thottle response

tsx 773 carb

roger kosharek

Member

old

Well-known Member

Kip-Utah

Member

roger kosharek

Member

old

Well-known Member

roger kosharek

Member

Similar threads