wd cyl. head torque

packerjack · Mar 31, 2011

could someone please tell me torque for head bolts on wd head thank you

Jim350 · Mar 31, 2011

1/2 inch studs 70 foot pounds.
3/8 inch studs 25 foot pounds.

Retighten after engine is warm.

BushogPapa · Mar 31, 2011

Not "warm"..HOT, Heat-Soaked all the way through..

Hope the plate over the rear water opening seals..

I usually need to try at least twice, to get that to seal, between the 2 head bolts..

If you get seeping on the plug-side, it should stop when the head gasket settles...

Ron..

wd cyl. head torque

packerjack

New User

Jim350

Member

BushogPapa

Well-known Member

Similar threads