This message is a reply to an archived post by jdp8402 on November 29, 2010 at 16:05:12.
The original subject was "8030 Over Heating".
recore the rad the inside little tubes get pluged up after years of service and check the head gasket see if there is compression blowing bubles in the rad, run it with the cap off till it heat up and look in the rad
The original subject was "8030 Over Heating".
recore the rad the inside little tubes get pluged up after years of service and check the head gasket see if there is compression blowing bubles in the rad, run it with the cap off till it heat up and look in the rad
