Wc Front oil seal

Texas Denny · Dec 6, 2010

My 47 WC has started to leak from the front oil seal. Can this be replaced without pulling the pan? Thanks, Denny

bjb in TX from Ne · Dec 6, 2010

If I recall right from when I rebuilt my WC, Yes, you should be able to replace the front seal. The front seal is in the front cover. I think the oil pan seal on a lip that runs on the front block. You may want to get a manual to double check. If you can get the front pulley off, and get the seal out, you may even be able to replace it without removing the front cover.

JMS/.MN · Dec 6, 2010

Yes- remove the radiator and front pulley. If you take off the front cover, be sure to center it perfectly before tightening the bolts. There is a bit of flex in the seal, so support the cover before tightening.

Texas Denny · Dec 6, 2010

I"ve got the IT manual. Will try it this weekend.

Texas Denny · Dec 6, 2010

Thanks. Will giver 'er a try this week end.

Wc Front oil seal

Texas Denny

Member

bjb in TX from Ne

Member

JMS/.MN

Well-known Member

Texas Denny

Member

Texas Denny

Member

Similar threads