circle cleaned more dificulties HEY Pecosallis

charles craig · Jun 8, 2010

I scraped all the crud off of the circle. turned beautifully for a couple of rounds. then I think my trouble is in the hydraulics. after the pump warms up the circle doesnt want to move. what do you think?

Pecosallis · Jun 8, 2010

Chuck, does the circle rotate and while it is does it like jump or skip. Mine did that when I installed the power sideshift. it was a little loose and would jump then it would get stuck and even the Hyd motor would be turning because there was too much space. I Would have to place blade, the side I wanted to go back, down onto the ground,rotate the circle same way, and let out on the clutch to get it moving. I finally adjusted the two bolts on the three circle pads till there was little slop left. It has not done it in a while since then.

charles craig · Jun 9, 2010

after it once fails to turn it will always return but only can get a few degrees of turn after that. seems as it warms it doesnt want operate ??? CC

circle cleaned more dificulties HEY Pecosallis

charles craig

Member

Pecosallis

Member

charles craig

Member

Similar threads