trick to starters

Anonymous-0 · Feb 19, 2010

is there a trick to putting starters in got d14 It seems to be hitting the flywheel?? turned it all ways want go all the way in

Jeff Z. · Feb 19, 2010

I don"t know if it would make any difference but there were two different starters for the D14.
A six volt and after serial number 19001 there was a 12 volt.
Do you think the drive housing might not be right?

Anonymous-0 · Feb 19, 2010

looks like ser#5063

Anonymous-0 · Feb 19, 2010

this is the best i can make out with out sanding the new paint off damn for not writing it down when i could read it better trying to finish tractor before my grandfrather passes away it was his and his not doing to go right now i could have hours or weeks its bad he's 82 and i'm 31 he had it all my life rode on the cultivators when i was younger thanks for all the help ya'll people have given to me

BushogPapa · Feb 21, 2010

Joe, I know what you are up against and wish I could be of some help, but I don't know a thing about a D-14..

All I can give is the BEST of Luck and Hang in there..I KNOW he appreciates what you are doing...!!

Ron..

Anonymous-0 · Feb 21, 2010

I'm pretty sure that starter is held in with one bolt on the outside & is pointed. The starter has tapered hole line up the two & you should be all set. GOOD LUCK ! RON

trick to starters

Anonymous-0

Well-known Member

Jeff Z.

Well-known Member

Anonymous-0

Well-known Member

Anonymous-0

Well-known Member

BushogPapa

Well-known Member

Anonymous-0

Well-known Member

Similar threads