Welcome! Please use the navigational links to explore our website.
Company Logo (800) 853-2651 Shop Now
   Allis Chalmers Case Farmall IH Ford 8N,9N,2N Ford
   Ferguson John Deere Massey Ferguson Minn. Moline Oliver

Allis Chalmers Discussion Forum

Extreme Home Makeover Churning Dirt Richland Center, WI

Welcome Guest, Log in or Register
Author  [Modern View]
Jason Schultz

07-25-2008 07:16:57

Report to Moderator

third party image

Inviting all fans and pullers to Richland Center, WI this Saturday at 530pm. We are having 11 classes, 3 truck classes from Badger Truck Pullers: Open Stock, Super Stock and Super Street Diesel. Tractor Classes are 12500 Altered Farm, East Central Iowa Pullers Light Lim Pro 2 Hooks 6700 and 7200, this is the same class as the Badger State Lim Light Supers. East Central Iowa Pullers Heavy Lim Pro 2 Hooks 8500 and 9500, this class is very similar to Super Farm. The only difference is a Badger State Super Farm, would have to put a non slotted cover on the turbo, everything else is fine. NTPA, Outlaw and Tri State Tractors can run their regular setup for their organizations. Three classes of Mini Rods-Tri County mini rods. We have an antique tractor show from 12-5 at the fairgrounds, kids pedal pull for ages 4-13 starts at 3pm, monster truck at 9pm. Classic car show cruise is stopping at the fairgrounds around 430pm, and we are having Paige Hemmis and John Littlefield from Extreme Home Makeover Edition going to make an appearance at the pull, they are doing a family's house right here in Richland County. Thanks Jason Schultz 608-604-5068 All rules, contacts, info listed at Churning Dirt Nationals Website

[Log in to Reply]   [No Email]
[Options]  [Printer Friendly]  [Posting Help]  [Return to Forum]   [Log in to Reply]

Hop to:

We sell tractor parts!  We have the parts you need to repair your tractor - the right parts. Our low prices and years of research make us your best choice when you need parts. Shop Online Today. [ About Us ]

Home  |  Forums

Today's Featured Article - Earthmaster Project Progress Just a little update on my Earthmaster......it's back from the dead! I pulled the head, and soaked the stuck valves with mystery oil overnight, re-installed the head, and bingo, the compression returned. But alas, my carb foiled me again, it would fire a second then flood out. After numerous dead ends for a replacement carb, I went to work fixing mine.I soldered new floats on the float arm, they came from an old motorcycle carb, replaced the packing on the throttle shaft with o-rings, cut new ga ... [Read Article]

Latest Ad: Looking for 730 fuel,tank hood, carb, intake and other associated pipes, and entire dash pedestal with shaft and steering wheel(rebuildable carb) [More Ads]

Copyright © 1997-2022 Yesterday's Tractor Co.

All Rights Reserved. Reproduction of any part of this website, including design and content, without written permission is strictly prohibited. Trade Marks and Trade Names contained and used in this Website are those of others, and are used in this Website in a descriptive sense to refer to the products of others. Use of this Web site constitutes acceptance of our User Agreement and Privacy Policy

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Yesterday's Tractors - Antique Tractor Headquarters

Website Accessibility Policy