Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Oliver 1255 Parts

[ Turn Off Pictures ]

[Categories]   [All Oliver Models]   [Print]  


Brakes
Oliver 1255 Brake Band
Brake Band
- (50mm Wide) for tractor models:1250A, 1255, 1265, 1270, 1355, (1365, 1370 Prior to SN# 721487)(62204S) Replaces 31-2902130, 40 35 028, 5112676, 72093677, TX12850 (Part No: TX12850)
$49.78

Clutch
No
Picture
Dual Clutch Assembly
- 10 ", comes with drive disc and PTO disc, 12mm bolt holes and stepped bottom plate. For tractor models 1250A, 1255, 1265, 1270. NOTE: Check old clutch before ordering. (Part No: S.66750)
$916.21

Oliver 1255 Pilot Bearing (6303 ZZ)
Pilot Bearing (6303 ZZ)
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 676791A)
$6.57

Oliver 1255 Pressure Plate, 11 inch
Pressure Plate, 11 inch
- Dual, 6 Lever, Cast Iron, Independent PTO, with Rigid Metallic Clutch Disc. For tractor models G450, White 2-50, White 2-60, 1255, 1265, 1350, 1355, 1365, 1370. Replaces 72094463, 50 16 042, 5121198, 5145712, 5154879. (Part No: 5154879)
$350.82

Oliver 1255 Release Bearing
Release Bearing
- Fits 1255 (SN# 304967 and up. (62171S) (Part No: 31-2902010)
$45.54

Cooling System
Oliver 1255 Fan \ Generator Belt
Fan / Generator Belt
- This is a 0.453 inch X 45.57 inch wedge belt. Replaces A4897, A4897R, TX10276, 102752A, 303045080, 4796327, 4796328, 30-3045080 (Part No: A4897R)
$5.99

Oliver 1255 Fan, 4 Blade
Fan, 4 Blade
- Metal. For tractor models 1250 diesel, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Replaces 72089485. (Part No: 676700A)
$38.85

No
Picture
Radiator
- 17 1/2 x 17 1/2 x 3, 5 rows, comes with cap. For tractor models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Replaces 5118305, 5104821, 4981428, 5096052, 5096597, 5096051, 5096599, 677188AS, 303010910, 312902313, 303014223, 312903431, 72090517, 72093205, 72090619. (Part No: 211088)
$400.44

Oliver 1255 Thermostat (174 deg)
Thermostat (174 deg)
- This 168 degree thermostat fits Gas and Diesel Models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 700. Also replaces OEM #31-2905441, 72090518.677196A (Part No: 72090518)
$17.25

Oliver 1255 Water Pump Gasket Set
Water Pump Gasket Set
- Fits Models: 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Also replaces OEM #677205A, 677198A, 677199A, and 31-2900135. (Part No: 677201A)
$3.41

Oliver 1255 Water Pump Less Pulley
Water Pump Less Pulley
- For tractor models 1255, 1265, 1270, 1350, 1355, 1370, White 2-50, White 2-60. Replaces casting number 4603862, 2090472. (Part No: 72090472)
$90.17

Drive Train
Oliver 1255 Axle Bearing, Inner (6309)
Axle Bearing, Inner (6309)
- 45mm x 100mm x 25mm. For MOdels: 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 672414A)
$22.16

No
Picture
Axle Seal, Inner
- 55mm x 35mm x 12mm. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Also replaces OEM #31-2903392, 677332A, 30-3030121. (Part No: 31-2902234)
$3.17

Oliver 1255 Axle Seal- Outer
Axle Seal- Outer
- 72mm x 45mm x 10mm. Fits tractor models 1250, 1250A, 1255, (1265, 1270 SN# 310481>)1355, 1365, 1370. Also replaces OEM #670043A. (62316S) (Part No: 31-2902121)
$9.79

Oliver 1255 Counter Shaft, Transmission
Counter Shaft, Transmission
- For Oliver 1250A with Creeper, 1255, 1265, 1270 tractors (Part No: S.49999)
$135.34

Oliver 1255 Coupler, Transmission
Coupler, Transmission
- For Oliver 1250 Diesel, 1250A, 1255, 1265, 1270 Tractors (Part No: S.49994)
$91.70

Oliver 1255 Cross Kit-U Joint
Cross Kit-U Joint
- Fits on models 1255, 1355. 27mm x 74.5mm (02448S) (Part No: 30-3039153)
$16.23

Oliver 1255 Drawbar with Cleavis
Drawbar with Cleavis
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Replaces 30-3012484. (Part No: 677359A)
$136.77

Oliver 1255 Propeller Shaft, Transmission
Propeller Shaft, Transmission
- For Oliver Models: 1250 Diesel, 1250A, 1255, 1265, 1270 tractors. (Part No: S.49995)
$122.30

Oliver 1255 Shift Lever
Shift Lever
- For tractor models 1250, 1250A, 1255, 1265. Replaces 30-3054055. (Part No: 676449A)
$35.73

Oliver 1255 Synchro, Outer Cone, Transmission
Synchro, Outer Cone, Transmission
- For tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, (700 8 Speed). (Part No: 672736A)
$100.05

Oliver 1255 Synchro, Transmission
Synchro, Transmission
- For tractor models Oliver 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370 tractors. (Part No: 3672737A)
$20.68

Electrical System
Oliver 1255 Starter \ Light Switch with Keys
Starter / Light Switch with Keys
- This Switch is used on Oliver / White Models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, 2-50, 2-60 Replaces 677503AS (Part No: 72093881)
$29.00

Oliver 1255 Starter Button Switch
Starter Button Switch
- For tractor models (1250A SN# 360745 and up), (1255 SN# 303397 and up), 1265, 1270, (1355 SN# 503289 and up), 1365, 1370, White 2-50, White 2-60. Replaces 677478AS, 5109221. (Part No: 72091942)
$24.38

Oliver 1255 Starter Switch with Cold Start
Starter Switch with Cold Start
- For White/Oliver 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. Starter Switch with COLD START. Also replaces 72089444, TX10954. Back of switch has 2 wire connectors and 2 plug connectors (each plug is double spade). (Part No: 677481A)
$67.98

Oliver 1255 Starter-Standard
Starter-Standard
- 2.7Kwm, 11.5" overall length. For tractor models 1250A, 1255, 1265, 1270, White 2-50. Also replaces OEM #31-2903198, 31-2903227, 31-2904907. (Part No: 30-3043509)
$231.96

Oliver 1255 Voltage Regulator
Voltage Regulator
- For tractor models 1250A, 1255, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. (Part No: 30-3042863)
$29.98

Engine Bearings
No
Picture
Main Bearing
- Std (1 Pair for 1 journal - DOES NOT COME WITH THRUST WASHER). For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60. (Part No: 31-2900179)
$10.19

No
Picture
Main Bearing, .010
- 1 Pair. For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60. (Part No: 31-2900180)
$14.70

No
Picture
Main Bearing, .020
- .020" (1 pair). For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60. (Part No: 31-2900181)
$14.49

Oliver 1255 Rod Bearing, .010
Rod Bearing, .010
- 1 pair of shells. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 20-50, White 2-60, 700. Also replaces OEM #31-2900192. (Part No: 673382AS)
$11.79

Oliver 1255 Rod Bearing-.020
Rod Bearing-.020
- 1 pair of shells. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700.Also replaces OEM #31-2900193. (Part No: 673383AS)
$15.43

Oliver 1255 Rod Bearing-Std
Rod Bearing-Std
- 1 pair of shells. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. Also replaces OEM #31-2900191. (Part No: 673381AS)
$9.50

Oliver 1255 Thrust Washer Set, Centered Tabs, .010
Thrust Washer Set, Centered Tabs, .010
- 4 Piece. For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60. (Part No: S.58943)
$22.80

Oliver 1255 Thrust Washer Set, Centered Tabs, Std
Thrust Washer Set, Centered Tabs, Std
- 4 Piece. For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60. Also replaces 677675A. (Part No: 31-2900010)
$18.60

Engine Gaskets
Oliver 1255 Front Crankshaft Seal
Front Crankshaft Seal
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. Also replaces OEM #676780A. (Part No: 30-3014363)
$5.45

No
Picture
Gasket Set, Full
- Full gasket set for Model 1255. (Part No: S.62078)
$104.05

Oliver 1255 Rear Crankshaft Seal
Rear Crankshaft Seal
- 120mm x 95 x 12. Fits tractor models 1250A, 1255, 1355, (1365, 1370 prior to SN# 460527). Also replaces OEM #30-3027333, 30-3042898. (62071S) (Part No: 676756A)
$6.64

Engine Parts
Oliver 1255 Camshaft
Camshaft
- Camshaft 3 cylinder, Less Gear. For tractor models 1250A, 1255, 1265, 1270, White 2-50. (Part No: 676843A)
$120.83

Oliver 1255 Camshaft Bearing-Set of 3
Camshaft Bearing-Set of 3
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. All using Fiat 4-cyl gas engine. Also replaces #676845A, 676846A. (Part No: 676844A)
$27.09

Oliver 1255 Connecting Rod with Bushing
Connecting Rod with Bushing
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 676805AS)
$151.43

No
Picture
Crankshaft
- 3 cylinder (6 bolt) for tractor models 1250A, 1255, 1265, 1270 (Part No: 676787AS)
$602.95

Oliver 1255 Crankshaft Pulley
Crankshaft Pulley
- For tractor models 1250A, 1255, 1265, 1270, White 2-50. Replaces 676860A. (Part No: 30-3014193)
$62.72

Oliver 1255 Ring Gear
Ring Gear
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. 110 teeth. Replaces 04602143, 4602143, 4602143, 153623541, 153623568, 82982157, 0673743, 0673742 (Part No: 676786A)
$66.24

Oliver 1255 Rod Bushing
Rod Bushing
- 35mm long, 35mm O.D., 32mmID. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 676795A)
$4.65

Oliver 1255 Valve Guide
Valve Guide
- For tractor models 1250 (diesel intake only), 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, intake and exhaust. Also replaces part #676838A. (Part No: 670162A)
$3.33

Oliver 1255 Valve Spring
Valve Spring
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. Also replaces OEM #31-2903660. (Part No: 31-2902929)
$5.24

No
Picture
Valve, Intake
- Intake Valve fdr tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. Also replaces OEM #30-3043223. (Part No: 677842A)
$11.42

Engine Pistons and Sleeves
No
Picture
Piston
- 1 cylinder, with rings - 95mm. For tractor models 1250A, 1255, 1355 (Part No: 676806A)
$121.29

No
Picture
Piston Liner
- Piston liner (1 cylinder)-95mm-unfinished. For tractor models 1250A, 1255, 1355. (Part No: 676727A)
$32.16

Engine Rings
Oliver 1255 Ring Set-95mm-1 Cylinder
Ring Set-95mm-1 Cylinder
- Fits tractor models 1250A, 1255, 1355. (62026S) (Part No: 673386AS)
$32.43

Exhaust System
Oliver 1255 Manifold
Manifold
- For 3 Cylinder models: 1250A, 1255, 1265, 1270, White 2-50.677138A (Part No: 4607842)
$65.01

Fuel System / Air Intake
No
Picture
Air Cleaner Element
- For tractor models White/Oliver 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60. (Part No: 676920A)
$41.55

Oliver 1255 FUEL TANK
FUEL TANK
- This fuel tanks fits models: 1240A, 1255, 1265, 1270, 1355, 1370, 1450, 1465, 1470, 2-50, 2-60. Replaces 676893AS (Part No: S.69974)
$285.60

Oliver 1255 Fuel Bowl, Short
Fuel Bowl, Short
- This Glass Fuel Filter bowl has a 3 5/8 inch outside diameter, is 1 3/4 inches tall, and a 3/4 inch bottom hole. It is used on Oliver/ White models 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60, 700. Replaces original part number 676989A (Part No: 1039071M1)
$4.79

Oliver 1255 Fuel Filter Assembly
Fuel Filter Assembly
- This Fuel Filter assembly comes with a metal bowl. For tractor models 1250A, 1255, 1265, 1270, 1355, White 2-50.676949AS (Part No: S.60425)
$36.60

Oliver 1255 Fuel Filter Assembly, Single
Fuel Filter Assembly, Single
- This is a Single Filter Assembly with Glass Bowl. Ports are 1/2 inch x 20 pitch. Includes bleeder port and screw. Replaces original part number 676949AS. (Part No: 1446017M91)
$31.95

Oliver 1255 Fuel Filter, Final
Fuel Filter, Final
- Fuel Filter for tractor models 550, 660, 770, 880, 1600, 1650 up to serial number 187586, 1550, 1555. Filter measures 3 7/16 inches outside diameter and 2 3/4 inch tall. All with Diesel Engines. Replaces 609689AS, 159044AS, 159044AS, 20-7100980, 20-7100980 243190601. (Part No: CAV7111296)
$2.79

Oliver 1255 Fuel Tank, Shut Off
Fuel Tank, Shut Off
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. Replaces 72092001. (Part No: 670990A)
$16.98

Oliver 1255 Injector Line Set
Injector Line Set
- For tractor models 1250A, 1255, 1265, 1270, White 2-50. (Part No: S.67208)
$44.04

No
Picture
Injector Nozzle, 4 Hole
- For tractor models 1250A, 1255, 1355. (Part No: 676933A)
$42.77

Oliver 1255 Precleaner Assembly
Precleaner Assembly
- For tractor models 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Replaces 115 05 014, 31-2900092, 31-2905142, 4997662, 651823, TX10203. (Part No: 31-2900092)
$21.52

Gauges
Oliver 1255 Instrument Cluster Assembly
Instrument Cluster Assembly
- For 1255, 1265, 1270, 1355, 1365, 1370 and White 2-50. Complete Instrument Cluster Assembly. Order Tractormeter Cable Separately: Part No. 62263S Individual parts available are: #62414S Tractormeter, #61462S Fuel & Temp Gauge. (Part No: 31-2900134)
$149.90

Oliver 1255 Instrument Panel Assembly
Instrument Panel Assembly
- For tractor models 1255, 1265, 1270, 1355, 1365, 1370, White 2-50. (Part No: 31-2905054)
$149.90

No
Picture
Tachometer & Hourmeter
- Includes Right Angle Tach Drive for tractor models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 677532A)
$76.34

Oliver 1255 Tachometer Cable
Tachometer Cable
- Cable is 32 1/2" long. Fits tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 676852AS)
$17.39

Oliver 1255 Tachometer Drive Adapter
Tachometer Drive Adapter
- This Tachometer Drive Adapter is engine mounted. It has 18mm cable threads and 20mm engine side threads. Verify measurements, as more than one size cable side were used. Replaces 72091912, 676855AS, 31-2905869. Used on White / Oliver models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60 (Part No: 4717707)
$16.89

Oliver 1255 Tachometer Drive, Right Angle
Tachometer Drive, Right Angle
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. (Part No: 677530A)
$26.85

No
Picture
Temperature & Fuel Gauge
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Also replaces 31-2905055. (Part No: 31-2900017)
$65.77

Oliver 1255 Water Temperature Sender
Water Temperature Sender
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60, 700. (Part No: 677194A)
$17.22

Hitch / Drawbar
Oliver 1255 Leveling Box Assembly
Leveling Box Assembly
- With Hand Crank Assembly for tractor models: 1250A, 1255, 1265, 1270. Replaces 30-3056031, 4982390, 677469AS, 72090200 (Part No: 677469A)
$121.04

Hydraulic System
No
Picture
Hydraulic Cover Bushing
- For tractor models 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. (Part No: 670817A)
$6.25

Oliver 1255 Hydraulic Filter
Hydraulic Filter
- This Hydraulic Filter measures 8 inches in length, an outside diameter of 1 3/4 inches and inside diameter of 15/16 of an inch. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 31-2902057)
$19.32

Oliver 1255 Hydraulic Pump Seal and O-Ring Kit
Hydraulic Pump Seal and O-Ring Kit
- FITS ORIGINAL PUMP ONLY! For tractor models 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60, 700. (Part No: 30-3002659)
$20.12

Lights
No
Picture
Tail Light Set - Red
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, 2-50, 2-60. Replaces OEM numbers 677505AS, 30-3014177, 72094112. (Part No: 72094112)
$31.18

Oil System
Oliver 1255 Oil Pressure Switch
Oil Pressure Switch
- For tractor models 1250A, 1255, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60, 700. (Part No: 677149A)
$11.40

No
Picture
Oil Pump
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60, 700. (Part No: 30-3049426)
$81.45

Oliver 1255 Sump Seal-Front
Sump Seal-Front
- For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60, 700. (Part No: 676750A)
$1.83

Oliver 1255 Sump Seal-Rear
Sump Seal-Rear
- For tractor models 1250A, 1255, 1265, 1270, 1365, 1370, White 2-50, White 2-60, 700. (Part No: 676754A)
$1.67

Seats
Oliver 1255 Complete Suspension Seat
Complete Suspension Seat
- Vinyl, Black. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60. (Part No: S.68483)
$199.49

Oliver 1255 Seat Assembly
Seat Assembly
- Black Vinyl on Steel. Fits tractor models: 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055. (Part No: R0983)
$468.63

Oliver 1255 Seat Assembly
Seat Assembly
- Cranberry Vinyl sides and Fabric Face on Steel. For tractor models 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055. (Part No: R2450)
$308.10

No
Picture
Seat Upper Back
- White Vinyl on Steel For 1255, 1355, 1450, 1550, 1555, 1650, 1655, 1750, 1755, 1850, 1855, 1950, 1955, 2050, 2055 (Part No: R2022)
$78.61

Sheet Metal / Body Parts
Oliver 1255 Battery Support
Battery Support
- For tractor models 1250A, 1255, 1265, 1270, 1355, (1365, 1370, White 2-50, White 2-60 2-wd only). Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: S.58958)
$215.21

Oliver 1255 Bumper
Bumper
- Fits tractor models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60. Add $15 additional shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: S.61053)
$124.06

Oliver 1255 Cowl, Rear
Cowl, Rear
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677618A)
$534.54

Oliver 1255 Fender, Round Style, LH
Fender, Round Style, LH
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370. NOTE: Picture shows both fenders for clarity. THIS IS FOR 1 FENDER, LEFT hand side - (as you are sitting on tractor). (Part No: 677655A)
$215.21

Oliver 1255 Fender, Round Style, RH
Fender, Round Style, RH
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370. NOTE: Picture shows both fenders for clarity. THIS IS FOR 1 FENDER, Right hand side. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677654A)
$215.21

Oliver 1255 Grill
Grill
- Front Grille without upper screen. For Models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370. Also replaces 677825A Grill. Upper Screen is available separately as part number 673392A. (Part No: 673407A)
$180.78

No
Picture
Grill Pad
- Two used per tractor, sold individually. For tractor models 1250A, 1255, 1355, 1265, 1270, 1365, 1370, 1465, 1470. Replaces 577612A, 30-3044009. (Part No: 72089763)
$1.65

Oliver 1255 Grill Pin
Grill Pin
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470. (Part No: 77615A)
$11.33

Oliver 1255 Grill Screen, Upper
Grill Screen, Upper
- Upper grill screen for: 1250A, 1255, 1265, 1270, 1355, 1365, 1370. Used with 673407A Grill. (Part No: 673392A)
$16.47

Oliver 1255 Hood
Hood
- For tractor models 1250A, 1255, 1265, 1270, White 2-50. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677620A)
$242.55

Oliver 1255 Hood Catch and Handle Kit
Hood Catch and Handle Kit
- This is a *Kit*. Fits with O 1250 (SN# 711542>), 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1450, 1465, 1470, 2-50, 2-60 (Part No: S.59057)
$14.43

Oliver 1255 Hood Cowl, Front
Hood Cowl, Front
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. Inspection Lid for top of cowl is available as part number 677607A. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677609A)
$286.32

Oliver 1255 Hood Pad
Hood Pad
- For tractor models 1250A, 1255, 1355, 1265, 1270, 1365, 1370, 1465, 1470. Replaces 677629A. (Part No: 72089747)
$1.65

Oliver 1255 Inspection Lid
Inspection Lid
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60, 700. (Part No: 677607A)
$37.05

Oliver 1255 Side Panel, Left
Side Panel, Left
- For tractor models 1250A, 1255, 1265, 1270, White 2-50. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677622A)
$138.07

Oliver 1255 Side Panel, Right
Side Panel, Right
- For tractor models 1250A, 1255, 1265, 1270, White 2-50. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: 677621A)
$137.92

No
Picture
Toolbox
- Original style tool box for Models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 2-50, 2-60. Measures 16.5 x 5 x 4.5 inches. (Part No: 72091939)
$32.13

Steering
Oliver 1255 Bushing-Axle Pin
Bushing-Axle Pin
- For tractor models 1250 Diesel, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Also replaces OEM #670211A. (Part No: 31-2901636)
$7.92

Oliver 1255 Power Steering Pump Hub
Power Steering Pump Hub
- This Power Steering Pump Hub / Coupler is used on Oliver / White models: 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, 2-50, 2-60, 700. It replaces OEM part numbers 4630543, 5118570, 05118570, 5118570, TX11903, 40 58 356, 40 58 355, 4058355, 30-3042685. This part is also used in Long, Fiat and UTB/Universal tractor models. (Part No: TX11903)
$11.63

Oliver 1255 Rocker
Rocker
- For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 677369A)
$198.83

Oliver 1255 Steering Arm
Steering Arm
- For Oliver: 1255(SN# 303397 & up), (1265, 1270 SN# 310481 & up), 1355, (1365, 1370 SN# 721488 & up). White: 2-50, 2-60, AC 5040, 5045, 5050. Steering Arm replaces 31-2902132, 72090447. Does not include Bushing part number 61974 and Pin part number 61973. (Part No: 30-3045978)
$137.50

Oliver 1255 Steering Arm Bushing
Steering Arm Bushing
- For tractor models 1250 Dsl, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 672548A)
$10.81

Oliver 1255 Steering Arm, LH
Steering Arm, LH
- For tractor models (1250A SN# 360745 and up), (1250 SN# 701881 and up), (1255 SN# 303397 and up), 1265, 1270, (1355 SN# 503289 and up), 1365, 1370, White 2-50, White 2-60. Replaces 672624A. (Part No: 72090116)
$84.03

Oliver 1255 Steering Arm, RH
Steering Arm, RH
- For tractor models (1250A SN# 360745 and up), (1250 SN# 701881 and up), (1255 SN# 303397 and up), 1265, 1270, (1355 SN# 503289 and up), 1365, 1370, White 2-50, White 2-60. Replaces 672545A. (Part No: 72090113)
$45.13

Oliver 1255 Steering Shaft-Keyed
Steering Shaft-Keyed
- For tractor models 1250A, 1255(2wd), 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60 above SN# 789610. (Part No: 677367A)
$133.85

Oliver 1255 Steering Wheel-Keyed
Steering Wheel-Keyed
- NOT LIKE ORIGINAL. Will replace those wheels that measure: 17 Inch diameter, 7/8 tapered hub with 7/32 keyway. Offset is 5.5 inches. For tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 1450, White 2-50, White 2-60. (Part No: 672581A)
$29.64

Oliver 1255 Tie Rod End
Tie Rod End
- 20mm adjustment thread, A= 3.156", B= M20 1.0 RH thread. For tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-60. (Part No: 72090115)
$27.68

Oliver 1255 Tie Rod End
Tie Rod End
- A=81.3, B=M20x1", C=16.05, D=14.83, E=20.55, F=17.58, G=13.84. For tractor models 1250 Outer, 1250A Inner, 1255 Inner, 1265 Inner, 1270 Inner, 1355 Inner, 1365 Inner, 1370 Inner, White 2-50 Inner, White 2-60 Inner. Also replaces OEM #72090115. (Part No: 672550AS)
$29.85

Oliver 1255 Tie Rod End
Tie Rod End
- A=97.2, B=M28x1.5", C=18.29, D=16.76, E=21.03, F=18.06, G=13.77. Fits tractor models 1250(4WD), 1250A(4WD), 1255(4WD), 1355(4WD), 1450(2WD-RH), 1450(4WD). (63166S) (Part No: 675530A)
$71.55

Oliver 1255 Tie Rod End
Tie Rod End
- This tie rod is 15.750 inches from center of ball joint to end for rod and has a rod diameter of 0.789 inches. Fits tractor models 1365(Outer), 1270(Outer), 1355(Outer), 1370(Outer), White 2-50(Outer), White 2-60(Outer), 1250A(Outer), 1255(Outer), 1265(Outer). Also replaces OEM 566196, VPJ3169, 677373AS, 30-3012581, 303012581, 566196, 594409, 677373AS, 72090130, 589584 (Part No: 30-3012581)
$41.09

Oliver 1255 Tie Rod End, Power Steering Cylinder
Tie Rod End, Power Steering Cylinder
- A=3-1/2" x B=1-1/2" Fine thread. For tractor models 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. Replaces 72090171. VERIFY OEM PART NUMBER TO ENSURE CORRECT FIT. (Part No: 30-303253)
$26.16

Wheels
Oliver 1255 Front Rim
Front Rim
- 4.5 x 16, uses 6.0 x 16 tires. For tractor models 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 670290A)
$117.64

Oliver 1255 Front Wheel Seal
Front Wheel Seal
- For tractor models (1250 SN# 360745 and up), (1255 SN# 303397 and up), (1265, 1270 SN# 000001 to 310480), (1355 SN# 503289 and up), (1365, 1370 SN# 000001 to 721487). (Part No: 72089040)
$26.29

Oliver 1255 Stop Body Screw, Single
Stop Body Screw, Single
- This stop body screw for the rear wheel rim is used with power adjust rims PAR10X28, C5NN1050J and C5NN1050H. Replaces: 100094A, T14752. YOU MAY RECEIVE A HEX HEAD OR SQUARE HEAD. (Part No: C0NN1058A)
$3.53

Oliver 1255 Wheel 12X28
Wheel 12X28
- Power Adjust Rim, 12 inches x 28 inches, 4 rail type. For Double Ramp Clamp. Holes in rail for Stop Body Screw are drilled parallel to axle (not at angle). For Oliver Tractors: Super 55, 1250, 1250A, 1255, 1265, 1270, 1355, 1365, 1370, 550, 1600, 1650, 1655. For White Tractors: 2-44, 2-50, 2-60. Replaces: 100047AS, 156072A. (Part No: 1687615M91)
$406.87



Accessories / Supplies
Oliver 1255 Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
Oliver 1255 Brake Rivet Tool
Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

Oliver 1255 Brake Rivet Tool, Large
Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$86.25

Cooling System
Oliver 1255 Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

Oliver 1255 Radiator Drain Tap
Radiator Drain Tap
- This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: 1KS517, KS517, S2634. (Part No: C9NN8115A)
$3.75

Oliver 1255 Zip Leak - Industrial Radiator Stop Leak
Zip Leak - Industrial Radiator Stop Leak
- A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.23

Decals and Emblems
Oliver 1255 Oliver Shield Decal
Oliver Shield Decal
- 3/4 inch. printed on vinyl. Decal size is 3/4 inch by 3/4 inch. (Part No: R5239)
$2.33

Drive Train
Oliver 1255 Lucas Hub Oil (quart)
Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.05

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

Oliver 1255 Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Oliver 1255 Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$12.71

Oliver 1255 Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

No
Picture
Battery Hold Down
- Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$16.55

No
Picture
Battery Hold Down
- Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

Oliver 1255 Battery Hold Down Bolts - Pair
Battery Hold Down Bolts - Pair
- These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$10.47

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.83

Oliver 1255 Coil Bracket
Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$3.57

Oliver 1255 Coil, High Performance (Black), 12 Volt, Epoxy Filled
Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.43

Oliver 1255 Coil, High Performance (Black), 12 Volt, Oil Filled
Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$36.05

Oliver 1255 Coil, High Performance (Black), 6 Volt, Epoxy Filled
Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$45.43

Oliver 1255 Coil, High Performance (Black), 6 Volt, Oil Filled
Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$44.90

Oliver 1255 Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40601)
$45.43

Oliver 1255 Coil, High Performance (Chrome), 12 Volt, Oil Filled
Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$40.51

Oliver 1255 Coil, High Performance (Chrome), 6 Volt, Oil Filled
Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40001)
$40.51

Oliver 1255 Coil, Ultra High Performance (Black), Epoxy Filled
Coil, Ultra High Performance (Black), Epoxy Filled
- This coil is used with Ignitor II ignition kits. Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Delivers up to 45, 000 volts, enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111)
$50.16

Oliver 1255 Coil, Ultra High Performance (Black), Oil Filled
Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$43.40

Oliver 1255 Coil, Ultra High Performance (Chrome), Oil Filled
Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 0.6 Ohms resistance. For use with Ignitor II Electronic Ignition Module. (Part No: 45001)
$44.66

Oliver 1255 Magneto, Wico XH & XHD, Service & Parts Manual
Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4" reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8" reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Oliver 1255 Spark Plug
Spark Plug
- Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.83

Oliver 1255 Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Oliver 1255 Spark Plug Wire Set, 4 Cylinder, Univeral
Spark Plug Wire Set, 4 Cylinder, Univeral
- Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$13.40

Oliver 1255 Spark Plug Wire Set, Universal, 6 Cyl.
Spark Plug Wire Set, Universal, 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

Oliver 1255 Starter Switch
Starter Switch
- Used on models with 6 volt manual starters. Replaces B7392A (Part No: 9N11450A)
$11.76

Oliver 1255 Starter Switch
Starter Switch
- 4-position: LEFT=accessories, CENTER=off, RIGHT accessories and ignition, FAR RIGHT start. 4 stud terminals. 7/16 inch long mounting stem with 3/4 inch dia. 2 brass keys. 1 1/8 inch mounting nut. This does not fit all models. (Part No: 782979)
$7.13

Oliver 1255 Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

Oliver 1255 Stripper and Crimping Tool
Stripper and Crimping Tool
- Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$24.30

Oliver 1255 Tag for Starter\Generator, 12 Volt, Blank
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
Oliver 1255 Silicone Black RTV
Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.70

Oliver 1255 Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

Oliver 1255 Silicone Copper RTV
Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
Oliver 1255 Lucas Assembly Lube
Lucas Assembly Lube
- Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It is useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.52

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$114.46

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

Oliver 1255 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

No
Picture
Muffler Clamp, 1-1/2
- New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.19

Oliver 1255 Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

Oliver 1255 Muffler Clamp, 1-1\8
Muffler Clamp, 1-1/8
- New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

Oliver 1255 Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.93

Oliver 1255 Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

Oliver 1255 Muffler Clamp, 1-5\8
Muffler Clamp, 1-5/8
- New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.93

Oliver 1255 Muffler Clamp, 1-7\8
Muffler Clamp, 1-7/8
- New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$1.94

Oliver 1255 Muffler Clamp, 2
Muffler Clamp, 2
- New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.91

Oliver 1255 Muffler Clamp, 2-1\2
Muffler Clamp, 2-1/2
- New Clamp for 2-1/2" outside diameter Muffler Inlet (Part No: MC212)
$3.30

Oliver 1255 Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.14

Oliver 1255 Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

Oliver 1255 Muffler Clamp, 2-3\8
Muffler Clamp, 2-3/8
- New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

Oliver 1255 Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

Oliver 1255 Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

Oliver 1255 Muffler Clamp, 3-1\4
Muffler Clamp, 3-1/4
- New Clamp for 3 1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

Oliver 1255 Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

Oliver 1255 Muffler Clamp, 4-1\2
Muffler Clamp, 4-1/2
- New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

Oliver 1255 Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.70

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.84

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 2.250 inch pipe. (Part No: R1801)
$7.23

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$7.10

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$8.57

Oliver 1255 Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

Oliver 1255 Stainless Steel Clamp, 2 Inch
Stainless Steel Clamp, 2 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.42

Oliver 1255 Stainless Steel Clamp, 2.5 Inch
Stainless Steel Clamp, 2.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

Oliver 1255 Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

Oliver 1255 Stainless Steel Clamp, 3 Inch
Stainless Steel Clamp, 3 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

Oliver 1255 Stainless Steel Clamp, 3.5 Inch
Stainless Steel Clamp, 3.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

Oliver 1255 Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
Oliver 1255 Air Cleaner Filler
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Oliver 1255 Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits some Oliver and Cockshutt models. VERIFY FITTING MEASUREMENTS. Fits some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

Oliver 1255 Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

Oliver 1255 Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.86

Oliver 1255 Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

Oliver 1255 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

Oliver 1255 Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

Oliver 1255 Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$33.23

Oliver 1255 Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

Oliver 1255 Fuel Tank Repair Kit
Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

Oliver 1255 Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

Oliver 1255 Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

Oliver 1255 Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.80

Oliver 1255 Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

Oliver 1255 Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

Oliver 1255 Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.98

Gaskets
Oliver 1255 Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$15.75

Oliver 1255 Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Oliver 1255 Gasket Material, Exhaust Manifold
Gasket Material, Exhaust Manifold
- 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.78

Oliver 1255 Gasket Paper, .0160
Gasket Paper, .0160
- .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

Oliver 1255 Gasket Paper, .0275
Gasket Paper, .0275
- .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$24.15

Gauges
Oliver 1255 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

Oliver 1255 Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

Oliver 1255 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

Oliver 1255 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

Oliver 1255 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

Oliver 1255 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

Oliver 1255 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

Oliver 1255 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$23.03

Oliver 1255 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

Oliver 1255 Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
Oliver 1255 Center tube, Stablizer
Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.69

Oliver 1255 Check Chain & Pin Kit
Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$5.97

Oliver 1255 HAIR PIN ASSORTMENT
HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

Oliver 1255 HITCH BALL 10000LB 2-5\16
HITCH BALL 10000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

Oliver 1255 HITCH BALL 15000LB 2-5\16
HITCH BALL 15000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

Oliver 1255 HITCH BALL 2000LB
HITCH BALL 2000LB
- 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

Oliver 1255 HITCH BALL 3500LB
HITCH BALL 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Oliver 1255 HITCH BALL 5000LB
HITCH BALL 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Oliver 1255 HITCH BALL 5000LB 2-5\16
HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Oliver 1255 LINCH PIN, 10 Pack
LINCH PIN, 10 Pack
- Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

Oliver 1255 Lift Arm Bushing
Lift Arm Bushing
- This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

Oliver 1255 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Oliver 1255 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

Oliver 1255 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Oliver 1255 Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

Oliver 1255 Universal Drawbar Lock
Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$24.02

Oliver 1255 Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Oliver 1255 Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$4/9.47

Oliver 1255 Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$49.47

Hydraulic System
Oliver 1255 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Implements
Oliver 1255 Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

Oliver 1255 Axle Nuts (5)
Axle Nuts (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

Oliver 1255 Bearing Cup
Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

Oliver 1255 Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

Oliver 1255 Bush Hog Axle Spacer Bushing
Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

Oliver 1255 Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

Oliver 1255 Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

No
Picture
Graphite Lubricant
- Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

Oliver 1255 HUB with BRG CUPS
HUB with BRG CUPS
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

Oliver 1255 Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Part No: 241166)
$97.46

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Part No: 241163)
$109.42

Oliver 1255 Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

Oliver 1255 Tail Wheel Assembly
Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
Oliver 1255 Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Oliver 1255 Light Switch with Knob
Light Switch with Knob
- Universal switch, for 6 volt tractors. Verify style is correct for your model. (Part No: AA4667R)
$14.67

Oliver 1255 Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Oliver 1255 Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Oliver 1255 Safety Light Amber
Safety Light Amber
- 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$12.56

Oliver 1255 Work Lamp, HID, Flood Light
Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

Oliver 1255 Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Oliver 1255 Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Oliver 1255 Worklight 12 Volt
Worklight 12 Volt
- Red 12 Volt worklight with handle, on/off switch, swivels and rotates. (Part No: S.42792)
$32.03

Miscellaneous
Oliver 1255 Canopy
Canopy
- 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

Oliver 1255 Canopy Mounting Kit, 2 Post
Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$75.80

No
Picture
Canopy Mounting Kit, 4 Post
- Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

No
Picture
Canopy Mounting Kit, Hoop Type
- Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

Oliver 1255 Canopy, Small Tractors
Canopy, Small Tractors
- 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

Oliver 1255 Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

Oliver 1255 Deluxe Tractor Umbrella
Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

Oliver 1255 HAND CLEANER GALLON
HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Oil System
Oliver 1255 Lucas Heavy Duty Oil Stabilizer (quart)
Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$15.12

PTO / Driveline
Oliver 1255 Driveline Assembly
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

Oliver 1255 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

Oliver 1255 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

Oliver 1255 Overrun Coupler with Quick Release
Overrun Coupler with Quick Release
- This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$42.92


NOTE
PTO Adapter
- PTO adapters are located under the PTO category in the Accessories & Universal Parts section.
NOTE

Oliver 1255 PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
Oliver 1255 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

No
Picture
Acrylic Hardener, 16oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

No
Picture
Acrylic Hardener, 8oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$22.04

No
Picture
Aluminum Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$49.02

No
Picture
Black Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

No
Picture
Paint, Aluminum, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

No
Picture
Paint, Aluminum, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

No
Picture
Paint, Aluminum, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

No
Picture
Paint, Clear Coat, 1 Gallon
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

No
Picture
Paint, Clear Coat, 1 Quart
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

No
Picture
Paint, Clear Coat, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

No
Picture
Paint, Cockshutt Red, 1 Quart
- This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP185QT)
$20.61

No
Picture
Paint, Cockshutt Red, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Cockshutt Red is High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. Used on models from 1969-1975, 1555, 1655, 1755, 1855.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP185SP)
$47.78

No
Picture
Paint, Cockshutt Yellow, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175GAL)
$60.68

No
Picture
Paint, Cockshutt Yellow, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175QT)
$26.06

No
Picture
Paint, Cockshutt Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP175SP)
$52.74

No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

No
Picture
Paint, Gray Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

No
Picture
Paint, Gray Primer, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

No
Picture
Paint, Grey Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700SP)
$44.19

No
Picture
Paint, Med. Green, 1 Gallon
- This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221GAL)
$44.00

No
Picture
Paint, Med. Green, 1 Quart
- This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221QT)
$17.55

No
Picture
Paint, Med. Green, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This color is DARKER than Meadow Green and used on Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP221SP)
$44.19

No
Picture
Paint, Oliver Yellow, 1 Gallon
- This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224GAL)
$77.54

No
Picture
Paint, Oliver Yellow, 1 Quart
- This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224QT)
$35.75

No
Picture
Paint, Oliver Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** This Oliver Yellow was used on Oliver models from 1960 through 1970 and also on some Fleetline models. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP224SP)
$47.78

No
Picture
Paint, Red Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

No
Picture
Paint, Satin Black, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

No
Picture
Paint, Satin Black, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

No
Picture
Paint, Satin Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

No
Picture
Paint, Yellow Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

No
Picture
Paint,Gloss Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

No
Picture
Slip Resistant Coating
- Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$28.23

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)
$99.22

No
Picture
Tire Paint, Black
- Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Oliver 1255 Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Seats
Oliver 1255 Pan Seat, Universal
Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1/2 inch center to center on mounting holes, 1/2 inch by 1/2 inch center square. (Part No: B1865)
$54.12

Oliver 1255 Seat Belt
Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$41.67

No
Picture
Seat Belt, Universal
- Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)
$17.79

Oliver 1255 Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056V)
$1518.86

Oliver 1255 Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056)
$1437.23

No
Picture
Seat, Industrial
- Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

Oliver 1255 Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1050ATSP)
$89.37

Oliver 1255 Seat, Universal
Seat, Universal
- BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1060ATSP)
$89.37

Oliver 1255 Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

Oliver 1255 Seat, Universal
Seat, Universal
- Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BK)
$146.35

No
Picture
Seat, Universal
- Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

No
Picture
Seat, Universal
- Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

Oliver 1255 Tie-On Seat Cover
Tie-On Seat Cover
- Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00

Oliver 1255 Tie-on Seat Cover
Tie-on Seat Cover
- Green & Red, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2603)
$36.00

Oliver 1255 Universal Seat
Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

Oliver 1255 Universal Seat
Universal Seat
- Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

Oliver 1255 Universal Seat
Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Sheet Metal / Body Parts
Oliver 1255 2 Hour DVD - The How To of Sheetmetal Repair
2 Hour DVD - The How To of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

Oliver 1255 Battery Hold Down Bolt
Battery Hold Down Bolt
- These J-Bolts are 10 3/4 inches long with 5/16 inch 18 UNC thread. There is 2 inches of thread. Verify measurements before ordering. Replaces original part numbers 198185A1, 393161R1. (Part No: 198185A1)
$3.75

Oliver 1255 Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0140)
$31.59

Oliver 1255 Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

Oliver 1255 SAFETY STEP KIT
SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

Oliver 1255 Toolbox, RED
Toolbox, RED
- This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Oliver 1255 Toolbox, Universal
Toolbox, Universal
- Universal Toolbox Approx. 16 1/4 Inches X 4 3/4 Inches X 5 Inches. This is a Universal Part and Color varies depending on availability. (Part No: R2685)
$33.29

Steering
Oliver 1255 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

Oliver 1255 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$40.50

Oliver 1255 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

Oliver 1255 Steering Wheel Spinner, Black
Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$7.08

Oliver 1255 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Oliver 1255 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Oliver 1255 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$8.86

Oliver 1255 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$8.75

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

Oliver 1255 Chain Binder
Chain Binder
- 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

Oliver 1255 Chain Binder
Chain Binder
- 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

Oliver 1255 Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

Oliver 1255 Combination Wrench Set
Combination Wrench Set
- This combination wrench set is 11 pieces. Each wrench is made of chrome vanadium steel. This set comes in a handy storage rack and includes a LIFETIME UNCONDITIONAL WARRANTY. The SAE sizes range from 1/4 to 7/8 inch. (Part No: W1061)
$12.60

Oliver 1255 Cotter Pin Assortment
Cotter Pin Assortment
- This pin assortment contains 150 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 1/8 inch x 2 inches, 5/32 inch x 2 1/2 inches, 3/16 inch x 3 inches, 1/4 inch x 2 inches, 1/4 inch x 3 inches, 5/16 inch x 2 1/2 inches. (Part No: W5206)
$10.76

Oliver 1255 Cotter Pin Assortment, Small
Cotter Pin Assortment, Small
- 560 piece assortment of 1/16 inch x 1 inch, 3/32 inch x 1 inch, 3/32 inch x 1-1/2 inches, 1/8 inch x 1-1/4 inches, 1/8 inch x 2 inches, 5/32 inch x 2-1/2 inches. All in convenient re-sealable plastic case. (Part No: W5205)
$7.98

Oliver 1255 Digital Calipers, Stainless
Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$29.21

Oliver 1255 GREASE GUN
GREASE GUN
- GREASE GUN. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

Oliver 1255 GREASE GUN
GREASE GUN
- Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

Oliver 1255 GREASE GUN
GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

Oliver 1255 GREASE GUN CLAMP
GREASE GUN CLAMP
- Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

Oliver 1255 GREASE GUN POWERLUBER 14.4V BATTERY
GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

Oliver 1255 GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
GREASE GUN POWERLUBER 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

Oliver 1255 GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
GREASE GUN POWERLUBER 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

Oliver 1255 GREASE HOSE 12 INCH
GREASE HOSE 12 INCH
- 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

Oliver 1255 GREASE HOSE 18 INCH
GREASE HOSE 18 INCH
- 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

Oliver 1255 Hair Pin Assortment
Hair Pin Assortment
- This hair pin assortment contains 150 pieces. It includes 6 different sizes from: 3/32 x 1 3/16 inches to 5/32 x 2 15/16 inches. All in a convenient re-sealable plastic case. (Part No: W5210)
$6.57

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Part No: S58474)
$267.39

Oliver 1255 Hobby Tool Kit
Hobby Tool Kit
- This is a complete knife kit. It comes with a 3 inch caliper, tweezers, a precision screwdriver, 28 blades, and a carrying case. (Part No: W1709)
$18.87

Oliver 1255 Hose Clamps Assortment
Hose Clamps Assortment
- This hose clamp assortment contains 26 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 5/8 inch, 7/8 inch, 1 inch, 1 1/16 inches, 1 1/4 inches and 1 1/2 inches. (Part No: W5348)
$6.83

Oliver 1255 Main Seal Installer\Remover
Main Seal Installer/Remover
- This kit helps with the removal and installation of upper rear main seals on many tractor engines without removing the engine or the crankshaft. This kit contains a corkscrew removal tool, a T-handle, and a wire with a clip for pulling new seals into their place. It also includes 2 extra clips. (Part No: W84019)
$5.33

Oliver 1255 O-Ring Assortment
O-Ring Assortment
- This O-ring assortment contains 407 pieces in 32 different sizes, all in a convenient re-sealable plastic case. Each O-ring is made of a high quality nitrile butadiene rubber and range in size from 1/4 inch outside diameter to 2 1/4 inches outside diameter. (Part No: W5202)
$13.95

Oliver 1255 Rotary Tool Kit
Rotary Tool Kit
- This 80 piece rotary tool kit includes: a hand held rotary tool that turns at 1600 rpm, cut off wheel mandrel, polishing cloth wheels, mandrel for polishing cloths, carbide burr, collets, sanding drums and sleeves, buffing wheels, dressing stone, and drill bits. This kit is great cutting, grinding, polishing, sharpening, and drilling. (Part No: W50083)
$13.49

Oliver 1255 Rubber Grommet Assortment
Rubber Grommet Assortment
- This rubber grommet assortment contains 125 pieces in 18 different sizes, all in a convenient re-sealable plastic case. The sizes range are from 1/8 inches x 9/32 inches to 1 inches. (Part No: W5214)
$7.91

Oliver 1255 Screwdriver Set
Screwdriver Set
- This screwdriver set is 30 pieces. It contains 7 screwdrivers that range in size from 1/4 to 6 inches, a magnetic bit driver, 6 precision screwdrivers, and 14 power bits, all contained in a plastic rack. (Part No: W1718)
$18.54

Oliver 1255 Spring Assortment
Spring Assortment
- This spring assortment contains 200 pieces. It includes compression type sizes from: 9/32 inch x 1/2 inch to 7/32 inch x 1 1/2 inches and extension type sizes from: 13/64 inch x 13/16 inch to 11/32 inch x 1 7/16 inches. (Part No: W5200)
$6.87

No
Picture
T-Handle Hex Key Set
- This T-Handle hex key set is 10 pieces (SAE). Each key is made of a high quality carbon steel with a black oxide finish that resists corrosion. The PVC T-Handle grips are added for better torque and comfort. This set also comes with a mountable hand storage rack. The sizes are: 3/32 inch, 7/64 inch, 1/8 inch, 9/64 inch, 5/32 inch, 3/16 inch, 7/32 inch, 1/4 inch, 5/16 inch and 3/8 inch. (Part No: W80274)
$14.90

Oliver 1255 Valve Spring Tool
Valve Spring Tool
- Universal valve spring tool compresses springs without needing to remove the cylinder head. For most overhead valve engines. It's adjustable cam handle keeps the tool correctly adjusted for the entire job. It comes with a complete list of instructions. (Part No: W80567)
$23.43

Oliver 1255 Winch Remote, Wireless
Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

Oliver 1255 Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

Oliver 1255 Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

Oliver 1255 Winch Set, 3500 Lb
Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Oliver 1255 Wire Terminal Assortment
Wire Terminal Assortment
- This wire terminal assortment is 160 pieces and contains 19 of the most popular sizes and types of wire terminals. This kit comes in a convenient re-sealable plastic case. (Part No: W5213)
$13.13

Oliver 1255 Woodruff Key Assortment
Woodruff Key Assortment
- This key assortment contains 80 pieces. All in a convenient re-sealable plastic case. It includes 10 of each of the following sizes: 3 x 5 x 13 MM, 3 x 6.5 x 16 MM, 4 x 5 x 13 MM, 4 x 6.5 x 16 MM, 4 x 7.5 x 19 MM, 5 x 7.5 x 19 MM, 5 x 9 x 22 MM, and 6 x 9 x 22 MM. (Part No: W5341)
$9.54

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
Oliver 1255 Front Rim
Front Rim
- This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 100014A, 30-3040003 (Part No: FW60166)
$61.71

Oliver 1255 Power Adjust Rim
Power Adjust Rim
- 11 inch x 28 inch, 4-rail type. For double ramp clamp. Holes in rail for stop body screw are drilled parallel to axle (not at angle). Use with stop body C0NN1057A, stop body screw C0NN1058A, clamp E5NN1043AA. Fits tire size 12.4 inches x 28 inches, 13.6 inches x 28 inches. Additional $25.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: 100086A. (Part No: C5NN1050H)
$405.80

Oliver 1255 Rear Rim Carriage Head Bolt and Nut
Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5/8 diameter FF Carriage Head Bolt with nut. (Part No: HB250)
$3.75

Oliver 1255 Stop Body
Stop Body
- Fits various tractors models with power adjust rims. Replaces part numbers: 100093A and T19271. (Part No: C0NN1057A)
$14.67

Oliver 1255 TIRE GAUGE
TIRE GAUGE
- Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

Oliver 1255 TIRE GAUGE DIAL
TIRE GAUGE DIAL
- Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

Oliver 1255 Tire Bead Buster
Tire Bead Buster
- Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

No
Picture
Tire Gauge, Heavy Duty
- Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

Oliver 1255 Tire Inner Tube
Tire Inner Tube
- This Tire Inner Tube is used with 4.00 x 12, 4.50 x 12 and 4.80 x 12 tires. Has a TR-13 valve stem. Valve height 1.38 inch, diameter 0.46 inch. (Part No: 400X12TB)
$17.25

Oliver 1255 Tire Inner Tube
Tire Inner Tube
- This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$16.00

Oliver 1255 Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

No
Picture
Tire Paint, Black
- Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

Oliver 1255 Tire Tube
Tire Tube
- For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$16.43

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$41.39

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$43.47

No
Picture
Tire Tube 28 Inch
- This 28 inch tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$53.89

No
Picture
Tire Tube 32 Inch
- This tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

No
Picture
Tire Tube 34 and 36 Inch
- This tire tube is used for all tractors with the following tires: 10.00 x 34, 11.00 x 34, 11.2 x 34, 12.00 x 34, 12.4 x 34, 10.00 x 36, 11.00 x 36, 11.2 x 36, and 12.4 x 36. (Part No: WHS063)
$54.80

No
Picture
Tire Tube 38 Inch
- This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: WHS064)
$53.48

Oliver 1255 Tire Valve Fluid Adapter
Tire Valve Fluid Adapter
- FOr ballast. (Part No: S.61167)
$20.92

No
Picture
Tire and Tube
- This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

Oliver 1255 Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$50.99

Oliver 1255 Tire, Three Rib
Tire, Three Rib
- This is a Triple Rib, 4 ply 4.50 X 12 triple. This tire is not designed for tubeless use. Uses 400X12TB tube, sold separately. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 450X12)
$44.65

Oliver 1255 Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$77.43

Oliver 1255 Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$51.77

Oliver 1255 Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 6.00 inches x 16 inches. Designed to be used with tube (part number WHS050). 4 Ply. Additional $25 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 600X16)
$63.35

CategoriesAll 1255 Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
Oliver 1255 Manuals
1255 Dsl, Util, Orchard, FWA - Includes Wiring Diagram Service Manual 194 Pages (Part No: OL-S-1250A+) $39.95

1255 Dsl, Util, Orchard, FWA Parts Manual 260 Pages (Part No: OL-P-1250A+) $43.95

1255 Dsl, Util, 4WD, Orchard Operators Manual 62 Pages (Part No: OL-O-1255) $20.95

Miscellaneous Related Items
Hat
Oliver 1255 Vintage Oliver solid green hat
Vintage Oliver solid green hat
- The old split-shield style logo on a solid green hat. (Part No: VOSG)
$13.95

Oliver 1255 New Oliver solid green hat
New Oliver solid green hat
- The newer style Keystone logo on a solid green hat. (Part No: NOSG)
$13.95

Oliver 1255 Hart Parr solid green hat
Hart Parr solid green hat
- 6 panel hat with brass size-adjuster, Hart Parr shield logo sewn on for durability. (Part No: HPSG)
$13.95

Oliver 1255 Vintage Oliver green mesh hat
Vintage Oliver green mesh hat
- 6 panel low profile, plastic snap size-adjuster. (Part No: VOGM)
$13.95

Oliver 1255 Keystone Oliver green mesh hat
Keystone Oliver green mesh hat
- 6 panel low profile, 65% cotton, 35% polyester with 100% nylon mesh back. (Part No: NOGM)
$13.95

No
Picture
Hart Parr solid green mesh hat
- plastic-snap size adjuster, 6 panel hat. (Part No: HPGM)
$13.95

Oliver 1255 Keystone Oliver solid black hat
Keystone Oliver solid black hat
- 65% polyester, 35% cotton, 6 panel, low profile. (Part No: NOSB)
$13.95

Oliver 1255 Vintage Oliver solid black hat
Vintage Oliver solid black hat
- Vintage Oliver logo sewn onto a solid black hat, 6 panel low profile hat. (Part No: VOSB)
$13.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All Oliver Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy