Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Oliver 1255 Parts

Category: Hydraulic System

[Categories]   [All 1255 Parts]   [All Oliver Models]  


No
Picture
Hydraulic Cover Bushing
- For tractor models 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60. (Part No: 670817A)
$6.25

Oliver 1255 Hydraulic Filter
Hydraulic Filter
- This Hydraulic Filter measures 8 inches in length, an outside diameter of 1 3/4 inches and inside diameter of 15/16 of an inch. Hole in both ends. For tractor models 1250A, 1255, 1265, 1270, 1355, 1365, 1370, White 2-50, White 2-60. (Part No: 31-2902057)
$19.32

Oliver 1255 Hydraulic Pump Seal and O-Ring Kit
Hydraulic Pump Seal and O-Ring Kit
- FITS ORIGINAL PUMP ONLY! For tractor models 1255, 1265, 1270, 1355, 1365, 1370, 1465, 1470, White 2-50, White 2-60, 700. (Part No: 30-3002659)
$20.12



Oliver 1255 Hydraulic Pump Mounting Bracket
Hydraulic Pump Mounting Bracket
- This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8" diameter, 4-3/16" center to center. Also 2 foot mount holes 3/8" diameter, 5" center to center. Center pilot hole 3-1/4" diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Part No: 33020-1)
$147.00

Oliver 1255 Hydraulic Pump, Front Mounted
Hydraulic Pump, Front Mounted
- This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE "A" Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Part No: 40P018LAJSA)
$428.82

Oliver 1255 PTO Mounted Hydraulic Pump
PTO Mounted Hydraulic Pump
- For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommednded hose sizes 1 1/4 inlet, 3/4 outlet. (Part No: HC-PTO-1A)
$953.75

Oliver 1255 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All 1255 Parts]   [All Oliver Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy