FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 150 Parts

Category: Hydraulic System

[Categories] [All MF150 Parts] [All Massey Ferguson Models]

Adapter Plate Bushing, Set of 4 - Set of 4 Rubber Bushing for front mount hydraulic adapter plates. For tractors: MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF235 orchard, MF245 orchard industrials: 20, 20C, 30, 30B, 30D, 35, 40, 40B, 40E, 50, 50A, 50C, 50D, 202, 203, 204, 205, 2135, 2200, 3165. Used in adapter plates 704812M93 and 708639M91. For 1134, 1143, 1144, 1153, 1163, 1164, 1183, 24, 260, 33, 34, 43, 44, 44-0, 44S, 540, 54C, 62, 63, 63C, 64, 82, 83 NOTE: Order 1 for a set of 4. (Item #: 173266, Ref: 1400022M91) $22.00

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 10 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 178, 180, 30, 31. Replaces OEM number 515957M1 (Item #: 190753) $184.00

Auxiliary Pump Drive Gear - This Auxiliary Pump Drive Gear has 58 teeth and 21 splines. It is used on Massey Ferguson models 135, 150, 165, 175, 20C, 20E, 230, 235, 240, 240S, 243, 245, 250, 250X Brazilian, 253, 255, 265, 270, 275, 283, 290, 30, 30E, 31, 40B, 451, 50C, 50E. Replace OEM number 1868540M1 (Item #: 187207) $176.00

Control Lever Roller - Used on Mark I and Mark II Massey Ferguson hydraulic pumps, this roller fits some of the following models: 20, 20C, 202, 203, 205, 2135, 2200, 30, 302, 304, 31, 3165, 40, FE135, 135, 135 UK, 150, 165, 175, 180, 230, 245 (Item #: 179419, Ref: 898202M1) $5.10

Control Valve Pin and Roller Kit - This Pin and Roller Kit is used on multiple Massey Ferguson Models in the control valve assembly. Replaces OEM part numbers: 897599M1, 897504M1X1, 897599M1X2, 897504M1 (Item #: 173324, Ref: 897504M1) $0.90

Cover Cap - For 1080, 1085, 130, 135, 150, 165, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 40, 50, 65, 85, MH50, TO35. Hydraulic Cover Cap, 2 bolt. Replaces 180908M1, 520933M91, 182373M91, 190809M1 (Item #: 167498, Ref: 180908M1) $20.00

Cross Shaft - 37 splines on ends, 42 splines in center, 2 inch bushing diameter used with 180910M1 lift arm and 181018M1 bushing. For the following tractors: 130, 135, 150, 165, 202, 203, 204, 205, 2135, INDUSTRIAL 25, 302, 304, 35, 50, 65, F40, MH50, TO35. (Item #: 160155, Ref: 184359M1) $83.01

Diaphram - 1.186 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 30, (FE135 Coventry). (Item #: 173206, Ref: 898254M91) $23.80

Dipstick - Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Item #: 111829, Ref: 193400M1) $10.70

Draft Control Boot - Draft Spring Rubber Boot. Fits Multiple Massey Ferguson Models. Replaces 1660439M1, 887654M1, 887654M2. (Item #: 169245, Ref: 887654M1) $3.10

Draft Control Plunger - This Draft Control Plunger has a 1.865 Inch Head Diameter. It replaces original part numbers 898136M1, 886348M2, 886351M1 (Item #: 163454, Ref: 898136M1) $19.10

Draft Control Plunger Spring - For tractor models 1080, 135, 150, 165, 175, 180, 202, 205, 20C, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30E, 3165, 35, 360, 362, 375, 392, 40, 40B, 40E, 50C, 50D, 50E, 65, 670, F40, MH50, TO35, TO30, TO20, TE20. Hydraulic Spring. Replaces 182582V1, 180998M1, 182582M1, 182582M1 (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Rod - This is a new Draft Control Rod. It is used on many Massey Ferguson Ag and Industrial applications. Replaces OEM number 898124M1 (Item #: 173302, Ref: 898124M1) $12.70

Draft Control Seat - This Draft Control Spring Seat is used on many Ferguson, Massey Ferguson and Massey Harris tractors. 1.780 inch inside diameter. It replaces OEM numbers: 719011M1, 182581M1, 886351M1, 889346M2, 886351M2 (Item #: 174656, Ref: 182581M1) $15.00

No
Picture
Draft Control Shaft - This Draft Control Shaft is used on 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E. Replaces 1870243M92 (Item #: 170866, Ref: 1870243M92) $12.00

Draft Control Spring - This New Draft Control Spring is used an many Massey Ferguson Ag and Industrial models. Replaces OEM numbers 898127M1, 898127M2, 1660323M1, 1660323V1 (Item #: 180233, Ref: 898127M2) $5.70

Dual Hydraulic Remote Valve Kit - This Dual Hydraulic Remote Valve Kit includes levers, hoses and Female couplers. Use with Pioneer 8010-4 series male plugs for the couplers (not included). Replaces Massey Ferguson part number 677421. (Item #: 168678, Ref: 677421) $450.00

Hydraulic Cylinder Stud Nut - Hydraulic Stud Nut is used with 899258M1 and 899257M1 Studs. It is 9/16 UNF Thread (Din 934). Replaces 368749X1 (Item #: 173194, Ref: 368749X1) $11.20

Hydraulic Cylinder Stud, 3 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 3 Inch Stud. Verify length before ordering. Replaces 1667579M1, 1667580M1, 1667580M2, 899258M1 (Item #: 173649, Ref: 899258M1) $7.70

Hydraulic Cylinder Stud, 4 Inch - Hydraulic Cylinder Stud is used with 190859M1 Cylinder. It is 9/16 inches in diameter (9/16 UNF Thread). This is used for replacement of 1/2 inch studs when re-drilling lift cover to accommodate the 9/16 studs. This is a 4 Inch Stud. Verify length before ordering. Replaces 1667579M2, 1667579M1, 908934M1, 899257M1. (Item #: 173644, Ref: 899257M1) $5.30

Hydraulic Diverter Valve - Hydraulic Diverter Valve made for 1080, 1085, 130, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 25, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 30, 302, 304, 30B, 30D, 30E, 31, 3165, 35, 360, 362, 375, 383, 390, 392S, 393, 398, 40, 0B, 40E, 50, 50C, 50D, 50E, 65, 85, MH50, TO35 ALL WITH 3/8 inch NPT ports. Verify the diagonal bolt pattern of the part in the picture as this only fits in place of existing cover plate (180908M1 or 182373M91). Hydraulic supply continues available for lift arms, or two additional ports are available along with a return to tank. Only one supply can be selected at a time with hydraulics isolated in other positions. (Item #: 161564, Ref: S.60032) $116.00

Hydraulic Filter Kit - This Kit contains 521451M1 filter, 185839M91 cap and 185555M1 bowl. It is used on Massey Ferguson models: 1080, 135, 145, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 245, 30, 31, 3165, 35, 35X, 40, 50, 65, FE35 (Item #: 184914, Ref: 185839M92) $27.40

Hydraulic Lever, Tension Bolt and Spring Kit - This Hydraulic Lever, Tension Bolt and Spring Kit is used on multiple Massey Ferguson Models. Replaces: 181041M1, 961469M1, 961369M1. (Item #: 173300, Ref: 181041M1) $2.70

Hydraulic Pump - Dynamatic - For Massey Ferguson tractor models 135, 150, 165, 175, 178, 235, 245, 255, 265, 275, 451, 471, 481, Compatible with Massey Ferguson Construction and industrial models 20C, 30E, 40B, 50C, 50D, 50E, Replaces Massey Ferguson OEM number 886821M94, Genuine Dynamatic pump, Manufactured to exact OEM specifications, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, For an economy version of this item use Item #: 119896, (Item #: 157747) $365.00

Hydraulic Pump Camshaft - This new Hydraulic Pump Camshaft has 10 Splines. It is used on some Massey Ferguson Models: 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 2135, 285, 30, 31, 3165, 40, 50. Some of these models used a 21 spline shaft. Verify before ordering. Replaces part numbers: 1809105M91, 1809048M1, 889154M91, 899154M91, 899915M92 (Item #: 165602, Ref: 1809105M91) $83.00

Hydraulic Pump Filter O-ring - This O-Ring is used with 185555M1 cap and Bowl Set. (Item #: 178156, Ref: 831907M1) $0.50

No
Picture
Hydraulic Pump Kit - For Massey Ferguson tractor models TO35, 35, 35X, 50, 65, 135, 150, 165, 175, Compatible with Massey Ferguson Construction and industrial models 202, 302, 304, 2135, Replaces Massey Ferguson OEM number 556601, Kit Contains: (2) Valve Chamber Assembly, (2) Piston, (1) Front Camblock, (1) Lift Block, (4) Piston Rings, (1) Seal Kit, (2) Repair Kit, (Item #: 174219) $196.00

No
Picture
Hydraulic Pump Kit, MK III, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 230, 231, 233, 234, 235, 240, 243, 245, 250, 253, 254, 255, 260, 261, 263, 265, 265S, 273, 274, 275, 283, 284, 285, 285S, 290, 294, 298, 340, 342, 350, 353, 353LX, 355, 356, 360, 362, 363, 364, 364S, 365, 372, 373, 374, 374S, 375, 377, 382, 383, 384, 384S, 387, 390, 390T, 393, 394, 394S, 396, 397, 398, 399, 440, 550, 560, 565, 575, 590, 592, 595, 675, 690, 698, 699, 1200, 1250, 4225, 4235, 4240, 4245, 4260, 4265, 4270, 4315, 4325, 4345, 4355, 4360, 4365, 4370, Compatible with Massey Ferguson Construction and industrial models 20B, 20D, 20E, 30D, 30E, Replaces Massey Ferguson OEM number 1810860M93, 1810860M92, Mark III Pump, 25 mm, (Item #: 168738) $214.50

Hydraulic Pump Kit, MKII Piston, 25 mm - For Massey Ferguson tractor models 133, 135, 140, 148, 150, 154, 155, 158, 165, 168, 174, 175, 178, 184, 185, 188, 194, 595, 1080, 1200, Compatible with Massey Ferguson Construction and industrial models 194, Replaces Massey Ferguson OEM number 1810859M91, 1810859M10, Mark II Pump, (Item #: 168705) $234.68

Hydraulic Pump O-Ring and Gasket Kit - This O-Ring and Gasket Kit is used on 135, 150, 165, 175, 180, 255, 265, 275, 30, 31, 40, 3165. It replaces 1810684M92 (Item #: 173310, Ref: 1810684M92) $7.70

Hydraulic Pump Piston Ring - Hydraulic Pump Piston Ring is used with 1860038M1. Two are used per piston, 4 per Tractor. Sold individually. (Item #: 165929, Ref: 897493M1) $1.80

No
Picture
Hydraulic Pump Pressure Control Valve Spring - For Massey Ferguson tractor models 135, 150, 165, 165 (European), 175, 180, 1080, 1085, 1100, 1105, 1130, 1135, 1155, Replaces Massey Ferguson OEM number 1867478M1, 519313M2, (Item #: 173690) $1.00

Hydraulic Pump Rear Cam Block, Used - For Massey Ferguson tractor models F40, TO35, 30, 31, 35, 50, 65, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 205, 230, 235, 240, 245, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 565, 575, 590, 595, 675, 690, 698, 699, 1080, 1085, 2135, Compatible with Massey Ferguson Combine(s) 40, 550, 765, Compatible with Massey Ferguson Construction and industrial models 20, 30, 40, 202, 203, 204, 302, 304, 765, 2200, 2220, 3165, Replaces Massey Ferguson OEM number 894608M1, For a new version of this item use Item #: 113790, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460533) $13.26

No
Picture
Hydraulic Pump Rebuild Kit - For Massey Ferguson tractor models 30, 135, 148, 150, 165, 168, 175, 178 (UK), 180, 185, 188, 230, 240, 250, 265, 275, 285, 290, 298, 350, 355, 365, 375, 390, 398, 399, 690, 698, 699, 1080, All late production, Piston Bore: 0.985", Chamber Ports Measuring: (2) .385", (1) .510", (1) .328", Includes: (2) Valve Chambers, (1) Front Camblock, (1) Rear Camblock, (2) Hydraulic Pistons, (4) Piston Rings + other associated Seals, O-Rings and Gaskets, (Item #: 177040) $233.00

Hydraulic Pump Strainer Assembly - Verify measurements of 2 7/16 inch outside diameter, 1 5/8-7/16 inch inside diameter, 3 3/4 inch height. For tractor models 1080, 1085, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 20, 230, 231, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 35, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 393, 398, 399, 40, 50C, 550, 565, 575, 590, 595, 65, 670, 675, 690, 698, 698T, 699, 765. Hydraulic Pump Strainer also replaces 1687042M91, 1687042V91, 1810744M91, 1870199M92, 1687042M1. (Item #: 116132, Ref: 1687042M91) $10.60

Hydraulic Pump Support Peg - Hydraulic Support Peg has no shoulder on the pin. Verify type before ordering. If a stepped pin is needed, order part number 898643M1. This Pin use gasket 180904M1, sold separately. Replaces 180905M1 (Item #: 167221, Ref: 180905M1) $15.80

Hydraulic Pump Support Peg - This hydraulic pump support peg has a step (shoulder) on the pin. The diameter steps from 9/16 inches to 7/16 inches. If you need a straight pin peg, use part number 180905M1. If you need a gasket order part number 180904M1, sold separately. Replaces 898643M1. (Item #: 173297, Ref: 898643M1) $11.20

Hydraulic Pump Support Pin Gasket - This hydraulic pump support pin gasket is used with 180905M1 and 898643M1 hydraulic pump support pins. It replaces 180904M2, 180904M1. (Item #: 167222, Ref: 180904M1) $0.70

Hydraulic Stand Pipe O-Ring - This Hydraulic Stand Pipe O-Ring measures 3/8 inch inside diameter, 1/2 inch outside diameter, 1/16 width. Two are used per stand pipe. Replaces Massey Ferguson part number 195561M1 (Item #: 124228, Ref: 195561M1) $0.50

Hydraulic Stand Pipe Spiral Back Up Ring - This Hydraulic Stand Pipe Spiral Back Up Ring is used on many Massey Ferguson Models. Two are used per stand pipe. Sold individually. Replace part number 195874M1 (Item #: 124229, Ref: 195874M1) $1.80

No
Picture
Hydraulic Valve Kit - For Massey Ferguson tractor models 35, 50, 65, 135, 150, 165, 175, 178, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, (Item #: 176627) $356.00

Hydraulic Valve Kit, Remote Control - This 1 levered, Single Spool Valve includes hoses, quick couplers. The left lever shifts it from 3 point to remote. The right one is the remote operation. It is set up much like the original OEM valve from the 1960s. For tractor models TO35, 35, 135, 150, 175, 180, 1080, 230, 231, 235, 240, 245, 250, 253, 255, 265, 275, 282, 283, 285, 290, 360, 362, 375, 383, 390, 390T, 398, 399, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E. (Item #: 164384, Ref: S.65502) $527.00

Hydraulic pump valve chamber assembly - Hydraulic pump valve chamber assembly. Contains valves, springs, plugs, o-rings and snap rings installed. Tractors: MF135, MF150, MF165 using .98 inch diameter piston; MF175, MF180. Hole sizes: (B) no hole. (C) 33/64 inch, 13.1mm. (D) 3/8 inch, 9.5mm. For MF135, MF150, MF165, MF175, MF180. (Item #: 173193, Ref: 1868435M3VA) $45.60

Hydraulic valve - This is a Single Hydraulic Remote Valve. It bolts to the lift cover in place of 180908M1 cap. (Item #: 166954, Ref: 12012002) $253.00

Lift Arm - Left Hand Lift Arm. For tractor models 135, 150, 165, 175, 20, 203, 205, 235, 245, 255, 265, 275, 285, 30, 30B, 30D, 3165, 40, 40B. (Item #: 160184, Ref: 885446M1) $132.00

Lift Arm - This Lift Arm is 2.25 inches with 42 splines. It is 2.125 inches on both ends. For tractor models 135, 150, 165, 202, 204, 2135, 302, 304, 35, 50, 65, F40, TO35. Replaces 180970M2, 180 970M2, 180970M3, 353720X1, 365334X1, 376374X1, 70918887 (Item #: 168806, Ref: 180970M2) $83.00

Lift Clevis - This lift clevis, has on the inside of the yoke, a multi-level face. If you need a smooth face on the inside of the yoke, this is not the correct part and we do not have what you need available. For tractor models 135UK, 165, 180, 20, 203, 205, 20C, 2135, 2200, 230, 235, 245, 30, 302, 304, 31, 3165, 35, 40, 50, F40, MH50, TO35. Hydraulic Lift Clevis. (Item #: 173304, Ref: 180972M2) $29.40

Lift Clevis Bushing, LH - Left hand slotted bushing for rocker on draft control clevis. For 135, 150, 165, 165UK, 175, 175UK, 185UK, 180, 20, 200, 202, 203, 204, 205, 20C, 20D, 2135, 2200, 230, 235, 240, 240S, 245, 265S, 271, 281, 285S, 30, 302, 304, 31, 3165, 35, 40, 50, 65, FE35, MH50, TO35. (Item #: 153601, Ref: 180974M1) $6.60

Lift Cover - This lift cover is used on many Massey Ferguson Tractors. It uses a 3 1/8 inch Piston. It replaces those marked: 1861320M1, 1870951M2, 884615M1, 1870955M2, 1693551M1. Replaces 1693547M1, 1693547M91, 1693551M91, 3761903M91, 884612M92, 190861M2, 1870950M91. (Item #: 173139, Ref: 3761903M91) $573.00

Lift Cover Gasket - For tractor models 135, 135 UK, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 202, 203, 204, 205, 20C, 20E, 20F, 2135, 2200, (230, 245, 265, 275 serial number 9A349239), 235, 2500, 255, 256, 282, 30, 302, 304, 30B, 30H, 31, 3165, 35, 40, 40B, 4500, 50, 50A, 50C, 50F, 60, 65, 6500, 6500H, F40, FE35, TO35. (Item #: 112052, Ref: 886549M2) $1.70

Lift Cylinder - Cylinder, hydraulic lift for 3-1/8 inch diameter piston. For tractors: MF135, MF150, MF165, MF230, MF235, MF240, MF245, MF250, MF282 Industrials: 20, 20C, 20D, 30, 30E, 40 202, 203, 204, 205, 302, 304, 2135, 3165. Use with 1665737M91 piston with rings. Replaces 897560M1, 897560M2 (Item #: 163456, Ref: 897560M3) $131.00

Lift Cylinder - 3 inch Lift Cylinder for tractor models 135, 150, 165 with Pressure Control, 202, 203, 204, 205, 2135, 302, 304 (Late 35, 50, 65, FE35). This cylinder originally came with 1/2 inch studs and then later models used 9/16 inch studs. This part comes made for 1/2 in studs. Verify which you have. This will replace the 9/16 diameter studs if you purchase studs and bushings. We do not supply the studs or bushings. (Item #: 115418, Ref: 190859M1) $101.00

Lift Cylinder - For MF 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 290, Ind. 20, 20C, 30, 30B, 40, 40B, 50C. Lift cylinder for 3 3/8 inch piston. (Item #: 163480, Ref: 1671082M1) $112.00

Lift Cylinder Piston Ring, 3 Inch - Piston Ring for a 3 inch piston. For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. Three are typically used. Sold individually. Replaces 184447M1, 53202383, 830741M1 (Item #: 111673, Ref: 184447M1) $4.60

Lift Cylinder Piston with Rings - For tractor models 135, 150, 165, 230, 235, 240, 245, 250, 255, 265, 282, Ind: 20, 20C, 20D, 30, 30E, 40, 202, 203, 204, 205, 302, 304, 2135, 3165. Hydraulic Lift Cylinder Piston with Rings. 3 1/8 inch diameter. Replaces 897561M91. (Item #: 184692, Ref: 1665737M91) $46.70

Lift Cylinder Piston, 3 inch - Piston is 3 inch (piston ring is available separately, see part number 184447M1). For tractor models FE35, TO35 (serial number 179304 and above), 202, 203, 204, 205, 35, 35 Ind/Turf/Util, 50, 65, Early 135, 150, 165, 2135, 202, 204. (Item #: 112025, Ref: 184443M91) $37.00

Lift Handle Knob and Stud - Knob For tractor models 35, 135, 150, 165, 175, 180, 230, 231, 235, 240, 245, 250, 253, 255, 261, 270, 275, 282, 283, 285, 290, 298, 698, 699, 20, 20C, 20D, 20E, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50C, 50D, 50E, 2135, 3165. Replaces 1860403M1, 898201M1 (Item #: 163511, Ref: 1860403M1) $9.30

Lift Piston Rod - For tractor models 135, 150, 165, 202, 203, 204, 205, 2135, 302, 304, 35, 50, 65, FE135, FE35. Lift piston rod is 7 3/4 inches. (Item #: 170854, Ref: 191211M1) $19.70

Lift Pump - For tractor models 135, 150, 165, 175, 180, and (230, 245 fitted with MkII Pump). All late production models with late 21 spline camshaft in old MkII pump. Replaces 1684583M92, 1868965M92, 535087M91. (Item #: 170929, Ref: 535225M94) $450.00

Lift Pump - For tractor models 135, 150, 165, 175, 20C, 235, 245, 255, 265, 275, 30, 31, 40B, 50C, 50D, (30E, 50E, 178 ALL UK). 12 Spline Shaft. (Item #: 119896, Ref: 886821M94) $222.00

Lift Pump - For tractor models (135 UK serial number <116248 with multi-power transmission), 135, 150, 165, 180, Industrials 20, 30, 40, 3165. All with 10 spline camshaft. Replaces 1684582T, 1869615M91, 886331M92, 886682M97, 886683M92, 886684M97. (Item #: 112583, Ref: 1684582M92) $340.00

Lift Pump Adapter Plate - For 35, 150, 65, 135, 50, 235, 245, IND: 20, 20C, 30, 30B, 30D, 35, 40, 50, 202, 203, 204, 205, 2135, 2200. Front Mounted Hydraulic Pump Adapter Plate. 5 1/4 inch diameter with 3 bushings, mounting holes 3 3/8 inch on center, 3/4 inch left hand threaded center hole. (Item #: 118288, Ref: 704812M93) $62.00

Lift Pump Camshaft - For tractor models FE35, TO35, 135, 150, 165, 175, 202, 202, 204, 205, 302, 304, 3165, 35, 50, 65, 2135 TURF UTILITY NARROW. This camshaft has 10 spline and 1.3 Inch REAR SPLINE LENGTH. (Item #: 180715, Ref: 181993M91) $144.00

Lift Pump Cap Kit Bowl - For 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, FE135, FE35. Hydraulic Pump Cap Kit Bowl. Replaces 185839M1, 185555M1 (Item #: 178614, Ref: 185555M1) $12.10

Lift Pump Control Valve - Valve assembly, hydraulic pump control. For tractor models MF135, MF150, MF165, MF175, MF180. 8.5 inches long. Replaces 897507M92, 897507M1, 897507V92, 897507M94, 897507M93 (Item #: 170930, Ref: 897507M92) $26.60

Lift Pump Coupling - 10 spline coupling for models: 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 31, 3165, 35, 40, 50, 65, 85, 88, Super 90, F40, FE135, FE35, MH50, TO35. (Item #: 173680, Ref: 180926M1_) $58.00

Lift Pump Draft Control Spring Retainer Nut - For 1080, 1085, 135, 150, 165, 175, 180, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 240, 245, 250, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 304, 30B, 31, 165, 35, 360, 375, 383, 390T, 392, 393, 40, 40E, 50, 50D, 50E, 65, 670, 690, 698, F40, FE35, MH50, TO35. Replaces 180979M1, 180979M2 (Item #: 170928, Ref: 180979M2) $8.90

Lift Pump Filter - Filter element is top mount. 2-7/16 inch outside diameter, 1-29/32 inch inside diameter and 4 inches long. For tractors: MF35, MF50, MF65, MF85, MF88, MF90, MF1080 industrials: 202, 203, 204, 205, 302, 304, 2135, 2200, 3165. Also the following tractors with pumps having 10-spline camshaft: MF135, MF150, MF165, MF175, MF180 Industrials: 20, 30, 31, 40, 302, 304. For MF1100, MF1105, MF1130. Replaces 521451M1, 185551M92 (Item #: 172545, Ref: 521451M1) $11.00

Lift Pump Follower - For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 245, 250, 253, 255, 262, 265, 270, 275, 282, 283, 285, 290, 298, 30, 302, 304, 31, 3165, 35, 360, 375, 383, 390, 393, 398, 399, 40, 50, 65, 670, 690, 698, 699, F40, FE35, MH50, TO35. (Item #: 173508, Ref: 180933M1) $10.20

Lift Pump Needle Bearing - Bearing for recess in rear of camshaft for hydraulic lift pump. For tractors: TO35, MF35, MH50, MF50, MF65, MF135, MF150, MF165, MF175, MF180, MF230, MF231, MF235, MF240, MF245, MF250, MF253, MF255, MF265, MF270, MF275, MF282, MF283, MF285, MF290, MF298, MF360, MF375, MF383, MF390, MF390T, MF398, MF399, MF670, MF690, MF698, MF699, MF1080, MF1085 industrials: 20, 20C, 20D, 30, 30B, 30D, 30E, 31, 35, 40, 40B, 40E, 50C, 50D, 50E, 202, 203, 204, 205, 302, 304, 2135, 3165. (Item #: 184765, Ref: 1000251M1) $6.90

Lift Pump Overhaul Kit - For tractor models (135, 150, 165, 175, 178, 180, 20, 202, 203, 204, 205, 2200, 30, 302, 304, 3165, 40) FE135 Coventry, 2135 Turf Utility Narrow. Hydraulic Pump Overhaul Kit contains (2) A897491M1, (2) A-1860038M1, A-180924M2, A-180925M2, (4) A-897493M1, A-1810684M92, A-1810680M92, (2) A-1810678M91. 4 holes, 3/8 inch mounting bolt holes with .438 inch oil hole. (Item #: 173095, Ref: 556602) $221.00

Lift Pump Overhaul Kit - Repairs OEM pumps 1868435M3 or 888185M1. For tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 2040, 230, 240, 250, 265, 275, 285, 290, 298, 30, 350, 355, 365, 375, 390, 398, 399, 550, 565, 575, 590, 595, 675, 690, 698, 698T, 699. Hydraulic Pump Overhaul Kit contains (2) A-1868435M2, (2) A-1860038M1, A-180924M2, A180925M2, (4) A-897493M1, A-1810584M2, A-1810680M92. Valve Chambers have 4 holes, 3/8 inch mounting bolt holes with .524 oil hole. (Item #: 173258, Ref: 556603) $186.00

Lift Pump Overhaul Kit - Fits MF35, 65, 135, TO35, 150, 165, 175, 202, 2135, 302, 304, 50, 765. Repairs OEM Pump. Valve chamber has 5 holes on the sides of valve chambers. Hydraulic Pump Overhaul Kit contains (2) 184471M1, (2) 190799M1, 180924M2, 180925M2, (4) 8992604M1, 1810467M91, 556601 (Item #: 168716, Ref: S.40843) $226.21

Lift Pump Overhaul Kit - Fits Late MF135, 150, 165, 175, 178. Repairs OEM Pump. Chamber has 4 holes. Bottom hole = 7/16" (Item #: 185327, Ref: S.40844) $189.00

Lift Pump Piston - This Lift Pump Piston has a 0.980 Inch Piston. Uses 897493M1 rings, not included. For tractors: 135, 150, 165, 175, 180, 230, 235, 245, 1080, 1085, 255, 265, 275, 285, 231, 240, 250, 253, 360, 362, 20D, 30E, 40E, 270, 282, 283, 290, 298. Replaces 1860038H1, 1860038M91, 1860038V1, 3158071M1, 518476M1 (Item #: 173306, Ref: 1860038M1) $9.20

Lift Pump Plug - For tractor models 135, 135UK, 150, 165, 165UK, 175, 175UK, 178, 180, 20, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, 35, 40, 50, 65, TO35. Hudraulic Pump Plug. Used with 897491M1 Valve Chamber Assembly. (Item #: 180701, Ref: 181999M1) $6.20

No
Picture
Lift Pump Repair Kit - For MF 135, 150, 165 using .98 diameter piston; 175, 180. With valves, springs, plugs, o-rings and snap-rings installed. Hole sizes (B) no hole (C) 33/64 inch 13.1mm; (D) 3/8 inch 9.5mm. Hydraulic Pump Repair Kit contains valve chamber assemblies, pistons and piston rings. LESS Camshaft BLOCK. (Item #: HPOK2LCB) $179.99

Lift Pump Repair Kit - For 135, 150, 165 using .98 diameter piston; 175, 180. With valves, springs, plugs, o-rings and snap-rings installed. Hole sizes (B) no hole (C) 33/64 inch 13.1mm; (D) 3/8 inch 9.5mm. Hydraulic Pump Repair Kit contains valve chamber assemblies, pistons and piston rings. (Item #: HPOK2WCB) $214.63

Lift Pump VALVE CHAMBER Repair Kit - For tractors models TO35, MF35, MF50, MF65, MF135, MF150, MF165, MF175, MF180. Hydraulic Pump VALVE CHAMBER Repair Kit. Kit contains (4) 827718M1 rings, (1) o-ring kit, (4) 180928M1 springs, (4) 180930M1 outlet valves, (4) 180927M1 springs, (4) 180929M1 inlet valves. Contains valves, springs, snap rings and o-rings to repair all 4 chamber ports in one tractor. Services 180920M1 and 180921M1 body on early TO35. (Item #: 173170, Ref: 830997M1) $46.60

Lift Pump Valve Assembly - This Lift Pump Valve Assembly measures 7.5 inches in length and is for tractor models 1080, 135, 148, 150, 165, 168, 175, 178, 185, 188, 20C, 20D, 20E, 20F, 240P, 255, 265, 270, 275, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 350, 355, 360, 362, 365, 375, 383, 390, 390T, 392S, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 550, 565, 575, 590, 670, 675, 690, 698, 698T, 699. Valve is 7.5 inches long. (Item #: 165752, Ref: 1681789M91) $39.20

Lift Pump Valve Assembly. - For tractor models 135, 148, 150, 165, 168, 175, 178, 180, 185, 188, 202, 203, 204, 205, 2135, 2200, 30, 302, 304, 3165, (40, 50 ALL INDUSTRIAL MODELS). Replaces 1660209M92. (Item #: 179514, Ref: 1862486M96) $49.40

Lift Pump Vertical Relief Valve - This Lift Pump is the same as 1684582M92 except that it has a vertical relief valve. You need to ensure that the position of this valve will fit your tractor models (135 UK serial number <116248 with multi-power transmission), 135, 150, 165, 175, 178, 180, Industrials 20, 30, 40, 2135. All with 10 spline camshaft. Replaces 1684582M92, 194698M91, 519343M98. (Item #: 113267, Ref: 1684582M92VERT) $300.00

Lift Ram 2.50 Inch - Used with 897567M3 cross shaft, 2.50 inch on both ends, 54 splines. For tractor models FE135, 135, 150, 165, 20, 20C, 20D, 20E, 20F, 202, 203, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 265, 30, 30E, 302, 304, 3165, 40, 40E. (Item #: 167068, Ref: 886405M1) $74.00

Lift Response Plate - This Lift Response Plate is used on Massey Ferguson Tractors: 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1884877M93, 1872648M93 (Item #: 173307, Ref: 1872648M93) $52.00

Lift Shaft - For TO35, 35, 50, Early models of: 135, 150, 165, 35 Turf, 2135U, others with 37 tooth end splines. Replaces 184359M1 184359M2 (Item #: 160155, Ref: 184359M2) $83.01

Lift Shaft - 51 spline, 2 3/16 inch diameter. (1 hole in end). Replaces 897567M3, 897567V3. (Item #: 151049, Ref: 897567M3) $89.00

Lift Shaft Bushing - Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied. (Item #: 152601, Ref: 181018M1) $8.60

Overload Stop - For tractor models 1080, 1085, 135, 135UK, 150, 165, 165UK, 175, 175UK, 178UK, 180, 20, 202, 203, 204, 205, 20, 2200, 230, 235, 240, 245, 250, 253, 262, 263, 265, 270, 275, 275UK, 282, 283UK, 185, 290, 290UK, 292, 298, 30, 302, 304, 31, 3165, 35, 360, 362, 375, 383, 390, 390T, 393, 396, 398, 399, 40, 40E, 4225, 4235, 4240, 4243, 4245, 4253, 4255, 4260, 4263, 4265, 4270, 4325, 4335, 4345, 4355, 4360, 4370, 50, 65, 670, 690, 698, TO35. Overload Stop is round plate with single hole. (Item #: 172681, Ref: 180981M1) $5.70

$Massey Ferguson 150 Piston Ring, Hydraulic - 3 1\8, Pack of 3$
Piston Ring, Hydraulic - 3 1/8, Pack of 3 - For tractor models 135, 135 UK, 150, 165, 165 UK, 230, 231, 235, 245, (265 serial number up to 9A349239), 282, 20, 20C, 30, 40, 2135, 3165. (Item #: 176222, Ref: 897564M1) $8.70

Piston Rod, Hydraulic - 8.250 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 20C, 20D, 20F, 202, 203, 204, 205, 2200, 230, 231, 235, 245, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 302, 304, 31, 3165, 40, 40E, 50C, 50D, 50E, 690, 698, 699, FE135, 2135. (Item #: 173462, Ref: 886410M1) $28.00

Pressure Control Diaphram - Used on Mark III pumps, this diaphram has a 0.779 inch stud diameter. For tractor models 135, 150, 165, 175, 180, 20C, 230, 231, 235, 240P, 245, 255, 265, 282, 285, 298, 30, 30B, 31, 40, 40B, 50C, 698, 699. Replaces 1860114M91, 1860114V91 (Item #: 172378, Ref: 1860114M91) $13.60

Pressure Control Shaft - Used on some or the following Massey Ferguson Models: 135, 150, 165, 175, 230, 235, 240, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 392S, 393, 398, 399, 690, 20, 20F, 20C, 20D, 30, 30B, 30E, 40, 40B, 40E, 50C, 50D, 50E, this part measures 10 - 9/16 inches. Verify measurement before ordering as many of these models used more than one size. (Item #: 170902, Ref: 1870219M93) $18.10

Pressure Control Shaft Roller - This Pressure Control Shaft Roller measures 1/4 inch X 5/8 inch X 3/8 inch. It is used on some of the following Massey Ferguson 1080, 1085, 1200, 133, 135, 140, 148, 150, 152, 165, 168, 175, 178, 180, 185, 188, 20, 202, 204, 20B, 20C, 20D, 20E, 20F, 2135, 230, 231, 235, 240, 245, 250, 253, 255, 261, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 31, 3165, 340, 342, 35, 350, 352, 355, 360, 362, 365, 372, 375, 382, 383, 390, 390T, 393, 396, 398, 399, 40, 40B, 40E, 50, 50C, 50D, 50E, 50EX, 550, 565, 575, 590, 595, 670, 675, 690, 698, 698T, 699. Many of these models used more than one size roller. Verify measurements or OEM number before ordering. Replaces: 898196M2, 898196M1 (Item #: 179727, Ref: 898196M2) $3.90

Quadrant Support - This Quadrant Support is used on 135, 135UK below serial number 439191, 150, 165, 165UK below serial number 132849, 175, 175UK, 178, 230 with Lift Cover 884612M92, 235 with Lift Cover 1861320M1, 255 with Lift Cover 1861320M1, 285, up to aerial number 9A349239, Industrial 20 with Lift Cover 1861320M1, 20C with Lift Cover 884612M92, 30 except those with Lift Cover 1870955M1, 31, 40 except those with Lift Cover 1870955M1, 2135, 3165. Replaces ORM part numbers 1884238M1, 1884283M1, 898197M1, 908553M2 (Item #: 173709, Ref: 1884238M1) $35.40

Relief Valve - For tractor models TO35, 135, 150, 165, 175, 180, 235, 245, 255, 265, 2705, 2745, 35, 50, 66. (2750 psi) Replaces 884747M93, 884747M92, 884747M93, 883402M1, 40A63 (Item #: 163455, Ref: 883402M1) $18.50

Response Control Shaft - This Response Control Shaft is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 898208M2 (Item #: 179593, Ref: 898208M2) $24.00

Response Cover - This Response Cover is used on Massey Ferguson 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1668053M1 (Item #: 180324, Ref: 1668053M1) $16.50

Response Lever - This Response Lever is used on 135, 150, 165, 175, 230, 235, 245, 255, 265, 275, 20, 20F, 231, 240P, 253, 30E, 360, 362, 383, 392S, 40E, 50E. Replaces 1662278M2 (Item #: 180325, Ref: 1662278M2) $4.40

Selector Valve - Converts MF hydraulic to external service (valve has 3/8 inch BSP thread in pressure ports) This 3 way selecter valve is designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. Provides a positive change over from tractor hyd. to external service. Does away with need to fix the tractor lift arm in the lower position when external service is in use. The 3 point linkage of the tractor can be free for use while the external service remains connected simply by operating the valve. Services lift arms plus three external ports w/ return going back to rear end. Ports can only be used one at a time. Designed to fit in place of 180908M1 interface cover plate which is located on the hydraulic lift cover. This is a replacement for the earlier VFD1103 (Item #: 161563, Ref: VFD1104) $158.00

Stand Pipe, Hydraulic Oil Pressure - 12.500 inches long. For tractor models 1080, 1085, 135, 150, 165, 175, 180, 20, 202, 203, 204, 205, 20C, 2135, 2200, 230, 235, 245, 253, 255, 285, 30, 302, 304, 31, 3165, 360, 362, 375, 383, 390, 390T, 3925, 40, FE135 Coventry. (Item #: 124227, Ref: 898229M1) $21.60

Standpipe, Hydraulic - Used on models with pressure control, 12.5 inches long. For tractor models 150, 175, 180, 235, 245, 30, 31, (175, 178 serial number up to 709936), (135 serial number up to 79481), (165 serial number up to 520708), (185 serial number up to 320843). (Item #: 173347, Ref: 883788M91) $28.60

Standpipe, Hydraulic Oil Pressure - 9.75 inches long. For tractor models 135, 150, 175, 20, 20C, 20D, 20F, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 30, 30B, 30D, 30E, 360, 375, 383, 390, 390T, 393, 398, 399, 40, 40B, 40E, 50C, 50D, 50E, 670, 690, 698. (Item #: 155347, Ref: 1869119M1) $16.80

Valve Chamber - For tractor models 135, 150, 165, 175, 202, 2135, 302, 304, 35, 50, 65, 765, FE35, TO35. Hydraulic Valve Chamber has .914 inch bore. Chamber only, does not come with valves. (Item #: 112582, Ref: 184471M1) $37.15

Universal Parts and Accessories
Category: Hydraulic System

Clamp, Double Break-Away, Hydraulic - For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Item #: 112480, Ref: S42-4) $24.60

Coupler Flange - Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Item #: 108772, Ref: L36-6) $64.00

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Hydraulic Selector, isolator assembly - For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Item #: 185644, Ref: TS300) $140.00

Hydraulic Valve Kit, External, Single Spool - Converts tractor for operation of cylinders on pull type implements, front loaders, hydraulic motors, or other optional hydraulics. Single spool, double acting control valve mounts conveniently on flat or shell fenders. Selector/isolator allows operation of single or double acting cylinders. Mounting hardware and instructions included. Kit contains single spool, double acting control valve, isolator valve, valve couplers, clamp hoses, adaptors, hardware and instructions. For tractor models TO35 and later where 182373M1 lift cover plate is accessible. (Item #: 178324, Ref: TS3200M) $872.00

Hydraulic Valve Manifold - This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Item #: 173361, Ref: 19833A92) $1159.01

LBP Coupler Center - This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Item #: 178931, Ref: 192169) $75.00

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

No
Picture
Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Valve - Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Item #: 183771, Ref: TS200BA) $303.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All MF150 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy