Welcome! Please use the navigational links to explore our website.

Company Logo
Shopping Cart Icon
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Massey Ferguson 135 Parts

Category: Electrical System

[Categories]   [All MF135 Parts]   [All Massey Ferguson Models]  


Massey Ferguson 135 Alternator
Alternator
- For Perkins AG3-152 gas and A6-354 Diesel engines in tractors: MF135, MF150, MF1100, MF1130. Industrials: 20, 30, 40, 50. (Part No: ADR0231)
$116.00


NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

Massey Ferguson 135 Alternator
Alternator
- 12 volt, 55 amp. For tractor models (86 1967 to 1972), (205, 205SP 1966-1972 with Chrysler H-170), (300 1967-1977 with Chrysler H-225), (410 1966-1972 with Chevy 292 gas or Perkins 300 diesel), (510 1971-1977 with Chevy 350 gas), (510 1966-1970 with Chevy 327 gas), (1966-1977 with Perkins 354 diesel), (530 1978-1979 with 203 diesel), (540 1978-1979 with 318 diesel), (550 1978-1979 with 354 diesel), (135 1967-1968 with Z145 gas), (135 1969-1973 with 152 gas), (135 1967-1974 with 152 diesel), (135 Special 1967-1968 with Z134 gas), (150 1969-1973 with 152 gas), (150 1969-1975 with 152 diesel), (165 1967-1975 with 203 diesel), (1100 1964-1972 with 354 diesel), (11330 1964-1973 with 354 diesel), (1150 1970-1972 with 510 diesel), (1500 1970-1974 with Cat. 573 diesel), (1800 1970-1973 with Cat. 3160 diesel), (36 1970-1972 with Chrysler 225 gas), (36 1967-1970 with Chevy L4-153). Replaces 1100788, 1100779, 1100820, 1100828, 1100772, 1100805, 1100883. (Part No: ADR0231)
$116.00

Massey Ferguson 135 Alternator with Tach Drive
Alternator with Tach Drive
- This is a 12 volt 63 amp alternator. It is internally regulated and comes with fan and pulley. This alternator can be used to replace original generator. Additional brackets and hardware may be needed. Tach drive is appropriate for gas tractors where the tach drive is on the generator. Use part number ADR9209 to make this a single wire self exciting alternator (not included). (Part No: ADR0382)
$118.73

Massey Ferguson 135 Alternator, Support Bracket, Front
Alternator, Support Bracket, Front
- For tractor models 135, 20, 20C, 230, 235, 245, 30B, 30D. Perkins Gas or Diesel. (Part No: 518503M1)
$42.50

Massey Ferguson 135 Alternator, Support Bracket, Rear
Alternator, Support Bracket, Rear
- For tractor models 135, 20. Perkins Gas or Diesel (Part No: 518504M1)
$29.50

Massey Ferguson 135 Alternator, Tension Strap
Alternator, Tension Strap
- For tractor models 135, 20, 20C, 230, 235, 245, 30B, 30D. Perkins Gas or Diesel. (Part No: 511373M3)
$21.76

Massey Ferguson 135 Coil, 12V
Coil, 12V
- This 12 Volt Coil with internal resistor comes with bracket for Delco distributor with screw held cap. For tractor models 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50. (Part No: 189673M1)
$16.05

Massey Ferguson 135 Distributor
Distributor
- A complete distributor that comes with cap, points, rotor and condenser. It has a 9 tooth shaft gear. For tractor models TO20, TE20 with Continental Engine, TO30, TO35, 35 (to serial number 245932), F40, 50 to serial number 536248. (Serviceable for: 135, 202, 204, 2135, 2200 (early with 1112643 distributor and Z134 engine). Replaces 1111722, 1111740, 1112557, 1112570, 1112586, 181544M91, 181685M91, 181686M91, 182852M91, 829856M9. (Part No: 182852M91-TP)
$135.00

Massey Ferguson 135 Distributor Cap 4 Cylinder
Distributor Cap 4 Cylinder
- For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, IND 202, 204, 302, 304, 356. This is a Delco style screw on cap. (Part No: 1024914M91)
$9.06

Massey Ferguson 135 Distributor Cap 6 Cylinder
Distributor Cap 6 Cylinder
- Distributor CAP For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50 (Part No: 1960810)
$9.20

Massey Ferguson 135 Distributor Cap, 3 Cylinder
Distributor Cap, 3 Cylinder
- For 3-cylinder 152 GAS Perkins engine used on: 20, 40, 135, 150, 2200, 2500. (Part No: 1035263M1)
$18.50

Massey Ferguson 135 Distributor Dust Cap
Distributor Dust Cap
- Used on Delco distributors with Screw Held caps, this dust cover replaces OEM numbers 1024915M1, 156359A, 1960325, 702539, 74056699, R11264. 3.300 inches outside diameter, 1.047 inches tall, 0.210 inch screw holes. (Part No: 1960325)
$19.26

Massey Ferguson 135 Distributor Rotor
Distributor Rotor
- Used on Delco Distributors with screw held caps, 1964 and later. It replaces Delco number 1954566. Replaces OEM numbers R11260, 10P3024, 1024916M1, 1954566, 74056700, AV101412, GW1954566, 21A310, 111190, 1400-5049. (Part No: 1954566)
$3.00

Massey Ferguson 135 Electronic Ignition Conversion Kit -12V Negative Ground
Electronic Ignition Conversion Kit -12V Negative Ground
- For 35, F40, 50 all with Cont Z134 engine & Delco (D)1112643 dist, MF65 with Cont G176 engine & D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 & D1112644 dist, 165 with Cont G176 engine & D1112644 dist, 165 with Perkins AG4-212 with D1112458 dist, 175/180 with Cont G206 engine with D1112647 dist, 175/180/185 with Perkins AG4-236 engine with D1112693 dist, MF255 with Perkins AG4-212 engine & D1112458 dist, MF265/MF285 with Perkins AF4-236 engine & D112693 dist. Also works with H-260 Continental Engine.Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use on 12 volt neg grnd system only. Never change points again. Easy to install. Increase spark plug life and horsepower. Improve fuel economy. (Part No: 1145A)
$107.50

Massey Ferguson 135 Electronic Ignition Conversion Kit, 12 volt negative ground
Electronic Ignition Conversion Kit, 12 volt negative ground
- For 135, 235 and 150 with Perkins AG3-152 using Delco 1112457 distributor. Electronic ignition conversion kit. Replaces points and condenser with an electronic module. For use with 12 volt negative ground system. (Part No: 1131)
$205.00

Massey Ferguson 135 Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
Electronic Ignition Conversion Kit, High Perfomance, 12 Volt Negative Ground
- The Ignitor II has many of the same great features that the Ignitor has, but its smarter. It senses the coil current level and use a powerful micro controller to adjust variable dwell which helps to maintain peak energy throughout the entire RPM range. Senses startup and develops more energy for quicker, easier starting. Current protection shuts down the system, preventing component damage. NOTE: Ignitor II applications can not be used with solid core ignition wires, can be used with our ignition wires p/n CPN12259EI. Replaces points and condenser with an electronic module. Use with 12 volt negative ground systems. For tractor models 35, F40, 50 all with Cont Z134 engine & Delco (D)1112643 dist, MF65 with Cont G176 engine & D1112644 dist, 135 Spec with Cont Z145 with D1112643 dist, 135/150 with Cont Z145 & D1112644 dist. (Part No: 91145A)
$207.00

Massey Ferguson 135 Fuse Holder
Fuse Holder
- Mounts in 5/8 inch diameter hole. 2 spade connectors. Replaces: 186216M91, 186216M91, 506063M91, 522462M91 (Part No: 376852R91)
$7.76

Massey Ferguson 135 Generator
Generator
- 12 volt, 25 amp, does not have tach drive. For tractor models (135 1963-66 with Z145 gas and Lucas electronic), (135 1964-66 with 152 dsl), (165 1968-71 with 176 gas), (175 1964-66 with 206 gas or 236 dsl). Replaces Lucas 22704. (Part No: GLU0002)
$149.00

Massey Ferguson 135 Ignition Switch
Ignition Switch
- This ignition & starter switch with keys, has 3 terminals. For gas tractors: 50, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 1100, 1130, 1500, 1800 industrials: 20, 20C, 30, 30B, 40, 2135, 2200, 3165 combine: 410 skid steer loader: 811. For 1100, 1130, 135, 1500, 150, 165, 175, 1800, 180, 20C, 20, 2135, 2200, 230, 235, 245, 255, 265, 30B, 30, 3165, 40, 410, 50, 811. Replaces 194747M91, 194747V91, 194747M1, PASC780 (Part No: 194747M91)
$24.50

Massey Ferguson 135 Neutral Safety Switch
Neutral Safety Switch
- This Neutral Safety Switch is for bullet type terminal. Replaces 181140V94, 53208520, 181140M1, 181140M91, 181140M94, 181140M93, 181140M92. (Part No: 181140M94)
$14.26

Massey Ferguson 135 Neutral Safety Switch Boot
Neutral Safety Switch Boot
- For tractor models: 35, 40, 50, 65, 85, 175, 180, 230, 235, 245, 255, 265, 275, 285, 20, 20c, 30, 30B, 30D, 31, 40, 40B, 50, 50A, 50C, 50D, 60, 2135, 3165, 22, 2500, 4500, 6500, 88, 135, 150, 165, Super 90, 202, 203, 204, 205, 302, 304. (Part No: 180776M1)
$15.50

Massey Ferguson 135 Spark Plug
Spark Plug
- Autolite Spark Plug 18MM Thread Diameter fits Continental Gas Engines in: TO20, TO30, TO35, 50, 65, 85, 88, S90, 135, 150, 165, 175, 180, 1100, 230, 235. Gas Industrials: MF35 Utility and turf, 202, 204, 302, 304. Massey Harris: Pony, 21, 22, 23, 30, 33, 44, 44-6, 44 Special, 101Jr. 333, 444, 555, 303, 402, 404. . If you order 1, you will only receive 1 spark. You need to order 4 to receive 4. Replaces Autolite AL386, AL388, AL3116 and Champion D10, D14, D16, RD16, D21, D23 plugs. (Part No: AL386)
$3.06

Massey Ferguson 135 Spark Plug Wire Set, 3-Cylinder Perkins
Spark Plug Wire Set, 3-Cylinder Perkins
- Custom wire set fits GAS Perkins engines in TRACTORS: 135, 150. INDUSTRIALS: 20, 40 . FORKLIFT: 2500. Wire lengths are 13, 13, 10, and 8 inch coil wire. (Part No: S.42780)
$26.26

Massey Ferguson 135 Spark Plug Wire Set, Custom
Spark Plug Wire Set, Custom
- No cutting or fitting required for these wires. These are custom made for the following 4-cylinder Continental Gas engines using Delco Distributors: Z120, Z129, Z134, and Z145. Used on tractors: TE20, TO20, TO30, F40, 135, 135 Deluxe, 150, 35, 50, MH50, TO35. Also used on INDUSTRIALS: 202, 204. (Part No: S.42779)
$26.26


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

Massey Ferguson 135 Starter
Starter
- This Lucas style starter is for 12 volt, 10 tooth, clockwise rotation. 3-bolt mount, Diesel engines. For tractor models (205, 250SP 1966 to 1972 with Chrysler H-170), (FE65 1956 to 1962 diesel), (20, 40 1970 to 1971), (35 1960 to 1968), (65 1959 to 1964), (135 1964 to 1973 with Perkins 152 diesel), (148 1964 to 1972 with Perkins 152 diesel), (154 1986 to 1989), (154 1980 to 1981 with Perkins 152 diesel), (165 1964 to 1969 with Perkins 203 diesel), (184 1980 to 1985 with Perkins 236 diesel), (263T from 1993 up), (364 1989 to 1993 with Perkins 152 diesel), (2135 1964 to 1968), (702 1959 to 1962). Replaces; Delco: 1107870, 1107512, 12301330, 1107853, 1107860, Dixie: TS-1036, 260-62143, Massey Ferguson: 191091M92, 515913M93, 579934M91, 513913M92, 1900434M91, 191081M93, 1403617M91, 515913M92, 189117M91, 1903617M91, 513913M91 1107503. There is an additional shipping cost for this product of $7.50 (Part No: SLU0008)
$216.00

Massey Ferguson 135 Starter
Starter
- This is an Off Set Gear Reduction replacement for 515913M91. It is used on 135, 150, 165, 235, 30, 302, 304, 3165, 35, 356, 40. All with diesel engines. Replace 535388M92, TS-1036, 1107503, 1107512, 1107860, 1107870, 191081M92, 191081M93, 515913M91, 515913M92, 579934M91, 579935M91, 72072956, 773363M91, AM1107860, S14192, 1108662, 1109264, 1200-0113, 1200-3119, 12301330, 1403617M91, 189117M91, 1900434M91, 1903617M91, 191091M92, 1998345, 1998377, 2072956, 323-673, 323-700, 323673, 323700, 515913M93, 1868283M5 (Part No: 181965)
$285.00

Massey Ferguson 135 Starter
Starter
- This New Starter is used on Massey Ferguson with Perkins Gas with replacing Delco 1108379, 1108397, 1109082. This is a 12 Volt Starter, 10 Teeth, Clockwise rotation, Direct Drive Delco 10MT Type. Replaces 410-12298N, 410-12298R, SDR0269, 1108379, 1108397, 1109082, 323-650, 3511, 1903107M91, 518671M91, 579837M91. (Part No: 518671M91)
$330.00

Massey Ferguson 135 Starter
Starter
- This is a Cold Climate starter if replacing a 968856M1 or 1680065M1. Right hand mount. For MF 35, 65, 135, 145, 155, 165, 230, 235, 240, 245, 250, 253, 254, 255, 350, 360, Ind 20D, 20E, 20F, 30E, 30H, 40E, 50. Starter, Lucas type used with Perkins A3.152, AD3.152, A4.203 $ AD4.203. (Part No: S.41137)
$285.00

Massey Ferguson 135 Starter Assembly, New
Starter Assembly, New
- 12 volt, diesel, 10 teeth, 2.7KW. For tractor models MF30, MF50, MF165, MF174, MF174C, MF194, MF265, MF270 MF275, MF285, MF290, 6500, 7500, 8500. Replaces Lucas, 26413, 27411, 27433, 27539, 26410 LRS190R, 26412, 26412R, LRS190, 27432, 26264, 26154, 26264R. 1680065R3, 1680065M3, 1680065M1, 26264R, 26412R, 27432R, 3.93E+07, 26412, 26220, 3597371M2, 3597426M3, 3597426M2, 968856M1, LRS190R, 3930505R1, 1868285M3. Left side mount. (Part No: 157974)
$189.00

Massey Ferguson 135 Starter Drive
Starter Drive
- Drive assembly. For Continental Z145 in tractors: 135, 150, 165, 175, 178, 180, 20 Indust/Const, 202 Indust/Const, 205, 20C Indust/Const, 2135 Indust/Const, 2200 Forklift, 2200 Gas, 230, 235 Indust/Const, 235 Orchard, 245, 245 Orchard, 2500 Forklift, 302 Indust/Const, 304 Indust/Const, 30B Indust/Const, 3165 Indust/Const, 35, 356 Indust/Const, 40, 4500 Forklift, 50 Indust/Const, 65 . Replaces Delco 1963808. 9 tooth, Clockwise Rotation, for Delco 10MT. Services starter 1108324. (Part No: 1025380M91)
$25.26

Massey Ferguson 135 Starter Drive
Starter Drive
- Starter drives. Drive assembly. For tractor models 830, 1020, 1520, 1530, 2020, 2030, 2040, 2440, 2510, 2520, 2630 and 2640 tractors~ 6000 Hi-Cycle Sprayer Tractor~ 45, 55, 95, 4400, 4420 combine~ 9900 and 9910 Cotton Pickers~ 2250, 2270 and 2420 Windrowers~. (Part No: TP-AR54923)
$18.76

Massey Ferguson 135 Starter Drive
Starter Drive
- For tractor models Super 90, 1100, 1130, 135, 150, 165, 175, 180, 230, 235, 245, 255, 265, 275, 285, 50, 85, 88, TO35 GAS OR DIESEL, 750 serial number 1696157>, (850, 860 ALL WITH DELCO STARTER 1113676), (203, 205, 410, 510, 540, 550, 760 ALL WITH PERKINS ENGINES). Starter drive used with starters 1113402, 1113672, 1113391. Replaces 1755245M1. (Part No: 1755245M1)
$24.26

Massey Ferguson 135 Starter Solenoid
Starter Solenoid
- Solenoid Assembly, flange mounting to starter. Replaces Delco 1114356 on starters 1108649, 1107503, 1107512, 1108649. Gas and diesel applications. 12-volt. Replaces 1025381M91, 1047083M91, 1755027M91. (Part No: 1047083M91)
$15.50

Massey Ferguson 135 Starter Switch
Starter Switch
- For tractor models Super 90, 135, 165, 50, 65), 35 Gas and Perkins Diesel, TO35 Gas and Standard Diesel. Starter Switch. 4 prong. Includes 2 keys. This is a three position switch, heat, operate, start. - LUCAS Equipment. Replaces 35630, 883920M1, 967570M4, 504809M91, 963416M1, 883928M1, 883928M91, 417402M1, 2846124 (Part No: 883928M1)
$11.80

Massey Ferguson 135 Starter Switch
Starter Switch
- For tractor models 1080, 1100, 1105, 1130, 1135, 1150, 1155, 135, 150, 165, 175, 180, 2135, 230, 235, 245, 255, 265, 275, 285, 50, all with Perkins Diesel Engines. Starter Switch. 2 Prong. Includes 2 keys. (Part No: 504809M1)
$23.00

Massey Ferguson 135 Switch, Lamp & Horn
Switch, Lamp & Horn
- Lucas type. Used on 135, 148, 165, 168, 175, 178, 185, 188, 230, 235, 240, 245, 250, 255, 265, 275, 290, 298, 35, 35 Gas / 35 Petrol, 35X, 375E Brazilian, 390E Brazilian, 50, 50E, 50EX, 565, 575, 590, 65, 765. Replaces 882283M1, 54033364, 34952 (Part No: 1502378C1)
$17.76

Massey Ferguson 135 Tune Up Kit
Tune Up Kit
- This Tune Up Kit is used on Perkins 3 Cylinder Gas Tractors. Kit contains points, rotor, cap, custom length spark plug wire, and 3 Autolite 295 (3/8 inch reach, 13/16 hex) spark plugs. VERIFY PLUG NUMBER OR SIZE - THERE IS MORE THAN ONE OPTION FOR THESE MODELS. (Part No: S44011)
$65.00

No
Picture
Tune Up Kit, 3/4 Inch Reach Plugs
- For Perkins engine 3 cylinder Models: MF135, MF150, 20, 40, 2200, 2500. Comes with points, condenser, rotor and 3 spark plugs. Verify correct spark plug size and type (Part No: S.60965)
$21.96

No
Picture
Tune Up Kit, 7/16 Inch Reach Plugs
- For 3 cylinder Models: MF135, MF150, 20, 40, 2200, 2500. Contains points, condenser, rotor and 3 spark plugs. Verify correct spark plug size and type (Part No: S.61174)
$16.08

Massey Ferguson 135 Tune Up Kit, Basic
Tune Up Kit, Basic
- FOR DELCO DISTRIBUTORS WITH SCREW-HELD CAP. Ignition KIT with ROTOR For 202, 204, 302, 304, 356, MF1100, MF135, MF150, MF165, MF175, MF180, MF35, MF50, MF65. (Part No: ATK10DSR)
$10.40

Massey Ferguson 135 Tune Up Kit, With Plugs
Tune Up Kit, With Plugs
- This 4 cylinder Tune Kit is for Delco Distributors with screw type cap. VERIFY SPARK PLUG SIZE as this kit comes with AL386 that are 18MM, 1/2 inch reach and 7/8 hex size. For tractor models 35, 50, 65, 135, 150, 165, 175, 180, 1100, MH50, 202, 204, 302, 304, 356. Includes plugs, points, condenser and rotor. Verify correct spark plug size and type (Part No: MF-ITK-40)
$21.76

Massey Ferguson 135 Voltage Regulator
Voltage Regulator
- Voltage regulator, 12-volt. For MF tractors using Delco alternators Following Delco Alternators: 1100553, 1100557, 1100558, 1100566, 1100567, 1100568, 1100569, 1100570, 1100572, 1100590, 1100591, 1100662, 1100742, 1100750, 1100751, 1100778, 1100780, 1100787, 1100790, 1100791, 1100796, 1100797, 1100804, 1100810, 1100816, 1100817, 1100818, 1100834, 1100836, 1100837, 1100838, 1100839, 1100842, 1100843, 1100845, 1100846, 1100847, 1100849, 1100851, 1100856, 1100860, 1100870, 1100871, 1100875, 1100879, 1100883, 1100885, 1100886, 1100888, 1100889, 1100891, 1100892, 1100893, 1100895, 1100896, 1100905, 1100907, 1100908, 1100910, 1100916, 1100917, 1100921, 1100931, 1100932, 1100933, 1100939, 1100943, 1100944, 1100951, 1102943, 1102944, 1102945, 1119507. Replaces 1119507 1031060M1, 1031060M92, 1031060V92, 1031060M91, 1071060M91, 182548M1, 1903077M91, 508522M91 (Part No: 1031060M91)
$18.00

Massey Ferguson 135 Voltage Regulator
Voltage Regulator
- Fits TO35, MF25, F40, MF35, MF50, MF65, MF85, MF88, MF Super 90, MF135, MF150, MF165, MF175, MF180, MF202, MF204, MF203, MF205, MF2135, MF3165. Combines SP300, SP410, SP510. 12 Volt models with generators. The Three Post side of this regulator may be parallel or slightly splayed. (Part No: 182548M92)
$20.00

Massey Ferguson 135 Wiring Harness
Wiring Harness
- This Wiring Harness is used on Massey Ferguson 135 tractors, built in the UK with A3.152 Perkins Diesel Engine and Lucas electrical with a generator. Replaces 898426M1, 898426M93 (Part No: 898426M93)
$67.00



Massey Ferguson 135 Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Part No: 2348258)
$43.50

Massey Ferguson 135 Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$14.00

Massey Ferguson 135 Alternator Pulley
Alternator Pulley
- Pulley, 3-1/8 inch diameter, 5/8 inch shaft bore, 2 grooves for 1/2 inch wide V-belt. (Part No: AP3158)
$71.00

Massey Ferguson 135 Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$27.00

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$88.00

Massey Ferguson 135 Battery Hold Down
Battery Hold Down
- For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.00

Massey Ferguson 135 Battery Hold Down J-Bolts, Pair
Battery Hold Down J-Bolts, Pair
- This Pair of Battery Hold Down Bolts each measure 10.5 inches long. Price is for a pair. For tractor models 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568. Replaces 98185A1. Also Universal for many other Battery Hold Down Brackets. (Part No: 393161R1)
$9.66

Massey Ferguson 135 Battery Joining Cable
Battery Joining Cable
- This cable is 2 gauge measuring 10 inches. (Part No: B204)
$18.75

Massey Ferguson 135 Battery Joining Cable
Battery Joining Cable
- This cable is 2 gauge measuring 18 inches. (Part No: B207)
$21.00

Massey Ferguson 135 Battery Joining Cable
Battery Joining Cable
- The cable is 2/0 gauge measuring 18 inches. (Part No: B1937)
$36.00

Massey Ferguson 135 Battery Joining cable
Battery Joining cable
- The cable is 2/0 gauge measuring 12 inches (Part No: B1936)
$29.90

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

Massey Ferguson 135 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 12 inches. (Part No: B1931)
$25.26

Massey Ferguson 135 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 18 inches. (Part No: B1932)
$25.50

Massey Ferguson 135 Battery to Starter Cable
Battery to Starter Cable
- This cable is 2/0 gauge measuring 48 inches. (Part No: B1935)
$32.26

Massey Ferguson 135 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 8 inches. (Part No: B188)
$17.50

Massey Ferguson 135 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 12 inches. (Part No: B189)
$15.76

Massey Ferguson 135 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 18 inches. (Part No: B190)
$15.50

Massey Ferguson 135 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 36 inches. (Part No: B192)
$19.00

Massey Ferguson 135 Cable, Battery to Starter
Cable, Battery to Starter
- This cable is 2 gauge measuring 48 inches. (Part No: B227)
$26.26

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$51.00

Massey Ferguson 135 Coil Bracket
Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$6.96

Massey Ferguson 135 Coil, 12 Volt with Resistance
Coil, 12 Volt with Resistance
- This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Part No: 189673M1)
$16.05

Massey Ferguson 135 Coil, High Performance (Black), 12 Volt, Epoxy Filled
Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$61.00

Massey Ferguson 135 Coil, High Performance (Black), 12 Volt, Oil Filled
Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$61.00

Massey Ferguson 135 Coil, High Performance (Black), 6 Volt, Epoxy Filled
Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$78.00

Massey Ferguson 135 Coil, High Performance (Black), 6 Volt, Oil Filled
Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$48.76

Massey Ferguson 135 Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Part No: 40601)
$50.00

Massey Ferguson 135 Coil, High Performance (Chrome), 12 Volt, Oil Filled
Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$81.00

Massey Ferguson 135 Coil, High Performance (Chrome), 6 Volt, Oil Filled
Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Part No: 40001)
$63.00

Massey Ferguson 135 Coil, Ultra High Performance (Black), Epoxy Filled
Coil, Ultra High Performance (Black), Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45111)
$63.00

Massey Ferguson 135 Coil, Ultra High Performance (Black), Oil Filled
Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using Ignitor II electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. 0.600 ohms resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45011)
$52.00

Massey Ferguson 135 Coil, Ultra High Performance (Chrome), Oil Filled
Coil, Ultra High Performance (Chrome), Oil Filled
- Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. This coil is used with Ignitor II electronic ignitions, not Ignitor I. Unless otherwise specified on our web page, electronic ignitions are Ignitor I. (Part No: 45001)
$73.00

No
Picture
Distributor Terminal Insulator Assembly, Delco
- Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Part No: 1904376)
$19.00

Massey Ferguson 135 Generator Cutout
Generator Cutout
- Generator cutout for Autolite, 6-volt. For most MH models to 1951. (Part No: CB4014)
$18.10

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.50

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.50

Massey Ferguson 135 Spark Plug
Spark Plug
- Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$8.36

Massey Ferguson 135 Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$3.16

Massey Ferguson 135 Spark Plug Wire Set, 4 Cylinder, Univeral
Spark Plug Wire Set, 4 Cylinder, Univeral
- Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$18.60

Massey Ferguson 135 Spark Plug Wire Set, 4 Cylinder, Universal
Spark Plug Wire Set, 4 Cylinder, Universal
- For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. Made with carbon impregnated core to suppress radio static and designed to handle the high voltage of electronic ignition systems. (Part No: CPN12259EI)
$18.76

Massey Ferguson 135 Spark Plug Wire Set, Universal - 6 Cyl.
Spark Plug Wire Set, Universal - 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (“Mag Wire”) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Part No: S66465)
$21.20

Massey Ferguson 135 Spark Plug Wire Set, Universal 6 Cylinder
Spark Plug Wire Set, Universal 6 Cylinder
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$22.00

Massey Ferguson 135 Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$18.00

Massey Ferguson 135 Starter Armature
Starter Armature
- Body OD: 2.921 inches, Communicator end OD: 0.563 inches, Drive End OD: 0.563 inches, Length: 12.728 inches, Communicating End to Bearing/Bushing Stop: 0.823 inches, Drive End to Bearing/Bushing Stop: 7.236 inches, Number of Comm. Bars: 23, Lam Stack Thickness: 2.685 inches, Set Screw and Keyway on Drive End. Replaces 1871662, 1878077, 1910938, 1B7705, 813555, 816163, 818002, D4100. Can fit several applications please verify OEM part before ordering. (Part No: 1871662)
$79.00

Massey Ferguson 135 Starter Drive
Starter Drive
- Drive assembly for Delco starters. Fits all MF diesel models Perkins gas models. (Part No: 1036519M91)
$24.26

Massey Ferguson 135 Starter Solenoid
Starter Solenoid
- Solenoid assembly, saddle mounting to starter. Services most late models, replaces Delco 1115510, on starters 1113139, 1113683, 1113676, others. 12-volt. (Part No: 1115510)
$24.26

Massey Ferguson 135 Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$17.00

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 18 inches. (Part No: B194)
$12.76

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 24 inches. (Part No: B195)
$15.80

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2 gauge measuring 36 inches. (Part No: B196)
$21.00

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 18 inches. (Part No: B1938)
$29.26

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 24 inches. (Part No: B1939)
$31.50

Massey Ferguson 135 Switch to Starter Cable
Switch to Starter Cable
- This cable is 2/0 gauge measuring 36 inches. (Part No: B1940)
$42.76

Massey Ferguson 135 Switch, Push Button
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Part No: R7994)
$14.50

No
Picture
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$17.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories]   [All MF135 Parts]   [All Massey Ferguson Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2022 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy