FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Massey Ferguson 40 Parts

Category: Steering

[Categories] [All MF40 Parts] [All Massey Ferguson Models]

Bearing, Thrust Spindle - Bearing, Thrust Spindle. 1 1/2 Inch Inside Diameter, 2 19/32 Outside Diameter, 5/8 inch Wide. Replaces 1860036M3, 1868732M1, 196167M1, 3611413M1, 3599263M1 (Item #: 102474, Ref: 196167M1) $10.80

Castle Nut - Used as a steering arm nut and a spindle nut in different applications. It is 1 1/4 inch UNF thread. Replaces OEM part numbers: 353931X1, 882263M1, 882263V1, 882263M91 (Item #: 168996, Ref: 353931X1) $5.40

Differential Ring Gear Case Assembly - For Massey Ferguson tractor models 30, 31, 40, 50, 50A, 65, 135, 150, 175, 180, 205, 220, 235, 240, 245, 250, 255, 261, 265, 270, 275, 282, 283, 285 (s/n 9A349239-later), 290, 298, 360, 375, 390, 390T, 399, 670, 690, 698, 699, 1085, Replaces Massey Ferguson OEM number 882783M92, (Item #: 165984) $175.00

Front Axle Pivot Support - Replaces casting number 186069M1. For tractor models 150, 165, 302, 304, 356, 40, 50, 65. (Item #: 126511, Ref: 506913M91) $114.00

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Power Steering Pump - Straight cut gear, 13 teeth, includes drive gear, reservoir and adjustable relief valve preset at 1500 PSI. BARNES style pump, hose fittings on gear side of pump. Does not come with mounting gasket. We do not have a gasket available. For tractors using Perkins 3 Cylinder Gas or Diesel Engines. Models: 35, 50, 135, 150, M230, MF235, MF245, MF250, 135, 230, 231, 240, 245, 250, 2500, 253, 35, 4500, 50; Industrials: 20, 20C, 30B, 30D, 30E, 40, 203, 205, 2135, 2200; Forklifts: 2500, 4500. Replaces Massey Ferguson 193208M91, 518369M92, 527904M91, 773126M92, 527904M93, 527904M92, 773126V92. Replaces J.S. Barnes: 1000013, GC-5060-A-GA-7, GC-5060-A-GA-5, GC-5060-A-GA-2 NOTE: This pump is 4.00 inches deep. If you need a shallower pump order 527904M91 (Item #: 119845, Ref: 773126M92) $160.00

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $510.00

Power Steering Valve Kit - For tractor models 135, 148, 240, 40. (Item #: 173124, Ref: 894969M92) $15.80

Power steering pump repair kit - For EARLY Models: 135, 148, 40, 550, 240. Verify OEM part number. (Item #: 173654, Ref: 1810529M91) $20.48

Seal, Power Steering Pump Driveshaft - For tractor models 135, 20, 200, 20C, 20D, 20E, 2135, 2200, 230, 235, 240, 245, 250, 2500, 30B, 30D, 30E, 35, 40, 4500, 50, MH50, 65, TO30. Verify measurements of 1.002 inches outside diameter, .437 inches inside diameter and .375 inches in width. (Item #: 173648, Ref: 1751651M1) $6.40

Spindle Bushing - 1.443 inch outside diameter, 1.238 inch inside diameter, 1.5 inches long. For tractor models 130, 150, 165, 40, 50, 65, 765, F40. (Item #: 102477, Ref: 196060M1) $8.60

Spindle Bushing - 1.680 inch outside diameter, 1.50 inch inside diameter, 1.50 inches long. For tractor models 1080, 1085, 135, 165, 168, 175, 180, 185, 188, 20, 202, 203, 204, 205, 20C, 20D, 20F, 2135, 2200, 230, 231, 235, 240, 240P, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 30, 302, 304, 30B, 30D, 30E, 3165, 360, 362, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 85, 88, 90. (Item #: 102482, Ref: 183086M1) $6.10

$Massey Ferguson 40 Spindle Bushing\Bearing\Seal Kit$
Spindle Bushing/Bearing/Seal Kit - Kit includes (2) 196167M1 thrust bearings, (4) 183086M1 bushings, and (2) seals. For tractor models 135, 165, 168, 178, 185, 188, 20C, 20D, 20F, 202, 204, 205, 2135, 2200, 230, 231, 235, 240, 245, 250, 255, 265, 270, 275, 282, 285, 30, 30B, 30D, 30E, 30H, 3165, 356, 392S, 40, 40B, 40E, 4500, 575, 590, 670, 675, 690, 765, 290HD, MH50 (Item #: 104972, Ref: 196165M1) $30.70

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle RH - This right hand spindle fits Massey Ferguson Industrial 40 and replaces OEM part number 519390M91. Dimension A 10.875 inch, Dimension B 1.495 inch, Dimension C 1.796 inch, Dimension D - 1.250 inch. Replaces 519390M91. The wheel bearing kit used for this spindle is part number WBKMF2. (Item #: 104985, Ref: 519390M91) $190.94

Spindle, LH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102480, Ref: 182560M92) $62.00

Spindle, LH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102476, Ref: 182558M92) $80.00

Spindle, LH - This left hand spindle fits Massey Ferguson Industrial 40 and replaces OEM part number 519390M91. Dimension A 10.875 inch, Dimension B 1.495 inch, Dimension C 1.796 inch, Dimension D - 1.250 inch. Replaces 519391M91. The wheel bearing kit used for this spindle is part number WBKMF3. (Item #: 104986, Ref: 519391M91) $224.00

Spindle, RH - This spindle measures A= 11.625 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, (MF50 Lo-Clearance), MF65. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102479, Ref: 182559M92) $68.00

Spindle, RH - This spindle measures A= 18.00 inch, B= 1.250 inch, C= 1.250 inch, D= .750 inch. For tractor models 40, 50, (65 Hi-Clearance). The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102475, Ref: 182557M92) $72.01

Steering Sector Shaft Bushing - Replacing OEM number 1850018M1, 21910014, this bushing has an inside diameter of 1.252 inches and an outside diameter of 1.382 inches. Used on Massey Ferguson 135, 145, 148, 155, 158, 165, 168, 175, 178, 185, 188, 20B, 20D, 20E, 230, 231, 235, 240, 245, 250, 30E, 35, 35X, FE35, 40, 65, 765. (Item #: 168937, Ref: 1850018M1) $10.40

Steering Wheel - 36 splined center. For tractor models 165, 168, 175, 185, 188, 265, 285, 290, (565 up to serial number 6585483), (575 up to serial number 270719), (590 up to serial number 380795). Replaces original part numbers 1671945M1, 508460M2, 525681M2, 772868M1, 894737M1. (Item #: 152003, Ref: 1671945M1) $42.00

Steering Wheel Nut - This steering wheel nut measures 13/16 inch 20 UNEF Thread. It has a black oxide finish. Used with the following steering wheels (when steering shaft has 13/16 -20 UNEF thread): 1671945M1 385156R1, 366557R2, 70232033, 70233851, A20456, 303051951, 400217R1, 242933, 10A23441, A61007. Replaces 1021464M1, 525743M1, 525743V1, 25743M1, 1853123M1, 10A31498, 208584, 252471, 35114002, 35A14002, 35P51, 367232R1, 368576R1, 70252471, A14567, F19646 (Item #: 126721, Ref: 35P51) $8.00

Tie Rod End - Ball joint end assembly, for power steering cylinder with thread measurement going to the cylinder being 1/2 inch, fine thread. For tractor models MF235 Orchard Diesel, MF245 orchard with cylinder 519283M91, 519284M91, 532225M91 or 532226M91, MF265 serial number 9A324139 and up with cylinder 579149M91 and 579160M91, MF285 serial number 9A281393 and up Industrial. Replaces 1033035M92, 1033035M1. (Item #: 102498, Ref: 1033035M92) $20.50

Tie Rod End (LH) - This Tie Rod End has a 4.375 Inch (A) Threaded Shaft and is 11/16- 18 UN Left Hand Thread (B). Used on Massey Ferguson 2200, 40, (235 Orchard / Gas Serial number 9A223895 and up, /Diesel Serial Number 9A210647 and up), (245 Orchard Serial Number up to 9A349239). Replaces 1032716M91 (Item #: 116817, Ref: 1032716M91) $65.00

Tie Rod End (RH) - This Tie Rod End has a 4.375 Inch (A) Threaded Shaft and is 11/16- 18 UN Right Hand Thread (B). Used on Massey Ferguson 2200, 40, (235 Orchard / Gas Serial number 9A223895 and up, /Diesel Serial Number 9A210647 and up), (245 Orchard Serial Number up to 9A349239). Replaces 1032715M91 (Item #: 116815, Ref: 1032715M91) $65.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All MF40 Parts] [All Massey Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy