Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere AR Parts

[ Turn Off Pictures ]

[Categories]   [All John Deere Models]   [Print]  


Brakes
John Deere AR Brake Housing Gasket.
Brake Housing Gasket.
- Fits John Deere - A (sn: 584000 & up), [AO, AR (sn: 272000 & up)], [60, 620, 630 (No Hi-Crop)]; Replaces: A3789R (Part No: A3789R)
$5.04

John Deere AR Brake Linings With Rivets
Brake Linings With Rivets
- For 60, 620 HI-CROP, 620 ORCHARD, 630 HI-CROP, 630 ORCHARD, 70 HI-CROP, 720 HI-CROP, 730 HI-CROP, A AFTER SN# 410000, AO AND AR AFTER SN# 250000, G, GH, GN, GW. Brake Linings with rivets. Includes (4) linings and 32 rivets. (Part No: AA4253R)
$23.99

John Deere AR Brake Shoe Pair
Brake Shoe Pair
- These brake shoes measure 10-1/2 inches overall outer curved length and 1-3/4 inches wide. Used on John Deere A, G, 60, 70 High-Crop, 630 High-Crop, 730 High-Crop, AO, AR for differential brakes not rear wheel brakes, 620 Orchard and High-Crop, 720 High-Crop. Replaces RE204401, AA314R. Price is for one pair / one wheel. (Part No: AA314R)
$103.50

Clutch
John Deere AR Clutch Adjusting Disc
Clutch Adjusting Disc
- Made from ducitle iron. Will not crack under stress like the original grey cast iron design since ductile iron has far more tensile strength. This part is used on John Deere A up to serial number 647000, AO up to serial number 273079, AR up to serial number 273079. (Part No: A20R)
$63.21

John Deere AR Clutch Adjusting Spring
Clutch Adjusting Spring
- This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Part No: A352R)
$2.85

John Deere AR Clutch Drive Disc
Clutch Drive Disc
- Replaces OEM#s A2448R, AA2279R or AA232R. For model A (Serial# 488000 thru 647999), AR, AO (up thru Serial# 273079) (Part No: R2392)
$159.39

John Deere AR Clutch Drive Disc
Clutch Drive Disc
- For tractor models A (From SN# 648000), AO, AR (From SN# 273080). Replaces A4028R, and AA4635R. (Part No: R0725)
$110.40

John Deere AR Clutch Handle Bushing
Clutch Handle Bushing
- Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Part No: A1197R)
$7.49

John Deere AR Clutch Handle Pivot Bolt
Clutch Handle Pivot Bolt
- The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Part No: D2031R)
$13.75

John Deere AR Clutch Operating Bolt
Clutch Operating Bolt
- 3 used per tractor, sold individually. For tractor models (A up to SN# 647999), (AO, AR up to SN# 273079). (Part No: A135R)
$37.50

John Deere AR Clutch Operating Bolt
Clutch Operating Bolt
- 3 used per tractor, sold individually. For tractor models (A from SN# 648000 and up), (AO, AR from SN# 273080 and up). (Part No: A4031R)
$31.75

John Deere AR Clutch Pulley Brake Pad
Clutch Pulley Brake Pad
- For tractor models A, B, 50, 520, 530, 60, 630, 70, 720, 730. Sold individually. Replaces: AB4748R, AF4748R, RE29790 (Part No: RE29790)
$10.20

John Deere AR Dog, Clutch
Dog, Clutch
- For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Part No: C74R)
$34.13

Cooling System
John Deere AR Fan Belt
Fan Belt
- Drive belt for Generator and water pump. For tractor models A, AO, AR, 60 up to SN# 29999, 70 up to SN# 8099. (Part No: TP-A4287R)
$17.45

John Deere AR Fan Shaft Bearing
Fan Shaft Bearing
- This Fan Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: JD7654)
$36.75

John Deere AR Pulley, Water Pump
Pulley, Water Pump
- 1/2" wide, used on pumps AB262R, AA5570R. For tractor models (50 SN# up to 5016058), (60 SN# up to 6029999), (A SN# 700200 and up), (AO, AR SN# 281400 and up), (B SN# B306600 and up). (Part No: A4283R)
$34.47

John Deere AR Radiator Bolt Kit
Radiator Bolt Kit
- For tractor models (Unstyled A SN# 410000 to 476999), (AR SN# 250000 to 271999), (AO SN# 250000 to 271999). THIS KIT INCLUDES THE CORRECT LENGTH OF HARDWARE WHEN ADDING SHUTTERS. (Part No: JDS1051)
$39.81

John Deere AR Radiator Bolt Kit
Radiator Bolt Kit
- For tractor models (STYLED A, AN, AW, ANH, AWH SN# 477000 and up), (AR 272000 & up), (AO SN# 272000 & UP). (Part No: JDS1053)
$39.81

John Deere AR Radiator Core
Radiator Core
- For Unstyled A 410000 to SN# 476999, Unstyled AO & AR 410000 to SN# 476999. 18 1/2 inches High x 18 5/16 inches Wide X 5 1/2 inches thick. Gasket Set is available separately as part number A432R. (Part No: AA396R)
$232.88

John Deere AR Radiator Core
Radiator Core
- Radiator Core - Styled A (serial number 488000 and up), AO (serial number 260000 and up), AR (serial number 260000 and up), 60. Order A2153R Gaskets if needed. Replaces: AA2235R, AA5582R (Part No: AA2235R)
$281.94

John Deere AR Radiator Filler Neck
Radiator Filler Neck
- For A, AO, AR, B, G Styled. Fits: (A Styled serial number 477000 - 523599 AND serial number 542700 and up), (B serial number 60000 - 148499 AND serial number 167000 - 200999), (G serial number 13000 - 20202). Replaces: AB1607R Radiator Filler Neck. Uses cap AB1621R. This is for narrow neck, 4-1/4 inch outside diameter and 2-5/16 inch where is slides into the tank. (Part No: AB1607R)
$22.50

No
Picture
Radiator Gasket Set
- For tractor models (A unstyled up to SN# 476999 heavy duty), (AO unstyled heavy duty), (AR unstyled up to SN# 259999 heavy duty). (Part No: A432R)
$14.70

John Deere AR Radiator Gaskets
Radiator Gaskets
- These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: A2153R)
$19.92

John Deere AR Radiator Gaskets, Set of 2
Radiator Gaskets, Set of 2
- These radiator gaskets are used with AA2235R radiator core. John Deere A, AO, AR, 60, 620, 630 (Part No: A2153R)
$12.00

No
Picture
Radiator Strap
- For tractor models: 60, 620, 630, 70, 720, 730, A, AO, AR, (G from s/n 13000 and up). (Part No: A192R)
$12.90

John Deere AR Upper Water Pipe, Radiator
Upper Water Pipe, Radiator
- O.D. 2-7/8". For tractor models A Styled SN# 488000 and up, can also fit AR Styled SN# 272000 and up if cut to length. Must weld to existing casting. Replaces AA2237R. Made in the USA. (Part No: A2374R)
$81.35

John Deere AR Water Pump, 1\2 in. pulley
Water Pump, 1/2 in. pulley
- For tractor models 60 with SN# below 6029999, AO, AR both with SN# above 281400, A with SN# above 700200. Water Pump comes with gasket and 1/2" Width Pulley. (Part No: AA5570R)
$151.79

John Deere AR Water Pump, 3\8 in. pulley
Water Pump, 3/8 in. pulley
- For A (SN# 7002000 & above), AO & AR (SN# 281400 & above), 620, 630, 60. Water Pump comes with 3/8" width Pulley. Comes with by-pass connection. Can be used with or without the by-pass connection. If by-pass is not used, plug can be ordered as part # F2282R. Replaces casting number R5318R. (Part No: AA6327R)
$108.61

Decals and Emblems
John Deere AR Decal Set
Decal Set
- Decal Set for John Deere Model AR unstyled only. (Part No: JDAR)
$39.77

John Deere AR Decal Set
Decal Set
- Decal Set for John Deere Model AR Styled only. (Part No: JDAR1)
$39.75

John Deere AR Front Medallion
Front Medallion
- Front medallion for the styled John Deere AO, (AR after serial number 272000), R up to serial #18912). JD yellow on metal background. Licensed John Deere Product. (Part No: AR642R)
$57.76

Drive Train
John Deere AR Gear Shift Knob
Gear Shift Knob
- Plastic knob, 3/8 inch fine thread. For tractor models (A styled from serial number 648000), AR, AO, (B styled from serial number 201000), (G styled from serial number 13000), 50, 60, 70, 80, 520, 530, 620, 630, 720, 730, (820, 830 2-cylinder). (Part No: 03501AB)
$7.50

Electrical System
John Deere AR Coil, Wico
Coil, Wico
- This Magneto Coil is for Wico Model X series magnetos. Fits models A, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BO, BR, BW, BW40, BWH, D, G, GH, GM, GN, GW, H, HN, HNH, HW, HWH, W111, W113, (R with pony engine). (Part No: AR12006)
$55.55

John Deere AR Condenser
Condenser
- For tractor models (A, AO, AR, B, BN, BNH, BW, BWH all styled with distributor SN# XD100 and up) (Part No: K6977)
$15.18

John Deere AR Distributor Bushing and Shim Kit
Distributor Bushing and Shim Kit
- Delco Distributor Bushing and Shim Kit.Fits John Deere A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 50, 60, 70 all with Delco distributor number 1111558. Replaces: lock washer: 12H40C, nut: 14H774R, bushing: 1917207, woodruff key: 26H3R, shim washers (2): 811912. This bushing and shim kit has an 0.486" I.D., 0.656" O.D. and 1.989" length. Bushing must be sized to shaft after installation. (Part No: JDS3012)
$21.00

John Deere AR Distributor Cap
Distributor Cap
- This Distributor cap for a 2 Cylinder with a Delco Distributor, Vertical, 12 Volt. Plug connectors on cap are at 90 degrees or 12:00 o-clock and 3:00 o-clock. For Delco distributors up to 1963 on models: A, AR, AO, B, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010, 114W, 116W, 323W. Balers~ 25, 30, 40, For 1010, 105, 114W, 116W, 12, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99, A, AO, AR, B, G, M. (Part No: 1935038)
$9.14

John Deere AR Distributor Dust Cover
Distributor Dust Cover
- Fits early Delco Distributor with Clip Held Cap. For tractor models A, AR, AH, AN, ANH, AO, B, BR, BN, BNH, BW, BWH, G, GN, GW, M, MC, MI, MT, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010, 2010, 3010, 4010. (Part No: 1900119)
$8.54

John Deere AR Distributor Point Set
Distributor Point Set
- This Point Set is for a WICO DB Distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873)~ For 1010, 1020, 105, 12, 2010, 2020, 215, 215A, 217, 2510, 299, 323W, 40, 45, 50, 55, 600, 65, 700, 95, 99, A, AO, AR, B. (Part No: AR12003)
$14.54

John Deere AR Distributor Point Set
Distributor Point Set
- This Point Set is for a WICO XB distributor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. Baler~ 40, 45, 55, 65, 95, 105. Combines~99, 299. Cotton pickers~ 12. Forage harvester~ 600, 700. Hi-Cycles, TA145, 217 Power Units~ 215, 215A Windrowers. A(659290-662873. (Part No: AR12014)
$20.93

John Deere AR Distributor Terminal Insulator Assembly, Delco
Distributor Terminal Insulator Assembly, Delco
- Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. Used on some of the following using Delco distibutors: A, AH, AN, ANH, AO, AR, AW, AWH, B, BN, BNH, BW, BWH, BWH40, D, G, GH, GM, GN, GW, 1010, 2010, 3010, 4010, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730. Replaces: 12H290R, 817363, 1909206, 1914142, 1916805, 1916806 (Part No: 1904376)
$16.88

John Deere AR Distributor, New
Distributor, New
- Built exactly like the original, this new distributor replaces Delco 1111558. Complete and ready to install. (Part No: 1111558NEW)
$310.50

John Deere AR Generator Pulley
Generator Pulley
- Used on John Deere models: A, B, G, 50, 60, 70, AO, AI, AR, BO, BR, D, H. This pulley fits Delco generator numbers: 1100955, 1101356, 1101371, 1101777, 1100506, 1100508, 1101390, 1101755, 1100955, 1101385, 1101401, 1101720, 1101756, 1101784, 1101377. The pulley measures 4.500 inches outside diameter, 0.507 inch belt groove width, 0.670 inch inside diameter, with a 0.127 inch keyway. This part replaces OEM B1030R (Part No: B1030R)
$30.42

John Deere AR Ignition Kit, Delco Clip-Held Distributor Cap
Ignition Kit, Delco Clip-Held Distributor Cap
- Contains points, condenser, and rotor. VERIFY DISTRIBUTOR NUMBER TO ENSURE FIT. For: A, AN, AH, AR, AO, B, BN, BW, D, G, M, 40, 50, 60, 70, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 1010(to 42000), 2010(to 42000), 3010 (to 1E32999), 4010(to For 1010), 105, 114W, 116W, 2010, 215, 215A, 25, 299, 30, 3010, 320, 323W, 330, 40, 4010, 420, 430, 440, 45, 50, 520, 530, 55, 60, 600, 620, 630, 65, 70, 700, 720, 730, 95, 99. For Delco distributor numbers 1111716, 1112583, 1112589, 1112557, 1112570, 1112585, 1111722, 1111737, 1112583. (Part No: ATK1DCR)
$8.48

John Deere AR Key Switch, 2 Terminal
Key Switch, 2 Terminal
- With keys. For tractor models 420, (A from SN# 662874 and up), (AO, AR from SN# 275533 and up), (B from SN# 268820 and up), (G from SN# 46501 and up), 80, (820, 830 2-cylinders). Replaces A4699R, AA5592R, AB4063R, AB4087R. (Part No: AB4063R)
$34.88

John Deere AR Magneto Cap with Gasket
Magneto Cap with Gasket
- For WICO model X, for tractors AO, AR, A, B, BO, BR, D, G, H, R. Replaces: gasket: X5618, X5644, cap: X5643 (Part No: X5643)
$51.20

John Deere AR Magneto Coil
Magneto Coil
- For WICO model C magneto. For tractors A, AO, AR, B, BO, BR, D, G, H. Replaces: AR12011R and X2766. (Part No: X2766)
$82.73

John Deere AR Magneto Coil
Magneto Coil
- For WICO model X. For tractors A, AO, AR, B, BO, BR, D, G, H, R (Part No: X5700)
$55.89

John Deere AR Magneto Condenser
Magneto Condenser
- For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: TP-AR31316)
$25.45

John Deere AR Magneto Ignition Kit
Magneto Ignition Kit
- Ignition kit, less rotor. Contains:Points, gauge, condenser. 2-piece points using Wico XB Distributor. For A(659290- 662873)~ AR, AO(275397-532), B(268804 and up), 50(5000001 - 5016449). For 50, A, AO, AR, B (Part No: ATK8WXB)
$23.22

John Deere AR Magneto Point Set
Magneto Point Set
- For Wico C magneto. For tractor models A, AO, AR, B, BO, BR, D, G, GH, L, LA, LI. (Part No: AR31317)
$27.02

John Deere AR Magneto Point Set
Magneto Point Set
- For XH894, XH477B, XH1042, XH3001, XH909 Magnetos. (Part No: FXH2100B)
$22.43

John Deere AR Magneto Rotor
Magneto Rotor
- For WICO X Magnetos. Fits A, AO, AR, D, G, GH, R, All with WICO magneto (SN# XC100>) (Part No: AR31318)
$20.51

John Deere AR Magneto Tune Up Kit
Magneto Tune Up Kit
- Fits Wico X, XB, XH, XV magnetos Kits contain heavy duty point set, vibration-resistant condensor, and rotor. For tractor models 1010, 1020, 2010, 2020, 2510, 50, A, AO, AR, B. (Part No: 569632)
$45.54

John Deere AR Starter Switch
Starter Switch
- For tractor models A up to serial number 502231, AO up to serial number 272000, AR up to serial number 272000, B up to serial number 200999), H, L, LA, M, MC, MT, R, 320, 330, 40, 420, 430, 440, 50, 60. Replaces: 1882323, AT21265. (Part No: 1925781)
$3.02

John Deere AR Voltage Regulator Conversion Kit
Voltage Regulator Conversion Kit
- Used with VR1813 and VR1814 regulators when replacing Delco Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. A, AO, AR, B, BO, BR, G, H, L, LA, M, MC, MI, MT (Part No: VRK1815)
$37.76

John Deere AR Voltage Regulator Upgrade Kit, 6 Volt
Voltage Regulator Upgrade Kit, 6 Volt
- For A, AO, AR, B, BO, BR, G, L, LA. Kit includes VR1813 External Voltage Regulator and VRK185 Voltage Regulator Conversion Kit. 6 Volt. For Generators 1101356, 371, 377, 385. Used if replacing Delco Remy Cutouts 1116766, 1116807, 1116809 and 1116816 or control units 5839, 5851 and 5894, therefore modernizing Generator System. (Part No: VR1813_VRK1815)
$67.26

Engine Bearings
No
Picture
Rod Bearing
- For A, AH, AN, and AW S#488000 & up, AO and AR S#260000 & up, and 60. Rod Bearings. Available in Standard, .010 and.020. Specify size in comments section of order form when ordering. Priced each. If you order 1, you will receive bearings for 1 rod. (Part No: CB-468P)
$25.20

Engine Gaskets
John Deere AR Flywheel Spacer Washer
Flywheel Spacer Washer
- Flywheel Spacer Washer has a 2.375 inch Inside Diameter, a 3.205 inch Outside Diameter and is .365 inch wide. Installs in oil slinger housing behind the flywheel. It Fits: A, AH, AN, ANH, AW, AWH (up to SN: 671594), AI, AOS, G, GH, GM, GN, GW, W111, W113, AO, AR (up to SN: 276577), D, DI (SN: 53388 and up). Replaces: D2124R (Part No: D2124R)
$16.43

John Deere AR Head Gasket Set
Head Gasket Set
- To serial number 487999. Upper Gasket Set. For tractor models A, AO, AR. Comes with Lead Washers. (Part No: HS7380S)
$148.84

John Deere AR Head Gasket Set
Head Gasket Set
- For tractor models (A, AH, AN, AW all From S#584000), (AO, AR Serial Number 272000-281999). (Part No: HS1699S)
$80.77

John Deere AR Overhaul Gasket Set
Overhaul Gasket Set
- For A, AH, AN, and AW up to S#488000 and AO and AR up to S#260000. Full Gasket Set. (Part No: FS7380S)
$195.86

No
Picture
Overhaul Gasket Set
- For A, AH, AN, and AW S#488000 to 583999 and AO and AR S#260000 to 271999. Full Gasket Set WITHOUT CRANKSHAFT SEALS. (Part No: FS7744-1)
$138.02

John Deere AR Valve Cover Gasket
Valve Cover Gasket
- This valve cover gasket fits the following tractor models: A, AO, and AR. Replaces part number: A1575R. (Part No: A1575R)
$14.18

Engine Rebuild Kits
John Deere AR Rebore Kit
Rebore Kit
- For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1/2" Bore STANDARD. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750". (Part No: R2457)
$524.40

John Deere AR Rebore Kit, .045
Rebore Kit, .045
- For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1/2" Bore - .045 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin, pin size 1.750". (Part No: R2458)
$524.40

John Deere AR Rebore Kit, .090
Rebore Kit, .090
- For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1/2" Bore - .090 OVERBORE. Contains pistons, rings, pins, and retainers. Kit contains taller than stock piston to increase compression. Kit may require boring rod bushing for larger piston pin. (Part No: R2459)
$524.40

John Deere AR Rebore Kit, .125
Rebore Kit, .125
- For A, AH, AN, AW up to SN# 584000, AO, AR up to SN# 272000. 5 1/2" Bore - .125 OVERBORE. Contains pistons, rings, pins, and retainers. (Part No: R2460)
$524.40

No
Picture
Valve Train Kit
- Kit contains valves, guides, springs and locks. For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: VTKJDA)
$311.85

No
Picture
Valve Train Kit
- Kit contains valves, guides, springs and locks. For tractor models (A from SN# 488000 and up), (AO, AR from SN# 260000 and up), 60. (Part No: VTKJD60)
$276.41

Engine Parts
John Deere AR Crankcase Vent Tube
Crankcase Vent Tube
- For tractor models: 60 without power steering, 620, 630, (A from s/n 648000), (AO, AR from s/n 273080). (Part No: A4035R)
$33.50

John Deere AR Governor Shaft Bearing
Governor Shaft Bearing
- This Governor Shaft Bearing measures; 0.750 Inch Inside Diameter, 2.080 Inch Outside Diameter, 0.609 Inch wide outer race. All metal construction. Can be used as a governor shaft, fan shaft and ventilator pump bearing assembly. Two used for each application. Priced and sold individually. Also used on automotive applications, replacing New Departure number: ND 909001. Replaces: JD7654, JD7654R, JD7655, JD7655R, JD7656, JD7656R, JD7657, JD7657R, B01 (Part No: JD7654)
$36.75

John Deere AR Ring Gear, Flywheel
Ring Gear, Flywheel
- This ring gear has 168 teeth and inside diameter just under 20 inches. For tractor models (A SN# 477000 to 583999), (AO, AR up to SN# 271999), (G, 70, 720, 730 diesel). (Part No: A2238R)
$119.23

No
Picture
Valve Guide
- For A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. Valve Guide. (Part No: 217-3644)
$10.45

John Deere AR Valve Guide
Valve Guide
- For tractor models (A up to SN# 487999), (AO, AR SN# up to 259999. Replaces A35R (Part No: AA4896R)
$22.95

No
Picture
Valve Lock - Pair
- This pair of valve locks is a set for 1 valve. For tractor models 60, 620, 630, 720, 730, 80, (820, 830 2 cylinders), (A from SN# 488000), (AO, AR from SN# 260000 and up), R, (70 gas, LP and diesel). (Part No: A2332R)
$21.98

No
Picture
Valve Lock Pair
- For tractor models (A up to SN# 487999), (AO, AR both up to SN# 259999). (Part No: A130R)
$27.30

John Deere AR Valve Spring
Valve Spring
- For tractor models 60, A, AO, AR, R. (Part No: A356R)
$18.00

John Deere AR Valve Spring Retainer
Valve Spring Retainer
- For tractor models (A up to SN# 487999), (AO, AR up to SN# 271999), R. (Part No: A245R)
$30.75

John Deere AR Valve, Exhaust
Valve, Exhaust
- For tractor models A, AH, AN, AW, all with SN# after 488000. AO, AR both with SN# after 272001. 60. (Part No: R-A3618R)
$29.63

No
Picture
Valve, Exhaust
- For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). Replaces A4739R, AA1811R, AA4959R. (Part No: A588R)
$27.23

John Deere AR Valve, Intake
Valve, Intake
- For tractor models A, AH, AN, AW all with SN# after 488000. AO, AR both with SN# after 272001. 60. Intake Valve. (Part No: R-A4193R)
$22.44

John Deere AR Valve, Intake
Valve, Intake
- For tractor models (A up to SN# 487999), (AO, AR up to SN# 259999). (Part No: A454R)
$19.95

Engine Rings
No
Picture
Piston Ring Set
- Set for 1 engine. Used on engines with 3 Compression rings and 2 Oil Ring at 1/4 inch each, on each piston. For tractor models A, AO, AR. (Part No: 2C722.STD)
$154.46

), AO (SN# 272000>), AR (SN# 272000>)." />
No
Picture
Piston Rings .045
- Piston Ring Set. 1 required for complete engine. 0.045 OVERBORE, standard bore size 5.5", 4 compression rings at .186 inch, 1 oil ring @.3105 inch on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-45)
$157.31

), AO (SN# 272000>), AR (SN# 272000>)." />
No
Picture
Piston Rings .090
- Piston Rings Set. 1 required for complete engine. 0.090 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-90)
$154.37

), AO (SN# 272000>), AR (SN# 272000>)." />
No
Picture
Piston Rings .125
- Piston Ring Set - 1 per 2 cyl engine. 0.125 OVERBORE, standard bore size 5.5", 4 compression rings at .186", 1 oil ring @.3105" on 321 CID gas engine. Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195-125)
$157.31

), AO (SN# 272000>), AR (SN# 272000>)." />
No
Picture
Piston Rings, STD
- Piston Ring Set, Complete for 1 engine. 321 CID Gas engine STANDARD 5.5 inch bore, 4 compression rings at .186", 1 oil ring at .3105". Fits 60, A (SN# 584000>), AO (SN# 272000>), AR (SN# 272000>). (Part No: PR195)
$147.76

Exhaust System
John Deere AR Exhaust Pipe, OEM
Exhaust Pipe, OEM
- For AO, AR (From S#272000). Replaces OEM# AA4370R. (Part No: R2102OE)
$53.87

1938-1953), 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826." />
John Deere AR Muffler, Vertical
Muffler, Vertical
- Vertical muffler with dent, round body 4-Bolt Base plate, 2-1/2" exhaust O.D., ~ 24-1/2" total length~ 3-3/4 body diameter. For tractor models: (A, AR, AN, AW, AWH all 1933-1952), G (SN# 410000> 1938-1953), 60, 70, 620, 720 (gas & all fuel). Replaces AF3770R and R21826. (Part No: AA2214R)
$35.97

John Deere AR Muffler, Vertical
Muffler, Vertical
- Round body 4-1/4" shell diameter, 4 bolt mounting plate, A= 4-1/2" inlet length, B= backing plate, C= 14-1/2" shell length, D= 2-1/2" outlet length, E= 2-5/8" outlet O.D., F= 21" overall length. For tractor models (A, AN, ANH, AR, AW all SN# 410000 and up), 60, 620, 70, 720. This style is not available from the OEM. (Part No: R21826R)
$30.50

John Deere AR Stud Nut, Manifold
Stud Nut, Manifold
- Original 7/16 inch style with oversized shoulders. Replaces 10A1052, 17890A, 30-3462161, 369065X1, 50A1008, 915834. For the following tractors: A, B, AI, AR, BO, BR, H (Part No: R5294)
$2.24

John Deere AR Stud, Manifold
Stud, Manifold
- 7/16" x 5-1/2". For tractor models (A from SN# 410000 to 487999), (AO, AR from SN# 250000 to 259999). Use R5294 nut. (Part No: A125R)
$6.98

John Deere AR Stud, Manifold
Stud, Manifold
- 7/16" x 4-3/8". For tractor models A, (AO, AR from SN# 272000 to 281999), B, (BO, BR from SN# 325000 and above), H. Replaces R2622R. Uses R5294 nut. (Part No: A126R)
$6.30

John Deere AR Stud, Manifold
Stud, Manifold
- 7/16" x 3-1/2". For tractor models (A from SN# 488000 and above), (AO, AR from SN# 272000 to 281999). Uses R5294 nut. (Part No: A2385R)
$6.30

John Deere AR Stud, Manifold
Stud, Manifold
- 7/16" x 4-3/4". For tractor models (A all-fuel from SN# 488000 to 583999), (AO, AR from SN# 250000 to 259999), (B from SN# 1000 to 529999). Uses R5294 nut. (Part No: B359R)
$6.98

Fuel System / Air Intake
John Deere AR 3-Way Fuel Valve
3-Way Fuel Valve
- Made of brass. For tractor models (A SN# 497590 to 697756), (AR, AO SN# 260000 to 280849), (B SN# 94494 to 305246), (D SN# 148872 to 191777), (H SN# 20650 and up), (G SN# 13000 to 59701). (Part No: AB2805R)
$93.15

John Deere AR 3-Way Fuel Valve
3-Way Fuel Valve
- For tractor models (AR SN# 250000-259999), (B SN# 11622-59999), (BR SN# 325000 and up), (G (SN# 1000-12999). (Part No: AB609R)
$75.21

John Deere AR Carburetor Float, DLTX
Carburetor Float, DLTX
- For A, AO, AR, B with Marvel-Schebler Carburetors DLTX13, DLTX67, DLTX71, DLTX72, DLTX73. (Part No: AR10068)
$33.00

John Deere AR Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This comprehensive carburetor rebuild kit is made to service the original Marvel-Schebler design and fits the following tractor models: A. It is being used for carburetors with the numbers matching: DLTX71 and DLTX72. (Part No: MS-JD72C)
$109.01

John Deere AR Fuel Control Rod
Fuel Control Rod
- For tractor models: (A electric start from s/n 497590 to 583999), (AR electric start up to s/n 259999), (G from s/n 13000 and up). (Part No: A2291R)
$22.46

John Deere AR Fuel Indexing Stop
Fuel Indexing Stop
- Used by John Deere in 1939 and 1940 only, this Fuel Indexing Stop fits: B serial number 60000 to 94493, A serial number 477000 to 497589, D serial number 143800 to 148871, BR and BO serial number 325000 to 332099, AR and AO serial number 250000 to 259999. (Part No: B1535R)
$31.71

John Deere AR Sediment Bowl Assembly
Sediment Bowl Assembly
- Cast top with glass bowl, all fuel style for use with 3-way valve. For tractor models AO, AR, B, BO, BR, D, G, GP, H. (Part No: AA499R)
$36.23

John Deere AR Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Part No: 49923D)
$3.11

Gauges
John Deere AR Amp Gauge
Amp Gauge
- For tractor models A, AO, AR, B, BO, BR, LA, LI, GN, GW, 50, 60, 70, 80, 320, 33, 520, 620, 630, 720, 730, 820, 830. This gauge has a plain face without a John Deere logo. This 20-0-20 ammeter has a metal base, glass lens, black faceplate and a black bezel. Replaces AM1864T, AF2749R. (Part No: R3803)
$21.90

John Deere AR Oil Gauge Adapter Fitting
Oil Gauge Adapter Fitting
- This Oil Gauge Adapter Fitting is 1/8 inch NPT female to 3/16 inch tubing female. It is used on some gauges without removable fitting. (Part No: 9N18685)
$3.75

John Deere AR Tachometer
Tachometer
- This new tachometer fits; A serial number 648000 and up, AO and AR serial number 272000 and up, B serial number 201000 and up, [ 50, 520, 530, 60, 620, 630, 70, 720, 730 (Gas/Lp) ], [ 70, 720, 730 (Diesel) ], [ 80, 820 2 cylinder, 830 2 cylinder, 840 2 cylinder (Serviceable, Face plate will have the wrong Mph.) ]; Replaces: AB5132R, AB5134R, AF1719R, AF2066R, AF2698R, AR20055R, AR20825, AR20836, AR21661, AR21662, AR21663, AR21663R, AR21664R (Part No: R4611)
$104.19

John Deere AR Tachometer Bracket
Tachometer Bracket
- For tractor models 50, (A from SN# 648000 and above), (B from SN# 201000 and above), (AO, AR from SN# 272000 and above), 60. (Part No: A4875R)
$26.06

John Deere AR Tachometer Cable
Tachometer Cable
- For tractor models 50, (A from SN# 648000 and above), (AO, AR from SN# 272000 and above), (B from SN# 201000), G, 60, (70 gas). Replaces AB4765R, AB4776R. (Part No: AB4737R)
$39.81

John Deere AR Water Temperature Gauge
Water Temperature Gauge
- Black face. 72 inch lead. Without John Deere Logo. 140-230. For tractor models A, AR, B, D, G, M, R, 40, 50, 60, 70, 80, 320, 330, 420, 430, 440, 520, 530, 620, 630, 720, 730, 820, 830, 840. Also replaces AA6295R, AA7263R, AM2444T, AT13849T, AR20783R. (Part No: AR490R)
$29.25

Hydraulic System
John Deere AR Hydraulic Block Off Plug (Dummy Plug)
Hydraulic Block Off Plug (Dummy Plug)
- Used on Swinging style lever Powr-Trol Serial number PCV-67905 and up. This part has 1/2 inch pipe thread. This part replaces John Deere part numbers AA4981R, AA4321R (Part No: AA4321R)
$42.66

John Deere AR Hydraulic Block-Off 'Dummy' Plug
Hydraulic Block-Off 'Dummy' Plug
- Fits all with locking nut style coupler. Measures 0.685 inches outside diameter, 5.377 inches overall length, For locking nut style coupler. Note: Fits PowerTrol SN # PCV-100 to 67904. Only fits early serial numbers. Later serial numbers use AA4321R. This part replaces AA3762R, AA4980R (Part No: AA3762R)
$42.66

Lights
John Deere AR Dash Light - 6 Volt
Dash Light - 6 Volt
- For JD B, BR, D, AR, R, 70D, 80. (Part No: AD2835R-6V)
$31.43

John Deere AR Headlight
Headlight
- This headlight, sold each, is for models A, AO, AR, B, D, G, H, R, 50, 60, 70. Teardrop Headlight, 12 volt, 5" Diameter. Also replaces AF3816R. (Part No: AF710R)
$53.75

John Deere AR Headlight Gasket
Headlight Gasket
- Black rubber, like original with staple. For use in 4 inch diameter light assembly. Used with 53523D. For the following tractors: A, B, 50, 60, 70, 630, 730, AO, AR, D, H, R, 80, 520, 530, 620, 720, 820, 830. Replaces AA2329R, 53527D. (Part No: 53527D)
$4.20

John Deere AR Headlight Reflector
Headlight Reflector
- Item is interchangeable with your original and measures 4-1/2" measure directly across the top of the housing. For the following tractors: ( A, B with sheet metal dash), 70 gas and diesel, 730 gas and diesel, D up to serial number 143800, 720 gas and diesel, 50, 60, 630, AO, AR, H, R, 80, 520, 530, 620, 720, (820, 830 2 cylinder). Replaces 53523D, AA3238R. (Part No: AA3238R)
$17.38

John Deere AR Headlight, 12 Volt
Headlight, 12 Volt
- 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3144R, AD2450R, AD2451R. (Part No: AB3145R)
$90.09

John Deere AR Headlight, 6 Volt
Headlight, 6 Volt
- 7", with "guide" name. For tractor models (A SN# 477000-500011), (AO, AR SN# 250000-259999), (B SN# 60000-95999), (BO, BR SN# 325000 and up), (D SN# 35310-188057). Replaces AB3145R, AD2450R, AD2451R. (Part No: AB3144R)
$90.09

John Deere AR Headlight, Teardrop
Headlight, Teardrop
- Teardrop Headlight - 6 Volt - 5 inch Diameter For tractor models A, AO, AR, B, D, G, H, R, 50, 60, 70. Also replaces OEM# AF3817R. Restoration Quality. (Part No: AA3075R)
$44.63

John Deere AR Light Bracket, Headlight
Light Bracket, Headlight
- For A from SN# 477000 to 500011. For AO and AR up to SN# 276799. For B from SN# 60000 to 95999. For BO and BR after SN# 325000. For tractor models D, 80, 820, 830. Light Bracket. (Part No: D2914R)
$53.08

John Deere AR Light Lens
Light Lens
- For 7 inch Teardrop Lights. For tractor models A, AO, AR, B, BO, BR, D. Replaces: B1725R (Part No: R4242)
$23.40

John Deere AR Tail Light \ Dash Light Bulb - 12-Volt
Tail Light / Dash Light Bulb - 12-Volt
- This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 to 12 Volts. Replaces: AD1855R, AD2082R, AD2834R, AD2835R, AR1563R, AR20447R, AR26757R, AR33479R, AR35993R, B1728R, RE13195R (Part No: TLBULB12V)
$1.14

Oil System
John Deere AR Engine Oil Pump Strainer Screen
Engine Oil Pump Strainer Screen
- Used on John Deere: A Serial Number 424025-487999, B up to Serial Number 95999, G, AO Serial Number 251486-259999, AI Serial Number 251486-259999, AR Serial Number 251486-259999, BO, BR. (Part No: AB284R)
$31.50

John Deere AR Engine Oil Pump Strainer Screen
Engine Oil Pump Strainer Screen
- Used on John Deere models: A Serial Number 488000-583999, B Serial Number 96000-200999, AO Serial Number 260000-271999, AR Serial Number 260000-271999. (Part No: AA2258R)
$31.50

John Deere AR Oil Pump Drive Shaft Coupling
Oil Pump Drive Shaft Coupling
- For tractor models A series after sn 424025, B series, G series, 50, 60, 70 gas, 520, 530, 620, 630, 720 gas, 730 gas. (Part No: B250R)
$19.95

PTO / Driveline
John Deere AR PTO Oil Seal
PTO Oil Seal
- Fits John Deere - [A, AH, AN, ANH, AW, AWH (Used as a rear PTO oil seal (serial number 488000-UP)], [AO, AR (Used as a rear PTO oil seal serial number 260000 and up)], [B, BN, BNH, BW, BW40, BWH, BWH40 (Used as a rear PTO oil seal serial number 149700 and up)], [BO, BR (Used as a rear PTO oil seal serial number 333100 and up)], [G, GH, GM, GN, GW (Used as a rear PTO oil seal serial number 43352 and up)], [R, 50, 520, 530, 60, 620, 630, 70, 70D, 720, 720D, 730, 730D (used as a rear PTO oil seal)], 2010 (used as a transmission drive shaft seal), [3010, 4010 (Used as a front PTO oil seal)]; Replaces: AA2296R, AT11888, AT11931, AT16076. (Part No: 71701C1)
$11.46

John Deere AR PTO Seal
PTO Seal
- This PTO seal has a 1.125 inch Inside Diameter, a 1.832 inch Outside Diameter and is .25 inch wide. For tractors equipped with PTO shield and flipper guard casting #B1679R. It Fits: A, AN, ANH, AW, AWH (Up to Serial Number 487999), AO, AR (Serial Number 258330 - 259999), B, BN, BNH, BW, BWH (Up to Serial Number: 149699), BO, BR (Serial Number 331077 - 333099). Replaces: AB2578R, 476838 (Part No: AB2578R)
$15.75

Paint
No
Picture
Paint, Classic Green, 1 Gallon
- Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215GAL)
$44.00

No
Picture
Paint, Classic Green, 1 Quart
- Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215QT)
$17.55

No
Picture
Paint, Classic Green, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** Green Paint for 2 cylinders include models A, AO, AR, B, BO, BR, C, D, GP, P, G, L, LA, H, M, MT, MC, Y, 62, R, 40, 50, 60, 70, 80, 320, 420, 520, 620, 720, 820, 330, 430, 530, 630, 730, 830, 435, 440, 840. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP215SP)
$44.19

Sheet Metal / Body Parts
John Deere AR Flywheel Cover Guard
Flywheel Cover Guard
- Used on John Deere A 477000 - 498999, 1939-1940 4 Speed, AR and AO To serial number 271999. This part should be fit to tractor before painting. (Part No: AA2011R)
$120.75

John Deere AR Grill Screen
Grill Screen
- Grill Screen measures 29 3/4 inches x 21-3/8 inches. For tractor models AO, AR, and 620 Standard, (60 standard up to SN# 6042999). Pleated Screen. (Flanges are not included)Replaces OEM# A3724R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R1025)
$70.31

John Deere AR Step with Bracket
Step with Bracket
- Fits A, AO, AR, B, BO, BR, G, 50, 60, 70, 520, 530, 620, 630, 720, 730. Replaces OEM# A5234R or F3195R. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R2098)
$57.23

No
Picture
Toolbox
- For tractor models: (AO, AR up to s/n 271999), BO, BR. (Part No: AB689R)
$54.12

Steering
John Deere AR Spindle
Spindle
- Spindle, LH/RH, Dimension A-14.375 inch, B-1.5 inch, C-1.625 inch, D-1.312 inch. Fits A, AO, AR, B, G, GH, 50, 520, 530, 60, 620, 630, 70, 720 All with Factory Wide Fronts only. The wheel bearing kit used on this spindle is kit part number WBKJD1. (Part No: AA5789R)
$294.98

John Deere AR Spindle Bushing
Spindle Bushing
- Has an inside diameter of 1.504 inches and an outside diameter of 1.753 inches. Two used per spindle. Price shown is for each, sold only in multiples of 2 items. Used on John Deere AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: A877R)
$9.66

John Deere AR Spindle Thrust Washer
Spindle Thrust Washer
- This Spindle Trust Washer is used on A (with factory wide fronts only), AO (with factory wide fronts only), AR (with factory wide fronts only), B (with factory wide fronts only), GH (with factory wide fronts only), 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 4230, 4320, 50 (with factory wide fronts only), 520 (with factory wide fronts only), 530 (with factory wide fronts only), 60 (with factory wide fronts only), 620 (with factory wide fronts only), 630 (with factory wide fronts only), 70 (with factory wide fronts only), 720 (with factory wide fronts only), 730 (with factory wide fronts only). 1.500 inch inside diameter, 2.750 inch outside diameter. Two used per spindle. Sold individually. (Part No: A890R)
$8.57

Wheels
No
Picture
Wheel Bearing Kit
- For A, B, D, G, 50, 520, 60, 620, 70, 720, 730, (AO, AR, GH, 530, 630, all with Factory Wide Fronts ONLY). Wheel Bearing Kit for 1 Wheel. Kit contains 1 each of the following p/n 3383, 3320, 2785, 2720, D636R; which cross to the numbers JD7270, JD7224, JD7266, JD7216, D636R. (Part No: WBKJD1)
$79.35



Accessories / Supplies
John Deere AR Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
John Deere AR Brake Rivet Tool
Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$40.58

Cooling System
John Deere AR Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

John Deere AR Radiator Drain Tap
Radiator Drain Tap
- This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: AM2780T, AM292T, AT13740. (Part No: C9NN8115A)
$3.36

Decals and Emblems
No
Picture
2 Legged Deer Decal
- John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697)
$9.77

John Deere AR 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696)
$9.77

No
Picture
2 Legged Deer Decal
- John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695)
$9.77

No
Picture
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186)
$16.28

John Deere AR 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187)
$16.28

John Deere AR 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188)
$25.94

No
Picture
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189)
$16.28

John Deere AR 4 Legged Deer Decal
4 Legged Deer Decal
- "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184)
$33.52

No
Picture
4 Legged Deer Decal
- Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185)
$33.52

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

John Deere AR Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

John Deere AR Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

John Deere AR Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.47

John Deere AR Coil - Universal 12V
Coil - Universal 12V
- Universal coil fits many models. This Coil comes with an external resistor which can be removed if you need a coil with no resistance. Also comes with a mounting bracket. Coil is designed to be used on a 12 volt tractor system with the resistor or 6 volt without the resistor. Replaces: AA4879R, AA4983R (Part No: D5TE12029AB)
$9.65

John Deere AR Magneto Cap, 2 Cylinder
Magneto Cap, 2 Cylinder
- For tractor models using WICO XH magneto ONLY. (Part No: 1006501)
$50.88

John Deere AR Magneto, Wico XH & XHD, Service & Parts Manual
Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

John Deere AR Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

John Deere AR Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

No
Picture
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
John Deere AR Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

John Deere AR Silicone Copper RTV
Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$11.10

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$152.21

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

John Deere AR Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

John Deere AR Chrome Exhaust System
Chrome Exhaust System
- This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

John Deere AR Muffler Clamp, 1-1\2
Muffler Clamp, 1-1/2
- New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.39

John Deere AR Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

John Deere AR Muffler Clamp, 1-1\8
Muffler Clamp, 1-1/8
- New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

John Deere AR Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.99

John Deere AR Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

John Deere AR Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.18

John Deere AR Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

John Deere AR Muffler Clamp, 2-3\8
Muffler Clamp, 2-3/8
- New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

John Deere AR Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

John Deere AR Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

John Deere AR Muffler Clamp, 3-1\4
Muffler Clamp, 3-1/4
- New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

John Deere AR Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

John Deere AR Muffler Clamp, 4-1\2
Muffler Clamp, 4-1/2
- New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

John Deere AR Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$6.51

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.69

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$10.34

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

John Deere AR Rain Cap
Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

John Deere AR Stainless Steel Clamp, 2.5 Inch
Stainless Steel Clamp, 2.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

John Deere AR Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

John Deere AR Stainless Steel Clamp, 3.5 Inch
Stainless Steel Clamp, 3.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

John Deere AR Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
John Deere AR Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

John Deere AR Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

John Deere AR Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

John Deere AR Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

No
Picture
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.90

John Deere AR Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

John Deere AR Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

Gaskets
John Deere AR Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

Gauges
John Deere AR Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$3.08

John Deere AR Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

John Deere AR Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

John Deere AR Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

John Deere AR Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

John Deere AR Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.88

John Deere AR Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.68

John Deere AR Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
John Deere AR HAIR PIN ASSORTMENT
HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

John Deere AR Hitch Ball 10000LB 2-5\16
Hitch Ball 10000LB 2-5/16
- 2-5/16 inch ball size, 1-1/4 inch stud thread, 2-1/2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

John Deere AR Hitch Ball 15000LB 2-5\16
Hitch Ball 15000LB 2-5/16
- 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

John Deere AR Hitch Ball 2000LB
Hitch Ball 2000LB
- 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB MAX LOAD CAPACIRY, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

John Deere AR Hitch Ball 3500LB
Hitch Ball 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

John Deere AR Hitch Ball 5000LB
Hitch Ball 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

John Deere AR Hitch Ball 5000LB 2-5\16
Hitch Ball 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

John Deere AR Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

John Deere AR Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$3.15

John Deere AR Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

John Deere AR Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

John Deere AR Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

John Deere AR Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$63.65

Implements
John Deere AR Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

John Deere AR Axle Nuts (5)
Axle Nuts (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

John Deere AR Bearing Cup
Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

John Deere AR Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

John Deere AR Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

John Deere AR Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

John Deere AR Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

No
Picture
Graphite Lubricant
- Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

John Deere AR HUB with BRG CUPS
HUB with BRG CUPS
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

John Deere AR Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Part No: 241166)
$97.46

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Part No: 241163)
$109.42

John Deere AR Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

John Deere AR Tail Wheel Assembly
Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
John Deere AR Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

John Deere AR Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

John Deere AR Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

John Deere AR Work Lamp, HID, Flood Light
Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

John Deere AR Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

John Deere AR Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Miscellaneous
No
Picture
Cab Foam Kit
- With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab (Part No: R1235)
$294.33

John Deere AR Cab Foam Kit
Cab Foam Kit
- With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$346.95

No
Picture
Cab Foam Kit
- 7-Piece - Black For tractor models with Hinson Cab. (Part No: R3247)
$333.80

John Deere AR Canopy
Canopy
- 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

No
Picture
Canopy Mounting Kit, 4 Post
- Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

No
Picture
Canopy Mounting Kit, Hoop Type
- Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

John Deere AR Canopy, Small Tractors
Canopy, Small Tractors
- 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

John Deere AR Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

John Deere AR Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- This UNIVERSAL Blue 3-Bow Deluxe Canopy comes with bows and cover. Universal brackets sold separately. Fender mounting kit is part number 6A216. Axle Mounting Kit is part number 6A217. Measures about 48 inch spread from Mounting brackets (40 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100B)
$192.01

John Deere AR Deluxe Tractor Umbrella
Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

John Deere AR HAND CLEANER GALLON
HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

PTO / Driveline
John Deere AR Driveline Assembly
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

John Deere AR Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

John Deere AR Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

John Deere AR PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
John Deere AR 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

No
Picture
Acrylic Hardener, 16oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

No
Picture
Acrylic Hardener, 8oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$19.46

No
Picture
Alumimum Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$34.83

No
Picture
Black Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

No
Picture
Paint, Aluminum, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

No
Picture
Paint, Aluminum, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

No
Picture
Paint, Aluminum, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

No
Picture
Paint, Clear Coat, 1 Gallon
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

No
Picture
Paint, Clear Coat, 1 Quart
- High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

No
Picture
Paint, Clear Coat, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

No
Picture
Paint, Gloss Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

No
Picture
Paint, Gray Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

No
Picture
Paint, Gray Primer, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

No
Picture
Paint, Gray Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)
$44.19

No
Picture
Paint, Green, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210GAL)
$49.10

No
Picture
Paint, Green, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210QT)
$20.72

No
Picture
Paint, Green, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210SP)
$58.95

No
Picture
Paint, Industrial Yellow, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530GAL)
$69.35

No
Picture
Paint, Industrial Yellow, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530QT)
$31.49

No
Picture
Paint, Industrial Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530SP)
$58.95

No
Picture
Paint, JD Yellow, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190GAL)
$44.00

No
Picture
Paint, JD Yellow, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190QT)
$17.55

No
Picture
Paint, JD Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190SP)
$44.19

No
Picture
Paint, Red Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

No
Picture
Paint, Satin Black, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

No
Picture
Paint, Satin Black, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

No
Picture
Paint, Satin Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

No
Picture
Paint, Yellow Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

No
Picture
Slip Resistant Coating
- Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$29.64

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)
$99.22

John Deere AR Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

John Deere AR Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Seats
John Deere AR Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V)
$1518.86

John Deere AR Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

No
Picture
Seat, Industrial
- Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

John Deere AR Seat, Universal
Seat, Universal
- BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $30 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1060ATSP)
$80.04

John Deere AR Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

John Deere AR Seat, Universal
Seat, Universal
- Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BK)
$146.35

No
Picture
Seat, Universal
- Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

No
Picture
Seat, Universal
- Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

John Deere AR Tie-On Seat Cover
Tie-On Seat Cover
- Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602)
$37.80

John Deere AR Tie-On Seat Cover
Tie-On Seat Cover
- Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014)
$37.80

John Deere AR Tie-On Seat Cover
Tie-On Seat Cover
- Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00

John Deere AR Universal Seat
Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

John Deere AR Universal Seat
Universal Seat
- Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

John Deere AR Universal Seat
Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Sheet Metal / Body Parts
John Deere AR 2 Hour DVD - The How To of Sheetmetal Repair
2 Hour DVD - The How To of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

John Deere AR Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

John Deere AR Fender Hand Grip
Fender Hand Grip
- Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: R20759)
$7.13

John Deere AR Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

John Deere AR SAFETY STEP KIT
SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

John Deere AR Toolbox, RED
Toolbox, RED
- This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

Steering
John Deere AR Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

John Deere AR Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Part No: AE33538A)
$11.19

John Deere AR Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$44.46

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

John Deere AR Chain Binder
Chain Binder
- 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

John Deere AR Chain Binder
Chain Binder
- 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

John Deere AR Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

John Deere AR Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

John Deere AR Digital Calipers, Stainless
Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$33.05

John Deere AR Grease Gun
Grease Gun
- Grease Gun. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

John Deere AR Grease Gun
Grease Gun
- Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

John Deere AR Grease Gun
Grease Gun
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

John Deere AR Grease Gun CLAMP
Grease Gun CLAMP
- Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

John Deere AR Grease Gun PowerLuber 14.4V BATTERY
Grease Gun PowerLuber 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19

John Deere AR Grease Gun PowerLuber 14.4V with CASE 1 BAT
Grease Gun PowerLuber 14.4V with CASE 1 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, 14.4 volt NI-CAD rechargeable battery, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1442B)
$288.95

John Deere AR Grease Gun PowerLuber 14.4V with CASE 2 BAT
Grease Gun PowerLuber 14.4V with CASE 2 BAT
- Grease gun 14.4 Volt PowerLuber. Professional two-speed cordless rechargeable grease gun. Complete with 110-volt fast charger, (2) 14.4 volt NI-CAD rechargeable batteries, 30 inch flex hose with spring guard and custom carrying case to hold two rechargeable batteries. (Part No: GGPL1444B)
$403.25

John Deere AR Grease Hose 12 Inch
Grease Hose 12 Inch
- 12 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G115)
$11.62

John Deere AR Grease Hose 18 Inch
Grease Hose 18 Inch
- 18 inch flexible grease gun hose. Price shown is for each, sold only in multiples of 2 items. (Part No: G118)
$10.59

No
Picture
Hay Moisture Tester
- Self Calibrating Electronic Moisture Tester. (Part No: S.58474)
$267.39

John Deere AR Winch Remote, Wireless
Winch Remote, Wireless
- Used with winch sets 3013-0002 and 3013-0001. (Part No: 3013-0003)
$22.48

John Deere AR Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0002)
$110.33

John Deere AR Winch Set, 2500 Lb
Winch Set, 2500 Lb
- Universal 12 volt with Hand held remote. (Part No: 3013-0004)
$110.33

John Deere AR Winch Set, 3500 Lb
Winch Set, 3500 Lb
- Universal 12 volt with Push button switch. Wireless remote available as p/n 3013-0003. (Part No: 3013-0001)
$124.13

Tractor Manual Search - Yesterday's Tractor Co.

Wheels
John Deere AR Front Rim
Front Rim
- This is a 6 inches x 16 inches Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Replaces: JD1293, JD3039 (Part No: FW60166)
$87.64

John Deere AR Front Rim
Front Rim
- This is a 5.5 inch x 16 inch Front Wheel Rim. It has a pilot hole of 4.625 inches. It uses 6 bolts in a 6 inch bolt pattern. Back-spacing is 4.75 inches. Capacity of 3500 lbs based on 20 MPH max speed. Verify size of old rim before ordering. Add $25 additional shipping per rim due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: FW55166)
$65.55

John Deere AR Rear Rim Carriage Head Bolt and Nut
Rear Rim Carriage Head Bolt and Nut
- 2.5 length, 5/8 diameter FF Carriage Head Bolt with 1/2 inch nut. (Part No: HB250)
$3.75

John Deere AR Stop Body
Stop Body
- Fits various tractors models with power adjust rims. Replaces part number M2334T. (Part No: C0NN1057A)
$15.24

John Deere AR TIRE GAUGE
TIRE GAUGE
- Gauge has special oiling and pump-out feature to clean out anti-freeze. Calibrated 4-50 pounds. (Part No: T9350)
$11.79

John Deere AR TIRE GAUGE DIAL
TIRE GAUGE DIAL
- Precision Bourdon Tube (non-plunger), dial style tire gauge: 60 pound. Reading in 1 pound calibrations. Individual "see-thru" vinyl permanent container pouch. Not for use with liquid-filled tires. (Part No: T600XG)
$13.07

John Deere AR Tire Bead Buster
Tire Bead Buster
- Handy for breaking the bead when removing tires. No electricity, pneumatics or hydraulics needed. (Part No: S.29300)
$429.75

No
Picture
Tire Gauge, Heavy Duty
- Accugage measures up to 60 lbs. Comes with braded flexible hose, bleed valve, unbreakable crystal and rubber boot. Brass geared movement. Bourdon tube design (not plunger type). (Part No: B1SB6599)
$40.14

John Deere AR Tire Inner Tube
Tire Inner Tube
- This Inner Tube fits 4.00 x 15, 5.00 x 15, 5.90 x 15, 4.50 x 16 and 5.00 x 16 tires. It has a TR-15 valve stem. Valve height 1.38 inch, diameter 0.65 inch. (Part No: 500X15TB)
$19.04

John Deere AR Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

John Deere AR Tire Tube
Tire Tube
- For 5.50 inch, 6.00 inch, or 6.50 inch X 16 inch tires. This is a bias style tube, not for radial tires. Not for recreational use. (Part No: WHS050)
$17.58

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 7.5 x 24, 8.3 x 24, and 9.5 x 24. (Part No: WHS060)
$42.21

No
Picture
Tire Tube 24 Inch
- This 24 inch tire tube is used for all tractors with the following tires: 10.00 x 24, 11.00 x 24, 11.2 x 24, and 12.4 x 24. (Part No: WHS059)
$51.89

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 10.00 inch x 28 inch, 11.00 inch x 28 inch, 11.2 inch x 28 inch and 12.4 inch x 28 inch. (Part No: WHS058)
$44.71

No
Picture
Tire Tube 28 Inch
- This tire tube is used for all tractors with the following tires: 12.00 x 28, 13.00 x 28, 13.6 x 28, and 14.9 x 28. (Part No: WHS061)
$60.00

No
Picture
Tire Tube 32 Inch
- This 32 inch tire tube is used for all tractors with the following tires: 7.00 inch x 32 inch, 8.00 inch x 32 inch, 9.00 inch x 32 inch and 9.5 inch x 32 inch. (Part No: WHS062)
$48.74

No
Picture
Tire Tube 38 Inch
- This 38 inch tire tube is used for all tractors with the following tires: 10.00 inch x 38 inch, 11.00 inch x 38 inch, 11.2 inch x 38 inch and 12.4 inch x 38 inch. This is a bias style tube. Not for use with radial tires. (Part No: WHS064)
$53.48

No
Picture
Tire and Tube
- This 4.00 inch x 12 inch 3 rib tire comes with a tube and fit various tractor models. (Part No: 400x12-3)
$55.57

John Deere AR Tire, Three Rib
Tire, Three Rib
- Front tire, 3 Rib, 5.50 inch x 16 inch. Designed to be used with tube (part number WHS050). 6 Ply.Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 550X16)
$95.15

John Deere AR Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 6.50 inches x 16 inches. Designed to be used with tube (part number WHS050). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 650X16)
$89.70

John Deere AR Tire, Three Rib
Tire, Three Rib
- Front Tire, 3 Rib, 5.00 inches x 15 inches. Designed to be used with tube (part number 500X15TB). 6 Ply. Additional $20 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 500X15)
$62.10

CategoriesAll AR Parts
Manuals
If you will be servicing or maintaining your tractor, we highly recommend that you have a manual to refer to. We searched the tractor manual database and found the following items. They may or may not apply to your tractor, please read the descriptions carefully. Our search engine isn't perfect... yet!
John Deere Model AR Manuals
AR Unstyled (SN# 250000-271999) Operators Manual 68 Pages (Part No: JD-O-OMR2003) $29.95

AR Styled - Works for Serial #'s 272000 and UP - Operators Manual 72 Pages (Part No: JD-O-OMR2004) $24.95

AR Styled - Works for Serial #'s 272000 and UP Parts Manual 170 Pages (Part No: JD-P-PC675) $32.95

Miscellaneous Related Items
Misc Repair DVD
John Deere AR John Deere POWER-TROL Repair - Misc Repair DVD
John Deere POWER-TROL Repair
- In-depth information on reparing the John Deere Power Trol. (Part No: JDV-01850)
$24.00

JD Repair DVD
John Deere AR How to Rebuild Duplex Carburetors - JD Repair DVD
How to Rebuild Duplex Carburetors
- Does your John Deere tractor pull but will not idle? Starts hard and runs only by working the choke? Runs for short periods and then quits? This professionally produced DVD will help you trouble shoot these problems and go through a complete overhaul of the Duplex carburetor. It is designed for the home mechanic with a basic tool box. 111 minutes. (Part No: RCR01-DVD)
$24.00

John Deere AR How to Rebuild DLTX Series Carburetors - JD Repair DVD
How to Rebuild DLTX Series Carburetors
- This DVD shows simulated running problems. You will be able to hear what problems sound like so you can identify them. It will also show how to fix plugged idle passages, what to look for when your carburetor won't idle right, how to clean, and why you need to heat brass parts before removing them. 111 minutes. (Part No: RCR03-DVD)
$24.00

John Deere AR How to Rebuild Wico Series Magnetos - JD Repair DVD
How to Rebuild Wico Series Magnetos
- A step by step DVD on the operation, repairing, and timing of the magnetos. This DVD will show basic principles of electricity and troubleshooting problems. And then it's back to the tractor for reinstallation and timing. 103 minutes. (Part No: RCR04-DVD)
$24.00

John Deere AR How to Rebuild Two-Cylinder Governors - JD Repair DVD
How to Rebuild Two-Cylinder Governors
- This DVD shows how to rebuild governors used on John Deere tractors. You will see how to rebuild worn parts that are too expensive to replace. We will go to the machine shop and follow the machinist through the disassembly and reassembly of the gears. 121 minutes. (Part No: RCR05-DVD)
$24.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

[Categories]   [All John Deere Models]   [Print]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy