Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 4640 Parts

[ Turn Off Pictures ]

[Categories]   [All John Deere Models]   [Print]  


Brakes
John Deere 4640 Brake Pad
Brake Pad
- 3" x 7", pads have steel center plate, sold individually. For tractor models 4010, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 8430, 8440, 8450, 8630, 8640, 8650, 8850. (Part No: R110464)
$14.57

John Deere 4640 Brake Pad, Disc\Rotor Type Brakes
Brake Pad, Disc/Rotor Type Brakes
- For tractor models 4010, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8630, 8640, 8650, 8850. 3" x 7" Pad. Friction Material only, does not include backing plate or rivets. Sold in lots of 3, price per pad. (Part No: AR28488)
$21.75

No
Picture
Brake Plate
- 17 Diameter - 14 Teeth Use with Brake Shaft R57614 and R63911 For 4520, 4620, 4630, 4640, 4650, 4840, 4850, 7020, 7520, 8440, 8630, 8640, 8650 (Part No: R3078)
$74.42

John Deere 4640 Planetary Brake Kit
Planetary Brake Kit
- Kit includes 14 friction discs, 14 separator plates, and 10 seals. For model 4640 SN# 012830 and below with R60365 31/32" planetary brake backing plate. (Part No: PBK620)
$1274.95

John Deere 4640 Planetary Brake Kit
Planetary Brake Kit
- Kit includes 16 friction discs, 16 separator plates, and 10 seals. For model 4640 SN# 012831 and up with R43139 3/8" backing plate. (Part No: PBK640)
$1483.67

Clutch
John Deere 4640 Clutch Disc
Clutch Disc
- Transmission or PTO clutch, 48 internal splines, 12" O.D., 7.010" I.D. For tractor models 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8630, 8640, 8650, 8850. OEM number RE60082, AR60082 (Part No: RE234264)
$55.52

John Deere 4640 Clutch Pressure Plate
Clutch Pressure Plate
- Used in torsional damper (Power Shift). 9.630" I.D., .375" thick, 3 tang. For tractor models 4040, (4230 from SN# 016359), 4240, 4240 Euro edition, (4430 from SN# 022373), 4440, 4440 Euro edition, (4630 from SN# 008455), 4640, 4840. Replaces R56720. (Part No: R76731)
$140.30

John Deere 4640 Pilot Bearing
Pilot Bearing
- .6693" I.D. For tractor models 2840, (3010 synchro range), (3020 power shift & synchro range), (320 SN# 321209 and up), (3300 early), 40, (4000 power shift SN# 201000 and up), (4000, 4010 synchro range), 4020, 40C, (4230, 4240 power shift), 430, 4320, 435, 440, (4430 power shift SN# 022373 and up), 45, 4520, 4620, (4630, 4640, 4840 power shift), 5200, 5300, 5400, 55 single, 5500, (7020 synchro range), 830, 95, M, MT. Replaces CH12908, JD8504, JD8511, JD9281, JD9449 (Part No: C5NN7600A)
$3.08

Cooling System
John Deere 4640 Air Conditioning Receiver Dryer
Air Conditioning Receiver Dryer
- 4" x 7-1/2" overall, inlet & outlet#6 female o-ring with sight glass. R12 & R134A compatible. Models:1640, 2040, 2140, 2350, 2550, 2750, 2950, 2940, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810, 8430, 8440, 8450, 8630, 8640, 8650, 8850, 9100, 9120, 9200, 9220, 9300, 9300T, 9320, 9320T, 9400, 9400T, 9420, 9420T, 9520, 9520T, 9620, 9620T. (Part No: RE49169)
$35.74

No
Picture
Block Heater Engine
- Engine coolant heater 12 cord. 1000 watt, 120 volt. Fits 2 diameter smooth bore core hole. For 400 and 500 series engines including: 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 7020, 7520, 8430, 8440, 8630, For 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6620, 7020, 7520, 7700, 7720, 8430, 8440, 8630, 8640, 8820 (Part No: TP-AR50518)
$66.10

No
Picture
Evaporator
- For 4030, 4040, 4050, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430 with SN# above 075971, 8440, 8450, 8630 with SN# above 075978, 8640, 8650, 8850. Evaporator 29" Long, 5" Wide. REPLACES RE52265 (Part No: AR88076)
$247.61

No
Picture
Oil Cooler Bypass Tube
- This Oil Cooler Bypass Tube measures 10.69 inches long, 1.125 inside diameter and 1.250 outside diameter. For models 4040 early, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5200, 5400, 7020, 8430, 8440, 8450, 8560. Verify measurements to ensure you are ordering the correct tube. (Part No: R50386)
$38.34

John Deere 4640 Radiator
Radiator
- For model 4640. Radiator replaces AR79456, AR90741.** THIS ITEM IS SHIPPED TRUCK FREIGHT ONLY. PLEASE CALL 1-800-853-2651 FOR SHIPPING QUOTE BEFORE ORDERING.** (Part No: RE21896)
$862.86

John Deere 4640 Radiator Hose Lower
Radiator Hose Lower
- New lower radiator hose with an inside diameter of 2" on the smaller side and 2.312" on the larger side. This radiator hose fits the John Deere Tractor 4040 (with air conditioning) or 4230 (diesel with air conditioning). For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: R53142)
$14.96

John Deere 4640 Radiator Hose, Lower
Radiator Hose, Lower
- For tractor models 4640, 4840, 9940. (Part No: R62327)
$21.34

John Deere 4640 Radiator Hose, Upper
Radiator Hose, Upper
- 2.250" I.D on one end and 2.500" I.D on the other. For tractor models 4640, (4650 SN# 324214 and below), 4840, (4850 SN# 322745 and below), 9940, 9950. (Part No: R79346)
$12.10

John Deere 4640 Water Pump
Water Pump
- For tractor models 4240, 4350, 4440, 4455, 5720, 5730, 8430, 9940, (4640, 4840, 8440 all IF USED WITH ORIGINAL PULLEY). Water Pump replaces Casting numbers: R61439, RE10969, RE10970, R61437, AR98551, RE11496, RE11498, AR74498, AR84165, R98552. This Water Pump Weighs 40 lbs. Includes Gasket. Additional 10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED (Part No: RE20022)
$179.33

No
Picture
Water Pump - New
- With Hub - Less Pulley For 4240, 4350, 4440, 4455, 4640, 4840, 8430, 8440, with Diesel Engine. OEM# R61439 (Part No: WP1486)
$196.90

John Deere 4640 Water Pump Seal Kit
Water Pump Seal Kit
- This seal kit is used on multiple John Deere Tractors where water pumps with casting # R70437, R100812 or R78286 is used. Plastic installer included. For tractor models 3300, 3430, 4020, 4030, 4040, 4230, 4240, 4320, 4350, 4400, 4430, 4440, 4455, 4520, 4620, 4630, 4640, 4840, 5103, 5105, 5200, 5203, 5205, 5210, 5303, 5310, 5310N, 5320, 5320N, 5400, 5403, 5410, 5420N, 5440, 5460, 5510, 5510N, 5520, 5520N, 5720, 6100, 6500, 6600, 7020, 7445, 7450, 8430, 8440, 8640 and 9400. (Part No: AR101549)
$7.28

Decals and Emblems
No
Picture
Decal Set
- Hood only decal set for Early model 4640. The Early model has solid yellow stripes. (Part No: R4715)
$43.94

No
Picture
Decal Set
- Hood only set for Late 4640. The Late has "Tiger Paw" striping. (Part No: R3792)
$43.17

John Deere 4640 Hood Ornament
Hood Ornament
- For tractor models (2040 SN# 350000 and up), 2150, 2155, 2255, 2350, 2355, (2440, 2640 SN# 341000 and up), 2550, 2555, 2750, 2755, 2855, 2940, 2950, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4550, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850. Replaces R50736, L40919. (Part No: R73259)
$33.75

Electrical System
John Deere 4640 Alternator
Alternator
- 12 volt, 90 amp. For tractor models (7445 1987-94 with 359 dsl), (5720 1982-86 with 466 dsl), (5730 1986-92 with 466 dsl or 619 dsl), (5820 1982-86 with 619 dsl), (5830 1986-92 with 466 dsl), (583 1986-92 with 619 dsl), (4040 1981-82 with 404 dsl), (4050 1983-88 with 359/466 dsl), (4240 1981-82 with 466 dsl), (4250 1983-88 with 466 dsl), 4350, (4440 1981-82 with 466 Turbo dsl), (4450 1983-90 with 466 dsl), (4640 1981-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (8440 1979-82 with 466 dsl), (8630 1978-80 with 619 dsl), (8640 1979-82 with 619 dsl). Replaces 100211-0290, 100211-0290, AR87205, AR93448, AT103789, SE501363, TY26050, TY6621. (Part No: AND0002)
$118.61

John Deere 4640 Alternator
Alternator
- 12 volt, 72 amp. For tractor models (5200 1974-77 with 404 dsl), (5400 1974-77 with 531 dsl), 5420, (5440 1977-82 with 404 dsl), (5460 1977-82 531 dsl), (5720 1982-86 with 466 dsl), (5820 1982-86 with 619 dsl), (4020 1971-72 with 360 gas or 404 dsl), (4030 1977-78 with 329 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4230 1977-78 with 404 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4320 1969-73 with 404 dsl), (4430 1977-78 with 404 dsl), (4440 1978-82 with 466 Turbo Dsl), (4450 1983-90 with 466 dsl), (4620 1969-73 with 404 dsl), (4630 1977-78 with 404 dsl), (4640 1978-82 with 466 dsl), (4650 1983-88 with 466 dsl), (4840 1979-82 with 466 dsl), (4850 1983-88 with 466 dsl), (6030 1970-77 with 531 dsl), (7520 1971-75 with 531 dsl), (8630 1975-78 with 619 dsl). replaces 1100490, 1102932, 1100287, 11013128, 1102926, 1105174, SE501382, TY6600, TY6772. Comes with single groove pulley. If you need a double groove, reuse your old one or order R81507 (Part No: ADR0133)
$71.69

John Deere 4640 Alternator, New
Alternator, New
- 12 volt, 78 amp. For tractor models (4000, 4020 SN# 263481 and up with air), 4030, 4230, 4240, 4430, 4440, 4630, 4640, 4840, (4040 with out cab), (4050, 4250, 4450, 4650, 4850 with roll guard), (4620 SN# 014118 and up), (6030 with air), (7020 SN# 002264 and up), (8430 up to SN# 006278), (8630 up to SN# 008619). Replaces 8134664, 8982775005, JR775005, 10463060, 10463397, 10495429, 10497077, 1100257, 1101244, 1101298, 1100241, 1100246, 1100269, 10497074, 1101308, 1101241, 1101299, 1100237, 1100259, 1100270, 1100287, 1105047, 1105048, 1105049, 1101242, 1101245, 1101279, 1105427, 1105492, 1105495, 1105604, 1105606, 1105634, 1105648, 1105650, 1105673, 1105692, 1105426, 1105496, 1105632, 1105651, 1105425, 1105494, 1105620, 1105628, 1105629, 1105706 (Part No: TY6686)
$71.69

John Deere 4640 Battery Cover
Battery Cover
- Left Hand with Step For 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955. OEM# AR65025 (Part No: R3891)
$72.08

John Deere 4640 Pulley
Pulley
- This is a two groove pulley used on multiple John Deere models. For 13mm (0.50 Inch) Belts. 81Mm (3.20 Inch) Outside Diameter, 17mm (0.669 Inch) Inside Diameter. Used on Alternators: A-890, 13143, 021000-7420, 100211-0080, 100211-0081, 100211-0290, 100211-0291, 100211-0292, 100211-0790, 290-402. It replaces John Deere Part Numbers R81507, R52161. Replaces Delco part numbers 7940-1107, 1149-P, 8126450, 115-030, 191002, 1B-5011, 379401107, 22025011 (Part No: R81507)
$5.93

John Deere 4640 Starter
Starter
- 12 volt, 10 tooth, clockwise rotation. For tractor models 1085, (2056, 2058, 2064, 2066 1993 & up), (6600, 6602, 7700 79-82 with 404 dsl), (6620 1979-88 with 466 dsl), (6622 1980-85 with 466 dsl), (7720 79-89 with 466 dsl), (8820 1980-92 with 466 dsl), (9500, 9600 1989-93 with 466 dsl), (9940 1983-86 with 466 dsl), (9950 1987-90 with 466 dsl), (9960 1987-93 with 466 dsl), (9965 from 1993 & up), 544, (5200 1974-77 with 404 dsl), 5420, (5440 1977-82 with 404 dsl), (5720 1982-86 with 466 dsl), (5730, 5830 1986-92 with 466 dsl), (4040 1978-82 with 404 dsl), (4050 1983-88 with 466 dsl), (4055 1989-92 with 466 dsl), (4240 1978-82 with 466 dsl), (4250 1983-88 with 466 dsl), (4255 1989-92 with 466 dsl), 4350, (4440 1978-82 with 466 dsl), (4450 1983-90 with 466 dsl), (4455 1989-92 with 466 dsl and all made in Mexico), (4555 1989-92 with 466 dsl), (4560 1992-94 with 466 dsl), (4640 1978-82 with 466 dsl). Replaces 028000-3292, 228000-4601, 128000-5972, 028000-3290, 128000-0770. (Part No: SND0238)
$275.93

John Deere 4640 Starter
Starter
- This is a 12 volt starter, clockwise rotation, 10 tooth drive, DD Delco 35MT Type. Rotatable DE housing. Note, check clearance on some JD models, may have interference issues on starter motor height when models have drop type manifold is used. For models 3010, 3020, 4010, 4020, 4030, 4040, 4040S, 4050, 4230, 4240, 4240S, 4250, 4320 Compact Tractor, 4430, 4440, 444C Indust/Const, 444D Indust/Const, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 500A Indust/Const, 500C Indust/Const, 5400, 544C Indust/Const, 544E Indust/Const, 544G Indust/Const, 570 Grader, 570A Grader, 5720 Forage Harvester, 5820 Forage Harvester, 624E Indust/Const, 643D Feller Buncher, 644C Indust/Const, 644D Indust/Const, 646C Compactor, 690 Excavator, 690A Excavator, 690B Excavator, 693B Feller Buncher, 7020, 740A Skidder, 8430, 8440, 8450, 8640, 8650. Also replaces SE501446. (Part No: SE501444)
$213.90

John Deere 4640 Starter Drive
Starter Drive
- Starter drive for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54992)
$68.64

John Deere 4640 Starter Solenoid
Starter Solenoid
- Solenoid for Nippondenso Starters. Starter AR77254 Nippondenso #028000-3290, AR77254 Nippondenso #028000-3291, RE41875 Nippondenso #028000-3292, RE13722 Nippondenso #028000-3292. For combine: 9600 to engine SN# 136850. For 3020, 4000, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 6600, 6602, 6620, 6622, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8820, 9500, 9600 (Part No: TP-AR54991)
$62.13

John Deere 4640 Switch, Dimmer
Switch, Dimmer
- Dimmer switch, for tractors: 2520 SN# 022001 and up, 3020 SN# 123000 and up, 4000, 4020 SN# 250001 and up, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020 SN# 030001 and u For 4030, 4230, 4430, 4630 (Part No: AR48725)
$25.15

John Deere 4640 Switch, Push Button
Switch, Push Button
- This 2 Terminal Switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch over all length. Check measurements before ordering if using as a universal part. Applications include Ether Switch, Horn Button, Cold Start, Starter Switch and Manifold Heater Switch. Replaces: AR46184, AR47373, AR47374, R39554, R39554. (Part No: R7994)
$11.25

John Deere 4640 Voltage Regulator
Voltage Regulator
- Internal voltage regulator, for alternators. For tractor models 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4620, 4630, 4640, 4650, 4840, 4850, 6030, 7020, 7520, 8430, 8630. OEM alternators: AR54793, AR54796, AR56728, AR84306, AR93445, AR93446. (Part No: AR55827)
$7.16

Engine Bearings
No
Picture
Bearing Cup
- Inner bearing cup. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. (Part No: 453X)
$14.84

John Deere 4640 Cam Bearing Set
Cam Bearing Set
- For tractor models 4000, 4010, 4020, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: CBK-D446)
$38.88

No
Picture
Main Bearing Set
- MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437)
$201.44

No
Picture
Main Bearing Set
- MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-010)
$201.44

No
Picture
Main Bearing Set
- MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-020)
$201.44

No
Picture
Main Bearing Set
- MAIN Bearing SET For 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450 (Part No: MBK1437-030)
$201.44

No
Picture
Main Bearing Set
- Available in STD, .010, .020, .030 For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine. Specify size in Comments box when ordering. (Part No: R-AR74814S6)
$167.11

No
Picture
Main Bearing, .010
- For tractor models (4630 SN# 335845 and up with 6.404T/A 6 cyl eng.), (4640 with 6.466T & with 6.466A with SN# 233592 and below & 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below & 6.466A SN# 317858 and below 6 cyl eng.), ((4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T/A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng.) (Part No: AR74816)
$22.50

No
Picture
Main Bearing, Std
- Single bearing. For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR74814)
$23.62

No
Picture
Rod Bearing, .010
- For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: TP-AR73279)
$19.46

No
Picture
Rod Bearing, .020
- For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: TP-AR73280)
$19.46

No
Picture
Rod Bearing, STD
- Single Bearing. For tractor models (4055, 4255, 4455, 4555, 4560, 7700, 770BH, 772B, 772BH, 7800, 792D, 792LC, 8100, 8300, 850C, 892E, 892LC, 9500, 9600, 9960, 9965 with 6.076H above SN# 500000, 6.076T, 6.076A 6 cyl engine), (4250, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & with 6.466A SN# 317859 and up), 5720, (4440, 4640, 6620, 6622, 7720 with 6.466T all & 6.466A up to SN# 233592 and above 317859), (4755, 4760, 644E, 644ER, 740E, 740G, 748E, 748G with 6.076H, 6.076T or 6.076H eng.), (4840, 5730, 644C, 690C, 762A, 762B, 770A, 770B, 790D, 8430, 8440 with 6.466T up to SN# 253372 & 6.466A up to SN# 317858). (Part No: AR73277)
$31.48

No
Picture
Rod Bearing, Std
- For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: AR73277)
$31.48

No
Picture
Thrust Bearing Set, .010
- For tractor models (4630 SN# 335845 and up with 6.404T/A 6 cyl eng.), (4640 with 6.466T & with 6.466A with SN# 233592 and below & 317859 and up 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4760 with 6.076H, 6.076T, 6.076A 6 cyl eng.), (4840 with 6.466T SN# 253372 an below & 6.466A SN# 317858 and below 6 cyl eng.), ((4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955, 4960 SN# 499999 and below with 6.076T, 6.076A, 6.076H 6 cyl eng.), (500A, 500B, 500C, 510 SN# 280000 and up with 4.270 4 cyl eng.), (5440 with 6.404T/A 6 cyl eng.), (5460 with 6.466T SN# 253373 and up & 6.466A SN# 317859 and up 6 cyl eng. (Part No: AR77750)
$48.93

No
Picture
Thrust Bearing Set, Standard
- For tractor models (3020 SN# above 280000 with 4.270 4 cyl), (4000 SN# 215000-335845 with 6.404D 6 cyl), (4010, 4020, up to SN# 214999 with 6.404D), (4040, 4050, 4230, 4240, 4430, 4630, 6600, 690B, 693C, 740, 7700 with s/ 335846 and up), (4250, 4440, 4450, 4650, 5460, 6602 with 6.466T SN# above 253373 & 6.466A SN# above 317859), 4320, (4520, 4620, 644, 644A, 646, 646B, 690, 690A with 6.404T/A up to SN# 335845), (4640 with 6.466T with 6.466A SN# up to 233592 and above SN# 317859), (4850, with 6.466A SN# 233593-317858), (500A, 500B, 500C, 510 with 4.270 SN# above 280000), (5440 with 6.404T/A), (5720 with 6.466T, 6.466A), (5730, 644C, 690C, 762A, 762B, 770A, 770B with 6.466T SN# above 253373 and 6.466A above SN# 233593 or with 6.466D), (600 up to SN# 335845), 6620, (644D with 6.466D), (6622 6622 with 6.466T all or SN# 6.466A up to SN# 233592 and above 317859), (740A with 6.466D all or SN# 233593-317858 with 6.466A). (Part No: AR77748)
$36.52

Engine Gaskets
No
Picture
Complete Gasket Set without Seals
- For tractor models (4250, 4450, 4650, 5460, 6602, 762B, 770A, 790D with 6.466T SN# above 253373 & 6.466A above SN# 317859 6 cyl.), (4440, 4640, 6620, 6622 with 6.466T & (6.466A SN# up to 233592 and above SN# 317859), (4840, 5730, 644C, 690C, 7720, 8430, 8440, 8450, 8820 with 6.466T SN# up to 253372 & 6.466A up to SN# 317858), (4850 6.466A SN# 233593-317858), (5720, 9940 with 6.466T or 6.466A), (644D, 646A with 6.466D 6 cyl), (740A with 6.466D all with 6.466A SN# 233593-317858), (762A with 6.466D all with 6.466T SN# above 253373 with 6.466A SN# above 233593), (850B, 892D, 9950 with 6.466T above SN# 253373 & 6.466A SN# above 233593) (Part No: AR98845)
$226.60

No
Picture
Crankshaft Seal, Front
- For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). (Part No: AR49025)
$21.23

John Deere 4640 Crankshaft Seal, Rear
Crankshaft Seal, Rear
- For tractor models (3010, 3030 up to SN# 280000 with 4.270 eng.), 3020, 4000, (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Replaces RE520036, RE17352, RE22764, AR63095, RE14953, ``RE504363, RE530121 (Part No: RE22764)
$38.55

No
Picture
Front Crank Seal
- For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-AR49025)
$22.13

No
Picture
Gasket Set
- For tractor models 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. (Part No: FS3898)
$476.02

No
Picture
Head Gasket Set
- For 4250, 4440, 4450, 4640, 4650, 4840, 4850 with 466T, A Diesel Engine (Part No: R-AR98851)
$121.05

John Deere 4640 Oil Pan Gasket
Oil Pan Gasket
- Oil pan gasket. 1 set used in 301 CID 6 cylinder gas engine (not for block numbers R40940, R49550); 1 used in 340 CID 6 cylinder gas engine (block numbers R33170, R43330, R40860, R40870 only, to SN# 200999); 1 used in 381 CID 6 cylinder diesel engine; 1 used in 404 CID & 466 CID 6 cylinder diesel engines (turbocharged & naturally aspirated).For tractor models 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R71918)
$13.49

No
Picture
Oil Seal
- Seal. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: TP-AR27806)
$18.93

No
Picture
Oil Seal Retainer
- Retainer. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: TP-R28574)
$28.50

No
Picture
Rear Crank Seal
- For tractor models 3010, 3020, 4000, 4010, 4020, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-RE17352)
$44.91

No
Picture
Upper Gasket
- UPPER GASKET For 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450 (Part No: HS3898)
$132.12

Engine Rebuild Kits
No
Picture
Basic In-Frame Overhaul Kit
- BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: BIFD4460)
$1405.74

John Deere 4640 Basic In-Frame Overhaul Kit
Basic In-Frame Overhaul Kit
- BASIC In-Frame Overhaul KIT 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, connecting rod bolts, valve-grind gasket set, oil pan gasket set. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Part No: BIFD6466)
$1237.67

No
Picture
Basic Overhaul Kit
- BASIC Overhaul Kit. 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: BEKD4460-LCB)
$1793.71

No
Picture
Basic Overhaul Kit
- BASIC Overhaul Kit 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R71074. Basic Engine Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals. For 4640 Series, 4440 Series, 4250 Series, 4450 Series, 4650 Series, 6620 Series, 7720 Series. (Part No: BEKD6466-LCB)
$1701.93

John Deere 4640 Engine Kit, Less Bearings
Engine Kit, Less Bearings
- Tru Power Engine Kit. 6-Cylinder Turbocharged Diesel, 466 CID. 4.56" Standard Bore. 3-Ring Piston, Keystone Top Compression Ring, Connecting Rod Marked R57303 or R67320. Engine Overhaul Kit, less bearings. Contains sleeves & sleeve seals, pistons & rings, pins & retainers, pin bushings, connecting rod bolts, complete gasket set, crankshaft seals, intake & exhaust valves, springs, guides, retainers. For 8430 Series, 4440 Series, 4640 Series, 8450 Series. (Part No: EOK4460-LCB)
$2088.85

No
Picture
Engine Major Overhaul Kit
- For (4440, 4640, 4840, 5720, 6620, 7720, 8430, 8440, 8450, 8820, 9940, all with 6.466T SN<253372, & 6.466A SN# <233592), (644D, 762A, 740A, 646A, all with 6.466D), all with 400 Series 6 cylinder, C/R R57303, R67320, 4.56" bore, 1.85" pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG18845)
$1898.58

No
Picture
Engine Major Overhaul Kit
- For (4250, 4440, 4450, 4640, 4650, 5460, 5720, 5730, 6602, 6620, 6622, 7720, 9940, 9950, with 6.466T SN# 253373>, & 6.466A SN# 317859>, 6 cylinder), (644C, 690C, 762A, 762B, 770A, 770B, 790D, 892D, 850B, with 6.466T SN# 253373>, & 6.466A SN# 317859>, 6.466A 6 cylinder), all with 400 Series, SBSN 70601>, Conn Rod: R71071, 4.56" bore, 1.85" Pin. Major Overhaul Kit includes: Piston Liner kit, Main Bearings set, Crank Seals, Connecting Rod Bearings/Bushings/Bolts set, Cam Bushing, Gasket Overhaul set. When ordering, specify in comments Main Bearing Size of Standard, .010, .020 or .030, Thrust Bearing Size of Standard, .010, .020 or .030, Thrust Washer Standard or .007, Connecting Rod Bearing Size of Standard, .010, .020, or .030. (Part No: RG18847)
$1739.82

Engine Parts
No
Picture
Camshaft
- For tractor models JD646, JD690, JD690A, JD740, 1177, 1188, 4240, 4240S, 4250, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5200, 5440, 5720, 5730, 5820, 644C, 644D, 6600, 6602, 6620, 6622, 690B, 690C, 690CR, 693B, 693C, 740A, 762, 762A, 770A, 770B, 7700, 772A, 772B, 7720, 790, 790D, 792, 793D, 8430, 8440, 8450, 850B, 8640, 8650, 8820, 892DLC, 985, 9940, 9950. Camshaft replaces AR79610, AR71709, AR74144, AR100384, Casting Numbers R71529, R78316, R77259 (Part No: AR100385)
$371.83

No
Picture
Crankshaft, with Timing Gear
- Marked with casting number R63451, with oil pump gear, with front timing gear, timing gear is installed. For tractor models (4010 gas except with block R40940, R49550, diesel up to SN# 214999 with 6.404D eng), (4020 gas SN# up to 200999 and 6.404D up to SN# 335845), (4040, 4230, 4430, 7700 SN# 335845 and up), (4050, 4240 SN# 335846 and up with 6.466D), (4055, 4255, 4455, 4555, 4560, 7700, 7800, 8100, 8200, 8300, 9500, 9600 SN# 500000 and up with 6.076T, 6.076H, 6.076A eng.), 4755, 4760, (4320, 5440 with 6.404T/A), (4250 SN# 253373 and up with 6.466T & 6.466A SN# 317859 and up), (4440 with 6.466T all & 6.466A SN# up to 233592 and above 317859), (4450, 5460, 7720, 6.466T SN# 253373 and up & 6.466A SN# 317859 and up), (4620 up to SN# 335845), (4630 SN# 335845 and up), (4640, 4840, 5720, 5730, 8430, 8440, 8450, 8820, 9940 with 6.466T SN# 253373 and up & 6.466A SN# 233593 and up), (4850 SN# 233593-317858 with 6.466A). Call for shipping charges - Weight 149 lbs. (Part No: RE53422)
$1985.45

No
Picture
Cylinder Head Overhaul Kit
- Cylinder HEAD Overhaul Kit. For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: VOKD466)
$349.65

John Deere 4640 Lifter, New
Lifter, New
- Cam Followers Fits: 3020 (SN 280000> 4.270), 4000 (SN <215000-335845, 6.404D), (4010 and 4020 (SN <335845 6.404D), 4040 (SN 335845>), 4050 (SN 335846>, 6.466D), 4230 (SN 335845>), 4240 (SN 335846>, 6.466D), 4250 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4320, 4430 (SN 335845>, 6.404T/A), 4440 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4450 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4520 (SN <335845, 6.404T/A), 4620 (SN <335845, 6.404T/A), 4630 (SN 335845>, 6.404T/A), 4640 (All 6.466T SN & 6.466A SN <233592 & 317859> ), 4650 (6.466T W/ SN 253373>, & 6.466A SN 317859>), 4840 (SN 233593-317858, 6.466A), 4840 (6.466T SN <253372, & 6.466A SN <233592), 4850 (SN 233593-317858, 6.466A), 8430 1974-1981 (SN 233593-317858, 6.466A, ), 8430 1974-1981 (6.466T SN <253372), 8440 (SN 233593-317858, 6.466A), 8440 (6.466T SN <253372, & 6.466A SN <233592), 8450 (SN 233593-317858, 6.466A), 8450 (6.466T SN <253372, & 6.466A SN <233592), (500A, 500B, 500C, 510 SN 280000> 4.270) (Part No: R52773)
$11.50

John Deere 4640 Ring Gear
Ring Gear
- For tractor models 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 7020, 7200, 7400, 7600, 7700, 7800, 8100, 8200, 8300, 8400, 8430, 8440, 8450, 8560, 8570. Starter Flywheel Ring Gear for DIESELS. (t) (Part No: TP-R28811)
$70.70

No
Picture
Thrust Washer
- For tractor models (4450 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6cyl eng.), (4455 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4520 SN# 335845 and below 6.404T/A 6cyl eng.), (4555 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4560 SN# 500000 and up 6.076H, 6.076T, 6.076A 6cyl eng.), (4620 SN# 335845 and up 6.404T/A 6 cyl eng.), (4630 SN# 335845 and up 6.404T/A 6 cyl eng.), (4640 6.466T SN# 253372 and below & 6.466A SN# 233592 and below and above SN# 317859 6 cyl eng.), (4650 SN# 253373 and up 6.466T & 6.466A SN# 317859 and up 6 cyl eng.), (4755 6.076H, 6.076A, 6.076T 6 cyl eng.), (4760 6.076A, 6.076H, 6.076T 6 cyl eng.), (4840 6.466T SN# 253372 and below & 6.466A SN# 317858 and below 6 cyl eng.), (4850 SN# 233593-317858 6.466A 6 cyl eng.), (4955 SN# 499999 and below 6.076T, 6.076A, 6.076H 6 cyl eng.), (4960 SN# 499999 and below 6.076H, 6.076A, 6.076T 6 cyl eng.) (Part No: AR77747)
$29.85

John Deere 4640 Valve Stem Cap
Valve Stem Cap
- This Valve Stem Cap is used on Multiple John Deere Models. It replaces original part number T20129. (Part No: T20129)
$3.58

No
Picture
Valve, Exhaust
- For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R50357)
$30.45

No
Picture
Valve, Intake
- For tractor models 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. (Part No: TP-R50358)
$25.72

No
Picture
ValveService Kit
- Cylinder HEAD Service KIT For tractor models 2840, 2940, 2950, 2955, 4000, 4020, 4030, 4040, 4230, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 6620, 7020, 7720, 8430, 8440, 8450. Contains: springs, guides, locks, (no valves). (Part No: VSKD329)
$114.37

Engine Pistons and Sleeves
No
Picture
Piston Kit
- Engine SN# -231856 & Blocks Marked R74352 Keystone Top Compression Ring With Connecting Rod marked R57303, R67320 For 4440, 4640, 4840, 8430, 8440, 8450 (Part No: PK460)
$1081.60

No
Picture
Piston Kit
- Engine SN# 252663- Connecting Rod marked R71074 Keystone Top Compression Ring For 4250, 4440, 4450, 4640, 4650, 6620, 7720 (Part No: PKD6466)
$1382.73

No
Picture
Piston Pin Bushing
- For tractor models 4440, 4640, 4840, 8430, 8440, 8450. For trapezoid shaped bushing, not rectangular. (Part No: TP-R60724)
$21.05

No
Picture
Piston Pin Bushing
- For tractor models 4250, 4440, 4450, 4640, 4650, 6620, 7720. Price shown is for each, sold only in multiples of 6 items. (Part No: TP-R74008)
$27.86

No
Picture
Piston Sleeve
- For tractor models 4050, 4055, 4240, 4250, 4255, 4440, 4450, 4455, 4555, 4560, 4640, 4755, 4760, 4840, 4850, 4955, 4960, 5460, 5720, 5730, 644C, 644D, 644E, 644ER, 646A, 6602, 6620, 6622, 690C, 740A, 740E, 740G, 748E, 748G, 762A, 762B, 7700, 770A, 770B, 770BH, 7800, 790D, 792D, 792LC, 8100, 8300, 8430, 8440, 8450, 850B. All with either 6.466D, 6.076H, 6.076T, 6.076A, 6.466T, or (6.466A up to SN# 233592 and above 317859)engines. (Part No: AR63060)
$55.64

No
Picture
Sleeve Assembly (6 Required)
- 4.563 Bore. For tractor models 4440, 4640, 4840 with 466T, A Diesel Engine - A (To Eng S#233592), T (To Eng S#253372) (Part No: R-AR72079)
$184.28

No
Picture
Sleeve Assembly (6 Required)
- 4.563 Bore For 4250, 4440, 4450, 4640, 4650 with 466T, A Diesel Engine A (From Eng S#317859), T (From Eng S#253373) (Part No: R-AR100646)
$189.24

Exhaust System
No
Picture
Chrome Stack, Curved
- 36", double wall, 3-15/16" inlet I.D.. For tractor models (4050 from SN# 5511 and up), 4055, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4555, 4620, 4630, 4640, 4650, 4755, 4955, 4840, 4850, 7020. (Part No: R4889)
$218.79

John Deere 4640 Exhaust Elbow
Exhaust Elbow
- For tractor models 4040, 4050, 4240, 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850. (Part No: TP-R56994)
$166.62

No
Picture
Exhaust Elbow
- For tractor models 4050, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020. OEM# R56994. (Part No: R0318)
$143.45

John Deere 4640 Manifold
Manifold
- For tractor models JD740, JD743, 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4840, 4850, 6600, 6602, 6620, 6622, 690B, 7020, 7700, 7720, 8430, 8440, 8450, 8560, 8650, 8820, 9940, 9950, 9960, 9965, 9970, 9976, 9986. Exhaust Manifold. Rear Section for Two Piece Exhaust System for 466 Engine. (Part No: R46472)
$150.61

John Deere 4640 Manifold
Manifold
- Front Diesel Exhaust. For tractor models 4050, 4250, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450. Replaces R56995. (Part No: R0313)
$183.71

John Deere 4640 Manifold Gasket Set
Manifold Gasket Set
- For tractor models: (4050 from s/n 6510 and up), 4250, 4320, 4430, 4440, 4450, 4630, 4640, 4650, 4840, 4850, 7020, 8430, 8440, 8450. (Part No: R0313G)
$23.62

No
Picture
Muffler Clamp
- Used with mufflers AR61073, AR86599, RE20224, AR86602, RE20222 and R1679. For tractor models (4050 from SN# 5511 and up), 4055, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4630, 4640, 4555, 4650, (4755, 4955 up to SN# 10000), 4840, 4850. (Part No: RE20223)
$28.78

Fuel System / Air Intake
John Deere 4640 Air Cleaner Dust Collector
Air Cleaner Dust Collector
- This Air Cleaner Dust Collector Valve has a 3 inch inside diameter. It is used on multiple John Deere models. Replaces original part numbers: R45096, T23262, T23263, TT206659. (Part No: T23262)
$2.22

John Deere 4640 Fuel Injection Return
Fuel Injection Return
- "T" Boot fuel injection return. Fits models: 1020, 1120, 2020, 2120, 2510, 3120, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 5200, 5400, 5440, 5460, 6076 Eng. SN# <576895, 6600, 6602, 6619 Eng. SN# <027969, 6620, 690B, 693B, 7440, 7700, 7720, 820, 8430, 8630, 920, 9920, 300, 350, 400, 440, 440A, 440B, 450, 480, 544, 544A, 570, 570A, 740, 743, 762. (Part No: T23425)
$8.81

John Deere 4640 Fuel Pump
Fuel Pump
- For tractor models 4040, 4230, 4240, 4250, 4440, 4450, 4640, 4650, 4840, 4850, 8430, 8440, 8450 all with 404, 466 or, 466T diesel engines. (Part No: AR57264)
$64.22

John Deere 4640 Fuel Shut-Off Valve
Fuel Shut-Off Valve
- This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Part No: R34656)
$12.95

John Deere 4640 Glass Body Fuel Filter
Glass Body Fuel Filter
- Diesel fuel filter element~ see-thru glass body. For most 1971 and up John Deere 4 and 6 cylinder tractors and combines produced in U.S.A. and equipped with Roosa-Master injection systems. Replaces Baldwin BF-909, Wix 33370, and Fram P1130. For 1530, 2040, 2240, 2440, 2630, 2640, 2840, 2940, 3020, 4000, 4030, 4040, 4230, 4240, 4320, 4400, 4420, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5020, 6030, 6600, 6602, 6622, 7020, 7520, 7700, 820, 830, 8430 (Part No: AR50041)
$13.08

John Deere 4640 Turbo to Elbo Adapter
Turbo to Elbo Adapter
- For tractor models 4040, 4040S, 4050, 4240, 4240X, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 550, 555, 644, 644A, 644B, 646, 646B, 6600, 6602, 6620, 6622, 690, 690A, 690B, 7020, 740, 7700, 7720, 8430, 8440, 8820, 9940, 5720. Turbo to Elbo Adapter. (Part No: R43724)
$40.56

), 690C, 690CR, 740, 740A, 762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 792, 850B, 4250, 4350, (4430 Engine S/N 512306>), (4440 Engine S/N <027605 TB4129 Turbo Model), (4450 TB4129 Turbo Model), 4630, (4640 Engine S/N 027605- 282880 TB4129 Turbo Model), (4650 TB4129 Turbo Model), (4840 Engine S/N 027605- 282880 TB4129 Turbo Model), (4850 TB4129 Turbo Model), (7020 Engine S/N 335846>), (8430 Model Year 1974-1981 Engine S/N 027605- 282880 TB4129), (8440 Engine S/N 027605- 282880 TB4129 Turbo Model), (8450 Engine S/N 027605- 282880 TB4129 Turbo Model) Includes Gaskets." />
John Deere 4640 Turbocharger
Turbocharger
- This Turbocharger replaces equipment marked: AR64626, RE16971, AR100241, RE10968, RE16968, RE41920, AR96259, RE16967, RE20167, AR87421 The Oil Inlet Center Is 1/4" Tapered Pipe. 2 Bolt Mount Threads Are M8 Metric Thread. The Oil Drain Threads Are 3/8" Thread. Replaces RE19780, RE19779, AR83439, AR73626, AR101784, RE18989, AR91131. Fits the following when applicable: 644C, 644D, 646C, (690B Engine S/N 512306>), 690C, 690CR, 740, 740A, 762A, 762B, 770A, 770B, 770BH, 772A, 772B, 772BH, 790, 792, 850B, 4250, 4350, (4430 Engine S/N 512306>), (4440 Engine S/N <027605 TB4129 Turbo Model), (4450 TB4129 Turbo Model), 4630, (4640 Engine S/N 027605- 282880 TB4129 Turbo Model), (4650 TB4129 Turbo Model), (4840 Engine S/N 027605- 282880 TB4129 Turbo Model), (4850 TB4129 Turbo Model), (7020 Engine S/N 335846>), (8430 Model Year 1974-1981 Engine S/N 027605- 282880 TB4129), (8440 Engine S/N 027605- 282880 TB4129 Turbo Model), (8450 Engine S/N 027605- 282880 TB4129 Turbo Model) Includes Gaskets. (Part No: RE19778)
$475.44

Hitch / Drawbar
John Deere 4640 Cat III Top Link
Cat III Top Link
- For tractor models 4630, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8650. Assembly consists of the following items: (1) RE44561 , (1) RE44559 , (1) RE50533 & (1) R64084 This part adjusts from 26.50 to 38 inches center to center on the pins. This assembly requires a 1.250 inch pin, not included. Replaces original part numbers AR78229, AR93043 and RE44558 (Part No: R0710)
$241.50

No
Picture
Center Link Assembly
- For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8100, 8200, 8300, 8400, 8440, 8450, 8640, 8650. (Part No: RE44558)
$295.69

No
Picture
Drawbar
- 1.750 Offset 1.750 x 3 x 63.375 1.312 Holes at 1.812 & 4.312. For tractor models 4555, 4560, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960. (Part No: R3101)
$406.65

John Deere 4640 Top Link
Top Link
- Top Link, Category III. For tractor models 4630, 4640, 4650, 4640, 4650, 4840, 4850, 8430, 8440, 8450, 8630, 8640, 8650. For 1530, 2020, 2030, 2240, 2440, 2630, 2640 (Part No: TP-AT34208TL3)
$350.47

Hydraulic System
John Deere 4640 Hydraulic Pump
Hydraulic Pump
- Splined shaft. Old fluid needs to be completely flushed-use clean new fluid. 1 1/16 inch Left inlet, 7/8 inch Top Inlet, 1 1/16 inch Right Inlet, 1 1/16 inch Right Discharge. 29.5 GPM. For tractor models (4000, 4020 SN# 258410 and up), (4320 4 WD SN# 014561 and up), (4520, 4620, 4230, 4430, 4630 4 WD), 8430, 8630, (4040, 4240, 4440, 4640, 4840 4 WD), 8440, 8640, 4650, 4850. Replaces AR94661. (Part No: S.67567)
$959.10

John Deere 4640 Hydraulic Pump Seal & O-Ring Kit
Hydraulic Pump Seal & O-Ring Kit
- 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Part No: RE29107)
$61.89

John Deere 4640 Hydraulic Pump Seal & O-Ring Kit
Hydraulic Pump Seal & O-Ring Kit
- 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: RE29103)
$61.73

John Deere 4640 Hydraulic Pump Stroke Control Valve
Hydraulic Pump Stroke Control Valve
- For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: RE10712)
$40.84

John Deere 4640 Hydraulic Pump, New
Hydraulic Pump, New
- 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7020, 7520, 1950N, 2040S, 2355N, 2650N. (Part No: AR94660)
$959.10

John Deere 4640 Selective Control Valve
Selective Control Valve
- Return & pressure valve. For tractor models 4640, 4650, 4750, 4760, 4840, 4850, 4955, 4960, 5020, 6030, 7020, 7520, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970. Replaces AR78396. (Part No: AR86535)
$31.25

Lights
No
Picture
LED Lamp, 12 Volt
- This LED Floodlight is for 12-volt Negative Ground Systems only. It is polarity specific. It is a direct replacement for 4410, 4411 sealed beam or halogen. Features 6-LED, 1440 Lumens, 18 Watts. 4-1/2 Inch diameter. The flood beam is an excellent work light that illuminates wide and short areas. Replaces 239804, 1164605, 70239804, 71164605, 4410, A42294, A43639, A47179, D33182, L30464, 105774A, 30-3169898, 209495, 251534, C0NN15330A, C5NN13007F, E3NN15330AA, 126470C1, 131203C1, 131348C1, 131508C1, 390756R91, AE31263, AR104119, AR21059, AT25451, H7606, RE285628, RE336111, RE35168, RE561116, 285871M1, 505281M1, 509652M91, 10P2645, 105774A, 166407A, 30-3169898, 735606A (Part No: L4411LED)
$48.10

John Deere 4640 Light Bulb, Sealed Beam, 12 Volt
Light Bulb, Sealed Beam, 12 Volt
- This 12-Volt Sealed Beam has Double Contact. It is 35 Watt. Has a 4.365 inch outside diameter. Replaces: L4411, 4411, AF3892R, AT11898. (Part No: 373662R91)
$8.48

John Deere 4640 Light Switch, 4 position
Light Switch, 4 position
- 6 terminal, uses knob R46092. For tractor models (2350 with sound guard cab), (2520 from SN# 22001 and up), (3020 from SN# 150001 and up), (4000, 4020 from SN# 250001 and up), 4320, (4520 from SN# 142450 and up), (5020, 6030 with cab), 7020, 7520, (2355, 2550, 2555, 2750, 2755, 2855, 2840, 2940, 2950, 3140, 3150, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4450, 4455, 4555, 4630, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8450, 8630, 8640, 8650, 8850 all with sound guard cab), 4620, 4640. (Part No: AR48724)
$24.05

Miscellaneous
No
Picture
Cab Foam Kit
- 9-Piece - Black For 4040, 4240, 4440, 4640, 4840 1978-1979 (Part No: R0135)
$226.92

No
Picture
Cab Foam Kit
- 8-Piece - Black For 4040, 4240, 4440, 4640, 4840 1979-1982. (Part No: R2052)
$215.41

No
Picture
Cab Foam Post Kit
- 4 Piece-Black. For Cab Foam Spray Adhesive order part # 0140R. For tractor models 4040, 4240, 4440, 4640. (Part No: R1229)
$106.58

John Deere 4640 Cab Headliner
Cab Headliner
- For tractor models 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. Cab Headliner, 3 piece, Black. (Part No: R1226)
$333.80

No
Picture
Frame Rail
- Left Hand For 4640, 4840 (Part No: R3877)
$475.51

No
Picture
Frame Rail
- Right Hand For 4640, 4840 (Part No: R3878)
$475.51

Oil System
John Deere 4640 Oil Filter
Oil Filter
- Oil filter element, spin-on type. For tractor models 4040, 4230 diesel, 4240, 4320, 4430, 4400, 4520, 4620, 4630, 4640, 4880, 6030(6531A), 7020, 7520, 8430, 8440, 8630. Combines: 6600 Hill Side(6404TH), 6602(6404DH), 6620, 6622, 7700 (6404DH and TH), 7720, 882 For 4000, 4010, 4020 (Part No: TP-AR43634)
$15.81

John Deere 4640 Oil Filter
Oil Filter
- Oil filter element, spin-on type, 7 height, 5 outside diameter, 1-1/2-12 thread. For 6076T(7.6 liter) engines in tractors: 4055, 4255, 4455, 7700, 7800, 8100, 8200, 8300, 8560~ Combines: 9500, 9600. Replaces AR98329, AR101278, RE46380. For 4050, 4055, 4250, 4255, 4440, 4450, 4455, 4640, 4650, 4840, 4850, 6620, 6622, 7700, 7720, 7800, 8100, 8200, 8300, 8430, 8450, 8560, 8820, 9500, 9600 (Part No: TP-RE57394)
$19.82

John Deere 4640 Oil Pump, New
Oil Pump, New
- Crankshaft driven. Marked R62946, R504028, R124328, R132716 or R74215. For tractor models 4050, 4240, 4250, 4440, 4450, 4555, 4640, 4755, 4840, 4955, (6030 engine SN# 628711 and up), 644C, 646C, 690C, 7520, 762B, 770A, 770B, 770BH, 7710, 772A, 772B, 772BH, 7810, 790, 790D, 792, 793D, 8100, 8100T, 8110, 8110T, 8120, 8120T, 8200, 8200T, 8210, 8210T, 8220, 8220T, 8300, 8310, 8320, 8400, 8410, 8410T, 8420, 8420T, 8430, 844, 8440, 8450, 850, 850B, 8520, 8520T, 855, 8560, 862B, 8630, 8640, 8650, 8760, 8820, 890A, 9100, 9120, 9500, 9500SH, 9510, 9510SH, 9610, 9650, 9750, 992D, 992E, JD644B, JD762, JD860B. Replaces RE60622, RE44118, AR99339, AR99341, AR96190. (Part No: RE507076)
$239.60

Seats
John Deere 4640 Bottom Seat Cushion
Bottom Seat Cushion
- Bottom seat cushion, brown cloth, made to fit Personal Posture Seat. Heavy Duty Fabric On High Density Foam, Steel Back for Mechanical Suspension. Replaces John Deere Part Number AR76515 (Part No: AR76515)
$102.65

John Deere 4640 Seat Cushion, Back
Seat Cushion, Back
- This is a brand new original fabric personal posture back cushion with steel back for hydraulic or mechanical seats with five position lumbar support . It fits multiple John Deere models. It does not contain brackets or hardware. Replaces John Deere part numbers RE12049, AR71107 (Part No: AR71107)
$123.17

Sheet Metal / Body Parts
John Deere 4640 Battery Cover
Battery Cover
- Right Hand with Step For 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955. OEM# AR65024 (Part No: R3892)
$72.08

No
Picture
Battery Side Cover, LH
- For tractor models 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4430, 4630, 4240, 4350, 4440, 4640, 4840, 4250, 4450, 4650, 4850, 4755, 4955, 4055, 4255, 4455, 4555. Replaces AR56012. (Part No: R57971)
$30.33

No
Picture
Battery Side Cover, RH
- For tractor models 2940, 2950, 2955, 3055, 3150, 3155, 3255, 4030, 4040, 4050, 4230, 4430, 4630, 4240, 4350, 4440, 4640, 4840, 4250, 4450, 4650, 4850, 4755, 4955, 4055, 4255, 4455, 4555. (Part No: R57970)
$30.33

John Deere 4640 Cab Kit, 10 Piece
Cab Kit, 10 Piece
- For 11" wide seat base. Cab kit (without headliner), black 10-piece set - fits: (4030, 4230, 4430, 4630 - all with 11" wide seat base), 4040, 4240, 4440, 4640, 4840 (cab SN# to 185706). Restore your tractor to NEW condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: CKJD40-10)
$331.16

John Deere 4640 Cab Kit, 8 Piece
Cab Kit, 8 Piece
- Cab kit (without headliner), black 8-piece set fits: 4040, 4240, 4440, 4640, 4840 (SN# 185707 & up). Restore your tractor to "NEW" condition. Safer quieter and cleaner cab environment. Increases resale value. Easy installation with instructions. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: CKJD40-8)
$325.54

John Deere 4640 Cab Post Kit
Cab Post Kit
- These are items that are not included in the cab kits. Fits 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Part No: CPKJD40)
$81.97

John Deere 4640 Cab Roof
Cab Roof
- For 2350, 2850, 2950, 2955, 3155, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4430, 4440, 4450, 4555, 4630, 4640, 4650, 4755, 4840, 4850, 4955, 8430, 8440, 8640. Cab Roof is Green Gell-Coat Finish, without Pre-Cut Marker Light Holes. Must ship by truck freight- Add $100 to regular shipping charge. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR74143)
$414.62

John Deere 4640 Fender, Left Hand
Fender, Left Hand
- This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87732, RE14987 (Part No: RE11220)
$253.56

John Deere 4640 Fender, Right Hand
Fender, Right Hand
- This is a bolt on style Fender. The Fenders use Round Headlights. Replaces AR87731, RE14981 (Part No: RE11219)
$278.93

No
Picture
Headliner Kit, Black
- For tractor models 2840, 2940, (30 series with sound guard cab SN# up to 205843), 3040, 3640, (40 series with sound guard cab SN# up to 185706), 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840. (Part No: K64400)
$409.97

No
Picture
Side Screen
- Side grill panel, 26-1/4x22-3/4. For tractors: 4240, 4430. Replaces AR55022. For 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4430, 4440, 4455. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: TP-AR65461)
$148.21

No
Picture
Side Screen
- Side grill panel, 32-1/4x24-3/4. For tractors: 4840. For 4250, 4440, 4450, 4640, 4650, 4840, 6620, 7720, 8430, 8440, 8450. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: AR73911)
$121.03

No
Picture
Side Screen
- 26 1/4 x 24 3/4 For 4440, 4630, 4640. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: R0334)
$98.87

Steering
John Deere 4640 Power Steering Pump Shaft
Power Steering Pump Shaft
- Power Steering Pump Shaft. OEM part number is stamped in spline end of shaft. Used in 49CC (3.3 C. I.) pump, 6 cyl. engine. For JD 300, 400, 401, 646, 646B, 700A, 760, 760A, 2130, 3010, 3020, 3130, 4000, 4010, 4020, 4040, 4040S, 4230, 4240, 4240S, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520, (310, 444, 300B, 302A, 310A, 401C, 440C, 444C, 444CH, 510, 540B, 544C, 640, All IND), (440, 500, 544, 644, All IND (A and B)), (540, 570, All IND (A)), 600 SN# 119000> (Part No: R34348)
$81.48

John Deere 4640 Power Steering Pump Shaft
Power Steering Pump Shaft
- Power Steering Pump Shaft. OEM Part Number is stamped in the splined end of shaft. Used in 50 CC (3.3 C.I.), Pump 6 cylinder engine. For JD 300, 400, 401, 600D, 700A, 760, 1640, 1830, 1840, 2040, 2040S, 2130, 2140, 3010, 3020, 3030, 3130, 4000, 4010, 4020, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4350, 4430, 4440, 4450, 4455, 4520, 4620, 4630, 4640, 4840, 5010, 5020, 6030, 7520 (Part No: R79152)
$134.19

John Deere 4640 Pump Shaft
Pump Shaft
- Pump Shaft. OEM part number is stamped in splined end of shaft, Used in 65CC (3.3 C.I.) pump, 6 cylinder engine. For JD 3140, 4000, 4020, 4040, 410, 4230, 4240, 4320, 4430, 4440, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 500C, 8430, 8440, 8450, 8630, 8640, 8650 (Part No: R79154)
$106.23

John Deere 4640 Pump Shaft
Pump Shaft
- Pump Shaft. OEm part number is stamped in splined end of shaft, Used in 66CC (4.3 C.I.) Pump, 6 Cylinder Engine. For JD 3140, 4000, 4020, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 4640, 4840, 8430, 8440, 8630, 8640 tractors. (Part No: R79156)
$107.57

No
Picture
Steering Arm
- Left Hand - 1.750 Spline For 4555, 4560, 4630, 4640, 4650, 4755, 4760. Replaces OEM R49851 (Part No: R3026)
$221.36

No
Picture
Steering Arm
- Right Hand - 1.750 Spline For 4555, 4560, 4630, 4640, 4650, 4755, 4760. Replaces OEM R49849 (Part No: R3027)
$221.36

John Deere 4640 Steering Wheel
Steering Wheel
- Steering wheel, 16 1/2 diameter, 7/8" splined hub, 3-1/2 dished, smooth finish. Tractors: 820 Germany, 830 Germany, 2040 to serial number 349999, 2240 to serial number to 349999, 2520, 2630, 2640, 3020 serial number 123000 & up, 4000, 4020 serial number 201000 & up, 4030, 4040, 4230, 4240, 4430, For 2040, 2240, 2520, 2630, 2640, 3020, 4000, 4020, 4030, 4040, 4230, 4240, 4430, 4440, 4630, 4640, 4840, 820, 830, 8430, 8440, 8630, 8640, 9400, 9500, 9600 (Part No: T22875)
$37.50

John Deere 4640 Steering Wheel Cap
Steering Wheel Cap
- This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Part No: AL155227)
$35.39

John Deere 4640 Steering Wheel Nut
Steering Wheel Nut
- This steering wheel nut fits the following tractor models: 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2240, 2255, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 2840, 2940, 2950, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4050, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 4640, 4650, 4840, 4850, 5010, 5020, 520, 530, 6030, 620, 630, 7020, 720, 730, 7520, 820, 830, 8430, 8440, 8450, 8630, 8640, 8650, and 8850. It measures 0.75 inches wide, 0.444 inches tall, and has a 16 NF thread size. Replaces part numbers: 14H482, 14H798, and 14H904. (Part No: 353435X1)
$0.45

John Deere 4640 Tie Rod Assembly
Tie Rod Assembly
- For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760 all with Regular Wide Front Axle. Tie Rod Assembly. (Part No: AR44340)
$135.38

John Deere 4640 Tie Rod Assembly
Tie Rod Assembly
- For model 4640 SN# after 2437 with PFWD. Tie Rod Assembly. (Part No: AR44342)
$151.78

John Deere 4640 Tie Rod End
Tie Rod End
- Short threaded, A= 4.187", B= 1.00", 16 thread. Used on 4640 Serial Number below 2436 WITH POWER FRONT AXLES), (3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD) Replaces AR63590. (Part No: D8NN3289BB)
$29.50

John Deere 4640 Tie Rod End
Tie Rod End
- This Tie Rod End is 22.500 Inches from the center of the ball joint to the end of the rod. The Rod is 1.116 inches in diameter. Used on (4640 Serial number below 2436 WITH POWER FRONT AXLES), 3630, 4040, 4230, 4250, 4430, 4440 ALL WITH MFWD. Replaces AR63587, (Part No: AR63587)
$39.85

John Deere 4640 Tie Rod Inner
Tie Rod Inner
- 4.187 Long 1.00 diameter with RH Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle (Part No: R3834)
$31.19

John Deere 4640 Tie Rod Outer
Tie Rod Outer
- 22.50 Long 1.116 diameter with 8 Holes For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle (Part No: R3050)
$45.79

John Deere 4640 Tie Rod Outer
Tie Rod Outer
- 16.250 Long 1.116 diameter with 8 Holes For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Standard Front Axle (Part No: R3052)
$50.82

John Deere 4640 Tie Rod Outer
Tie Rod Outer
- 19.50 Long 1.116 diameter with 9 Holes For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Extra Wide Front Axle (Part No: R3053)
$70.10

John Deere 4640 Tie Rod Tube
Tie Rod Tube
- 17.375 Long 1.00 diameter with Internal Threads For 4040, 4230, 4240, 4430, 4440, 4630, 4640 (To S#2436) with Power Front Axle4555, 4560, 4630, 4640, 4650, 4755, 4760 with Standard Front Axle (Part No: R3046)
$90.91

No
Picture
Tie Rod Tube
- 19.750 Long 1.00 diameter with Internal Threads For 4555, 4560, 4630, 4640, 4650, 4755, 4760 with Extra Wide Front Axle (Part No: R3835)
$124.27

Wheels
No
Picture
Bearing Cone
- Outer bearing cone. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030. (Part No: 2794-TIM)
$21.52

No
Picture
Bearing Cone
- Inner bearing cone. For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030 (Part No: 469)
$28.68

John Deere 4640 Bearing Cup
Bearing Cup
- Outer bearing cup. For model applications: A series excluding AN, BW, D, G series~ 50, 60, 70. For 1010, 2010, 2510, 3010, 3020, 4010, 4020, 4040, 4520, 4620, 4630, 4640, 4840, 50, 5020, 520, 530, 60, 6030, 620, 630, 70, 720, 730, A, AN, ANH, B, BN, BNH, BO, BR, BW, D, G (Part No: TP-JD7266)
$6.71

John Deere 4640 Front Wheel Bearing Kit
Front Wheel Bearing Kit
- Wheel bearing kit. Kit contains one each: 453X(Cup), 469(Cone), 2720(Cup), AR27806(Seal), R28574(Retainer), A1556R(Gasket). For tractor models 4520, 4620, 4630, 4640, 4840, 5020 and 6030. For 4520, 4620, 4630, 4640, 4840, 5020, 6030. Repairs one wheel. (Part No: FW159S)
$67.56

No
Picture
Front Wheel Hub
- 8 bolts on 8 inch bolt circle. Pilot 6 inches, 6.660 inch hub length, 4.592 inch inner bearing diameter, 3 inch outer bearing diameter. Uses 5/8 inch bolts. Includes Bearing Cups (not bearings). Uses Wheel Bearing Kit # WBKJD10 and Wheel Bolt # WB58. For tractor models 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030. Industrial models: 410, 415, 500, 510, 610, 700, 710, 2355. (Part No: R63556)
$138.18

John Deere 4640 Wheel Bearing Kit
Wheel Bearing Kit
- For tractor models 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 9940, 9950, (4520, 4620, 5020, 6030 all with R63556 Hub, (2355, 2555, 2750, 2755 all GP models with extra heavy duty fixed axle. Kit contains 1 each of the following p/n 469(Cone), 453X(Cup), 2794(Cone), 2720(Cup), 32453(Seal), R28574(Seal Retainer). (Part No: WBKJD10)
$64.32

No
Picture
Wheel Hub
- 8 Bolt For 2355, 2555, 2750, 2755, 2855, 4520, 4555, 4560, 4620, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5020, 6030 (Part No: R0268)
$138.32



Accessories / Supplies
John Deere 4640 Auxiliary Heater, Universal
Auxiliary Heater, Universal
- This universal auxiliary heater is used for tractor cabs, combines, backhoes, dozers, forklifts, etc. using 5/8 inch heater hose connections. Hot water forced air heat. Dimensions: 6-1/2 inches x 9-1/2 inches x 9 inches, steel powder coat housing with aluminum core. 3-speed high volume squirrel cage fan, 12-volt, 20, 000 BTU includes switch, brackets, instructions. (Part No: MIS3127)
$239.98

Brakes
John Deere 4640 Brake Rivet Tool
Brake Rivet Tool
- Used to rivet brake lining to existing shoe or band. Includes a tool to drive out the old rivets and a tool to peen the new rivet, mounts into a vice, 1-1/4 inch throat, 1/8 inch diameter rivet punch. (Part No: RIVET_TOOL)
$33.95

John Deere 4640 Brake Rivet Tool, Large
Brake Rivet Tool, Large
- Larger version of our Brake rivet tool. 3-3/8 inch deep throat x 2-1/8 inch high throat. Includes 1 punch for brake shoe rivets and 1 punch for clutch pulley brake. (Part No: LGRIVET)
$86.25

Cooling System
John Deere 4640 Magnetic Block Heater
Magnetic Block Heater
- Universal. Magnetic utility heater. 120 volt AC, 200 Watts. Built-in thermostat maintains optimum temperature - will not exceed 250 degree F (121 degree C). Quick-grip handle protects hands from heat. 4-3/8 inches (11cm) length, 2-1/2 inches (6.3cm) width, 3 inches (7.5cm) height (including handle). (Part No: MBH1153)
$70.77

John Deere 4640 Radiator Drain Tap
Radiator Drain Tap
- This drain tap fits various tractor models as a radiator, engine block, and hydraulic drain tap. This is 1/4 inch NPT 18 thread. Please verify size and thread count before ordering. Replaces: AM2780T, AM292T, AT13740. (Part No: C9NN8115A)
$3.75

John Deere 4640 Zip Leak - Industrial Radiator Stop Leak
Zip Leak - Industrial Radiator Stop Leak
- A professional strength stop leak for tractors, trucks and construction equipment. Designed for large, heavy duty cooling systems. 5 oz. Bottle. Instructions/Usage: For average antique tractors (120-160 CID engines) use 1/4 bottle for 15 minutes, if the leak fails to stop, add an additional table spoon. (Part No: Z14012)
$10.23

Decals and Emblems
No
Picture
2 Legged Deer Decal
- John Deere Leaping 2-Legged Deer, 3 1/2" x 4" black & silver, vinyl cut. (Part No: R4697)
$9.77

John Deere 4640 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere Leaping 2 Legged Deer, 2 1/2" x 3", black & yellow, vinyl cut. (Part No: R4696)
$9.77

No
Picture
2 Legged Deer Decal
- John Deere Leaping 2-Legged Deer, 2" x 2 1/2", black & yellow, vinyl cut (Part No: R4695)
$9.77

No
Picture
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" black with yellow deer on vinyl. (Part No: R5186)
$16.28

John Deere 4640 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" yellow with black deer on vinyl. (Part No: R5187)
$16.28

John Deere 4640 2 Legged Deer Decal
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 9" yellow with black deer on vinyl. (Part No: R5188)
$27.24

No
Picture
2 Legged Deer Decal
- John Deere leaping 2 legged deer, 6" black with silver deer on vinyl. (Part No: R5189)
$16.28

John Deere 4640 4 Legged Deer Decal
4 Legged Deer Decal
- "John Deere Quality Farm Equipment" 10" on vinyl. (Part No: R5184)
$33.52

No
Picture
4 Legged Deer Decal
- Says "John Deere Quality Farm Equipment + Parts and Service" with leaping 4 legged deer, 10" on vinyl. (Part No: R5185)
$33.52

John Deere 4640 Loader Decal, Yellow
Loader Decal, Yellow
- Universal John Deere loader decal, 2" x 24". (Part No: JDL2Y)
$15.58

Drive Train
John Deere 4640 Lucas Hub Oil (quart)
Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.05

Electrical System

NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

John Deere 4640 Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

John Deere 4640 Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$12.71

John Deere 4640 Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$11.93

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$86.46

No
Picture
Battery Hold Down
- Universal hold down for batteries that measure 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$16.55

No
Picture
Battery Hold Down
- Universal Battery Hold down. Verify your battery measurements. This will fit a 9 3/16 inches long and 7 3/16 inch wide battery. (Part No: 1111-0147)
$13.43

John Deere 4640 Battery Hold Down Bolts - Pair
Battery Hold Down Bolts - Pair
- These "J" bolts measure 10 1/2 inches long and are universal for many batteries. Verify length. Price is for a pair. (Part No: 393161R1)
$10.47

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 80 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW36)
$37.48

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.83

John Deere 4640 Coil Bracket
Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$3.57

John Deere 4640 Coil, High Performance (Black), 12 Volt, Epoxy Filled
Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.43

John Deere 4640 Coil, High Performance (Black), 12 Volt, Oil Filled
Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$36.05

John Deere 4640 Coil, High Performance (Black), 6 Volt, Epoxy Filled
Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$45.43

John Deere 4640 Coil, High Performance (Black), 6 Volt, Oil Filled
Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$44.90

John Deere 4640 Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
- Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 40601)
$45.43

John Deere 4640 Coil, High Performance (Chrome), 12 Volt, Oil Filled
Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$40.51

John Deere 4640 Coil, High Performance (Chrome), 6 Volt, Oil Filled
Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40001)
$40.51

John Deere 4640 Coil, Ultra High Performance (Black), Epoxy Filled
Coil, Ultra High Performance (Black), Epoxy Filled
- This coil is used with Ignitor II ignition kits. Epoxy filled coils provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Delivers up to 45, 000 volts, enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111)
$50.16

John Deere 4640 Coil, Ultra High Performance (Black), Oil Filled
Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45011)
$43.40

John Deere 4640 Coil, Ultra High Performance (Chrome), Oil Filled
Coil, Ultra High Performance (Chrome), Oil Filled
- Pertronix Flame Thrower II Chrome, ultra high performance coil is for 12-volt systems using "Ignitor II" electronic conversion kits or any 6 volt system using "Ignitor II". Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Coil has 0.6 Ohms of resistance. For use with Ignitor II Electronic Ignition Module. (Part No: 45001)
$44.66

John Deere 4640 Distributor Cap, Wico
Distributor Cap, Wico
- For All models using Wico distributor, clip type cap. (Part No: AT14190)
$48.40

John Deere 4640 Magneto Cap, 2 Cylinder
Magneto Cap, 2 Cylinder
- For tractor models using WICO XH magneto ONLY. (Part No: 1006501)
$50.88

John Deere 4640 Magneto, Wico XH & XHD, Service & Parts Manual
Magneto, Wico XH & XHD, Service & Parts Manual
- Wico XH And XHD magneto service instructions and parts list. This is a reprint of the original manual that has exploded views of all parts on the tractor with numbered pictures giving great detail on assembly and disassembly. It also gives you a guide with numbers for ordering parts. (Part No: MAG6)
$14.25

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$2.73

John Deere 4640 Spark Plug
Spark Plug
- Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$4.83

John Deere 4640 Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

John Deere 4640 Spark Plug Wire Set, 4 Cylinder, Univeral
Spark Plug Wire Set, 4 Cylinder, Univeral
- Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$13.40

John Deere 4640 Spark Plug Wire Set, 4 Cylinder, Universal
Spark Plug Wire Set, 4 Cylinder, Universal
- For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. (Part No: CPN12259)
$12.92

John Deere 4640 Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259)
$12.92

John Deere 4640 Spark Plug Wire Set, Universal, 6 Cyl.
Spark Plug Wire Set, Universal, 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$15.00


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

John Deere 4640 Starter, Generator, Distributor Tag, 6 Volt, Blank
Starter, Generator, Distributor Tag, 6 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO6)
$14.55

John Deere 4640 Stripper and Crimping Tool
Stripper and Crimping Tool
- Professional Fast and Easy tool for stripping and crimping electrical wires. (Part No: B1SB6718)
$24.30

John Deere 4640 Tag for Starter\Generator, 12 Volt, Blank
Tag for Starter/Generator, 12 Volt, Blank
- Comes with 2 rivets. 2.5" long, .800" wide, 2" center to center rivet hole, .150" dia. rivet holes. Customer must stamp numbers. (Part No: DELCO12)
$14.45

Engine Gaskets
John Deere 4640 Silicone Black RTV
Silicone Black RTV
- Permatex black RTV silicone adhesive sealant. Provides a waterproof seal around metal, glass, rubber. Designed for indoor or outdoor use, 3 oz. tube. (Part No: PRM16BR)
$5.70

John Deere 4640 Silicone Blue RTV
Silicone Blue RTV
- Permatex ultra blue, no leak RTV silicone gasket, oil resistant, use on valve covers, oil pans, timing covers, water pumps. Temperature range -75 degree F to +500 degree F, 3.35 ounce tube. (Part No: PRM77BR)
$7.97

John Deere 4640 Silicone Copper RTV
Silicone Copper RTV
- Permatex ultra copper, hi-temp RTV silicone gasket. Three times more oil resistant than conventional silicone. Use on exhaust manifolds, valve covers, oil pans, water pumps. Temperature range -75° F to +700° F, 3 oz. tube. (Part No: PRM101BR)
$10.47

Engine Rebuild Kits
John Deere 4640 Lucas Assembly Lube
Lucas Assembly Lube
- Lucas Assembly Lube (4 oz). Designed to be used as an initial lubricant to metal surfaces. It mixes with any oil and will not plug filters. This product clings to all surfaces and is an excellent rust inhibitor, allowing long term storage for all parts. It is useful wherever tension or torque is applied. Key Benefits are: Use to pre lube camshaft, bearings, lifters and valve train. Prevents seizing, galling and scuffing perfect for engine lding, super slick and tacky, easy to use, excellent rust inhibitor, excellent for long term storage, contains Zinc, Moly and other extreme pressure additives for maximum protection during engine break-in. (Part No: 10152)
$4.52

Engine Parts

NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Engine Rings

NOTE
Piston Ring Sets
- Don't see the correct ring set for your tractor? Give us a call and ask for a Hastings Ring Set (made in USA). We need the following information to correctly find the set you need: 1. Engine size & type (Ex: 233 CID Gas) 2. Number of engine cylinders, 3. Cylinder bore size, 4. Number and size of compression rings for each piston (Ex: (2) 3/32"), 4. Number and size of oil rings for each piston (Ex: (1) 5/32").
NOTE

Exhaust System
John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89020C)
$78.88

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.5 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89025C)
$92.67

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 2.75 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89027C)
$99.58

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89051C)
$117.23

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.00 inch inside diameter inlet with extended curve. This is a universal part. Verify measurements before ordering. (Part No: 146520CHR)
$112.10

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89054C)
$115.52

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 3.75 inch inside diameter inlet. It is 4 inches outside diameter beyond the inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89375C)
$144.46

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is single wall, 53 inches long with a slotted, 3.50 inch inside diameter inlet. It has an extended curve on the outlet. This is a universal part. Verify measurements before ordering. (Part No: 146490CHR)
$131.51

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 4.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89057C)
$129.84

John Deere 4640 Chrome Exhaust Stack
Chrome Exhaust Stack
- This Chrome Stack is Single Wall, 48 inches long with a slotted, 5.00 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: ZNL89485C)
$159.35

John Deere 4640 Chrome Exhaust System
Chrome Exhaust System
- This Chrome Stack is Single Wall, 42 inches long with a slotted, 2.50 inch inside diameter inlet. This is a universal part. Verify Measurements before ordering. (Part No: L102236CHR)
$85.96

John Deere 4640 Muffler Clamp, 1-1\2
Muffler Clamp, 1-1/2
- New Clamp for 1-1/2 inch outside diameter muffler inlet. (Part No: MC112)
$2.19

John Deere 4640 Muffler Clamp, 1-1\4
Muffler Clamp, 1-1/4
- New Clamp for 1-1/4 inch outside diameter muffler inlet. (Part No: MC114)
$3.98

John Deere 4640 Muffler Clamp, 1-1\8
Muffler Clamp, 1-1/8
- New Clamp for 1-1/8 inch outside diameter muffler inlet. (Part No: MC118)
$4.17

John Deere 4640 Muffler Clamp, 1-3\4
Muffler Clamp, 1-3/4
- New Clamp for 1-3/4 inch outside diameter muffler inlet. (Part No: MC134)
$2.93

John Deere 4640 Muffler Clamp, 1-3\8
Muffler Clamp, 1-3/8
- New Clamp for 1-3/8 inch outside diameter muffler inlet. (Part No: MC138)
$2.50

John Deere 4640 Muffler Clamp, 1-5\8
Muffler Clamp, 1-5/8
- New Clamp for 1-5/8 inch outside diameter muffler inlet. (Part No: MC158)
$2.93

John Deere 4640 Muffler Clamp, 1-7\8
Muffler Clamp, 1-7/8
- New Clamp for 1-7/8 inch outside diameter muffler inlet. (Part No: MC178)
$1.94

John Deere 4640 Muffler Clamp, 2
Muffler Clamp, 2
- New Clamp for 2 inch outside diameter muffler inlet. (Part No: MC200)
$2.91

John Deere 4640 Muffler Clamp, 2-1\2
Muffler Clamp, 2-1/2
- New Clamp for 2-1/2" outside diameter Muffler Inlet (Part No: MC212)
$3.30

John Deere 4640 Muffler Clamp, 2-1\4
Muffler Clamp, 2-1/4
- New Clamp for 2-1/4 inch outside diameter muffler inlet. (Part No: MC214)
$3.14

John Deere 4640 Muffler Clamp, 2-3\4
Muffler Clamp, 2-3/4
- New Clamp for 2-3/4 inch outside diameter muffler inlet. (Part No: MC234)
$4.50

John Deere 4640 Muffler Clamp, 2-3\8
Muffler Clamp, 2-3/8
- New Clamp for 2-3/8 inch outside diameter muffler inlet. (Part No: MC238)
$2.84

John Deere 4640 Muffler Clamp, 3
Muffler Clamp, 3
- New Clamp for 3 inch outside diameter muffler inlet. (Part No: MC300)
$4.50

John Deere 4640 Muffler Clamp, 3-1\2
Muffler Clamp, 3-1/2
- New Clamp for 3-1/2 inch outside diameter muffler inlet. (Part No: MC312)
$4.75

John Deere 4640 Muffler Clamp, 3-1\4
Muffler Clamp, 3-1/4
- New Clamp for 3-1/4 inch outside diameter muffler inlet. (Part No: MC314)
$6.50

John Deere 4640 Muffler Clamp, 4
Muffler Clamp, 4
- New Clamp for 4 inch outside diameter muffler inlet. (Part No: MC400)
$7.50

John Deere 4640 Muffler Clamp, 4-1\2
Muffler Clamp, 4-1/2
- New Clamp for 4-1/2 inch outside diameter muffler inlet. (Part No: MC412)
$7.98

John Deere 4640 Muffler Clamp, 5
Muffler Clamp, 5
- New Clamp for 5 inch outside diameter muffler inlet. (Part No: MC500)
$7.98

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 1.50 inch pipe. (Part No: R1798)
$5.70

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 1.750 inch pipe. (Part No: R1799)
$5.84

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 2.0 inch pipe. (Part No: R1800)
$7.25

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 2.250 inch pipe. (Part No: R1801)
$7.23

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 2.50 inch pipe. (Part No: R1802)
$6.69

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 2.750 inch pipe. (Part No: R1804)
$10.02

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 3.50 inch pipe. (Part No: R1806)
$8.57

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 4.0 inch pipe. (Part No: R1807)
$9.80

John Deere 4640 Rain Cap
Rain Cap
- This rain cap is for a 3.0 inch pipe. (Part No: R1805)
$9.39

John Deere 4640 Stainless Steel Clamp, 2 Inch
Stainless Steel Clamp, 2 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90869A)
$5.27

John Deere 4640 Stainless Steel Clamp, 2.5 Inch
Stainless Steel Clamp, 2.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90871A)
$5.54

John Deere 4640 Stainless Steel Clamp, 2.75 Inch
Stainless Steel Clamp, 2.75 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90872A)
$5.94

John Deere 4640 Stainless Steel Clamp, 3 Inch
Stainless Steel Clamp, 3 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90873A)
$5.57

John Deere 4640 Stainless Steel Clamp, 3.5 Inch
Stainless Steel Clamp, 3.5 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90874A)
$5.81

John Deere 4640 Stainless Steel Clamp, 4 Inch
Stainless Steel Clamp, 4 Inch
- This Stainless Steel Clamp is used with Chrome Stacks and in other applications. (Part No: ZNL90875A)
$6.42

Fuel System / Air Intake
John Deere 4640 Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$4.83

John Deere 4640 Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

John Deere 4640 Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.86

John Deere 4640 Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$4.79

John Deere 4640 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

John Deere 4640 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$4.14

John Deere 4640 Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

John Deere 4640 Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$33.23

John Deere 4640 Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks, use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

John Deere 4640 Fuel Tank Repair Kit
Fuel Tank Repair Kit
- Permanent hole and crack repair for metal fuel tanks in 30 minutes. Kit includes instructions and materials needed to fix cracks up to 4 inches long and holes up to 3/8 inches in diameter. NOT for plastic fuel tanks. (Part No: FTR180)
$21.14

John Deere 4640 Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.00

John Deere 4640 Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material, .042 inches thick, 3 foot section. (Part No: FTW494)
$4.13

John Deere 4640 Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$10.67

John Deere 4640 Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

John Deere 4640 Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.20

John Deere 4640 Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$7.98

Gaskets
John Deere 4640 Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 3/32 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR332)
$15.75

John Deere 4640 Gasket Material, Cork Rubber
Gasket Material, Cork Rubber
- 1/16 inch thick x 12 inches wide x 24 inches long. For making general purpose gaskets. (Part No: GSKCR116)
$8.93

John Deere 4640 Gasket Material, Exhaust Manifold
Gasket Material, Exhaust Manifold
- 1/16 inch thick x 12 inches wide x 28-1/2 inches long. Perforated steel core to make manifold gaskets. (Part No: GSKEM1228)
$20.78

John Deere 4640 Gasket Paper, .0160
Gasket Paper, .0160
- .0160 inch x 18 inches x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1844)
$15.79

John Deere 4640 Gasket Paper, .0275
Gasket Paper, .0275
- .0275 inch thick x 18 inches wide x 98 inches long. This gasket paper is for general purpose gasket making and NOT for high temperature applications. (Part No: GSKP1898)
$24.15

Gauges
John Deere 4640 Ammeter Gauge
Ammeter Gauge
- 60-0-60, 12 volt, 2 inch body diameter. Not illuminated. (Part No: AMG60)
$2.99

John Deere 4640 Hourmeter
Hourmeter
- DC voltages from 12 volt thru 36 volt nominal. Heavy duty glass-reinforced polyester body. Internal shock shields and grommets protect movement from shock and vibration damage. Fits 2-1/4 inch opening, three (3) mounting screws with nuts and two (2) blade terminals included. (Part No: HM771)
$46.42

John Deere 4640 Hourmeter, Analog
Hourmeter, Analog
- 2 inch, black. Can be used on any tractor with a 12 to 24 volt electrical system. (Part No: S.52672)
$38.40

John Deere 4640 Oil Gauge Copper Line Kit
Oil Gauge Copper Line Kit
- Universal, for tractors using 1/8 inch x 6 foot copper oil line. Includes 6 foot 1/8 inch line, 2 inch x 5/16 inch-24 UNF nuts, 2 compression sleeves, and a 1/8 inch-27 NPTF female to 5/16 inch-24 UNF male adapter. (Part No: UNI523)
$25.20

John Deere 4640 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/8 inch tube. Brass. (Part No: 919095)
$13.95

John Deere 4640 Oil Line Adapter
Oil Line Adapter
- Oil Gauge fittings may be different even for the same models. Here is an Oil Line Adapter if you have a gauge line without removable fittings, this converts 1/8 inch pipe thread to 1/4 inch tube. Brass. (Part No: IHS626)
$12.95

John Deere 4640 Oil Pressure Gauge
Oil Pressure Gauge
- Universal Complete assembly with oil tube and mounting hardware. 80 psi. Line uses 1/4 inch connection with adapters for 3/8 and 1/2 inch. (Part No: SSW0002)
$8.62

John Deere 4640 Temperature Gauge
Temperature Gauge
- Universal water temperature gauge (0-280 degree scale). Fits tractor model using 2 inch gauge. Comes with 70 inch capillary tube and will fit a 1/2 inch or 3/4 inch male adapter, engine block or radiator threaded hole. (Part No: 1042944)
$24.26

John Deere 4640 Temperature Gauge, Universal
Temperature Gauge, Universal
- For 2 inch mounting hole. Complete assembly with bracket and adapters for block. Fitting for lead is 3/8 inch NPT and 1/2 inch NPT adapter. Install in block, head or hose. Temperature is measured in 3 zones (COLD, NORMAL, HOT). Black face with white needle. Extra-long 77 inch capillary line. Fits all liquid cooled engines. (Part No: UTG50)
$16.20

John Deere 4640 Temperature Gauge, Universal
Temperature Gauge, Universal
- Heat indicator for 2 inch hole. Complete assembly with bracket and adaptors. Numeric Face. Install in block, head or hose. Dial calibrated to 250 degrees. 70 inch metal wrapped capillary line. (Part No: UTG25)
$22.02

Hitch / Drawbar
John Deere 4640 Center tube, Stablizer
Center tube, Stablizer
- Center tube for SK102CH stabilizer kit. (Part No: SK102CH-CT)
$17.69

No
Picture
Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$12.09

John Deere 4640 HAIR PIN ASSORTMENT
HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

John Deere 4640 HITCH BALL 10000LB 2-5\16
HITCH BALL 10000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

John Deere 4640 HITCH BALL 15000LB 2-5\16
HITCH BALL 15000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

John Deere 4640 HITCH BALL 2000LB
HITCH BALL 2000LB
- 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

John Deere 4640 HITCH BALL 3500LB
HITCH BALL 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

John Deere 4640 HITCH BALL 5000LB
HITCH BALL 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

John Deere 4640 HITCH BALL 5000LB 2-5\16
HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

John Deere 4640 LINCH PIN, 10 Pack
LINCH PIN, 10 Pack
- Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

John Deere 4640 Lift Arm Bushing
Lift Arm Bushing
- This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

John Deere 4640 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

John Deere 4640 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Package of 10 linch pins. 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

John Deere 4640 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

John Deere 4640 Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

John Deere 4640 Universal Drawbar Lock
Universal Drawbar Lock
- For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$23.36

John Deere 4640 Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

John Deere 4640 Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$49.47

Hydraulic System
John Deere 4640 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Implements
John Deere 4640 Axle Bolt
Axle Bolt
- Axle bolt, 1 each (Ref 3). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: BH1317)
$14.00

John Deere 4640 Axle Nuts (5)
Axle Nuts (5)
- 5 Pack of Axle Nuts. Enter 1 for pack of 5. (Ref 4) Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36 (Part No: 15622BH)
$1.69

John Deere 4640 Bearing Cup
Bearing Cup
- This part fits Caster Assembly (Part Number BH215, Ref #6). Sold individually, two used per caster assembly. Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. Also replaces 132709, 15191, 32190M1, L44610. (Part No: 170BH)
$1.94

John Deere 4640 Bearing cone (L44643)
Bearing cone (L44643)
- For Caster Assembly, requires 2.Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 22)
$6.30

John Deere 4640 Bush Hog Axle Spacer Bushing
Bush Hog Axle Spacer Bushing
- Used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: SPB40)
$4.91

John Deere 4640 Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inches to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

John Deere 4640 Caster Assembly
Caster Assembly
- Tail wheel and hub assembly with grease fitting and fork assembly. Shaft on Yoke is 1-1/2 inch diameter, 8 inches overall length, 7-1/4 inch to pin hole. New style tail assembly, used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405. Wheel must be attached to fork. For Bush Hog cutters with SPB40 spacer (included), assembly will also replace all models with Timken bearings. (Part No: 12269)
$176.32

John Deere 4640 Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

No
Picture
Graphite Lubricant
- Dry Graphite Powder, 5 lb container, used to lubricate planter seed channels. Recommended application rate: 2 oz per box. Typically treats 25-30 acres. (Part No: TP99500GP)
$19.95

John Deere 4640 HUB with BRG CUPS
HUB with BRG CUPS
- 4-bolt, 5 inch bolt circle and 3-5/8 inch wheel pivot hub with bearing cups (1 inch axle) (Ref #5). This part fits caster assembly (part number BH215). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36. (Part No: BH1311)
$24.90

John Deere 4640 Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

No
Picture
Round Bale Tine 31.5 Inches
- Fully Hardened. Also replaces Kverneland 221151. (Part No: 221129)
$44.70

No
Picture
Round Bale Tine 38.5 Inches
- Fully Hardened. Also replaces Kverneland 241107, 241161. (Part No: 241100)
$77.06

No
Picture
Round Bale Tine 43 Inches
- Fully Hardened. (Part No: 241166)
$97.46

No
Picture
Round Bale Tine 49 Inches
- Fully Hardened. (Part No: 241162)
$100.37

No
Picture
Round Bale Tine 55 Inches
- Fully Hardened. (Part No: 241163)
$109.42

John Deere 4640 Seal, Caster
Seal, Caster
- Seal, 2 required (Ref #2). Used on many Bush Hog rotary cutters. Used on models 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 2510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. (Part No: 30BH)
$5.56

John Deere 4640 Tail Wheel Assembly
Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

No
Picture
Talc Powder Lubricant
- Dry Talc powder lubricant, 8 lb container. Absorbs moisture and keeps treated seed from sticking together in planter boxes. Recommended application rate: 3 oz. Coverage: Typically treats 60-80 acres. (Part No: TP19000TP)
$21.75

Lights
John Deere 4640 Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

John Deere 4640 Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

John Deere 4640 Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

John Deere 4640 Safety Light Amber
Safety Light Amber
- 12 volt amber safety light, 4-1/4 inch diameter, 3/8 inch diameter by 5/8 inch mounting stud. Does not include flasher. (Part No: S.61357)
$12.56

John Deere 4640 Work Lamp, HID, Flood Light
Work Lamp, HID, Flood Light
- Universal high intensity discharge flood light, 35 watt Xenon H3 lamp, size 4.725 inch width X 4.330 inch height X 5.512 inch length, internal ballast, hardened glass lens, far longer life span than halogen. 3000 to 3500 hours versus 280 to 400, higher lumen output 3200 lumens versus 700-1000 for halogen bulbs. (Part No: WL8500-E)
$127.64

John Deere 4640 Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

John Deere 4640 Work Light 12V
Work Light 12V
- Universal Work light is 12 volt, 3000 candle power, and a trapezoidal light pattern. I does swivel up and down, not side-to-side. Comes with 4-1/2" diameter sealed beam lamp, part number L4411. Does not have a switch on the back. (Part No: L408-12V)
$41.40

Miscellaneous
No
Picture
Cab Foam Kit
- With Headliner 7-Piece - Black For tractor models with 1300 Series Hiniker Cab (Part No: R1235)
$294.33

John Deere 4640 Cab Foam Kit
Cab Foam Kit
- With Headliner 10-Piece - Black For tractor models with QT1 Year Round Cab. Must be truck shipped - $75 will be added for shipping due to weight and size. *IF ORDERING ON-LINE, THIS ADDITIONAL SHIPPING CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT HAS PRINTED. (Part No: R1236)
$346.95

No
Picture
Cab Foam Kit
- 7-Piece - Black For tractor models with Hinson Cab. (Part No: R3247)
$333.80

John Deere 4640 Canopy
Canopy
- 60 inches wide x 65 inches long, molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars, no mounting bolts pass through molding. Available in green, white, orange, blue, or red. Please specify in comments section which color you need. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257X)
$430.31

John Deere 4640 Canopy Mounting Kit, 2 Post
Canopy Mounting Kit, 2 Post
- Mounts the canopy to your 2 post ROP frames except Hoop Type Frame. We need the measurement of the top of the ROP and the size of the ROP Tubing used. Put sizes in the comments section of the order form. (Part No: B6603)
$75.80

No
Picture
Canopy Mounting Kit, 4 Post
- Mounts the canopy to any 4 post ROP frame. (Part No: B6604)
$65.44

No
Picture
Canopy Mounting Kit, Hoop Type
- Mounts the canopy to CURVED OR SQUARE TOP hoop type ROP frames up to 52 inches wide with leg thickness up to 4 inch x 2 inch. (Part No: B6602)
$110.28

John Deere 4640 Canopy, Small Tractors
Canopy, Small Tractors
- 45 inches wide x 60 inches long. Molded from virtually indestructible flexible U.V. stabilized polyethylene, exclusive socket mounting system for torsion bars NO mounting bolts pass through molding. Available in white, green, orange, blue, and red please specify in comments section which color you prefer. Hardware to mount to your ROPS sold separately. Additional $150.00 shipping due to weight and size. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: B257XSTD)
$374.50

John Deere 4640 Deluxe Canopy, 3 Bow
Deluxe Canopy, 3 Bow
- Red. 3-Bow Deluxe Canopy. This sectional soft canopy with steel bows comes complete with cover and universal mounting brackets to fit on MOST fenders. Fits fendered wheel tractors, NOT including those with square fenders. 48 inch spread from Mounting brackets (41 inch spread at the top of canopy) Height is approximately 31 inch. (Part No: RFC100R)
$235.53

John Deere 4640 Deluxe Tractor Umbrella
Deluxe Tractor Umbrella
- Deluxe Umbrella comes with universal mounting bracket. Four spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework. Frame constructed of tubular steel. All metal parts are zinc plated for rust resistance. 54 inch square cover is made of durable polyester material. Each corner is double reinforced. AVAILABLE IN RED, YELLOW, ORANGE, WHITE or BLUE. State color desired in comments section of order form when ordering. (Part No: TU56-X)
$155.22

John Deere 4640 HAND CLEANER GALLON
HAND CLEANER GALLON
- Hand cleaner, with dispenser pump. 1 gallon plastic bottle. (Part No: PRM25218)
$28.72

Oil System
John Deere 4640 Lucas Heavy Duty Oil Stabilizer (quart)
Lucas Heavy Duty Oil Stabilizer (quart)
- A pure petroleum multi-use oil supplement. Controls noise, heat and wear in manual transmissions and differentials. Number one in the heavy duty and high performance industries. Lucas Oil Stabilizer is a 100% petroleum product formulated to eliminate dry starts and reduce friction, heat and wear in any type of engine. It allows motor oils a higher degree of lubricity which reduces oil consumption and operating temperatures. Use Lucas Oil Stabilizer in gear oil to stop leaks, reduce operating temperatures and increase the life of the gear oil. Since it is pure petroleum. Key Features Increase oil life at least 50% longer, Reduces oil consumption, Eliminates dry starts, Raises oil pressure, and Increases power and miles per gallon. (Part No: LU10001)
$15.12

PTO / Driveline
John Deere 4640 Driveline Assembly
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$201.19

John Deere 4640 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

John Deere 4640 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

John Deere 4640 Overrun Coupler with Quick Release
Overrun Coupler with Quick Release
- This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$45.73

John Deere 4640 PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Paint
John Deere 4640 44 Minute DVD - How to Paint a Tractor
44 Minute DVD - How to Paint a Tractor
- This DVD demonstrates the entire painting process including sanding, priming, body work, painting and decals. A John Deere B is used as the sample tractor, but the information will pertain to any make or model - the techniques are the same. Safety is also discussed. (Part No: JDV-02250)
$25.68

No
Picture
Acrylic Hardener, 16oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12P)
$42.20

No
Picture
Acrylic Hardener, 8oz
- This Acrylic Hardener is for all our Alkyd Enamel paint to be mixed with either gallons or quarts. Lead free. Improves initial dry time and hardness development. Not compatible with other fast dry enamel or other paints. This 8 ounce container mixes from 2 quarts to 1 gallon of unreduced paint. This product will greatly increase the paints anti-chip resistance and will add a slight gloss to the paint. (Part No: TP12HP)
$22.04

No
Picture
Alumimum Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP402HHSP_)
$49.02

No
Picture
Black Hi-Heat Spray Paint
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** 12 oz. spray can. Withstands heat up to 650 degrees for use on stacks and mufflers. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP411HHSP_)
$49.02

No
Picture
Paint, Aluminum, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312GAL)
$44.00

No
Picture
Paint, Aluminum, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312QT)
$17.55

No
Picture
Paint, Aluminum, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP312SP)
$44.19

No
Picture
Paint, Clear Coat, 1 Gallon
- From Tisco providing OEM quality. High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447GAL)
$58.92

No
Picture
Paint, Clear Coat, 1 Quart
- High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447QT)
$21.99

No
Picture
Paint, Clear Coat, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High strength air dry Acrylic laquer. Protects the original paint finish, adds more shine, prolongs color and prevents fade. Water clear non-yellowing gloss coat, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP447SP)
$44.19

No
Picture
Paint, Gloss Black, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550GAL)
$44.00

No
Picture
Paint, Gloss Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP550SP)
$44.19

No
Picture
Paint, Gray Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700GAL)
$44.00

No
Picture
Paint, Gray Primer, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2700QT)
$20.58

No
Picture
Paint, Gray Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. (Part No: TP2700SP)
$44.19

No
Picture
Paint, Green, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210GAL)
$53.10

No
Picture
Paint, Green, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210QT)
$20.61

No
Picture
Paint, Green, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP210SP)
$47.78

No
Picture
Paint, Industrial Yellow, 1 Gallon
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530GAL)
$70.41

No
Picture
Paint, Industrial Yellow, 1 Quart
- High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530QT)
$31.49

No
Picture
Paint, Industrial Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP530SP)
$47.78

No
Picture
Paint, JD Yellow, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190GAL)
$44.00

No
Picture
Paint, JD Yellow, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190QT)
$17.55

No
Picture
Paint, JD Yellow, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.*** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP190SP)
$44.19

No
Picture
Paint, Red Primer, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP3987SP)
$44.19

No
Picture
Paint, Satin Black, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225GAL)
$44.00

No
Picture
Paint, Satin Black, 1 Quart
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225QT)
$17.55

No
Picture
Paint, Satin Black, Aerosol, 6 Cans
- ****ENTER 1 FOR A CASE OF 6 CANS. NOT SOLD INDIVIDUALLY.**** From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics.PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP225SP)
$44.19

No
Picture
Paint, Yellow Primer, 1 Gallon
- From TISCO, providing OEM quality. High Strength air dry enamel with Alkyd resins to assure durability. Fade resistant, smooth uniform film characteristics. PAINT NOTES: All paint is NON-RETURNABLE. Make sure you order the correct paint! Paint cannot be shipped to California due to California Regulations. All Paint can only ship GROUND UPS. (Part No: TP2720GAL)
$44.00

No
Picture
Slip Resistant Coating
- Gallon can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116GAL)
$68.39

No
Picture
Slip Resistant Coating
- Quart can. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 19 to 25 square feet. (Part No: BL116QT)
$28.23

No
Picture
Slip Resistant Coating Kit
- Do it yourself kit. Comes with one gallon of liner, mini roller with tray, two replacement roller covers, 2" brush, and sanding sponge. For use in a variety of applications where slip resistance or sound deadening qualities are desired. Moisture and chemical resistant, helps protect against corrosion. Ready to use as is for easy application and touch up with brush or roller. Coverage area is 75 to 100 square feet. (Part No: BL116KIT)
$99.22

No
Picture
Tire Paint, Black
- Black tire paint (1 Quart)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. A little goes a long way! (Part No: E844Q)
$22.47

John Deere 4640 Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

John Deere 4640 Tire Paint, Black
Tire Paint, Black
- Black tire paint (1 Gallon)- The best way to make tires look like new. Our paint is a permanent water based paint that applies easily and dries quickly. It will not rub off even when wet. Gives dull, faded tires a non-glossy, like new finish. This paint is READY TO USE. (Part No: E844R)
$50.00

Seats
John Deere 4640 Pan Seat, Universal
Pan Seat, Universal
- 17 inch wide Gold zinc plated, 3-1/2 inch center to center on mounting holes, 1/2 inch by 1/2 inch center square. (Part No: B1865)
$54.12

John Deere 4640 Seat Belt
Seat Belt
- Universal Seat Belt. Can be adapted to many tractors. (Part No: RSB22)
$41.67

No
Picture
Seat Belt, Universal
- Seat belt, universal 2-point static adjustable belt. Fits TS1110 seats. (Part No: TS1110BELT)
$17.79

John Deere 4640 Seat, Air Suspension, Black Leatherette, Universal
Seat, Air Suspension, Black Leatherette, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with Black Leatherette upholstery, lumbar, recline tilt –up & angle adjust armrests. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. (Part No: TS5056V)
$1518.86

John Deere 4640 Seat, Air Suspension, Cloth, Universal
Seat, Air Suspension, Cloth, Universal
- Seat, Deluxe AG Air suspension, Includes 12 volt compressor. Slides, fore/aft & lateral isolators, adj shock, seat top with gray cloth upholstery, lumbar, recline tilt –up & angle adjust armrests. * Trimmed in FabriForm cloth, can be punctured with pens and screwdrivers and will not tear. *Adjustable backrest recline. *Infinitely adjustable mechanical lumbar support *Heavy duty 12 volt air compressor included. *DOUBLE LOCKING SLIDES, fore and aft isolators with lockout. *Ride firmness adjustment *Weight range 110-330 lbs. *** CALL FOR FREIGHT QUOTE *** (Part No: TS5056)
$1437.23

No
Picture
Seat, Industrial
- Seat assembly. Durable one-piece stamped steel pan. (Yellow) Leatherette upholstery, Dimensions: 18 inches wide, 19 inches high, 21 inches deep. (Mounting holes 9 inches wide x 9-3/4 inches deep). Fits several Commercial Turf/Mowers, Utility trucks, Fork Lifts, Skid Steer Loaders, Pavers, Sweepers, Construction Equipment, Utility tractors, Row crop tractors, Loader backhoes, Etc. (Part No: TS1110INDY)
$102.91

John Deere 4640 Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is Black. Additional $30 shipping due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1050ATSP)
$89.37

John Deere 4640 Seat, Universal
Seat, Universal
- BLUE Universal application leatherette suspension seat. For most compact, agricultural and industrial tractors. Adjustable base for 5 different mounting angles, internal suspension weight adjustment, special slotted base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, adjustable slide track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLUE. Add $15 additional shipping per seat due to size and weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1060ATSP)
$89.37

John Deere 4640 Seat, Universal
Seat, Universal
- Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is BLACK. (Part No: TS1075ATSP)
$82.25

John Deere 4640 Seat, Universal
Seat, Universal
- Seat assembly, black leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify Seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BK)
$111.23

No
Picture
Seat, Universal
- Seat assembly, blue leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110BL)
$113.74

No
Picture
Seat, Universal
- Seat assembly, yellow leatherette upholstery, dimensions: 18-3/4 inches wide, 19 inches high, 21 inches deep. Non-suspension type with slide track for forward/rear adjustment (slide track 9 inches wide x 11-1/4 inches deep). Backrest angle adjustment. ***IMPORTANT NOTE: Please verify seat and slide track dimensions listed above before ordering. Weight 33 pounds. (Part No: TS1110YL)
$110.68

John Deere 4640 Tie-On Seat Cover
Tie-On Seat Cover
- Yellow & Green, 19 inches wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R2602)
$37.80

John Deere 4640 Tie-On Seat Cover
Tie-On Seat Cover
- Yellow & White, 21 wide. Deluxe with 2 inches of foam. For tractors that use a PAN SEAT only. (Part No: R1014)
$37.80

John Deere 4640 Tie-On Seat Cover
Tie-On Seat Cover
- Green & White, 21" wide. Deluxe with 2 inches of foam. Fits only tractors that use a PAN type seat. (Part No: R1016)
$36.00

John Deere 4640 Universal Seat
Universal Seat
- Black leatherette upholstery. Narrow seat for compact tractors. Internal suspension, weight adjustable. 5 position adjustable base. Special slotted base for mounting. Seat is 15 inches wide, 17 inches long, 19 inches high to the back of the seat. (Part No: TS1015)
$182.49

John Deere 4640 Universal Seat
Universal Seat
- Universal Vinyl seat has Multiple mounting holes, ranging from 4 inch to 11 inch center to center (front to back) and 6-1/2 to 13 inch center to center (side to side). Customer needs to verify it will work for their tractor. Seat cushion width is 18 inches. An adapter plate may need to be made for some models. Slide track for forward/rear adjustment. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. (Part No: TS1100)
$113.34

John Deere 4640 Universal Seat
Universal Seat
- **YELLOW** Universal Application Leatherette Suspension seat. For most Compact, Agricultural and Industrial Tractors. Adjustable base for 5 different mounting angles, Internal Suspension Weight Adjustment, Special Slotted Base for mounting holes adjustments of approximately 2-1-2 inches forward/rear, Adjustable Slide Track. IMPORTANT: THESE SEATS FIT MOST TRACTORS, BUT NOT ALL. PLEASE LOOK CLOSELY AT THE DIMENSIONS ON THE PICTURE BEFORE ORDERING TO BE SURE IT WILL FIT YOUR TRACTOR. Color is John Deere Yellow. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: TS1040ATSP)
$82.25

Sheet Metal / Body Parts
John Deere 4640 2 Hour DVD - The How To of Sheetmetal Repair
2 Hour DVD - The How To of Sheetmetal Repair
- This DVD is intended to show how to restore sheetmetal on your tractor. A John Deere tractor is used in the demonstrations but the information is useful for all tractors. You can use this DVD as a tool to evaluate what work, cost, and time it is going to take to restore the tractor you own or are looking to purchase. 118 minutes. (Part No: RCR06-DVD)
$25.68

John Deere 4640 Battery Hold Down Bolt
Battery Hold Down Bolt
- These J-Bolts are 10 3/4 inches long with 5/16 inch 18 UNC thread. There is 2 inches of thread. Verify measurements before ordering. Replaces original part numbers 198185A1, 393161R1. (Part No: 198185A1)
$3.75

John Deere 4640 Cab Foam Kit Spray Adhesive
Cab Foam Kit Spray Adhesive
- 1 16 Oz. can will attach most kits. Large, multi piece kits may need 2 cans. (Part No: R0140)
$31.59

John Deere 4640 Fender Hand Grip
Fender Hand Grip
- Used on many ag tractors, combines, implements and industrial tractor applications. (Part No: R20759)
$6.45

John Deere 4640 Pilot Punch Set
Pilot Punch Set
- Set contains 12 sizes one of each 1/16, 3/32, 1/8, 5/32, 3/16, 7/32, 1/4, 5/16, 3/8, 7/16 and 1/2. (Part No: RPD112K)
$146.93

John Deere 4640 SAFETY STEP KIT
SAFETY STEP KIT
- Traction Where you need it. Great for use on tractor and combine steps, trailers, grain bin ladders and more. Kit includes 1 pint safety base and safety grit. (Part No: SSK14011)
$53.12

John Deere 4640 Toolbox, RED
Toolbox, RED
- This RED universal toolbox fits various tractor models. It measures 11 inches long, 4 inches wide, and 4 1/2 inches tall. The mounting holes must be drilled to match your tractor. (Part No: ABC308)
$41.99

John Deere 4640 Toolbox, Universal
Toolbox, Universal
- Universal Toolbox Approx. 16 1/4 Inches X 4 3/4 Inches X 5 Inches. This is a Universal Part and Color varies depending on availability. (Part No: R2685)
$33.29

Steering
John Deere 4640 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

John Deere 4640 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Part No: AE33538A)
$10.32

John Deere 4640 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$40.50

John Deere 4640 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

John Deere 4640 Steering Wheel Spinner, Black
Steering Wheel Spinner, Black
- Comes with mounting hardware. (Part No: R3276)
$7.08

John Deere 4640 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

John Deere 4640 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

John Deere 4640 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$8.86

John Deere 4640 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$8.75

Tools
No
Picture
Blade Fuse Assortment
- With 6-24 volt tester light and fuse puller. Contains 93 pieces. 5, 10, 15, 20, 25 and 30 amp blade type fuses. (Part No: S.29891)
$15.23

John Deere 4640 Chain Binder
Chain Binder
- 1/4 inch chain binder, 2600 pound load limit. (Part No: LL104)
$36.73

John Deere 4640 Chain Binder
Chain Binder
- 3/8 inch chain binder, 5400 pound load limit. Use with either 5/16 inch or 3/8 inch chain. (Part No: LL105)
$42.63

John Deere 4640 Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

John Deere 4640 Chain Binder
Chain Binder
- 1/2 inch chain binder, 9200 pound load limit. Use with either 3/8 inch or 1/2 inch chain. (Part No: LL106)
$79.85

John Deere 4640 Combination Wrench Set
Combination Wrench Set
- This combination wrench set is 11 pieces. Each wrench is made of chrome vanadium steel. This set comes in a handy storage rack and includes a LIFETIME UNCONDITIONAL WARRANTY. The SAE sizes range from 1/4 to 7/8 inch. (Part No: W1061)
$12.60

John Deere 4640 Cotter Pin Assortment
Cotter Pin Assortment
- This pin assortment contains 150 pieces, all in a convenient re-sealable plastic case. It includes sizes of: 1/8 inch x 2 inches, 5/32 inch x 2 1/2 inches, 3/16 inch x 3 inches, 1/4 inch x 2 inches, 1/4 inch x 3 inches, 5/16 inch x 2 1/2 inches. (Part No: W5206)
$10.76

John Deere 4640 Cotter Pin Assortment, Small
Cotter Pin Assortment, Small
- 560 piece assortment of 1/16 inch x 1 inch, 3/32 inch x 1 inch, 3/32 inch x 1-1/2 inches, 1/8 inch x 1-1/4 inches, 1/8 inch x 2 inches, 5/32 inch x 2-1/2 inches. All in convenient re-sealable plastic case. (Part No: W5205)
$6.80

John Deere 4640 Diesel Compression Test Kit
Diesel Compression Test Kit
- This diesel compression kit includes 9 adapters for popular Domestic, Asian, and European vehicles and comes in a protective case. With this kit you can test your compression through the glow plug or the injector holes. The Gauge reads from 0 to 1000 PSI (0-700kPA) and is rated at +/-2 for accuracy. It will fit the following thread sizes: 24 inches x 2 inches, 12 inches x 1 1/4 inches, 10 inches x 1 1/4 inches and 10 inches x 1 inch. (Part No: W89731)
$52.86

John Deere 4640 Digital Calipers, Stainless
Digital Calipers, Stainless
- High quality hardened stainless steel digital caliper. Calculates measurements up to 6 inches with SAE and METRIC conversions. Includes convenient carrying case and spare battery. (Part No: CAL6)
$29.21

John Deere 4640 GREASE GUN
GREASE GUN
- GREASE GUN. Pistol handle grease gun uses standard 11 inch grease cartridge. Develops 8000 lbs pressure. Pistol design makes it convenient to use. (Part No: GG3121)
$29.17

John Deere 4640 GREASE GUN
GREASE GUN
- Spring fed 11 inch barrel grease gun. Uses standard 11 inch grease cartridge. Lever handle develops 10, 000 lbs of pressure. (Part No: GG1080)
$20.66

John Deere 4640 GREASE GUN
GREASE GUN
- HEAVY DUTY Grease gun, ultimate gun designed specifically for heavy-duty use and is built to take extreme punishment. (Part No: GG11142)
$36.00

John Deere 4640 GREASE GUN CLAMP
GREASE GUN CLAMP
- Clamp holds all 2-1/4 inch diameter barrel hand guns. Bolts or screws anywhere through hole in bracket base. (Part No: GC102)
$11.21

John Deere 4640 GREASE GUN POWERLUBER 14.4V BATTERY
GREASE GUN POWERLUBER 14.4V BATTERY
- Battery, Replacement 14.4 Volt NI-CAD rechargeable battery for use with GGPL1442B & GGPL1444B PowerLuber grease gun. (Part No: GGPL1401)
$134.19