Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 420 Parts

Category: Steering

[Categories]   [All 420 Parts]   [All John Deere Models]  


John Deere 420 Drag Link
Drag Link
- Right hand threaded end, A= 3.12, B= .687. For tractor models M, 40, 320, 330, 420, 430, 435, 1010 (Also subs for AM498T). (Part No: AM496T)
$24.45

John Deere 420 Front Support Pivot Shaft
Front Support Pivot Shaft
- For MT, (40, 420, 430 all row crop). Front Support Pivot Shaft. (Part No: M4156T)
$107.46

John Deere 420 Spindle Bushing
Spindle Bushing
- Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Part No: T21539)
$10.79

John Deere 420 Spindle Dust Seal
Spindle Dust Seal
- This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2282T (Part No: M2282T)
$4.50

John Deere 420 Spindle Thrust Bearing
Spindle Thrust Bearing
- This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Part No: JD8407)
$8.69

John Deere 420 Spindle Thrust Washer
Spindle Thrust Washer
- This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2283T (Part No: M2283T)
$1.85

John Deere 420 Spindle, RH\LH
Spindle, RH/LH
- Measures A= 13.125", B= 1.374", C= 1.250", D= .750". For tractor models (1010 single row crop SN# 010001 to 042000), (40 SN# 69404 and up with standard axle), (320, 330, 420, 430 all with standard axles). The wheel bearing kit used on this spindle is kit part number WBKJD11. (Part No: AM2571T)
$195.44

John Deere 420 Steering Clutch Disc, Fiber
Steering Clutch Disc, Fiber
- Disc is 8.554 inches O.D. 26 Internal Teeth. (Part No: M3293T)
$28.82

John Deere 420 Steering Clutch Disc, Steel
Steering Clutch Disc, Steel
- Disc is 9.268 inches O.D., 6.380 inches I.D. 6 External Ears. (Part No: M872T)
$29.31

John Deere 420 Steering Clutch Pressure Plate
Steering Clutch Pressure Plate
- 8.5", 3 lever. For tractor models 1010, 40C, 420, 420 Crawler, 430 Crawler, 440, 440D, MC. Replaces AT11853, AM1930T, AT11486, AM987T, AP23494. (Part No: AT16121)
$210.20

John Deere 420 Steering Wheel
Steering Wheel
- 3 Spoke (covered). 18 inches in diameter. 11/16-3/4 shaft, keyed hub. Tractors 320 (SN# 325000 & up), 330, 420 (SN# 125000 & up with slant steering), 430, 435, 440. (Part No: TP-AM3914T)
$44.93

John Deere 420 Steering Wheel Cap
Steering Wheel Cap
- This 2 legged deer, correct cap for many covered steering wheels on JD models from 1968-2000. Fits a 2 7/16 inch opening. Replaces AL118173, AL155227, R47998 (Part No: AL155227)
$42.78

John Deere 420 Steering Wheel Cap
Steering Wheel Cap
- For tractor models 320, 330, (420 with slant steering to SN# 139999), 430, 435, (520 from SN# 5208100 with power steering), (530, 630, 730 with power steering), (830 2-cyl with power steering), (620 from SN# 6213100 with power steering), (720 from SN# 7214900 with power steering), (820 2-cyl from SN# 8203100 with power steering). Replaces AL155227, F3629R (Part No: R3859)
$65.55

John Deere 420 Steering Wheel Cap
Steering Wheel Cap
- For 320, 330, 420, 430, 435, 440, 520, 530, 620, 630, 720, 730, 820, 830 without Power Steering. Replaces OEM3630, F3630R (Part No: R4266)
$69.69

John Deere 420 Tie Rod
Tie Rod
- A= 11.125", B= .608". For tractor models 1010, (320, 330, 40, 420, 430, M all with std front axle). Replaces AM2001T. (Part No: AM3951T)
$84.00



John Deere 420 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

John Deere 420 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Part No: AE33538A)
$11.19

John Deere 420 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$44.46

John Deere 420 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

John Deere 420 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

John Deere 420 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$8.87

John Deere 420 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$8.85

John Deere 420 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$8.03

No
Picture
Wheelspinner-Ball Bearing
- Wheel Spinner, black knob, universal. WSV124B (Part No: R3276)
$7.64

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All 420 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy