Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 4010 Parts

Category: Fuel System / Air Intake

[Categories]   [All 4010 Parts]   [All John Deere Models]  


John Deere 4010 Adjustable Load Needle
Adjustable Load Needle
- Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off 90 degrees from the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 2.417 inches overall length, 1/2 - 20 thread size. (Part No: C71-59DC)
$41.40

John Deere 4010 Adjustable Load Nozzle Assembly
Adjustable Load Nozzle Assembly
- Used on John Deere tractors with the following Zenith carburetors: 12506, 12510, 12879, 13320, 13429, 13430, 13924. This needle assembly is used on carburetors with the shut off opposite of the air intake. If you have an electric shut off solenoid in this location on your carburetor, this part will replace it and convert it to manual shut off. 1.965 inches overall length, ``1/2 - 20 thread size. Replaces AR46109, H21058, R13069, R13070, AR13029 (Part No: AR46109)
$37.50

John Deere 4010 Air Cleaner Bowl
Air Cleaner Bowl
- Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794)
$6.26

No
Picture
Air Precleaner Bowl
- Clear plastic pre-cleaner bowl for air intake system. Dimension of bowl outside diameter at top: 10-1/2~ side height: 3~ cone inside diameter at top: 5-9/16~ overall height: 4. For diesel tractors: 4000, 4010, 4020, 5010, 5020 and 6030. For 4000, 4010, 4020, 5010, 5020, 6030 (Part No: TP-R28795)
$8.31

John Deere 4010 Basic Carburetor Kit with Diaphragm
Basic Carburetor Kit with Diaphragm
- Used on Marvel Schebler carburetors USX20, USX21, USX29, USX30, USX31, USX32, USX32-1, USX33, USX35, USX36, USX37, USX40, USX43, USX44, USX45SL, USX48SL, USX49SL this kit includes gaskets, needle, seat, throttle shaft (John Deere 3010 and 3020 only), and diaphragm. These carburetors were original equipment on some John Deere 4010, 4020, 3010 and 3020 tractors. Note, the throttle shaft in this kit is only used on USX21, USX31, USX36, USX49SL on 3010 and 3020 Tractors. (Part No: R0343)
$44.85

John Deere 4010 Carburetor Float
Carburetor Float
- For 3010, 3020, 4000, 4010, 4020. Carburetor Float for Zenith. (Part No: AH10620)
$18.75

John Deere 4010 Carburetor Gasket Set
Carburetor Gasket Set
- Used on carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For 3010, 3020, 4010, 4020. (Part No: CGK41)
$3.31

John Deere 4010 Carburetor Kit, Complete
Carburetor Kit, Complete
- This Carburetor Kit is for Zenith Carbburetor numbers: 13320, 13326, 13430, 13450, 14990 (6-Cyl JD Only), 15099 (6-Cyl JD Only), 15108 (JD Only) - Includes Basic Kit, plus Fuel & Air Adjusting Screws & Jets (Part No: R8301)
$103.50

John Deere 4010 Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This Comprehensive Carburetor Kit is for For Zenith Carburetor numbers: 13320, 13326, 13450, 14990 (6-Cyl JD Only), 15099 (6-Cyl JD Only), 15108 (JD Only). The kit contains all the parts shown. (Part No: R8303)
$207.00

John Deere 4010 Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This Comprehensive Carburetor Kit is used on Zenith Carburetor number 13430. The Kit contains all the parts shown. (Part No: R8305)
$207.00

John Deere 4010 Carburetor Repair Kit
Carburetor Repair Kit
- Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Carburetor manufacture number USX-20~ tractor manufacture carburetor numbers AR34244R, AR10110R. For tractor models: 4010, 4020. For 4010, 4020 (Part No: BK371V)
$38.30

John Deere 4010 Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: USX20, USX21, USX30, USX31, USX35, USX36, USX48. For the following tractor models: 3010, 3020, 4010, 4020. Add $100.00 core charge to price (will be added after order is placed when ordering online) and you will receive instructions for returning your core for a refund if you have one available. (Part No: 1532-CARB)
$415.00

John Deere 4010 Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: 12510, 12879, 13320, 13429, 13430. For the following tractor models: 3010, 3020, 4010, 4020. The Center-to-Center measurement on the mounting bolts is 3 3/8 inches. Add $200.00 core charge to price (will be added after order is placed when ordering online)- you will receive instructions for returning your core for a refund if you have one available. (Part No: 1534-CARB)
$290.50

John Deere 4010 Fuel Filter
Fuel Filter
- Fuel filter element, cartridge type, for diesel tractors with dual filters. 0.750 inches inside diameter, 3.371 inches outside diameter, 4.122 inches tall. Models: 70, 730, 4020, 600, R, 80, 720, 820, 830, 3010, 3020, 4000, 4010, 840, 4520, 5020. Replaces AR28611, AR344R, AR44077 (Part No: TP-AR44077)
$10.95

John Deere 4010 Fuel Injector
Fuel Injector
- For tractor models JD 3010, 3020, 4010, 4020 model tractors with injector #20494. Replaces AR39811, AR46846, AR50781, SE501163. (Part No: AR50781)
$34.77

John Deere 4010 Fuel Pump
Fuel Pump
- Fuel transfer pump, for gas or diesel engines. Tractors: 3010, 4010. Replaces AR26672, AR26675, AR40508, AR40509, AR53567, RE36904. (Part No: RE43273)
$42.00

John Deere 4010 Fuel Shut-Off Valve
Fuel Shut-Off Valve
- This new Fuel Tap is used on John Deere Tractors 820, 830, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2120, 2130, 2140, 2240, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 3030, 3040, 3120, 3130, 3140, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 5010, 5020, 6030, 7020. John Deere Industrial: 500, 500A, 570B (serial number 546411 and up), 600, 670B (serial number 546411 and up), 672B (serial number 546411 and up), 690D, 690DR, 693D, 760, 770B (serial number 546411 and up), 772B (serial number 546411 and up). John Deere Harvesters: 5200, 5400, 5460, 5720, 5820. Measures 1/4 inch NPT inlet, 5/16 inch flare outlet, 3.415 inch overall length. Replaces AR26435, R32508, AE43474, R34656 (Part No: R34656)
$12.95

John Deere 4010 Fuel Tank
Fuel Tank
- For tractor models 4000, 4010, 4020. Fuel Tank made of Poly Type Material. SEAL IS NOT AVAILABLE. Replaces AR39587 (Part No: AR38576)
$448.50

John Deere 4010 Fuel Tank Cap
Fuel Tank Cap
- For tractor models 1020, 1520, 2010, 2020, 2030, 2440, 2510, 2520, 2630, 2640, 300B, 3010, 301A, 302, 3020, 302A, 310A, 310B, 4000, 4010, 401B, 401C, 401D, 4020, 4030, 4040, 4050, 410, 4230, 4240, 4250, 4320, 4430, 4440, 4450, 4520, 4620, 4630, 480C, 5010, 300, 301, 310, 380, 400, 401, 440, 440A, 440B, 480, 480A, 480B, 500, 500A, 500B, 600. (Part No: AT20911)
$8.84

John Deere 4010 Grommet, Fuel Filler, Black
Grommet, Fuel Filler, Black
- For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diamter, and 3 1/2 inch diamter on underside lip. (Part No: A5157R)
$19.95

John Deere 4010 Grommet, Fuel Filler, Red
Grommet, Fuel Filler, Red
- For tractor models 820 (3 cyl.), 1010, 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4230, 4240, 4320, 4430, 4440, 4520, 4620, 4630, 5010. Replaces R39613R, R82873, R34193. Fits around the fuel filler neck and acts as a insulator between the fuel neck and the hood. 2.295" I.D. and 3.965" O.D. Nitrile butadiene rubber (NBR). (Part No: R39613R)
$18.75

John Deere 4010 Precleaner Cover, Metal
Precleaner Cover, Metal
- 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R)
$26.48

John Deere 4010 Speed Control Rod End Joint
Speed Control Rod End Joint
- Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Part No: AA5302R)
$9.23

John Deere 4010 Throttle Knob
Throttle Knob
- Plastic. For tractor models 1010, 2010, 2510, 2520, 3010, 3020, 4000, 4010, 4020, 4320, 4520, 5020, 7020. (Part No: R26670)
$7.88

John Deere 4010 Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13



John Deere 4010 Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

John Deere 4010 Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.98

John Deere 4010 Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$5.24

John Deere 4010 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$3.90

John Deere 4010 Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

John Deere 4010 Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

John Deere 4010 Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$56.83

No
Picture
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.90

John Deere 4010 Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Part No: FTW494)
$4.13

John Deere 4010 Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.50

John Deere 4010 Main Load Adjusting Needle Assembly
Main Load Adjusting Needle Assembly
- Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Part No: CT43-622)
$37.50

John Deere 4010 Marvel-Schebler Service Manual
Marvel-Schebler Service Manual
- This Service manual is a complete manual for all DLTX and TSX model carburetors. Comes with tractor carburetor principle of operation and overhaul step-by-step instructions. 21 Pages. (Part No: MAR_CARB_SV)
$9.95

John Deere 4010 Pre Cleaner Assembly, Turbo 6 Inch
Pre Cleaner Assembly, Turbo 6 Inch
- By removing larger particles, these pre-cleaners will not only prolong serviceability of expensive air filters but minimize machinery downtime as well as extending engine life. Intake: 6 inch. Suitable for engines up to 450 HP. This is a universal part sold by size and not specified for any particular model. Please verify measurements before ordering. (Part No: TPC6)
$194.39

John Deere 4010 Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

John Deere 4010 Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$8.19

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories]   [All 4010 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy