Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 3350 Parts

Category: Steering

[Categories]   [All 3350 Parts]   [All John Deere Models]  


John Deere 3350 Center Steering Arm Pin Bushing
Center Steering Arm Pin Bushing
- Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Part No: JD10137)
$24.41

John Deere 3350 Differential Pinion Bearing
Differential Pinion Bearing
- Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diamter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Part No: VPJ2550)
$42.69

John Deere 3350 Hub Seal
Hub Seal
- Used on ZF Mechanical For Wheel Drive hubs, this seal measures 5.374 inches inside diameter, 6.516 inches outside diameter and 0.507 inches wide. Replaces AL68616, ZP0750110156, 1964236C1, 81867542, 83946555. (Part No: AL68616)
$48.73

John Deere 3350 Hub Seal, Outer
Hub Seal, Outer
- Used on many MFWD (mechanical four wheel drive) front ends, this seal has an Inside Diameter of 1.814 inches, Outside Diameter of 2.568 inches, and Width of 0.671 inches. It replaces OEM numbers 1429645, 81288C1, 81288C3, 83959483, ZP0750110134, AL61448, AL39338, 31372000, V31372000 (Part No: ZP0750110134)
$16.70

John Deere 3350 Hub, Front Wheel, 6 bolt
Hub, Front Wheel, 6 bolt
- Fits 1020, 1520, 1640, 1840, 1950N, 2020, 2030, 2040, 2040S, 2150, 2155, 2250, 2251N, 2350, 2355N, 2440, 2450, 2510, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 300B, 300D, 301A, 302, 302A, 3040, 310 (SN# 237997 & below), 3130 (SN# 186270 & above), 3140, 3150 (STD Duty), 3230, 3350 (Std Duty), 4000 (SN# 201000 & above), 401B, 401C, 4020 (SN# 201000 & above), 4030, 4040, 4230, 4240, 4430, 6403, 7405, 300, 301, 310, 380, 400, 401, 480, 480A, and 480B. Replaces the part number R49839. Uses wheel bolt part number WB916. Uses a press in cap part# R50992. (Part No: R49839)
$57.96

John Deere 3350 Oil Seal
Oil Seal
- Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Part No: AL32888)
$3.98

John Deere 3350 Orbital Steering Unit Seal Kit
Orbital Steering Unit Seal Kit
- Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Part No: 1810503M92)
$32.91

John Deere 3350 Planetary Ring Gear
Planetary Ring Gear
- Used on ZF Axle Mechanical Four Wheel Drive. This planetary ring gear is 8.14 inches outside diameter and has 90 teeth. Used on John Deere 2140 serial number 430000 and up, 2750, 2950, 2955 before serial number 765517, 3040 serial number 430000 and up, 3055, 3140 serial number 430000 and up, 3150, 3155, 3255. Replaces part numbers ZP4472353076, L40010, 83934014, E2NN1N043EA, VPJ7844 (Part No: L40010)
$420.00

John Deere 3350 Spindle Bushing
Spindle Bushing
- Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Part No: T21539)
$10.79

John Deere 3350 Spindle Dust Seal
Spindle Dust Seal
- This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2282T (Part No: M2282T)
$4.50

John Deere 3350 Spindle Thrust Bearing
Spindle Thrust Bearing
- This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Part No: JD8407)
$8.69

John Deere 3350 Spindle Thrust Washer
Spindle Thrust Washer
- This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820(3 Cyl.), 830(3 Cyl.), 940. Replaces M2283T (Part No: M2283T)
$1.85

John Deere 3350 Spindle Thrust Washer
Spindle Thrust Washer
- This Spindle Thrust Washer measures 1 3/4 inches inside diameter, 3 inches outside diameter. Two are used per spindle, 4 per tractor. Sold individually. (Part No: R49838)
$6.36

John Deere 3350 Steering Arm Bushing
Steering Arm Bushing
- Measuring 1.440 inches outside diameter and 1.259 inches inside diameter, this steering arm bushing is used on John Deere Tractor models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2240, 2255, 2350, 2440, 2550, 2640, 2750, 3030, 3350, 830, 840, 940 and John Deere Industrial models: 300, 300B, 301, 301A, 302, 302A, 310, 310A, 310B, 380, 400, 401, 401B, 401C, 401D, 410, 480, 480A, 480B, 480C, 500, 500C. Replaces L62839, L58547, T23118 (Part No: T23118)
$10.98

John Deere 3350 Tie Rod Assembly - Left
Tie Rod Assembly - Left
- For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Left Hand. (Part No: AL69818)
$272.29

John Deere 3350 Tie Rod Assembly - Right
Tie Rod Assembly - Right
- For tractor models 2955, 3050, 3055, 3155, 3255, 3350, 3650. Tie Rod Assembly - Right Hand. (Part No: AL69819)
$279.35

John Deere 3350 Tie Rod Center
Tie Rod Center
- Measuring 9 inches overall with M24 X 1.5 right hand thread on one side and M28 X 1.5 right had thread on the other, this part is used on John Deere 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650. This part replaces AL168703, AL68253. It used with AL68254 and AL68255. (Part No: AL68253)
$100.12

John Deere 3350 Tie Rod End Left Side
Tie Rod End Left Side
- Used on John Deere 3050 and 3350 with mechanical four wheel drive and heavy duty ZF APL Axle, this tie rod end is 11.750 inches long with M24 x 1.5 right hand thread. (Part No: AL69816)
$164.24

John Deere 3350 Tie Rod End. Left Side
Tie Rod End. Left Side
- This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces AL58013, AL168705 (Part No: AL58013)
$118.36

John Deere 3350 Tie Rod End. Right Side
Tie Rod End. Right Side
- This Tie Rod End is 11.750 Inches long from the center of the post to the end of the tube. It has M24 X 1.5 Right Hand Thread. It is used on (2140, 2750 Axle Serial number 024906 and up), (2950, 3040, 3140 Axle Serial Number 026317 and up), 3050, 3350. Replaces (Part No: AL58014)
$117.81

John Deere 3350 Tie Rod, Left Side
Tie Rod, Left Side
- This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3050, 3055, 3150, 3155, 3255, 3350, 3640, 3650, (3040, 3140 ALL WITH MFWD Serial Number 430000 and up) Replaces AL168701, AL68254 (Part No: AL68254)
$97.64

John Deere 3350 Tie Rod, RH Thread, 4WD
Tie Rod, RH Thread, 4WD
- This Tie Rod is 8.250 inches long. It has - M22 X 1.5 R/H Threads on one side and - M24 X 1.5 R/H Threads on the other. It is used on John Deere 2140, 2750, 2950, 3040, 3050, 3140, 3350, 210C, 300D, 310C, 310D, 315C, 315D, 410C, 410D, 482C, 510C, 510D, 610C. It Replaces AL60161, AL39316, AL178074, AL55011 (Part No: N14377)
$73.37

John Deere 3350 Tie Rod, Right Side
Tie Rod, Right Side
- This This Tie Rod Is 10.750 inches overall and has - M28 X 1.5 Right Hand Threads. It fits the following tractors with MFWD 2955, 3040, 3050, 3055, 3140, 3150, 3155, 3255, 3350, 3640, 3650 (Part No: AL68255)
$111.60



John Deere 3350 Eaton Power Steering Pump Replacement
Eaton Power Steering Pump Replacement
- This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Part No: S03-1003)
$384.33

John Deere 3350 Filter, Power Steering
Filter, Power Steering
- Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Part No: AE33538A)
$11.19

John Deere 3350 Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$44.46

John Deere 3350 Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

John Deere 3350 Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

John Deere 3350 Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$8.87

John Deere 3350 Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$8.85

John Deere 3350 Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$7.20

No
Picture
Wheelspinner-Ball Bearing
- Wheel Spinner, black knob, universal. WSV124B (Part No: R3276)
$7.64

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All 3350 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy