FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 302 Parts

Category: Hitch / Drawbar

[Categories] [All 302 Parts] [All John Deere Models]

Center Link Assembly - Includes link body, front and rear ends, and handle. For tractor models JD301, JD401, 1020, 1520, 2020, (300B, 302A, 401C SN# up to 362024), (2440, 2640 SN# up to 340999), (301A, 302, 401B SN# up to 362024), (401D with non telescoping draft links). Replaces: T22028, AT19795, AT19796 and T22008. (Item #: 164847, Ref: AT20863) $153.00

Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203) $62.00

Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016) $7.60

Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849) $7.30

Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Item #: 118291, Ref: T21559) $10.80

Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Item #: 162626, Ref: AR55695) $8.70

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min / Max Length: 21-1/2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Item #: 121432, Ref: AR44554) $83.00

Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Item #: 170398, Ref: T22399) $9.70

Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Item #: 176718, Ref: T21558) $24.22

Load Control Shaft - This Load Control Shaft measures 19.69 inches long and .815 Diameter. Also replaces T26598. 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1530, 1550, 1650, 1750, 1850, 2040, 2150, 2155 serial number 651779 and earlier, 2240, 2255, 2355, 300, 300B, 301, 301A, 302, 302A Replaces John Deere OEM nos L26932, T26598 (Item #: 122137, Ref: L26932) $52.80

$John Deere 302 Pull Arm, Heavy Duty, Cat II, RH\LH$
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Item #: 111387, Ref: AR77530) $304.00

Sway Block Bracket, Left Hand - This Left Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20168 (Item #: 111974, Ref: AT20168) $39.60

Sway Block Bracket, Right Hand - This Right Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20167 (Item #: 111975, Ref: AT20167) $41.40

Sway Block, LH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108953, Ref: T30277) $42.80

Sway Block, RH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108949, Ref: T30276) $42.90

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $12.70

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.50

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.30

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.90

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Item #: 161847, Ref: AL40957) $22.90

Valve Seat Insert, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Item #: 173513, Ref: T28538) $22.40

Valve Spool, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Item #: 151029, Ref: R54969) $21.70

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $9.20

$John Deere 302 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

$John Deere 302 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

$John Deere 302 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$John Deere 302 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $42.10

$John Deere 302 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

$John Deere 302 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

$John Deere 302 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $132.00

$John Deere 302 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

$John Deere 302 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $75.91

$John Deere 302 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

$John Deere 302 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $284.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.10

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $45.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $55.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $64.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $60.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $36.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $337.00

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $330.00

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.90

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.40

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $62.00

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.30

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 302 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy