Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 3010 Parts

Category: Hydraulic System

[Categories]   [All 3010 Parts]   [All John Deere Models]  


John Deere 3010 Front Hydraulic Pump Drive Clamp Half
Front Hydraulic Pump Drive Clamp Half
- This Coupler Half measures 5.142 inches overall length, 2 inches wide and has 3/8-16 NC threaded hole. Two used per tractor. Sold individually. If bushings are needed, order R45822 separately. (Part No: R34362)
$16.55

John Deere 3010 Hydraulic Pump Seal & O-Ring Kit
Hydraulic Pump Seal & O-Ring Kit
- 40cm^3, 50cm^3 with serial plate, this kit is used on pumps that require the teflon sealing washer rather than the quad ring with backup washer, pump models EA1, GA1, GH1. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, (5020 SN# up to 0249999), 7020, 7520, 1830, 2130, 2030, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2350, 2550, 3150, 4050, 4250, 4350, 4450, 2155, 2355, 2555, 2955, 3055, 3155, 3255, 4055, 4255, 4455. (Part No: RE29107)
$61.89

John Deere 3010 Hydraulic Pump Seal & O-Ring Kit
Hydraulic Pump Seal & O-Ring Kit
- 39cm^3, 49cm^3 pump less serial plate. This kit is used on pumps that require the quad ring with backup washer rather than the teflon sealing washer. For tractor models 2510, 3010, 4010, 5010, 3020, 4020, 4320, 4520, 4620, (5020 up to SN# 024999), 7020, 7520, 1830, 2030, 2130, 2630, 3030, 3130, 4030, 4230, 4430, 4630, 1640, 1840, 2040, 2040S, 2140, 2440, 2640, 2840, 2940, 3140, 4040, 4240, 4440, 4640, 4840, 2750, 2950. (Part No: RE29103)
$61.73

John Deere 3010 Hydraulic Pump Stroke Control Valve
Hydraulic Pump Stroke Control Valve
- For tractor models 2030, 2155, 2355, 2440, 2510, 2520, 2555, 2630, 2640, 2755, 2840, 2855N, 2940, 2955, 3010, 3020, 3055, 3155, 3255, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450, 4455, 4560, 4640, 4760, 4840, 4850, 4960, 5010. Replaces R70559, AR64604, R55464, R65192, R65193, R65194. (Part No: RE10712)
$40.84

John Deere 3010 Hydraulic Pump, New
Hydraulic Pump, New
- 3 cubic inch, serialized pump, has two 1-1/16" inlet ports located directly across from each other. For tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2030, 2040, 2130, 2140, 2155, 2250, 2350, 2355, 2440, 2450, 2510, 2520, 2550, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3010, 3020, 3030, 3040, 3050, 3055, 3130, 3140, 3150, 3155, 3350, 3650, 4000, 4010, 4020, 4030, 4040, 4050, 4055, 4230. (Part No: AR94660)
$959.10

John Deere 3010 Hydraulic Pump, Remanufactured
Hydraulic Pump, Remanufactured
- For tractor models 300, 300B, 302A, 310, 310A, 310B, 400, 401, 401C, 440, 440A, 440B, 440C, 444, 500, 500A, 500B, 510, 540, 540A, 540B, 544, 544A, 544B, 570, 570A, 600, 640, 644, 644A, 644B, 646, 646B, 700A, 760, 760A, 2130, 3010 Relief Style, 3030, 3130, 4010 Relief Style, 4020, 4040, 4240, 4440, 5010 Relief Style. Hydraulic Pump, Remanufactured. A REFUNDABLE CORE CHARGE OF $300.00 will be added to your order. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. Top Inlet is 7/8 inches, Left Inlet is 1 1/16 inches, Discharge is 7/8 inches. (Part No: AR56160-R)
$1205.86

No
Picture
Lower Lift Housing
- For 3010, 3020, 4010, 4020 (To S#200999) (Part No: R3118)
$113.86

No
Picture
Upper Lift Housing
- For tractor models 3010, 3020, 4010, 4020 (To S#200999). (Part No: R3885)
$125.24



John Deere 3010 Hydraulic Pump Mounting Bracket
Hydraulic Pump Mounting Bracket
- This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8" diameter, 4-3/16" center to center. Also 2 foot mount holes 3/8" diameter, 5" center to center. Center pilot hole 3-1/4" diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Part No: 33020-1)
$147.00

John Deere 3010 PTO Mounted Hydraulic Pump
PTO Mounted Hydraulic Pump
- For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommednded hose sizes 1 1/4 inlet, 3/4 outlet. (Part No: HC-PTO-1A)
$953.75

John Deere 3010 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$12.75

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All 3010 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy