FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 2640 Parts

Category: Hitch / Drawbar

[Categories] [All 2640 Parts] [All John Deere Models]

Bushing, Load Control - For John Deere tractor models 1640, 1830, 1840, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2350 (s/n 529511-earlier), 2550 (s/n 529511-earlier), 2640 (s/n 341000-later), 2750 (s/n 529511-earlier), 2840, 2940, 2950 (s/n 531761-earlier), 3030, 3040, 3120, 3130, 3140, Compatible with John Deere Construction and industrial models 300B (s/n 715671-later), 301A (s/n 715671-later), 401D (s/n 715671-later), Replaces John Deere OEM number T28548, (Item #: 170425) $5.30

Center Link Assembly - Includes link body, front and rear ends, and handle. For tractor models JD301, JD401, 1020, 1520, 2020, (300B, 302A, 401C SN# up to 362024), (2440, 2640 SN# up to 340999), (301A, 302, 401B SN# up to 362024), (401D with non telescoping draft links). Replaces: T22028, AT19795, AT19796 and T22008. (Item #: 164847, Ref: AT20863) $153.00

Center Link Handle - For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number T22008, (Item #: 170313) $16.80

Complete Non-Adjustable Lift Link Assembly - Left Hand - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 300, 300B, 301, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number R48595, T25836, Fit left hand side, Rod Length: 21-3/4", Min / Max Length: 24" / 31", For assembly with 17.5" rod use Item #: 111346, (Item #: 130489) $91.00

Draft Link Pull Arm, Used - For John Deere tractor models 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2010, 2020, 2030, 2120, 2240, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT30151, Length: 31", Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498803) $286.01

Drawbar - Straight 1.250 x 2.50 x 36.750.781 Holes at 1.125, 2.750, and 8.578 For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2240, 2350, 2355, 2550, 2630, 2640, 2750, 2755, 2855. Replaces R61126 (Item #: 110255, Ref: R3092) $107.00

Drawbar Front Support - This Front Drawbar Support fits multiple John Deere models. It will replace original part number T21672 if you also use L32016 Front Drawbar Pin and L31849 Front Drawbar Pin Adapter. It replaces original part number AL27203 (Item #: 155460, Ref: AL27203) $62.00

Drawbar Front Support Pin - This Drawbar Front Support Pin fits multiple John Deere Models. It can replace AT19850 when you also replace AL27203 Support and L31849 Pin Adaptor. (Item #: 155461, Ref: L32016) $7.60

Drawbar Front Support Pin Adapter - This Drawbar Front Support Pin Adapter fits multiple John Deere Models. It is used in conjunction with L32016 Pin and AL27203 Bracket to update older style front draw bar supports. (Item #: 155462, Ref: L31849) $7.30

Drawbar Hammer Strap - .75" thick. For tractor models 1020, 1250, 1450, 1530, 1650, 2010, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855N, 5105, 5200, 5205, 5210, 5220, 5300, 5310, 5320, 5320N, 5400, 5410, 5420, 5420N, 5500, 5510, 5520, 5520N, 820 3 cylinder, 830 3-cylinder. (Item #: 159136, Ref: T29899) $85.00

Drawbar Pin - This Drawbar Pin is used on John Deere 820, 920, 1020, 1120, 1520, 2020, 2120, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 300B. It replaces AT19850 (Item #: 155271, Ref: AT19850) $35.20

Drawbar, Offset - 2.250 Offset 1.25" x 2.50" x 36.625" (.781 Holes at 1.125, 2.750, and 8.575") For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 1640, 1641, 1830, 1840, 2020, 2030, 2040, 2130, 2140, 2141, 2240, 2250, 2251, 2350, 2351, 2355, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2651, 2750, 2755, 2850, 2855, 820, 830. ADDITIONAL $15 SHIPPING DUE TO WEIGHT. Drawbar pin available as part# L32016. (Item #: 108511, Ref: L29020) $136.00

No
Picture
Front Drawbar Pin Adapter, Used - For John Deere tractor models 820, 830, 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641F, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300B, 302, 302A, 401B, 401C, 401D, Replaces John Deere OEM number L31849, For a new version of this item use Item #: 155462, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 436163) $4.01

Front Pull Arm, Left Hand - Left Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640 (Item #: 160666, Ref: AT30151) $367.00

Front Pull Arm, Right Hand - Right Hand - Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2440, 2630, 2640. (Item #: 128486, Ref: AT30150) $380.00

No
Picture
Housing Assembly - 15 Long - Adjustable Consists of: R3104, R3106, R3110, R3111, R3112, R3119, and R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Item #: 109393, Ref: R3109) $124.00

No
Picture
Housing Assembly - 17.50 Long - Adjustable Consists of: R3104, R3105, R3110, R3111, R3112, R3119, and R3120 For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255 (Item #: 111632, Ref: R3108) $143.00

Hydraulic Lift Arm, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2355N, 2440, 2630, 2640, 2755, 2855N, Replaces John Deere OEM number T29931, For a new version of this item use Item #: 125402, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 425402) $93.01

Leveling Arm Pin - Used for attaching the leveling arms to the upper lift arms, this Pin is used on John Deere models 820, 830, 840, 920, 930, 940, 1020, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840 serial number 429999 and below, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2250, 2350, 2355, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2750, 2755, 2840, 2850, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3350. (Item #: 121437, Ref: AT21754) $15.10

Leveling Arm Screw - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Leveling Arm Screw is 17.50 inches long. Replaces T25835 (Item #: 165768, Ref: T25835) $19.10

Leveling Arm Screw - Measuring 15.187 inches over all length, this Leveling Arm Screw is used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces T24908 (Item #: 110317, Ref: T24908) $15.10

Leveling Assembly Housing - Used with telescoping 3pt pull arms, the rod on this Housing Assembly is 15.00 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-15, L2837415 (Item #: 109393, Ref: L2837415) $124.00

Leveling Assembly Housing - Used with non-telescoping 3pt pull arms, the rod on this Housing Assembly is 17.50 inches long. Used on John Deere models: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255. Replaces L28374-17, L2837417 (Item #: 111632, Ref: L2837417) $143.00

Leveling Box Handle - Used on tractors with telescoping 3-point pull arms, this part replaces John Deere part number T21559, T28346 (Item #: 118291, Ref: T21559) $10.80

Lift Arm Pin - This Lift Arm pin is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It replaces original part number AR55695, T22714 (Item #: 162626, Ref: AR55695) $8.70

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable with 17.50" (hole-to-hole) lift link rod. Fits 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 156785, Ref: AR44556) $71.00

Lift Link Assembly, Left Hand - Left Hand - Non-Adjustable (while in use). Min / Max Length: 21-1/2 inches - 28 inches. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. Replaces AR44554, T25836, R48595, T21901 (Item #: 121432, Ref: AR44554) $83.00

Lift Link Assembly, Right Hand - Right Hand. 15 inch rod length. Closed length 21-1/4" Extended length 27-1/2" For tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. R48595, RE16370, T24908 (Item #: 108552, Ref: AR44552) $155.00

Lift Link Assembly, Right Hand - Right Hand. 17.5" rod length Closed Length: 23" Extended Length: 29-1/2". Housing Assembly. For: 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 3055, 3155, 3255. (Item #: 150871, Ref: AR44551) $121.00

Lift Link Ball - Used on John Deere models: 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1950, 2020, 2030, 2040, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3255, 400, 401, 401B, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T22399 (Item #: 170398, Ref: T22399) $9.70

Lift Link Housing Shaft - Used in the housing of the adjustable leveling are assembly, this part fits John Deere models 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641F, 1750, 1830, 1850, 1950, 2020, 2030, 2040, 2120, 2130, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 300, 300B, 301, 301A, 302, 302A, 3055, 3150, 3155, 3255, 400, 401, 401B, 401C, 401D, 820, 830, 840, 920, 930, 940. This part replaces John Deere part number T21558 (Item #: 176718, Ref: T21558) $24.22

Lift Link Rod - Used on the non-adjustable lift arm, this Lift Link Rod measures 19.125 inches overall. It includes T21901 Lift Rod Ball. (Item #: 110530, Ref: T24909) $82.00

Lift Link Rod - For John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lift Link Rod, comes with T21901 Lift Rod Ball. The overall length is 21.750 inches long. (Item #: 109389, Ref: T25836) $92.00

No
Picture
Lift Link Rod - 17 1/2 Long For Non-Adjustable Lift Link For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755 (Item #: 110530, Ref: R3113) $82.00

Lift Link Rod, Used - For John Deere tractor models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Construction and industrial models 300, 301, 302, 400, 401, Replaces John Deere OEM number L28372, T24909, Includes Ball (T21901), For use with Non-Adjustable Lift Links, 19-1/4" Long, For a new version of this item use Item #: 110530, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 410530) $40.01

Load Control Shaft - For John Deere tractor models 301, 1350, 1550, 1640, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2155, 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2850, 2855, 2855N, Compatible with John Deere Construction and industrial models 300B, 301A, 401D, Replaces John Deere OEM number L41787, (Item #: 155106) $99.00

Load Control Shaft - For John Deere tractor models 1640, 1830, 1840, 2030, 2040, 2040S, 2130, 2140, 2350, 2550, 2640, 2750, Replaces John Deere OEM number L31199, (Item #: 160352) $60.00

Load Control Shaft - For John Deere tractor models 2630, 2640, Replaces John Deere OEM number R54217, Diameter: .930", Length: 19.440", (Item #: 164412) $237.00

Load Control Washer - For John Deere tractor models 1550, 1640, 1750, 1830, 1840, 1850, 1850N, 2030, 2040, 2040S (s/n 429999-earlier), 2130, 2140, 2155, 2350, 2355, 2355N, 2550, 2555, 2640 (s/n 341000-later), 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955 (s/n 765516-earlier), 3030, 3040, 3055, 3130, 3140, 3150, 3155, 3255, Compatible with John Deere Construction and industrial models 300B, Replaces John Deere OEM number L41154, (Item #: 165796) $1.70

Load Sensing Bushing - For John Deere tractor models 1350, 1550, 1640, 1641, 1641F, 1750, 1830, 1840, 1850, 1950, 1950N, 2030, 2040, 2040S, 2130, 2140, 2141, 2155, 2250, 2251, 2251N, 2350, 2351, 2355, 2355N, 2450, 2541, 2550, 2555, 2640, 2650, 2650N, 2651, 2750, 2755, 2840, 2850, 2855, 2855N, 2940, 2941, 2950, 2951, 2955, 3030, 3040, 3050, 3055, 3130, 3140, 3141, 3150, 3255, 3340, 3350, 3351, 3641, 3651, Replaces John Deere OEM number L41788, (Item #: 129288) $14.10

Lower Lift Arm Ball - Measuring 3/4 inch inside diameter, 1 3/16 inch outside diameter, and 1 3/8 inch wide. This part replaces John Deere part number T21901. Used on John Deere 1020, 1530, 2020, 2030, 2040, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2640, 2750, 2755, 2855N, 2940, 2950, 3030, 3055, 3150, 3155, 820, 830 (Item #: 112054, Ref: T21901) $10.60

Lower Lift Yoke - Used on John Deere models 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this Lower Lift Casting replaces John Deere part number R48595 (Item #: 111346, Ref: R48595) $43.00

Lower Lift Yoke Plate - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1641, 1750, 1830, 1840, 1850, 1850N, 1950, 1950N, 2010, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2141, 2150, 2155, 2240, 2250, 2251, 2255, 2350, 2351, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, 2941, Replaces John Deere OEM number T21759, (Item #: 164883) $4.90

Lower Link Adapter Nut - Used on telescoping lower lift arms, this is a 1-5/8 inch adapter nut. It replaces John Deere part number T21758 (Item #: 173022, Ref: T21758) $16.65

No
Picture
Pull Arm - Left or Right Hand Heavy Duty - Non-Telescoping Style For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2550, 2555, 2630, 2640, 2750, 2755, 2855 (Item #: 111387, Ref: R3128) $304.00

$John Deere 2640 Pull Arm, Heavy Duty, Cat II, RH\LH$
Pull Arm, Heavy Duty, Cat II, RH/LH - 33.50" Center to center. Hole towards center is not as pictured. For tractor models JD301, JD400, 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 302, 401B, 401D, 820, 830, 300B, 302A, 401C. Replaces AT19849. (Item #: 111387, Ref: AR77530) $304.00

Rear Pull Arm, Telescoping - Left or Right Hand Telescoping Style. For 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2350, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2855, 301A, 3010, 3020, 4000 and 4020 (SN# 201000 and above), 4030. Also replaces OEM# AL24137. (Item #: 108900, Ref: AR28570) $155.00

Rockshaft Housing Retainer - For John Deere tractor models 820 (3 Cyl.), 830 (3 Cyl.), 840, 920, 930, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number T21615, (Item #: 161844) $6.90

Spring Clamp - For John Deere tractor models 830 (3 cyl.), 840, 930, 940, 1020 (s/n 183987-later), 1030, 1035, 1040, 1120 (s/n 183987-later), 1130, 1140, 1350, 1530, 1550, 1630, 1635, 1640, 1750, 1830, 1840, 1850, 1950, 1950N, 2020 (s/n 039087-later), 2030, 2035, 2040, 2040S, 2120 (s/n 039087-later), 2130, 2135, 2140, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2450, 2550, 2555, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2950, 2955, 3030, 3040, 3050, 3055, 3120, 3130, 3135, 3140, 3150, 3155, 3350, 3640, 3650, Compatible with John Deere Construction and industrial models 300B (s/n 715671-later), 301A (s/n 715671-later), 401B, 401D, Replaces John Deere OEM number L26936, (Item #: 161830) $0.90

Sway Bar Support Plate - Left Hand, Used - For John Deere tractor models 820, 830, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1641, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, Compatible with John Deere Combine(s) 2240, Compatible with John Deere Construction and industrial models 300, 301, 400, 401, Compatible with John Deere Hay Cutting(s) 920, Replaces John Deere OEM number AT20168, AL23106, AR90971, Left Hand, For a new version of this item use Item #: 111974, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 411974) $22.01

Sway Block - Left Hand For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2450, 2555, 2630, 2640, 2750, 2755, 300B (Item #: 108953, Ref: R3133) $42.80

No
Picture
Sway Block - Right Hand For 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2450, 2555, 2630, 2640, 2750, 2755, 300B (Item #: 108949, Ref: R3134) $42.90

No
Picture
Sway Block Bracket, LH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Item #: 111974, Ref: S.61017) $39.60

Sway Block Bracket, Left Hand - This Left Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20168 (Item #: 111974, Ref: AT20168) $39.60

No
Picture
Sway Block Bracket, RH - For tractor models (820 German), 830, 1020, 1520, 1530, 2020, 2030, 2040, 2240, 2155, 2355, 2555, 2755, 300B, 2630, 2640, 2855. (Item #: 111975, Ref: S.61018) $41.40

Sway Block Bracket, Right Hand - This Right Hand Sway Block Bracket is used on 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310. It Replaces AT20167 (Item #: 111975, Ref: AT20167) $41.40

Sway Block Support Plate - Left Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2750, 2755, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT20168, Left Hand, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498403) $49.01

Sway Block Support Plate - Right Hand, Used - For John Deere tractor models 820, 830, 920, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2630, 2640, 2750, 2755, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM nos AT20167, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 498404) $49.01

Sway Block, LH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108953, Ref: T30277) $42.80

Sway Block, RH - For tractor models 820, 920, 1020, 1520, 830, 930, 1030, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2640, 2020, 2120, 2030, 2130, 2440, 2150, 2155, 2350, 2550, 2750, 2355, 2555, 2755, 300, 300B, 400, 301, 302, 401, 310 (Item #: 108949, Ref: T30276) $42.90

Telescoping Draft Link Pull Arm, Used - For John Deere tractor models 1020, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2440, 2510, 2520, 2630, 2640, 3010, 3020, 4000, 4020, 4030, 4230, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number AR28570, Length: 25-1/2", Left Hand and Right Hand, For a new version of this item use Item #: 108900, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 408900) $98.01

Telescoping Lift Pin - Used on John Deere models with telescoping lower pull arms. This is part F2693R shown in the Illustration. B2477R, D2865R, F2208R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. This pinis 0.703 inches in diameter at the bottom, 7.190 inches over all length and 0.50 inches at the top. (Item #: 109685, Ref: F2693R) $12.70

Telescoping Lift Pin Snap Ring - Used on John Deere models with telescoping lower pull arms. This is part F2208R shown in the Illustration. B2477R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170137, Ref: F2208R) $1.50

Telescoping Lift Pin Spring - Used on John Deere models with telescoping lower pull arms. This is part F2695R shown in the Illustration. F2208R, D2865R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109670, Ref: F2695R) $1.30

Telescoping Lift Pin Spring Washer - Used on John Deere models with telescoping lower pull arms. This is part B2477R shown in the Illustration. F2208R, D2865R, F2693R, F2695R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 109671, Ref: B2477R) $2.90

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part T18716 shown in the Illustration. F2208R, D2865R, F2693R, F2695R and B2477R in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 173019, Ref: T18716) $0.80

Telescoping Lift Pin Washer - Used on John Deere models with telescoping lower pull arms. This is part D2865R shown in the Illustration. F2208R, F2695R, F2693R, B2477R and T18716 in the illustration are each sold separately. This part is used on John Deere 940, 1020, 1040, 1140, 1520, 1530, 2010, 2020, 2030, 2040, 2240, 2350, 2440, 2510, 2520, 2550, 2630, 2640, 2750, 3010, 3020, 4000, 4020 serial number 201000 and later, 4030, 4230, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, 500, 500A serial number 123113 and earlier. (Item #: 170141, Ref: D2865R) $0.70

Top Link Assembly - For John Deere tractor models 2030, 2440 (s/n 341000 - later), 2630, 2640 (s/n 341000 - later), Compatible with John Deere Construction and industrial models 301A (s/n 362025 - later), 302, 302A, 401, 401B, 401C, 401D, Replaces John Deere OEM number AR92432, (Item #: 158208) $159.00

Top Link Bracket - For Category I hitches on: 820 (3 Cyl), 830 (3 Cyl), 1020, 1520, 1530, 2020, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855. (Item #: 160341, Ref: T21685) $43.00

Top Link Bracket, Used - For John Deere tractor models 820, 830, 930, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1640, 1830, 2020, 2030, 2040, 2130, 2140 (s/n 430000-later), 2240, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2855, Compatible with John Deere Construction and industrial models 300, Replaces John Deere OEM number T21685, For a new version of this item use Item #: 121440, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 421440) $24.01

No
Picture
Top Link End - For John Deere tractor models 1020, 1520, 2020, 2030, 2440, 2630, 2640, Compatible with John Deere Construction and industrial models 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D, Replaces John Deere OEM number AT19796, Thread: 1.00", Length: 11.00", ID: 1" Ball Diameter, (Item #: 168194) $105.00

Top Link Mounting Pin - Used on John Deere models: 820 (3 Cyl.), 830 (3 Cyl.), 840, 940, 1020, 1040, 1140, 1350, 1520, 1530, 1550, 1640, 1641, 1641F, 1750, 1840, 1850, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2140, 2141, 2150, 2155, 2240, 2250, 2255, 2350, 2355, 2355N, 2440, 2450, 2541, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2840, 2850, 2855N, 2940, 2941, 2950, 2955, 3030, 3040, 3050, 3130, 3140, 3141, 3150, 300, 300B, 301, 301A, 302, 302A, 400, 401, 401B, 401C, 401D. This part replaces John Deere part numbers AT21912, AL40957 (Item #: 161847, Ref: AL40957) $22.90

Upper Lift Arm Housing - Used on John Deere 820, 830, 1020, 1520, 1530, 2020, 2030, 2040, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 3055, 3150, 3155, 3255, this part replaces John Deere part number L33535 (Item #: 173017, Ref: L33535) $48.20

Valve Seat Insert, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Item #: 173513, Ref: T28538) $22.40

Valve Spool, Rockshaft Cylinder - For tractor models 1020, 1030, 1040, 1120, 1130, 1140, 1520, 1530, 1630, 1640, 1830, 1840, 2020, 2030, 2040, 2120, 2130, 2140, 2150, 2155, 2240, 2255, 2350, 2355, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 300B, 301A, 302, 302A, 3030, 3040. (Item #: 151029, Ref: R54969) $21.70

No
Picture
Washer - For John Deere tractor models 820 (non telescoping 3PT pull arms), 830 (non telescoping 3PT pull arms), 940 (European), 1020 (non telescoping 3PT pull arms), 1040 (European), 1120 (European), 1130 (European), 1520 (non telescoping 3PT pull arms), 1530 (non telescoping 3PT pull arms), 1630 (European), 1830 (European), 2020 (non telescoping 3PT pull arms), 2030 (non telescoping 3PT pull arms), 2040 (non telescoping 3PT pull arms), 2120 (European), 2130 (European), 2150 (European), 2155 (non telescoping 3PT pull arms), 2240 (non telescoping 3PT pull arms), 2255 (European), 2350 (non telescoping 3PT pull arms), 2355 (non telescoping 3PT pull arms), 2440 (non telescoping 3PT pull arms), 2550 (non telescoping 3PT pull arms), 2555 (non telescoping 3PT pull arms), 2630 (non telescoping 3PT pull arms), 2640 (non telescoping 3PT pull arms), 2750 (non telescoping 3PT pull arms), 2755 (non telescoping 3PT pull arms), 2840 (non telescoping 3PT pull arms), 2855 (non telescoping 3PT pull arms), 2940 (non telescoping 3PT pull arms), 2950 (non telescoping 3PT pull arms), 3055 (non telescoping 3PT pull arms), 3150 (non telescoping 3PT pull arms), 3155 (non telescoping 3PT pull arms), 3255 (non telescoping 3PT pull arms), Replaces John Deere OEM number T32488, (Item #: 176702) $1.30

Universal Parts and Accessories
Category: Hitch / Drawbar

Center Link Pin - For tractors using a Category 1 3 point hitch. Pin diameter of 3/4 of an inch. Usable length of 3 inches. Overall length of 4 15/32. Head diameter of 7/8 of an inch, with a 1/2 inch hole. Fits many models. Verify dimensions for your specific application. Can be used with DKP14 linch pin. (Item #: 108702, Ref: 957E560) $1.80

Check Chain and Pin Kit - Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Item #: 111334, Ref: CBPN598A) $9.20

$John Deere 2640 Drawbar, Universal Cat I, 20-1\2 Inch$
Drawbar, Universal Cat I, 20-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Item #: 179615, Ref: S.49123) $57.00

$John Deere 2640 Drawbar, Universal Cat I, 25-1\2 Inch$
Drawbar, Universal Cat I, 25-1/2 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Item #: 178799, Ref: S5009) $39.30

$John Deere 2640 Drawbar, Universal Cat I, 29-3\4 Inch$
Drawbar, Universal Cat I, 29-3/4 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Item #: 178800, Ref: S128196) $48.80

$John Deere 2640 Drawbar, Universal Cat I, 30-1\8 Inch$
Drawbar, Universal Cat I, 30-1/8 Inch - Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103174, Ref: S125) $42.10

$John Deere 2640 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Item #: 103176, Ref: S126) $57.00

$John Deere 2640 Drawbar, Universal Cat II, 30-3\4 Inch$
Drawbar, Universal Cat II, 30-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Item #: 103176, Ref: S60155) $57.00

$John Deere 2640 Drawbar, Universal Cat II, 36-1\4 Inch$
Drawbar, Universal Cat II, 36-1/4 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Item #: 179623, Ref: S15134) $132.00

$John Deere 2640 Drawbar, Universal Cat II, 36-29\32 Inch$
Drawbar, Universal Cat II, 36-29/32 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Item #: 179670, Ref: S3394) $94.00

$John Deere 2640 Drawbar, Universal Cat II, 36-3\4 Inch$
Drawbar, Universal Cat II, 36-3/4 Inch - Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Item #: 103177, Ref: S60156) $75.91

$John Deere 2640 Drawbar, Universal Cat II, 39-3\8 Inch$
Drawbar, Universal Cat II, 39-3/8 Inch - Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Item #: 179583, Ref: S15081) $99.00

$John Deere 2640 Drawbar, Universal Cat III, 42-3\4 Inch$
Drawbar, Universal Cat III, 42-3/4 Inch - Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Item #: 180531, Ref: S29139) $284.00

Hair Pin Assortment - 15-piece assortment. Includes four (4) of HP-3 (wire diameter 3/16 inch, length 3.75 inches), four (4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four (4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three (3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Item #: 182461, Ref: HPA15X) $11.40

Leveling Assembly - Universal Economy Leveling Assembly. 1-5/16" body of high strength tubing, thread size, 7/8" fine thread-study clevis at each end with 5/8" pin holes. May be used right or left. Can Replace NCA577A and Fork. 18 inches closed, 28 inches open. (Item #: 154104, Ref: LB152) $31.10

Lift Arm Bushing - This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Item #: 108626, Ref: BUSH04) $2.60

Linch Pin, Pack of 2 - Package of 2 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. (Item #: 153791, Ref: DKP516) $1.30

Linch Pins, Pack of 2 - Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Item #: 153789, Ref: DKP14) $1.10

Linch Pins, Pack of 2 - Package of 2 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 2. (Item #: 153792, Ref: DKLP91) $1.20

Linch Pins, Pack of 2 - Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. (Item #: 153788, Ref: DKP316) $1.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Item #: 185049, Ref: 159332) $45.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Item #: 103203, Ref: 159324) $41.10

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 185732, Ref: 159326) $61.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 184428, Ref: 159328) $55.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103206, Ref: 159330) $64.00

Lower Lift Arm, RH or LH, CAT I - This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Item #: 103207, Ref: 159322) $60.00

Mower Deck Height Stabilizer Kit - Fits all category 1 tractors. Chain length is 40 inches. Maintains consistent mower height and eliminates need for stabilizer bars. Contains two top brackets and two lower brackets with chain. (Item #: 103201, Ref: MHSK1) $36.00

Quick Hitch A-Frame Design - Makes for easier implement attachment, by use of self-aligning steel roller. System self-aligns as tractor�s 3-point hitch is raised. This is a CE Approved, Cat I. 2645 pound capacity. For implement side adapter, see part number S23465. Additional $200.00 shipping due to weight. (Item #: 179003, Ref: S110168) $337.00

Quick Hitch A-Frame Implement Adapter - Used with S110168 quick hitch, this is a weld on bracket. The load capacity is3306 pounds. (Item #: 179380, Ref: S23465) $103.21

Quick Hitch, Category I - Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. This part ships via truck freight. Please call for pricing and ordering. (Item #: 180731, Ref: HF141101) $330.00

Stabilizer Assembly - This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Item #: 179605, Ref: 343437X1) $21.90

Stabilizer Chain - This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Item #: 173628, Ref: 159350) $27.40

Stabilizer Chains, Set - 1 SET OF 2 stabilizers for ford tractors having an extra link which allows easy attachment to large and small model tractors by uncoupling the clevis and pin and moving up or down one link of the stabilizer accordingly. (Item #: 174066, Ref: SK102CH) $62.00

Stabilizer Link - This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Item #: 179606, Ref: VPL3232) $30.60

Top Link - Economy Top Link, 16 inch body. Category 1, 3/4 inch balls. Adjusts 20.5 to 29 inches overall. Dichromate plated center body. OEM JSA5050 (Item #: 184512, Ref: 30533E91) $27.30

Universal Drawbar Lock - For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Item #: 178107, Ref: 49A29) $25.70

Universal Drawbar Lock - For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Item #: 112156, Ref: DBL2) $37.00

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories] [All 2640 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy