Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 2030 Parts

Category: PTO / Driveline

[Categories]   [All 2030 Parts]   [All John Deere Models]  


John Deere 2030 Bearing Housing, without Bearing
Bearing Housing, without Bearing
- For tractor models 820, 920, 1020, 1030, 1120, 1130, 1520, 1530, 1630, 1830, 2020, 2030, 2130, (2240 SN# up to 349999), 2440, 2630, 2640. (Part No: T21996)
$113.86

No
Picture
Bearing Race
- Replaces JD10283. Inside diameter is 1.181", outside diameter 1.602", width is .748". For tractor models 3120, 300, 301, 400, 401, 500, 600, 1020, 1120, 1520, 2020, 2030, 2120, 2140, 2355, 2440, 2510, 2520, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 3040, 3055, 3140, 3150, 3155, 3255, 4000, 4020, 4030, 4040, 4050, 4055, 4230, 4240, 4250, 4255, 4320, 4430, 4440, 4450 and 4455 (Part No: JD7557)
$11.14

John Deere 2030 PTO Bearing Housing \ Quill
PTO Bearing Housing / Quill
- This is the Bearing Housing / Quill, Rear PTO Shaft used on 820, 920, 1020, 1120, 1520, 2020, 830, 1530, 2030, 2130, 2630, 940, 1040, 1640, 2040, 2240, 2440, 2640, 300, 400. Replaces T22237, R47514 (Part No: R47514)
$188.73

John Deere 2030 PTO Belt Pulley Shaft Oil Seal
PTO Belt Pulley Shaft Oil Seal
- This PTO belt pulley shaft oil seal has a 2.625 inch Inside Diameter, a 3.628 inch Outside Diameter and is .433 inch wide. It Fits: 1020, 2010, 2030, 2040, 2141, 2240, 2520, 2541, 2941, 3141, 3641, 4320, 4020 (up to SN: 200999). Replaces: AT124396, AT16887 (Part No: A57342)
$8.61

John Deere 2030 PTO Brake Band
PTO Brake Band
- This PRO Brake Band is used on John Deere 1020, 1520, 2020, 830, 930, 1130, 1530, 1630, 1830, 2030, 2130, 2630, 2040, 2240, 2440, 2640, 301A, 401B, 401D. Replaces AR58605 and RE44253 (Part No: RE44253)
$95.99

John Deere 2030 PTO Clutch Disc
PTO Clutch Disc
- 45 internal splines, 5.250" O.D.. For tractor models (1020, 1520, 2020, 2640 with hi-lo shift), (1530 SN# xxxxxx and up), (2030, 2630 with hi-lo shift & SN# xxxxxx and up), 2240, (2440, 2640 with ind. 540-1000 PTO & hi-lo trans.), 2940, 2955. Replaces AR78361. (Part No: AR108105)
$17.56

John Deere 2030 PTO Clutch Plate
PTO Clutch Plate
- 5.20" O.D., 3.903" I.D., .179" thick. For tractor models (1020 with independent 540 PTO), (1520 with indp PTO SN# xxxxxx and up), (1530 with indp 540 PTO used with AL29818 frum), (2020 with indp PTO used with AL29181 drum), (2030 with indp 540-1000 PTO SN# 187301 and up used with AL29820 drum), (2040 with 540 PTO SN# 350000 and up), 2155, 2240, 2355, 2355N, 2440, 2630 with indp 540-1000 PTO), 2640, 2755, 2840, 2855, 2940, 2955, 3055, 3155, 3255. AL23113, AT32058. (Part No: L33563)
$24.63

No
Picture
PTO Disc, 8.875
- Torsion damp, spline dia. 1.496", 23 spline. For tractor models (1020 with cont. driven PTO or vineyard, europe, dual, engine PTO), (1040, 1140 from Canada with cont PTO or dual, engine PTO or dual, cont PTO), (1120 from europe with cont. driven PTO), (1130 from europe with dual, engine PTO), (1350 europe, dual, cont driven PTO), (1520 dual, cont. driven PTO or europe dual, engine PTO), (1530, 2020, 2030 dual, cont. driven PTO), (2020, 2040, 2120 europe, cont. driven PTO), (2130, 2155 with Ind. PTO). Replaces AT21675. (Part No: AL19092)
$126.50

No
Picture
PTO Friction Disc
- PTO FRICTION DISC For 1020, 1520, 1530, 2020, 2030, 2240, 2440, 2440 LESS HI-LO, 2630, 2640, 2640 LESS HI-LO, 2840 (Part No: TP-RE37011)
$17.66

John Deere 2030 PTO Separator Plate
PTO Separator Plate
- Application for independent PTO power shaft clutch. IPTO: 540-1000. Separator plate, 5.185" O.D., 3.895" I.D., 10 external splines, application uses 10 sold individually. Used with AL38240 friction discs. For tractor models 1020, 1520, 1530, 2020, 2030, 2040, 2150, 2155, 2240, 2255, 2350, 2355, 2355N, 2440, 2550, 2555, 2630, 2640, 2750, 2755, 2840, 2855N, 2940, 2950, 2955, 3055, 3150, 3155, 3255. (Part No: TP-T28664)
$9.03

John Deere 2030 PTO Shaft
PTO Shaft
- This PTO Shaft is 31.250 long, 6 spline, 540 RPM. It is used on some of the following: 1020 (W/ HEAVY DUTY PTO BEARINGS), 1030, 1040 (Serial Number 437370 and up), 1120 (W/ HEAVY DUTY PTO BEARINGS), 1130, 1140 (SN 437370>), 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 2030, 2040 (Serial Number 350000 and up), 2130, 2140, 2150, 2155, 2240 (Serial Number 350000 and up), 2250, 2255, 2350, 2355, 2450, 2550, 2555, 2750, 2755, 2855, 820 (3 Cyl.) (W/ HEAVY DUTY PTO BEARINGS), 840 (Serial Number 437370 and up), 920 (W/ HEAVY DUTY PTO BEARINGS), 940 (Serial Number 437370 and up) It replaces L28712, L38806. Verify measurements and OEM Numbers. (Part No: L38806)
$351.32

John Deere 2030 PTO Shaft Seal
PTO Shaft Seal
- This Seal has multiple applications for John Deere, including; PTO seal, differential brake pinion shaft seal, inner bearing housing seal, direction reverser seal, upper final drive outer pinion shaft seal, front wheel assist transfer box seal, and others. It measures 1.375 inch inside diameter, 2.130 inch outside diameter, and 0.437 inch wide. Verify measurements or OEM part number before ordering. Replaces 0511073, 1K1590, 1K1590, 224810, 230608, 241779, 340214, 35451D, 357970R91, 357976R91, 380184R91, 43509D, 43509DA, 511073, 527829R91, 60454D, 659124R91, 70224810, 70230608, 70241779, 70241D, 938294R91, 938294R92, AH14076, AL2094T, AL56820, AM253T, AN30648, AN32717, AP24021, K1590, K1590, M86688, N71730N, T22069 (Part No: 70241779)
$6.36

John Deere 2030 PTO Shaft, 1000 RPM
PTO Shaft, 1000 RPM
- 9.781" long, 21 splines. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: T30803)
$224.66

John Deere 2030 PTO Shaft, 1000 RPM
PTO Shaft, 1000 RPM
- 5.290" long, 21 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 302, 820, 920, 1030, (2440 SN# up to 340999). (Part No: AT20095)
$154.37

John Deere 2030 PTO Shaft, 540 RPM
PTO Shaft, 540 RPM
- 31.250" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1520, 1530, 1830, 2020, 2030, 2040, 2120, 2240, 2630, 301A, 302, 401B, 820, 830, (920 up to SN# 178089), 300B, 302A, 401C, (2440, 2640 SN# up to 340999). (Part No: R47249)
$304.91

John Deere 2030 PTO Shaft, 540 RPM
PTO Shaft, 540 RPM
- 6.875" long, 6 spline. For tractor models JD300, JD301, JD400, JD401, 1020, 1120, 1130, 1520, 2020, 2030, 2120, 2440, 302, 820, 920, 1030. (Part No: AT20094)
$223.75

John Deere 2030 PTO Shaft, 540 RPM
PTO Shaft, 540 RPM
- Does not include JD7557 bearing race. 9.203 inches long, 6 spline. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1550, 1640, 1830, 1840, 1850N, 1950, 1950N, 2020, 2030, 2040, 2040S, 2120, 2130, 2140, 2250, 2355N, 2440, 2450, 2550, 2555, 2630, 2640, 2650, 2650N, 2750, 2755, 2850, 2855N, JD300, JD301, JD400, JD401. (Part No: AT29707)
$160.08



John Deere 2030 Driveline Assembly
Driveline Assembly
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor and implement yokes. 1333 mm (52-1/2 inch) overall length, end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit is 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1333 mm (52-1/2 inch) overall length. ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111WY138)
$176.82

John Deere 2030 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor and implement yokes. 1-3/8 inch 6 spline Q.D. tractor yoke. 1-3/8 inch round bore with 1/2 inch pin hole implement yoke. 1300 mm (51 inch) overall length end of yoke to end of yoke. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit, 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch) overall length (43-3/4 inch). Verify length before ordering. (Part No: AB4111WY)
$187.82

John Deere 2030 Driveline Assembly with Yokes
Driveline Assembly with Yokes
- AB4 series, complete drive shaft assembly with shielding and tractor yoke, ratcheting torque limiter on implement end. 1-3/8 inch 6 spline Q.D. tractor yoke, 1-3/8 inch 6 spline ratcheting torque limiter with quick disconnect on implement end. 1372 mm (54 inch) overall length end of yoke to end of clutch. 1110 mm (43-3/4 inch) compressed length center to center of cross bore. Cross and bearing kit 27 mm 1.063 (1-1/16 inch) bearing diameter x 74.6 mm 2.940 (2-15/16 inch). 1372 mm (54 inch) overall length ***VERIFY LENGTH BEFORE ORDERING*** (Part No: AB4111K33)
$288.01

John Deere 2030 Overrun Coupler with Quick Release
Overrun Coupler with Quick Release
- This Overrun Coupler features a Quick Release. It fits applications needing a male and female end of 6 splines and 1 3/8 inches. (Part No: S.23639)
$45.17

John Deere 2030 PTO Safety Clutch, 40 HP
PTO Safety Clutch, 40 HP
- 1-3/8 inch 6 spline male and female ends, 6 inch diameter, 40 horse power capacity. Heavy duty unit allows PTO driven implements to freewheel with adjustable safety protection under load. Prevents expensive damage to internal tractor PTO packs. Prevents single clutch tractors from being driven forward by PTO over-run. (Part No: B9164)
$235.29

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: PTO / Driveline

[Categories]   [All 2030 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy