FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

John Deere 1950 Parts

Category: Steering

[Categories] [All 1950 Parts] [All John Deere Models]

Axle Shaft - Used in ZF Mechanical Four Wheel Drive axles, this part replaces AL33349, ZP1927860, 1502272C1, 3232082R91, 81927860. (Item #: 124723, Ref: AL33349) $218.00

Ball Joint, 13 Notch - Measure 14.509 inches from center of ball joint to the end of the shaft. The shaft is 0.781 inches in diameter. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1850, 1950, 2020, 2120, 2150, (2155 with straight axle), 2250, 2350, 2355, 2550, 2555, 2755. Replaces John Deere part numbers AL178098, AL39024 (Item #: 102246, Ref: AL39024) $26.50

Bellcrank - This bellcrank is used on models 1040, 1140, 1350, 1550, 1750, 1850, 1950, 1950N, 2155, 840, 940, 2150. (Item #: 104919, Ref: AL55148) $180.00

Center Steering Arm Pin Bushing - Two of these bearings are used in many application. This bearing measures 1.377 inches inside diameter, and 2.441 inches outside diameter. This bearing replaces JD10137, AL112628, 32007. (Item #: 179918, Ref: JD10137) $28.67

Differential Pinion Bearing - Used on mechanical four wheel drive front ends, this open roller bearing measures 1.42 inches inside diameter, 2.28 inches outside diameter and 0.78 inches wide. Replaces OEM numbers International Harvester - 81326C1, Ford/New Holland - 83934020, E2NN1N055AA, John Deere - AL39377, JD10250 (Item #: 112468, Ref: VPJ2550) $43.50

Differential to Axle Housing Seal - On ZF Axles, this o-ring goes between the deferential case and the axle housing. Used on APL 325 and APL 335 axles. Replaces E1NN3N267AA, 81279C1, 83927734, L40306 (Item #: 156189, Ref: E1NN3N267AA) $2.20

E1NN1N050AA - Made of Nitrile Rubber, this o-ring measures 7.874 inches inside diameter with a 0.118 inch thickness. Used on ZF Mechanical Four Wheel Drive axles. It is used in many mechanical four wheel drive systems. Replaces OEM numbers 81313C1, 81326C1, 1-31-742-032, 71452157, E1NN1N050AA, 83927797, L40317, AL40317 (Item #: 156198, Ref: E1NN1N050AA) $6.90

Final Drive Shaft - Used in Mechanical Four Wheel Drive front ends, this part replaces: E1NN3A328AB, L40029, 81453C1, 83927740, 83934903. It has 18 teeth on both ends. (Item #: 124721, Ref: L40029) $95.00

Front Axle Casting Front Bushing - Measuring 0.810 inches inside diameter, 1.250 inches outside diameter and 3.636 inches long, this bushing is used on 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. Replaces T21669 (Item #: 111973, Ref: T21669) $12.00

Front Axle Casting Rear Bushing - Used on John Deere models: 820 (Straight Front Axle), 830 (Straight Front Axle), 840, 940 (Straight Front Axle), 1020 (MFWD), 1030 (MFWD), 1040, 1120 (MFWD), 1130 (MFWD), 1140, 1350, 1520 (MFWD), 1530 (MFWD), 1550, 1630 (MFWD), 1640, 1750, 1830 (MFWD), 1840, 1850, 1850N, 1950 (Straight Front Axle), 1950N (Swept Back Axle), 2020 (MFWD), 2030 (MFWD), 2040, 2040S (MFWD), 2120 (MFWD), 2130 (MFWD), 2140, 2150 (Swept Back Axle), 2155 (Swept Back Axle), 2250, 2350, 2355, 2440, 2450, 2630, 2640, 2750, 2755, 2855N, 300, 301, 302, 310, 380, 400, 401, 410, 500, 610, 480. This bearing measures 1.765 inches outside diameter, 1.575 inches inside diameter, and is 1.500 wide. Replaces John Deere OEM numbers L57310, L62836, T23170 (Item #: 113981, Ref: T23170) $10.40

Front Axle Support Bushing - Used on John Deere 1350, 1550, 1850, 1850F, 1950, 1950F, 1950N, 2040S, 2140, 2155, 2250, 2250F, 2355, 2450, 2450F, 2555, 2650, 2650F, 2750, 2755, 2850, 2855N this bushing measures 1.252 inches inside diameter, 1.422 inches outside diameter, and 1.571 inches long. (Item #: 168061, Ref: L62835) $13.00

Hub Seal, Inner - Found in many MFWD (mechanical four wheel drive) front ends, this seal measures 4.80 inches inside diameter, 5.90 inches outside diameter, 0.53 inch width. It replaces OEM numbers 81869544, 83946025, 83932098, 83927796, E1NN1214AC, 1456320, ZP0734309421, ZP0750110140, ZP0734317062, ZO0750110147, ZP0750110147, AL68210, 84295352, 81311C1, 1964235C1, 1964235C2, 81309C1, 81310C1 (Item #: 124718, Ref: ZP0750110147) $58.00

Hub, Front Wheel, 6 Bolt - 6 Bolt Hub uses p/n WBKJD3 wheel bearing kit and p/n WB916 Bolt set (available separately). Fits 1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1641F, 1750, 1850, 1950, 2020, 2040, 2120, 2155, 2240, 2255, 2350 (Low profile), 2355 (Mid-Hi axle), 2355N, 2550, 2555 (Mid-Hi axle), 2755 (Mid-Hi axle), 820, 830, 840. (Item #: 102233, Ref: R47076) $58.00

Oil Seal - Used in Mechanical Four Wheel Drive front axles, this seal measures 75mm inside diameter, 95mm outside diameter and 10mm wide. Used on John Deere 940, 1040, 1140 up to serial number 621999, 1550, 1640, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2850, 3040, 3050, 3140, 3350, 533, 633, 733, 833, 485, 585, 685, 785, 885, 743, 644, 744, 844, 844S, 745, 745S, 856, 5600, 6600, 5700, 6700. Used on ZF APL1251, APL1351, APL1552 axles. (Item #: 186986, Ref: AL32888) $6.40

Orbital Steering Unit Seal Kit - Used on Danfoss Orbital Steering units on John Deere models: 1640, 2040, 2140, 3040, 3140, 3640, 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850, 3050, 3350, 3650. This Kit replaces John Deere part number AL112819 (Item #: 165413, Ref: 1810503M92) $29.80

Planetary Carrier Housing - Used on ZF APL-325 Axles. Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. This part replaces 81454C1, 135700420748, 83927791, E1NN1N045AA, L40041 (Item #: 127236, Ref: VPR6067) $1389.01

Planetary Gear - Used on John Deere 1640 Serial number 430000 and up, 2040 serial number 430000 and up, (1550, 1750, 1850, 1850N, 1950, 1950N, all serial number 750789 and up), 2250, 2350, 2450, 2550, 2650, 2650N, (2155, 2355N, Axle serial number 100217 and up), 2355, 2555, 2855N. Three are used per housing. Sold individually. This part replaces 81455C1, E1NN4044AB, L40028 (Item #: 124631, Ref: VPJ7852) $107.00

Planetary Ring Gear - For Mechanical Four Wheel Drive, this planetary ring gear has 114 spines and an outside diameter of 8.16 inches. This part replaces OEM numbers 81452C1, 83927789, L40043 (Item #: 124630, Ref: L40043) $366.80

Roller Bearing with Cup MFWD - Used on ZF APL315, APL325, and APL330 Mechanical Four Wheel Drive Axles, the pivot bearing replaces OEM part numbers 1342525C2, 1342525C1, 81416C1, 81417C1, 83958377, AL63617, ZP0750117306, LM72848 and LM72810. These axles can be found on John Deere models: 1550, 1640, 1750, 1850, 1950, 2040, 2250, 2450, 2650 (Item #: 124691, Ref: AL63617) $47.40

No
Picture
Spider U-Joint Assembly - For John Deere tractor models 1550 (s/n 750789-later), 1550 (s/n 720000-750788), 1640 (s/n 038265-048738), 1750 (s/n 720000-750788), 1850 (s/n 720000-later), 1850N, 1950 (s/n 720000-later), 1950N, 2040 (s/n 038265-048738, 450000-later), 2040S (s/n 038265-048738, 450000-later), 2250, 2350 (s/n 038265-048738), 2355, 2450, 2550 (s/n 038265-048738), 2555, 2650, 2650N, 2755, 2850, Replaces John Deere OEM number AL64255, AL65195, AL64126, AL71316, (Item #: 176288) $91.00

$John Deere 1950 Spindle - Right Hand\Left Hand$
Spindle - Right Hand/Left Hand - For John Deere tractor models 1040, 1130, 1140, 1550, 1630, 1640, 1750, 1830, 1840, 1850, 1950, 2030, 2040, 2140, 2250 (with 44.5mm king pin), 2350, 2355, 2450, 2550, 2555, 2650, 2755 (Hi-Version), 2850, Replaces John Deere OEM number AL28222, Dimension A: 14.875", Dimension B: 1.500", Dimension C: 1.795", Dimension D: 1.312", Left or Right Side, (Item #: 102217) $158.00

No
Picture
Spindle - Right Hand/Left Hand, Used - For John Deere tractor models 940, 1020, 1030, 1040, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle), 2355, Replaces John Deere OEM number AR58607, T29214, R47078, For a new version of this item use Item #: 102219, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 453579) $97.01

Spindle Bushing - Used with AR103472, AR103473, AR58606 and other 1.375 inch axle shaft spindles. Replaces T21539 (Item #: 113923, Ref: T21539) $10.80

Spindle Dust Seal - This Spindle Dust Seal Measures: 44.6mm (1.76 inches) Inside Diameter, 59.78mm (2.35 inches) Outside Diameter. Note, this seal can be felt as shown, or cork depending on availability. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2282T (Item #: 115287, Ref: M2282T) $4.50

$John Deere 1950 Spindle LH\RH$
Spindle LH/RH - Measures A = 11.875", B = 1.375", C = 1.375", D =.842" REPLACES OEM numbers : AR49589, AT23636. Fits:1020, 1030, 1120, 1130, 1140, 1350, 1550, 1630, 1640, 1750, 1840, 1850, 1950, 2020, 2040, 2120, 2150, 2155 (mid-hi axle), 2250 (swept back), 2350 (low profile), 2355 (mid-hi axle), 2450, 2550, 2555 (mid-hi axle), 2755 (mid-hi axle), 820, 830, 840, 920, 930, 940, 1035. Wheel Bearing kit available separately as p/n WBKJD3. (Item #: 102216, Ref: AR58606) $151.37

$John Deere 1950 Spindle LH\RH with fender mtg brkt.$
Spindle LH/RH with fender mtg brkt. - Measures A = 15.312", B = 1.375", C = 1.375", D =.842". Fits 1020, 1030, 1120, 1130, 1140, 1550, 1630, 1750, 1850, 1950, 2020, 2120, 2155 (hi-straight axle, 2355N, 940, 1040. Wheel Bearing kit available separately p/n WBKJD2 or WBKJD3 Depending on application. Verify OEM of individual parts needed your your application. (Item #: 102219, Ref: AR58607) $130.00

Spindle Thrust Bearing - This Spindle Thrust Bearing Measures: 35.3mm (1.39 inches) Inside Diameter, 58.5mm (2.30 inches) Outside Diameter, 16mm (0.63 inches) Wide. Used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces JD8407, JD2407, AH548R, JD8407HQQ, QX38497, 04271AB, VT2729, A30054, 441242C1 (Item #: 104207, Ref: JD8407) $10.80

Spindle Thrust Washer - This Spindle Thrust Washer is used on John Deere TRACTOR: 1010 (SINGLE ROW CROP, SN 010001-042000), 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2040, 2120, 2150, 2155, 2240, 2250, 2255 (SWEPT BACK AXLE), 2350 (LOWPROFILE), 2355 (MID-HI AXLE), 2355N, 2440, 2550, 2555 (MID-HI AXLE), 2630, 2640, 2755 (MID-HI AXLE), 3350, 320 (STD AXLES), 330 (STD AXLES), 40 (SERIAL NUMBER 69404 AND UP W/ STD AXLE), 420 (STD AXLES), 430 (STD AXLES), 820 (3 Cyl.), 830 (3 Cyl.), 940. Replaces M2283T (Item #: 115286, Ref: M2283T) $2.50

Spindle, Used - For John Deere tractor models 1750, 1850, 1950, 2150, 2155, 2350, 2355, 2550, 2555, 2750, 2755, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Compatible with John Deere Sprayer(s) 6500, Replaces John Deere OEM number AL38381, Upright Shaft Length: 9.250", Upright Shaft Diameter: 1.500, Inner Bearing Diameter: 1.795", Outer Bearing Diameter: 1.312", Left Hand or Right Hand, For a new version of this item use Item #: 104776, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 430522) $59.01

Steering Arm - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25879, (Item #: 104933) $93.00

Steering Arm - For John Deere tractor models 1950, 2150, 2155, 2355, 2440, 2640, 2855, Compatible with John Deere Construction and industrial models 301, 302, 401, Replaces John Deere OEM number T36705, LH Steering Arm, (Item #: 104949) $151.00

Steering Arm - Left Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21619, Fits Left Hand Side, For Right Hand Side use Item #: 104957, (Item #: 104956) $157.00

Steering Arm - Right Hand - For John Deere tractor models 1950, 2150, 2155, 2355, 2440, 2640, 2855, Compatible with John Deere Construction and industrial models 301, 302, 401, Replaces John Deere OEM number T36704, RH Steering Arm, (Item #: 104948) $155.00

Steering Arm - Right Hand - For John Deere tractor models 840, 940, 1020 (All w/ Straight Fron Axle), 1120, 1130, 1140, 1350, 1520 (All w/ Straight Fron Axle), 1530 (All w/ Straight Fron Axle), 1550, 1630, 1640, 1750, 1850, 1950, 2020 (All w/ Straight Fron Axle), 2030 (All w/ Straight Fron Axle), 2120, 2150, 2155 (All w/ Straight Fron Axle), 2240 (All w/ Straight Fron Axle), 2250, 2350, 2355 (All Middle Version w/ Straight Fron Axle), 2440, 2550, 2555 (All Middle Version w/ Straight Fron Axle), 2630 (All w/ Straight Fron Axle), 2640 (All w/ Straight Fron Axle), 2755 (All Middle Version w/ Straight Fron Axle), Compatible with John Deere Construction and industrial models 301, 401, Replaces John Deere OEM number T21618, Fits Right Hand Side, For Left Hand Side use Item #: 104956, (Item #: 104957) $132.00

Steering Arm - Right Hand, Used - For John Deere tractor models 1950, 1950N, 2150, 2155, 2251N, 2355, 2440, 2640, 2855N, Compatible with John Deere Construction and industrial models 301A, 302, 401, 401B, Replaces John Deere OEM number T36704, Right Hand, For a new version of this item use Item #: 104948, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404948) $85.01

Steering Arm, Used - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25879, Front Axle, Heavy Duty, For a new version of this item use Item #: 104933, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404933) $52.01

Steering Arm, Used - For John Deere tractor models 940, 1020, 1120, 1130, 1140, 1520, 1550, 1630, 1750, 1850, 1950, 2020, 2030, 2120, 2150, 2155, 2250, 2440, 2630, 2640, Replaces John Deere OEM number L25880, Front Axle, Heavy Duty, For a new version of this item use Item #: 104934, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 404934) $50.01

Steering Motor - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950, 2040, 2040S, 2250, 2450, 2650, 2755, 2850, 3050, 3350, Replaces John Deere OEM number AL41631, (Item #: 164464) $373.00

Taper Roller Bearing - Measuring; Width - 0.548 inches, Inside Diameter - 3.740 inches, Outside Diameter - 5.315 inches, this bearing is used in ZF Axles on tractors with mechanical four wheel drive. This bearing also has other applications. Replaces OEM numbers: ZP0750117062, 5136951, 83946047, 81312C1, 83927807, 47539809, 1-31-741-019, 05136951, 85136951, 85806002, 1966169C1, CAR118378, 83983456, AL38099, RE45944, 819310, 819349/819310, 819349 (Item #: 156177, Ref: ZP0750117062) $86.82

Tie Rod - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110L, 6120L, 6200, 6200L, 6210L, 6300, 6300L, 6310L, 6310S, 6400, 6400L, 6410L, 6420L, 6500, 6500L, 6510L, 6510S, 6520L, Replaces John Deere OEM number AL37204, Length: 18.750", Width: 1.250", (Item #: 160188) $54.00

Tie Rod Assembly - For 1020, 1030, 1040, 1120, 1130, 1630, 2020, 2120, 840, 940, (1140, 1350, 1550, 1750, 1850, 1950, 2250 all with Straight Front Axle), 1640 with Low Clearance Axle. Complete Tie Rod Assembly. The assembly consists of one each of AL39024, T29109, R50507 and AL39020. (Item #: 104827, Ref: AL39023) $128.00

Tie Rod Assembly - For John Deere tractor models 1550, 1640, 1750, 1840, 1850, 1950 (with APL315/325 Front Axle, Hydro Steering), 2040, 2040S (with APL325 Front Axle, s/n 430000 - later), 2140 (Mfg in Spain, s/n 133493 - later, with APL735 Front Axle, s/n 430000 - later), 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750 (with APL735 Front Axle), 2755 (with APL735 Front Axle, s/n 676090 - earlier), 2850 (Mfg in Spain), Replaces John Deere OEM number AL38097, (Item #: 104849) $134.00

Tie Rod End - Tie rod end with nut, 285.75 MM (11 1/4 inches) length and open metric end port of 18 MM with 1.5 metric right hand thread pitch. 1550, 1750, 1850, 1950, 2250, 2450, 2650, 2850. Replaces AL39319, AL168693. (Item #: 104829, Ref: AL39319) $69.72

Tie Rod End - Measures Overall Length 7" (177.8 mm); top M20 X 1.5 RH Thread; bottom M18 X 1.5 RH Thread. Used on 1550, 1640, 1750, 1850, 1950, 2040, 2040S, 2140, 2250, 2350, 2355, 2450, 2550, 2555, 2650, 2750, 2850. Replaces 6000103261, AL178240, AL39320 (Item #: 105181, Ref: AL39320) $52.00

Tie Rod Tube - 12.218" long, .812" I.D., 1.125"-12 O.D. thread. For tractor models 840, 940, 1020, 1030, 1040, 1120, 1130, 1140, 1350, 1520, 1530, 1550, 1630, 1640, 1750, 1850, 1950, (2020 with swept back axle), 2030, 2120, 2150, 2155, 2240, 2250, 2350, 2355, 2550, 2555, 2630, 2640, 2755, JD301, JD401. (Item #: 128344, Ref: T29109) $25.50

No
Picture
Tie Rod Tube - For John Deere tractor models 1550, 1640, 1641, 1750, 1840, 1850, 1950, 2040, 2040S, 2140, 2141, 2250, 2251, 2350, 2351, 2355, 2450, 2541, 2550, 2555, 2650, 2651, 2750, 2755, 2850, 2941, 2951, 6110, 6110L, 6120, 6120L, 6200, 6200L, 6210, 6210L, 6220L, 6300, 6300L, 6310, 6310L, 6310S, 6320, 6320L, 6400, 6400L, 6410, 6410L, 6410S, 6420, 6420L, 6500, 6500L, 6510, 6510L, 6510S, 6520, 6520L, Replaces John Deere OEM number L39324, 32.75" Long, Additional Handling and Oversize Fees Apply To This Item, (Item #: 104833) $173.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power Steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: PMLF614 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $8.24

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All 1950 Parts] [All John Deere Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy