Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 620 Parts

Category: Fuel System / Air Intake

[Categories]   [All 620 Parts]   [All John Deere Models]  


John Deere 620 Air Cleaner Bowl
Air Cleaner Bowl
- Clear plastic pre-cleaner bowl for the air intake system. Bowl outside diameter at top approximately 7-1/4 inch, side height 3 inches, cone inside diameter at top 3-1/2 inch, overall height 4-1/8 inch. Commonly used on pipe inlets ranging from 2-3 inches. For tractors: 630, 730, 4020, 600, 500, 520, 530, 620, 720, 820, 830, 1020, 1030, 2130, 2150, 2240, 2355, 2555, 1010 diesel, 2010, 2020 diesel, 2030, 2040, 2150, 2255, 2440, 2510, 2520, 2630, 2640, 2840, 3010, 3020, 4000, 4010, 4020. (Part No: R28794)
$6.26

John Deere 620 Air Precleaner Assembly
Air Precleaner Assembly
- For 520, 530, 620, 630, 720, 730. Air Precleaner Assembly. 7 Inch Diameter, 3 inch ID base. (3817R) (Part No: AF3580R)
$98.68

John Deere 620 Air Stack Muffler Spacer Block
Air Stack Muffler Spacer Block
- For 620, 630, 720, 730. (Part No: R21057R)
$48.30

John Deere 620 Carburetor Float
Carburetor Float
- For tractor models 50, 60, 70, 520, 530, 620, 720, 530, 630, 730. Carburetor Float. Replaces: AA4353R, AA5656R, AA6632R, AA6633R, AB4636R, AB4794R, AB5150R, AB5151R, AF1561R, AF1632R, AF2826R, AF2827R, AR10069R, 30-713. Used on the following carburetors: DLTS75, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99. Measures 66.3mm Long x 27mm Wide x 30mm Thick. (Part No: AR10069)
$30.00

John Deere 620 Carburetor Gasket Set
Carburetor Gasket Set
- This Carburetor Gasket Set is used on Marvel Schebler Carburetors: DLTX75, DLTX81, DLTX82, DLTX83, DLTX84, DLTX85, DLTX86, DLTX94, DLTX95, DLTX96, DLTX97, DLTX98, DLTX99, DLTX101, DLTX102, DLTX105, DLTX106, DLTX109U (Part No: R2119)
$8.40

John Deere 620 Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Marvel DLTX75, DLTX83, DLTX86, DLTX96, DLTX105, DLTX99, DLTX81, DLTX84, DLTX82, DLTX102, DLTX97, DLTX94, DLTX106, DLTX85, DLTX101, DLTX98, DLTX95 carbs used on 50, 520, 530, 60, 620, 630, 70, 720, 730. (Part No: MS105)
$18.38

John Deere 620 Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- This is a comprehensive carburetor kit for Marvel Schebler DLTX94. It contains all the parts shown. Verify carburetor number before ordering. (Part No: R8209)
$195.65

John Deere 620 Carburetor Repair Kit
Carburetor Repair Kit
- Basic carburetor repair kit~ contains needle float valve, throttle shaft, float lever shaft and gasket set. Comes with VITON needle float valve. Carburetor manufacture numbers: DLTX81, DLTX82, DLTX84, DLTX85 and AA5344R, For 60, 620, 630, 70, 720, 730 (Part No: BK35V)
$39.35

John Deere 620 Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX81, DLTX84, DLTX109u. 1/8 inch fuel inlet. For the following tractor models: 60, 620, 630. Add $200.00 core charge to price (will be added after order is placed when ordering online)- you will receive instructions for returning your core for a refund if you have one available. (Part No: 1520-CARB)
$290.50

John Deere 620 Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: DLTX94. 1/4 inch fuel inlet. For the following tractor models: 620. Add $200.00 core charge to price (will be added after order is placed when ordering online)- you will receive instructions for returning your core for a refund if you have one available. (Part No: 1521-CARB)
$290.50

John Deere 620 Choke Knob
Choke Knob
- For tractor models A, B, D, G, H, R, 50, 60, 70, 520, 530, 620, 630, 720, 730, 820, 830. (Part No: B1951R)
$18.60

No
Picture
Choke Rod
- For Model: 620 gas and all-fuel. (Part No: A5586R)
$32.06

John Deere 620 Fuel Filler Grommet
Fuel Filler Grommet
- 2-1/2" I.D., 4-1/2 O.D.. For tractor models early 50, 60, 70 and 60, 620, 630 orchard models. (Part No: A5137R)
$26.25

John Deere 620 Grommet, Fuel Filler, Black
Grommet, Fuel Filler, Black
- For tractor models 70, 620, 630, 720, 730, 1020, 1520, 2020, 3010, 3020, 4010, 4020, 5010. Measures 3 7/8 inch outside diameter, 2 1/4 inch inside diamter, and 3 1/2 inch diamter on underside lip. (Part No: A5157R)
$17.25

John Deere 620 Needle Valve
Needle Valve
- Viton Float Valve Needle, Seat and Gasket Assembly for some Marvel Schebler carburetors. For the following models: M, MC, MT, 320, 330, 40, 420, 430, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010. Replaces 233-543. (Part No: C3NN9D532A)
$5.12

John Deere 620 Precleaner Cover, Metal
Precleaner Cover, Metal
- 7" diameter with brass nut, fits Donaldson pre-cleaners. For tractor models Some 60, 70, 520, 530, 620, 630, 720, 730, (820, 830 3-cyl), (1010, 2020, 2520 diesel), 2010, 2030, 2040, 2150, 2155, 2240, 2255, 2355, 2440, 2510, 2630, 2640, 2840, 3010, 3020, 4000, 4010, (4020 gas or LP). (Part No: AF3583R)
$26.48

John Deere 620 Sediment Bowl Assembly
Sediment Bowl Assembly
- Large Bowl. 1/8 inch pipe thread to fuel line, 3/8 pipe to tank. For tractor models A, B, 60, 620, 70, 720, 730, 80, 820, 830. Fuel Strainer assembly with 2.25 inch bowl. This will replace the AUTOMATIC SHUT OFF assembly with a manual shut off for the late A and B models. Replacement bowl available as part S.65504. (Part No: S.61581)
$21.23

John Deere 620 Sediment Bowl Assembly
Sediment Bowl Assembly
- With Automatic shut-off. For tractor models (50 gas from SN# 5016133 and up), (A gas from SN# 584000 and up), (60 gas from SN# 6028469 and up), 520, 530, 620, 630, (70 gas from SN# 7006494 and up). (Part No: AA5777R)
$133.17

John Deere 620 Sediment Bowl Assembly Glass Bowl
Sediment Bowl Assembly Glass Bowl
- Glass bowl with an outside diameter is 2 1/8 and an overall height of 2 3/8. For the following models using a 2 3/8 inch tall glass bowl: A, AI, AO, AR, B, BO, BR, D, G, GP, GPO, H, 50, 520, 530, 60, 620, 630, 70, 720, 730, 2010, 4030, 4230. Replaces C1777R. (Part No: S.65504)
$5.43

John Deere 620 Sediment Bowl Gasket and Screen
Sediment Bowl Gasket and Screen
- This is a 2 Inch Outside Diameter Gasket and Screen. The Screen has a 3/8 Inch center hole. Replaces: L885T (Part No: 49923D)
$3.62

John Deere 620 Speed Control Plate with Linings
Speed Control Plate with Linings
- For tractor models 50, 60, 70, (520 up to SN# 5208099), (620 up to SN# 6213099), (720 up to 7214899). Replaces R227852. (Part No: AA6077R)
$27.75

John Deere 620 Speed Control Rod End Joint
Speed Control Rod End Joint
- Fits John Deere- [2510, 2520, 3010, 3020, 4000, 4010, 4020, 4030, 5010, 5020, 5200, 5400, 5440 (as a throttle speed control end joint; gas, lp, diesel)], 4230 (as a throttle speed control end joint; gas only), [50, 520, 530, 60, 620, 630, 70, 720, 730 (as a throttle speed control end joint; gas, lp, all fuel)], [5325N, 5425N, 5525N (as a PTO linkage end)], European: 5420 (as a throttle speed control end joint; gas, lp, diesel), Industrial 990 (as a throttle speed control end joint; gas, lp, diesel), 844 (as a throttle speed control end joint; gas, lp, diesel), [760, 760A, 762A, 860B, 862 (as a throttle speed control end joint; gas, lp, diesel)], [340D, 440C, 440D, 448D, 540B, 540D, 548D, 640, 640D, 648D, 740, 740A (as a throttle speed control end joint; gas, lp, diesel)], [500, 500A, 500B, 600, 700A (as a throttle speed control end joint; gas, lp, diesel)]; Replaces: AA5302R (Part No: AA5302R)
$9.23

John Deere 620 Vent Tube and Radiator Overflow Packing
Vent Tube and Radiator Overflow Packing
- This packing installs in the nut that is on either end of your vent tube or one end of your radiator overflow tube. It is used on John Deere A, B, D, G, 50, 520, 530, 60, 620, 630, 70, 720, 730, 80, 820, 830. Replaces John Deere Part Number B60R (Part No: B60R)
$.56

John Deere 620 Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- Fits various JD models. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13



John Deere 620 Choke Cable
Choke Cable
- Universal choke cable 72 inches long, 7/16 inch thread diameter. Being a universal may or may not look like the picture. May say "Choke" or "C" or nothing. (Part No: CC72)
$11.58

No
Picture
Choke Cable Swivel
- Choke cable swivel attaches the choke inner cable to the choke lever. Used on tractors with a choke cable. (Part No: CT28-49)
$15.00

John Deere 620 Fuel Filter, In-Line, 1\4 inch
Fuel Filter, In-Line, 1/4 inch
- Inlet 1/4 inch, outlet 1/4 inch, outside diameter 1-29/32 inches, length 4-1/16 inches. (Part No: 6511393)
$4.98

John Deere 620 Fuel Filter, In-Line, 3\8 inch
Fuel Filter, In-Line, 3/8 inch
- Inlet 3/8 inch, outlet 3/8 inch, outside diameter 1-29/32 inches, length 3-7/8 inches. (Part No: BF836)
$5.24

John Deere 620 Fuel Filter, In-Line, 5\16 inch
Fuel Filter, In-Line, 5/16 inch
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 1-29/32 inches, length 4-5/32 inches. (Part No: BF840)
$3.90

John Deere 620 Fuel Filter, In-Line, 5\16 inch, Clear
Fuel Filter, In-Line, 5/16 inch, Clear
- Inlet 5/16 inch, outlet 5/16 inch, outside diameter 2-1/8 inches, length 3-21/32 inches. (Part No: BF7736)
$2.45

John Deere 620 Fuel Tank Liner
Fuel Tank Liner
- For all fuel tanks. One quart Fuel Tank Liner covers tanks up to 12 gallons. Once cleaned, this tank liner will prevent further corrosion inside your tank. (Part No: R2043)
$37.65

John Deere 620 Fuel Tank Liner Kit
Fuel Tank Liner Kit
- Works on all metal gas tanks. use with gas or diesel fuels. Kit includes 1 qt cleaner, 1 qt prep solvent, and 1 qt tank liner which covers tanks up to 12 gallons. Includes application instructions. (Part No: NR1259)
$50.78

John Deere 620 Fuel Tank Screen
Fuel Tank Screen
- This Fuel Tank Screen is used with most stem-type sediment bowls to further protect against debris in the gas line. It has a 0.216 inch Insert Pipe outside diameter - 2.53 inch Overall Length. (Part No: R7949)
$9.90

John Deere 620 Fuel Tank Webbing, 3 Ft
Fuel Tank Webbing, 3 Ft
- Black woven nylon type material measures .042 inches thick, 15/16 inches wide and 3 foot section. (Part No: FTW494)
$4.13

John Deere 620 Lucas Fuel Treatment (quart)
Lucas Fuel Treatment (quart)
- Lucas Fuel Treatment is formulated for both gasoline and diesel engines, carbureted or fuel injected. It gives your fuel system what it really needs - a blend of super slick oils and additives with a high detergent action that allows the engine to operate at maximum efficiency. Also, it cleans and lubricates the carburetor and injectors and causes the fuel to burn more thoroughly for increased power and less fuel consumption. Lucas Fuel Treatment should definitely be used in vehicles that require leaded fuel because it actually replaces the benefits of lead in gasoline without causing harmful emissions. Use it to pass smog tests. Finally, it totally neutralizes the harmful effects of low sulfur diesel fuel.A powerful blend of oils and additives that contain no SOLVENTS. Designed to increase power and fuel mileage and also lower exhaust emissions through a more complete combustion. (Part No: LU10003)
$12.50

John Deere 620 Main Load Adjusting Needle Assembly
Main Load Adjusting Needle Assembly
- Used on Marvel Schebler carburetors TSX181, TSX221, TSX245, TSX332, TSX360, TSX374, TSX397, TSX413, TSX436, TSX505, TSX526, TSX530, TSX633, TSX641, TSX688, TSX689, TSX756, TSX768, TSX777, TSX792, TSX797, TSX97, this part replaces OEM numbers 10P70, 43-613, 43-622, 43-678, 43-699, RE9051. Verify your carburetor is among those listed before ordering. (Part No: CT43-622)
$37.50

John Deere 620 Sediment Bowl Gasket, 2-1\8 inch
Sediment Bowl Gasket, 2-1/8 inch
- For bowls with 2-1/8 inch diameter, 2.150 inch outside diameter. Made in the USA. (Part No: C1778R)
$1.95

John Deere 620 Stop Cable
Stop Cable
- This red knobbed Pull to Stop cable can be used as a stop cable, choke cable or any other functioning cable up to 72 inches in length. It does have a red pull knob that reads, "Pull to Stop". It has a usable cable length of 72 inches. (Part No: PTSTOP)
$8.18

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Fuel System / Air Intake

[Categories]   [All 620 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2021 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy