Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Salvage
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


John Deere 620 Parts

Category: Clutch

[Categories]   [All 620 Parts]   [All John Deere Models]  


John Deere 620 Clutch Adjusting Spring
Clutch Adjusting Spring
- This Clutch Adjusting Spring measures 1.915 inches long with a 0.120 inch wire thickness. The clutch disc adjusting spring mounts to the outer cast iron adjusting disc. Three used per tractor. Sold individually. (Part No: A352R)
$2.10

No
Picture
Clutch Bushing
- For tractor models 620, 630, 70, 720, 730. (Part No: F1390R)
$37.50

John Deere 620 Clutch Collar (Fork)
Clutch Collar (Fork)
- The collar has (2) inch slotted pivot holes, measures 0.313 of an inch in thickness, and has an inner diameter of 5 inches. For the John Deere 620 and 630. (Part No: R20181)
$181.13

John Deere 620 Clutch Cover
Clutch Cover
- For A after SN# 648000, G after SN# 13804, 60, 620, 630, 70, 720, and 730. Not painted. This part has an I.D. of 12.1875 inches by 1.0625 inches Thick. Please verify size before ordering. Does not include springs part number R5071. Also Replaces F821R. (Part No: F821)
$36.75

John Deere 620 Clutch Cover Spring
Clutch Cover Spring
- Comes with rivet, 3 required per tractor sold individually. For tractor models A, G, 60, 520, 530, 620, 630. Replaces: Rivet 16H644, Spring A6121R (Part No: A6121R)
$16.88

John Deere 620 Clutch Drive Disc, Sliding
Clutch Drive Disc, Sliding
- Sliding Drive Disc is 20 spline, 10 inch O.D. For tractor models 60, 620, 630, 70, 720, 730 tractors. (Part No: A4355R)
$62.09

John Deere 620 Clutch Drive Disk
Clutch Drive Disk
- 20 tooth, 6 spline, 9.940 inch diameter. For JD 620, 630 tractors. (Part No: A5642R)
$138.00

John Deere 620 Clutch Facing
Clutch Facing
- Pulley clutch facing. Floating. For tractor models A, G, 60, 70, 620, 630, 720, 730. 10 inch outside diameter, 6-3/4 inch inside diameter, 1.575 inch wide, .15 inch thick. For 60, 620, 630, 70, 720, 730, A, G. Replaces: C614R, R90215. PRICED EACH. If you order 1, you will receive only 1 clutch facing. (Part No: TP-C614R)
$11.99

John Deere 620 Clutch Facing, Pulley
Clutch Facing, Pulley
- Fits A serial number 648000 and up - 1 used per tractor, G - 1 used per tractor, 60 - 1 used per tractor, 70 - 2 used per tractor, 630 - 1 used per tractor, 730 - 2 used per tractor, AO serial number 273080 and up - 1 used per tractor, AR serial number 273080 and up - 1 used per tractor, D serial number 109944 and up - 1 used per tractor, 620 - 1 used per tractor, 720 - 2 used per tractor. Sold individually. Replaces AA6129R, AD1027R, AD752R, RE22932, RE29779. (Part No: AA6129R)
$49.57

John Deere 620 Clutch Handle Bushing
Clutch Handle Bushing
- Used with D2031R Clutch Handle Pivot Bolt, this bushing measures 0.750 inches inside diameter, 0.815 inches outside diameter, and 1.373 inches long. Replaces A1197R and R51192 Use on 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. (Part No: A1197R)
$7.49

John Deere 620 Clutch Handle Pivot Bolt
Clutch Handle Pivot Bolt
- The measurements on this Clutch Handle Pivot Bolt 0.750 inches O.D. to 0.625 inches O.D. 4-1/4 inches length. Replaces D2031R and R121197. Used on John Deere 2 cylinder models: A, G, 60, 70, 630, 730, AO, AR, BO, BR, D, GP, R, 80, 520, 530, 620, 720, 820, 830, 840. Uses Bushing A1197R (Part No: D2031R)
$13.75

John Deere 620 Clutch Operating Bolt
Clutch Operating Bolt
- 3 used per tractor, sold individually. For tractor models 60, 620, 630. (Part No: A4354R)
$39.38

John Deere 620 Clutch Pin
Clutch Pin
- Clutch linkage pin. Made in the USA, 9/16" diameter, 1/16" oversized to compensate for wear, use 9/16" drill to ream orginal hole, two used per tractor. For tractor models A, D, R, G, 60, 70, 520, 530, 620, 630, 720, 730. (Part No: D1994R)
$17.25

John Deere 620 Clutch Pulley
Clutch Pulley
- For tractor models 620, 630. (Part No: AA6729R)
$567.00

John Deere 620 Dog, Clutch
Dog, Clutch
- For tractor models 620, 630, 70, 720, 730, A, AO, AR, D, G, GH, GN, GP, GW. Trhee required per tractor. (Part No: C74R)
$34.13

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories]   [All 620 Parts]   [All John Deere Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2021 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy