Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford NAA (Golden Jubilee) Parts

[ Turn Off Pictures ]

[Categories]   [All Ford Models]   [Print]  


Brakes
Ford NAA Brake Adjusting Hole Cover
Brake Adjusting Hole Cover
- This brake adjusting hole cover is for tractor models 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, (2000, 4000 4 cylinder) all from 1948 to 1964. (Part No: H2092)
$2.95

Ford NAA Brake Backing Plate
Brake Backing Plate
- For 8N, NAA, Jubilee. Brake Backing Plate Restoration Quality, with felt seal. (Part No: 8N2255)
$75.93

Ford NAA Brake Backing Plate Felt Seal
Brake Backing Plate Felt Seal
- For tractor models 8N, NAA, Jubilee. This part repairs 1 wheel, 2 required per tractor. (Part No: 8N2217)
$3.95

Ford NAA Brake Camshaft Hole Cover Spring
Brake Camshaft Hole Cover Spring
- This brake camshaft hole cover spring is for tractor models 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948 to 1964). (Part No: 8N2322)
$2.50

Ford NAA Brake Cover
Brake Cover
- Cover, Brake Camshaft Hole. This is an EXACT reproduction of the ORIGINAL brake cover. For tractors: 8N, NAA (1948 TO 1954). (Part No: 8N2224)
$3.95

Ford NAA Brake Cross Shaft Bushing
Brake Cross Shaft Bushing
- Measures 1 inch long, 1 inch inside diameter and .010 thick. Press into transmission housing {one on each side}. Sold each. For tractors: 9N, 2N, EARLY 8N {1939-1949}. Fits some later Ford models, verify measurements to ensure fit. (Part No: 782477)
$4.95

Ford NAA Brake Cross Shaft Bushing
Brake Cross Shaft Bushing
- Measures the same as 782477 except only 1/2 inch long. Presses into transmission housing. For tractors: LATE 8N, NAA, Jubilee {1949-1954}. (Part No: C0NN2477)
$4.95

Ford NAA Brake Drum
Brake Drum
- For tractor models 8N, NAA, Jubilee. Additional $10.00 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 8N1126)
$113.30

Ford NAA Brake Drum Repair Kit
Brake Drum Repair Kit
- For tractor models 8N, NAA Jubilee. Replaces: 8N2027B Contains: anchor (2), H2041 adjuster screw, 8N2217 felt backing plate seal, 8N2048 adjuster socket, 8N2223 adjuster nut, 8N2049 adjuster spring, 8N2297B return spring, (8N2299 secondary spring. This spring is used on the left side only). Brake Hardware Kit for 1 wheel. 2 used per tractor. (Part No: 8NAA2250)
$33.98

Ford NAA Brake Drum Screw Kit
Brake Drum Screw Kit
- This Brake Drum Screw Kit contains 4 3/8 inch-16 x 3/4 inch screws, enough for one Brake Drum. Used on 8N and NAA, Jubilee. Order 2 sets per tractors. (Part No: 24667KIT)
$1.95

Ford NAA Brake Shoe Return Spring, RH Brake
Brake Shoe Return Spring, RH Brake
- This RH brake shoe return spring is for tractor models 8N, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 series (1948 to 1964). (Part No: NCA2204A)
$6.23

Ford NAA Brake Shoes, Set of 4
Brake Shoes, Set of 4
- Complete set of 4. For 8N, NAA, Jubilee. (Part No: 8N2200B)
$46.91

Ford NAA Brake Support Plate Stud
Brake Support Plate Stud
- This is an EXACT reproduction of the ORIGINAL brake support plate stud. For tractors: 8N, NAA (1948 TO 1953). (Part No: 350920S8)
$3.50

Ford NAA Parking Brake Lever
Parking Brake Lever
- For tractor models NAA, Jubilee, 600, 700, 800, 900 all from 1953-1957. (Part No: NAA2782A)
$23.45

Clutch
Ford NAA Clutch Alignment Tool
Clutch Alignment Tool
- 1-3/8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 1112-5996)
$7.56

Ford NAA Clutch Disc
Clutch Disc
- Clutch disk measuring 9 inches with a 1 3/8 inch hub and 10 splines. This is a 6 spring clutch. Fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Part No: 91A7550WHD)
$27.00

Ford NAA Clutch Disc
Clutch Disc
- This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3/8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Part No: NCA7550A)
$20.54

No
Picture
Clutch Disc 10 Inch
- Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 313299)
$96.38

Ford NAA Clutch Fork To Cross Shaft Pin
Clutch Fork To Cross Shaft Pin
- This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 352581S8)
$1.50

Ford NAA Clutch Kit, 9 Inch, Single Clutch
Clutch Kit, 9 Inch, Single Clutch
- This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 8N7563K)
$95.88

Ford NAA Clutch Pedal Arm Bushing
Clutch Pedal Arm Bushing
- For tractor models: 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002 inch inside diameter x 1-1/2 inches long. Minimum Order Qty is 2. (Part No: 8N7508B)
$4.95

Ford NAA Clutch Release Arm Kit
Clutch Release Arm Kit
- This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Part No: S.66657)
$54.45

Ford NAA Clutch Release Shaft Fork
Clutch Release Shaft Fork
- This Clutch Release Shaft Fork is used on Ford Tractors 1939 - 1954. Replaces original part number 487515, 48-7515. For models 9N, 2N, 8N, NAA and Jubilee. NOTE: This part is not made to OEM standards, and may require the bored holes to be honed slightly to fit. Unfortunately, we do not have a higher quality part available. (Part No: 487515)
$19.95

Ford NAA Clutch Shaft Bushing
Clutch Shaft Bushing
- This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Part No: 407508A)
$6.15

Ford NAA Pilot Bearing
Pilot Bearing
- This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)
$3.08

Ford NAA Pressure Plate
Pressure Plate
- This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Part No: 8N7563)
$90.95

Ford NAA Pressure Plate, 10 Inch, Single Clutch, New
Pressure Plate, 10 Inch, Single Clutch, New
- This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Part No: B8NN7563A)
$98.56

Ford NAA Release Bearing
Release Bearing
- This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .7969 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: N1087)
$17.93

Ford NAA Release Bearing Hub
Release Bearing Hub
- This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)
$42.74

Ford NAA Release Bearing Spring
Release Bearing Spring
- This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 9N7562)
$3.95

Cooling System
Ford NAA Fan Belt
Fan Belt
- Belt is 41 3/8 inches long. For tractor models: 8N late (with Side Mount Distributor), NAA 1952-1954, Jubilee. This belt also works with alternator conversion kit part number 8NL10300ALT. (Part No: 8N8620)
$10.52

Ford NAA Fan Blade - 4 Blade
Fan Blade - 4 Blade
- For tractor models 9N, 8N, NAA, Jubilee. Has 4 mounting holes on 3.125 inch centers. Diameter is 15.75 inch. (Part No: 8N8600A)
$33.47

Ford NAA Fan Blade, 6 Blade
Fan Blade, 6 Blade
- For 9N, 8N, 2N, NAA, Jubilee. 6 Blade Fan for extra cooling in those hotter climates. (Part No: 9N8600D)
$120.34

Ford NAA Fan Shroud
Fan Shroud
- This fan shroud is for tractor models: NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2110, 2111, 2120, 4000, 4110, 4120, 4121 all before 1965. This fan shroud is metal, and is made to fit original radiators. It must be slightly trimmed to fit aftermarket radiators lower pipe. (Part No: NCA8146A)
$62.79

Ford NAA Fan Shroud Hardware Kit
Fan Shroud Hardware Kit
- This fan shroud hardware kit is used for mounting original Fan Shrouds on Ford Tractors, 1939-1964. The kit includes 7 screws and 7 washers. Some models listed use less than 7. (Part No: 357622-K)
$1.95

Ford NAA Radiator
Radiator
- This radiator has 3 rows of tubes, stamped steel inlets and outlets, and it does not come with a cap. This radiator fits tractor models: NAA, 500, 501, 600, 800, 900, 2000, 4000 thru 1964, except HD ind. and fork lift. Also 172 inch, 192 inch power units. Replaces NCA8005B, C and NDA8005B. Core measurements Height: 17 inches. Width: 15-1/4 inches. (Part No: C5NN8005ABECON)
$222.46

Ford NAA Radiator
Radiator
- This is a restoration quality version of the radiator used on Ford 4 cylinder tractors, 1953-1964: Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2120, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140. Used on tractors without oil cooler in lower tank. Features a cast lower pipe, cap, drain tap (not shown) and overflow tube. Replaces C5NN8005AB, NCA8005B, NCA8005C, NCA8005D NAA-8005-B, NAA8005B (Part No: C5NN8005AB)
$269.95

Ford NAA Radiator Cap
Radiator Cap
- This radiator cap is a low pressure 4 psi cap. This radiator cap is for tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, series with 4 cylinder gas and diesel (1953 to 1964) except Majors. (Part No: 1T8100A2)
$6.09

Ford NAA Radiator Hose Clamp
Radiator Hose Clamp
- This radiator hose clamp is an EXACT reproduction of the ORIGINAL hose clamp. This radiator hose clamp is for tractor models 8N, 9N, 2N (1939 to 1954), NAA, Jubilee (2 per tractor, 1953 to 1954). For 1 3/4 inch to 2 inch outside diameter hoses. Also works on other Ford 4 Cylinder tractors through 1964. Priced each. Replaces 608287. PLEASE NOTE: Original hoses are usually thicker than current hoses available for many antique tractors. Measure your current outside diameter to ensure fit. You can add electrical tape to the ends to have these original style clamps effectively tighten on newer (thinner) hoses. (Part No: 608287)
$3.75

Ford NAA Radiator Hose, Lower
Radiator Hose, Lower
- This lower radiator hose goes from the water pump to lower radiator. Hose is 1 1/2 inch inside diameter. For tractor models 2000, 4000, NAA, 2N, EARLY 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 312588)
$5.34

Ford NAA Radiator Hose, Lower
Radiator Hose, Lower
- This Lower Radiator Hose is used on Ford 4 Cylinder tractors 1954-1964 with factory or converted to power steering. Replaces 313151 (Part No: 313151)
$9.71

Ford NAA Radiator Hose, Upper
Radiator Hose, Upper
- This upper radiator hose is for tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 Series. It can replace 310048. This hose measures 7 3/8 inches long, 1 1/2 inch outside diameter and 1 3/16 inside diameter. (Part No: NAA8260B)
$3.53

Ford NAA Radiator Mounting Bolt Kit
Radiator Mounting Bolt Kit
- These Radiator Mounting Bolts are used on aftermarket radiators to mount the radiator to the front support. Kit includes 2 Carriage Bolts, 2 Nuts, 2 Lock Washers and 2 Washers. For tractor models: 2000 4 cylinder, 2N, 4000 4 cylinder, 8N, 9N, Jubilee, NAA, NAB, 600, 601, 800, 801, 2030, 2031, 2120, 2130, 2131, 4030, 4031, 4120, 4121, 4130, 4131 4 cylinder. Replaces Nut 34670, 34090S, Flat Washer 44732, Lock Washer 34808, Carriage Bolt 351655S8. (Part No: 351641S8)
$5.63

Ford NAA Radiator Mounting Pads, Pack of 2
Radiator Mounting Pads, Pack of 2
- This pack of 2 radiator mounting pads is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 3000, 4000, 5000, 7000, 2600, 3600, 4600, 5600, 6600, 7600, 6700, 7700, 2310, 2610, 3610, 3910, 4610, 5610, 6610, 7610, 6710, 7710, 7810, 8010. Replaces B9NN8125A, 81811605 and C5NN8125A. Two are used per tractor on the bottom of the radiator. (Part No: 180705M1)
$3.69

Ford NAA Thermostat
Thermostat
- This thermostat is 160 degree lo-temp with gasket. For gas engines 1953 to 1964. (Part No: EAF8575BWG)
$9.14

Ford NAA Thermostat Housing
Thermostat Housing
- This thermostat housing is for tractor models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Gasket available as part number EAF8255A, please order separately. (Part No: 310031)
$46.48

Ford NAA Water Pump
Water Pump
- For NAA, Jubilee. Comes with Rear Cover Plate and Gasket. Replaces Part number CDPN8501B. (Part No: S.60663)
$44.78

Ford NAA Water Pump Cover Plate Gasket
Water Pump Cover Plate Gasket
- This pump cover plate gasket is for all 4-cylinders 1953-1964. Price is for each. (Part No: EAF8507B)
$1.40

Ford NAA Water Pump Kit
Water Pump Kit
- This water pump repair kit is for tractor models 8N, 9N, 2N, NAA, Jubilee (Part No: CPN8591B)
$51.05

Ford NAA Water Pump Mounting Gasket
Water Pump Mounting Gasket
- Gasket, water pump rear to cylinder block. Tractors: All 4-cyl, 1953-1964. (Part No: EAF8513A)
$0.96

Ford NAA Water Pump Pulley, Single Groove
Water Pump Pulley, Single Groove
- For tractor models NAA, Jubilee. Single Groove Water Pump Pulley. (Part No: EAF8509A)
$28.84

No
Picture
Water Pump Sealant
- RTV Blue 3.35 oz. tube. (Part No: PRM77BR)
$8.45

Decals and Emblems
Ford NAA Decal Set, Complete
Decal Set, Complete
- For tractor models NAA, Jubilee. (Part No: R4665)
$30

Ford NAA Ford Script Painting Mask
Ford Script Painting Mask
- This Ford script painting mask set includes 2 smaller 7-1/4 inch x 1-3/4 inch and 2 large 9 inch x 3 inch Ford script painting masks for tractor models: (NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960 1953-1957). Application instructions included. Note: the picture is to demonstrate what your finished result will look like it is not a picture of the mask itself. (Part No: S.67163)
$18.75

Ford NAA Hood Emblem
Hood Emblem
- For NAA. Just like original Hood Emblem. (Part No: C0NN16600)
$51.23

Ford NAA Hood Emblem for Jubilee
Hood Emblem for Jubilee
- For Golden Jubilee Model. Just like original (Part No: NAA16600A)
$48.53

Drive Train
Ford NAA Axle
Axle
- Rear Axle 8N, NAA, Jubilee. Total length is 32.25 inches. (Part No: 8N4235C)
$157.98

Ford NAA Axle Bearing Assembly
Axle Bearing Assembly
- For tractor models: 8N, 9N, 2N, NAA, Jubilee. This includes rear axle bearing (2N4221) and cup (9N4222). (Part No: S.18516)
$41.42

Ford NAA Axle Nut
Axle Nut
- 1.25 inch, 18 hex. For tractor models (8N 1948-1953), (NAA, Jubilee 1953-1955), NAB. (Part No: 8N4179)
$8.09

Ford NAA Axle Nut Lock Ring
Axle Nut Lock Ring
- For 8N 1948-1953, Jubilee and NAA. Snap Ring. Priced each. (Part No: 8N4187)
$2.22

Ford NAA Axle Nut and Snap Ring
Axle Nut and Snap Ring
- Kit, Nut and Snap Ring. For tractor models 8N, NAA. (Part No: CBPN4179A)
$11.07

Ford NAA Axle Nut, Clamp Lock Type
Axle Nut, Clamp Lock Type
- Clamp Lock Nut, rear axle, 1-1/4 inch. For 8N, NAA, Jubilee. This improved nut helps to prevent premature wear on both axle and hub. (The ring on the original type can fall out or rust out which allows the nut to come loose). This nut stays tight! Replaces CBPN-4179-A and 8N4187. (Part No: LN10-21)
$39.80

Ford NAA Axle Rear Bearing Race
Axle Rear Bearing Race
- This Tapered Bearing Cup is for models 4120, 600, 800, 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N4222)
$9.38

Ford NAA Axle Seal, Inner Pair, Pack of 2
Axle Seal, Inner Pair, Pack of 2
- This is a pair of seals. These seals measure 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Part No: 8N4233A)
$8.85

Ford NAA Axle Seal, Outer Pair
Axle Seal, Outer Pair
- For tractor models 8N serial number 486753 and up, NAA, Jubilee. Comes in pairs. 3-3/4 inch outside diameter, 2-7/8 inch inside diameter. (Part No: D5NN4115A)
$17.93

Ford NAA Axle Shaft Gasket
Axle Shaft Gasket
- For tractor models 8N, NAA, Jubilee all 1948-1954. Inside diameter 1 15/16 inches, outside diameter 2 3/16 inch. These were originally made of cork and all replacements are made from rubber. These must be replaced when the axle seals are replaced. (Part No: 8N4284)
$2.39

Ford NAA Center Housing Side Cover Gasket
Center Housing Side Cover Gasket
- The Center Housing Side Cover Gasket is used on NAA / Jubilee tractors, 1953-1954. Replaces original part number NAA4131B (Part No: NAA4131B)
$0.95

Ford NAA Countershaft
Countershaft
- For NAA, Jubilee. Countershaft. (Part No: NAA7111C)
$166.69

Ford NAA Differential Bearing and Cup
Differential Bearing and Cup
- This Differential Bearing and Cup is used on Ford 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA and other. Replaces original part numbers B4222, BB4222, BB4221B, 510884, 510892, 81709463, 83402421. (Part No: 195159M1)
$21.83

Ford NAA Differential Pinion Bearing Cone
Differential Pinion Bearing Cone
- For tractor models 2000 1965>, 2N 1939-1952, 3000 1965>, 4110 1965>, 600 with 4 speed transmission serial number <54165 - 1958, 5 speed transmission serial number <196155 - 1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed transmission serial number 106116> - 1960-1964, 8N 1939-1952, 9N 1939-1952, Dexta 1957-1964, NAA 1953-1954. Replaces BB4221B, 510884. (Part No: BB4221B)
$24.62

Ford NAA Differential Pinion Bearing Cup
Differential Pinion Bearing Cup
- Bearing Cup, Differential Bearing. For 2000, 2120, 2N, 3000, 4110, 600, 601, 8N, 9N, Dexta, Jubilee, NAA Replaces BB4222, BB4222B, 510892. (Part No: BB4222)
$12.93

Ford NAA Differential Pinion Bearing Cup, Front
Differential Pinion Bearing Cup, Front
- For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4/1962, NAA, Jubilee 1953-1954. (Part No: BB4616B)
$41.83

Ford NAA Differential Pinion Cone, Front
Differential Pinion Cone, Front
- Bearing, Tapered Cone. For tractor models 2N 1939-1952, 8N 1939-1952, 9N 1939-1952, Dexta 1957-4/1962, NAA, Jubilee 1953-1954. (Part No: BB4621B)
$72.56

Ford NAA Differential Pinion Pilot Bearing
Differential Pinion Pilot Bearing
- For tractor models 2120 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, 600 with 4 speed transmission serial number <54165 - 1958, with 5 speed serial number <196155 -1959, 601 with 4 speed transmission serial number 54166> -1958-1962, 5 speed serial number 106116> - 1960-1964, NAA, Jubilee 1953-1954. (Part No: 81T4625MA2)
$126.75

Ford NAA Gasket, Axle housing to center
Gasket, Axle housing to center
- Gasket center housing to rear axle housing. Tractors: NAA, 600, 2120, LCG (1953 and up). (Part No: NAA4036A)
$3.99

Ford NAA Gasket, Main Drive Gear Bearing Retainer
Gasket, Main Drive Gear Bearing Retainer
- For tractor models 8N, 9N, 2N, NAA, Jubilee, NAB. (Part No: 9N7086)
$.75

Ford NAA Gear Shift Boot
Gear Shift Boot
- Transmission Gear Shift Lever Boot. For tractors: 8N, 9N, 2N, NAA. Bottom hole is 1-1/2 inches in diameter. (Part No: 8N7277)
$5.95

Ford NAA Gear Shift Lever Spring
Gear Shift Lever Spring
- Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Part No: 9N7227B)
$5.95

Ford NAA Gear Shift Lever, with Knob, 4-Speed Transmission
Gear Shift Lever, with Knob, 4-Speed Transmission
- This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Part No: C5NN7202B)
$77.24

Ford NAA Gear Shift Pin
Gear Shift Pin
- This gear shift pin fits tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (>1965 ) with 3 and 4 speed transmission). (Part No: 9N7221B)
$4.13

Ford NAA Gear, 1st, 4 Speed Transmission
Gear, 1st, 4 Speed Transmission
- This transmission gear is the 1st gear, in the 4 speed transmission. It is 60/28 tooth, and is for tractor models 2000, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 3550, 4000, 4031, 4040, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB, Jubilee. (Part No: 8N7100)
$243.53

Ford NAA Gear, 2nd Transmission Countershaft
Gear, 2nd Transmission Countershaft
- Transmission countershaft second gear. For NAA, Jubilee. All 4-speed Ford transmissions (1953-1964), 8N (1948-1952). 17 teeth. (Part No: B9NN7114A)
$70.68

Ford NAA Gear, 3rd, 4 Speed Transmission
Gear, 3rd, 4 Speed Transmission
- This transmission gear is the 3rd gear in the 4 speed transmission. It is a 52 tooth gear. For tractor models 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3400, 3500, 4000, 4030, 4031, 4040, 4120, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 8N, NAA, NAB. All with 4 speed transmissions. (Part No: 8N7102)
$211.66

Ford NAA Gear, Mainshaft 2nd
Gear, Mainshaft 2nd
- This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Part No: B9NN7A381B)
$113.38

Ford NAA Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission
Gears, 2nd Mainshaft and Countershaft, 4 Speed Transmission
- This 2nd mainshaft gear and countersaft are for the the following tractors: 8N, NAA, Jubilee, 600, 800, 900, 2000, 4000 with 4 Cylinder Engines and 4 Speed Transmissions. Replaces B9NN7A381B and B9NN7114A. (R0625) (Part No: B9NN7A381B-set)
$170.18

Ford NAA Hub
Hub
- Rear Axle Hub 8N, NAA, Jubilee. With Studs. (Part No: 8N1171)
$55.99

Ford NAA Main Shaft Connecting Coupling
Main Shaft Connecting Coupling
- For tractor models 2000, 3000, 8N, NAA, Jubilee and others all with 4 speed transmission. Main shaft connecting coupling has 21 teeth, 16 spline. Replaces 83959995, 957E7106 (Part No: E6NN7106AA)
$61.96

Ford NAA Oil Seal, Main Drive Gear
Oil Seal, Main Drive Gear
- This main drive oil seal is for 3 and 4 speed transmissions on tractor models: 8N, 9N, 2N, 600, 700, 800, 900, NAA, NAB, Jubilee. Measures 2 inches outside diameter, 1.34 inches inside diameter and .332 inches wide. `` Replaces part number: 8N7052A, 8N7052A2, C0NN7C248A. (Part No: 8N7052A)
$4.56

Ford NAA Sherman Transmission External Lever
Sherman Transmission External Lever
- Step Up/Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Part No: 9N7210)
$93.09

Ford NAA Shift Cover Plate Gasket
Shift Cover Plate Gasket
- For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Part No: 8N7223)
$3.39

Ford NAA Shift Knob
Shift Knob
- ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Part No: BB7213A)
$4.58

Ford NAA Shim for Bearing Retainer
Shim for Bearing Retainer
- This is a Steel Shim, .020 thick. It has 12 holes. Will work in 6 hole applications. Fits Ford 8N, 9N, 2N, NAA and Jubilee, 8N4229F and 8N4229. More than one may be required when used as 8N4229F shim. Thickness 0.020 inches. Price is for each. (Part No: 183261M1)
$3.09

Ford NAA Shim, Gasket
Shim, Gasket
- Fits Ford 8N, 9N, 2N, NAA and Jubilee. Replaces 9N4130, 8N4229E and 8N4229. Used for seal between bearing retainer and axle housing or backing plate. More than one may be required when used as 8N4229 shim. Thickness 0.016 inches. Price is for each. (Part No: 9N4130)
$.69

Ford NAA Side Cover Gasket
Side Cover Gasket
- This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Price is for each. Replaces part number 9N4131. (Part No: 9N4131)
$.62

Ford NAA Transmission Bearing Cone
Transmission Bearing Cone
- Main Drive Shaft and Countershaft Bearing Cone for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7066)
$9.63

Ford NAA Transmission Bearing Cup
Transmission Bearing Cup
- Main Drive Shaft and Countershaft Bearing Cup for 3 and 4 speed transmissions. For tractor models 2000, 3000, 4000, 5000, 2N, 8N, 9N, 600, 700, 800, 900, NAA, NAB. (Part No: 9N7067)
$5.67

Ford NAA Transmission Drain Plug
Transmission Drain Plug
- Has 2.5 inch outside diameter. For tractors: 8N, 9N, 2N, NAA, {1939-1954}. Also filler plug for tractor: NAA {1953-1954}. Gasket available, order part number 8N7011. Replace 9N7010, 8N7010. For a magnetic version of this plug, order 8N7010 (Part No: 9N7010)
$7.16

Ford NAA Transmission Drain Plug, Magnetic
Transmission Drain Plug, Magnetic
- Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Part No: 8N7010)
$12.50

Ford NAA Transmission Rebuild Kit
Transmission Rebuild Kit
- For tractor models 9N, 2N and 8N with 3 and 4 speed transmissions (1939-1952). Will also work for Jubilee except for the transmission to rear end gasket. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. Contains (2) 9N7086, (1) 9N4662, (1) D5NN7223A, (1) 9N7223B, (1) 8N7052A, (1) 15385-TIM, (4) 25877, (4) 25820-TIM. Replaces: 9N7066, 86516471, 9N7086, 9N7086A, 9N7086GV, 9N7120, 9N7120GV, 81804773, 8N7052A, 8N7052A2, C0NN7052A, 83945495, 9N7067, 9N7067GV, 517512, 241336, 605188, 9605470, 9N4662, 9N4662GV, 9N7223, 9N7223B, 8N7223, D5NN7223A, E6NN7223BA, 83958318, 81817212. (Part No: TSBK3952)
$151.17

Ford NAA Transmission Rebuild Kit
Transmission Rebuild Kit
- For NAA (Golden Jubilee) 1953-54. This transmission bearing and seal kit contains seals, bearings and gaskets required for transmission rebuild. (Part No: TSBK5354)
$171.64

Electrical System
Ford NAA 12 Volt Conversion Kit
12 Volt Conversion Kit
- 12 Volt Conversion Kit - NAA, Jubilee. Includes rebuilt unicharge alternator with pulley, internal self exciting regulator, brackets, wiring harness, resistor and instructions. Updates older 6-volt tractors to 12-volt charging system. Does not require a 12 volt coil. Comes with everything needed to convert to a 12 volt starting system except for a battery. (Part No: NAA10300ALT)
$90.57

Ford NAA Alternator Adjustable Arm
Alternator Adjustable Arm
- Alternator Adjusting Arm. For alternator conversion on the following tractors (1953 to 1964): NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. (Part No: NAA10303)
$9.20

Ford NAA Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Part No: 2348258)
$33.75

Ford NAA Alternator Bracket, Base
Alternator Bracket, Base
- Base alternator bracket. For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. All 1953 to 1964. (Part No: NAA10302)
$10.74

Ford NAA Alternator Pulley
Alternator Pulley
- For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: AFD5035)
$10.74

Ford NAA Alternator, 12 Volt
Alternator, 12 Volt
- 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE)
$86.46

Ford NAA Battery Cable
Battery Cable
- For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Part No: FAE14301B)
$13.55

Ford NAA Battery Cable
Battery Cable
- For NAA, Jubilee, 600, 700, 800, 900. All 1953 and up. Cable, 9 inches long. (Part No: D1NN14300G)
$11.67

Ford NAA Battery Cable Cover
Battery Cable Cover
- Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Part No: 86H14321A)
$11.95

Ford NAA Battery Hold Down Bolt
Battery Hold Down Bolt
- Bolt with nut. For tractor models 8N, NAA (1948-1954). (Part No: 8N10728WN)
$4.50

Ford NAA Cable Clip
Cable Clip
- This Battery Cable Clip holds the solenoid-to-starter cable to the air cleaner tube. It fits a 1 5/8 inch air cleaner tube. Used on Ford Tractors, 1953 to 1964. (Part No: 1A13377A)
$2.95

Ford NAA Cable, Starter to Switch
Cable, Starter to Switch
- Switch to starter cable, 14-1/2 inches long and 2 gauge. For 9N, 2N, 601, 701, 801, 901, 600, 700, 800, 900, NAA, 2000, 2031, 2111, 2120, 2131, 4000, 4030, 4031, 4040, 4120, 4130, 4140, 501, 541. Replaces FAA14431B. (Part No: 9N14431B)
$10.67

Ford NAA Cigar Lighter Assembly
Cigar Lighter Assembly
- Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A)
$42.50

Ford NAA Coil - Six Volt
Coil - Six Volt
- This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 8BA12029)
$36.71

Ford NAA Coil Wire Assembly
Coil Wire Assembly
- This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Part No: 7RA14302)
$8.94

Ford NAA Coil, Ignition 12V
Coil, Ignition 12V
- Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Part No: D8JL12029A)
$9.92

Ford NAA Coil, Ignition 6V
Coil, Ignition 6V
- Standard 6 Volt Coil. Fits many models. (Part No: D4PE12029AA)
$19.61

Ford NAA Condenser
Condenser
- For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Part No: FET12300A)
$3.15

Ford NAA Distributor
Distributor
- With Slotted Drive Shaft. For tractor models NAA, Jubilee. Comes with cap, rotor, dust cover, points, condenser, etc, and ready to drop in. Replaces 86643560, FAC12127D (Part No: FAC1212D)
$140.00

Ford NAA Distributor Bushing
Distributor Bushing
- This Distributor Bushing is used on Ford tractors 1953-1964. Brass, measures 0.470 inch inside diameter x 0.596 inch outside diameter x 0.88 inches long. Replaces original part number 7RA12132A. (Part No: 7RA12132A)
$4.95

Ford NAA Distributor Bushing and Shim Kit
Distributor Bushing and Shim Kit
- Distributor Bushing and Shim Kit. fits tractor models all 1953 to 1964: 1801, 1811, 1821, 1841, 1871, 1881, 2000 4 cylinder, 2030, 2031, [2110, 2120, 4030, 4110, 4130, 4140 4-cylinder], 2111, 2121, 2130, 2131, 4000 4 cylinder, 4031, 4040, 4120, 4121, 4131, 501, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, NAB. Replaces: Roll pin part number 60132, bushing part number 7RA12132A, thrust washer part number FAA12179A, seal part numbers 12476 and D8NN12A118AA, O-ring part numbers 87055 and 134372. This is a 5-piece kit. NOTE: Bushing must be sized to the shaft after installation. (Part No: FDS3253)
$33.83

Ford NAA Distributor Cap Hold Down Clip
Distributor Cap Hold Down Clip
- This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Part No: 7RA12144)
$3.95

Ford NAA Distributor Cap, Clip Held
Distributor Cap, Clip Held
- Fits Tractors: 8N serial number 263844 (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Part No: NCA12106A)
$6.09

Ford NAA Distributor Clamp Rivet
Distributor Clamp Rivet
- This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)
$0.95

No
Picture
Distributor Driven Gear
- For tractor models NAA, Jubilee, 600, 800, 900, 2000, 4000. All 4 Cylinder. (Part No: FAD12390A)
$44.89

Ford NAA Distributor Dust Cap
Distributor Dust Cap
- Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Part No: FAA12239A)
$4.19

Ford NAA Distributor Point Set, 4-Cylinder
Distributor Point Set, 4-Cylinder
- For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: D8NN12171AA)
$4.53

Ford NAA Distributor Power Inlet Screw Kit
Distributor Power Inlet Screw Kit
- This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 350032-KIT)
$4.95

Ford NAA Distributor Primary Conductor
Distributor Primary Conductor
- Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 8N12209)
$5.40

Ford NAA Distributor Rotor Clip
Distributor Rotor Clip
- For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Part No: 8N12213)
$2.99

Ford NAA Distributor Rotor, Side Mount Distributor
Distributor Rotor, Side Mount Distributor
- 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C0NN12200A)
$2.27

Ford NAA Distributor, Breaker Plate
Distributor, Breaker Plate
- 4 Cylinder. Breaker Plate with points and condenser. For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: FAD12152A)
$42.35

Ford NAA Electronic Ignition Conversion Kit - 6V Negative Ground
Electronic Ignition Conversion Kit - 6V Negative Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series) 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt negative ground only. (Part No: 1244AN6)
$117.19

Ford NAA Electronic Ignition Conversion Kit, 12V Negative Ground
Electronic Ignition Conversion Kit, 12V Negative Ground
- Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)
$106.22

Ford NAA Electronic Ignition Conversion Kit, 12V Positive Ground
Electronic Ignition Conversion Kit, 12V Positive Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt positive ground only. (Part No: 1244AP12)
$117.19

Ford NAA Electronic Ignition Conversion Kit, 6V Positive Ground
Electronic Ignition Conversion Kit, 6V Positive Ground
- Use on the following tractors with 4-cylinder engines: Ford NAA, Jubilee, (500, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000 (with 134ci engine) and 4000 (with 172ci engine). This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)
$117.19

Ford NAA Generator Pulley
Generator Pulley
- This Generator pulley with keyway measures 0.671 inch hole inside diameter. The outside diameter of the pulley itself measures 3.690 inch and the keyway is .157 inch. The belt groove width measures .625 inch. Replaces: 86575379, FAC10130B. (Part No: FAC10130B)
$36.50

Ford NAA Generator, 6 Volt without Pulley
Generator, 6 Volt without Pulley
- This 6 Volt Generator was used on models 1800 Series, 2000 (4 cylinder 1962-1964), 2030, 2120, 2130, 4000 (4 cylinder 1962-1964), 4030, 4040, 4110TR, 4120, 4121, 4130, 4131, 4140, 501 SERIES, 600, 601 SERIES, 701 SERIES, 800, 801 SERIES, 900, 901, 6000. Uses FAG10505A regulator. Add $50.00 refundable core charge. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: C4NN10002A)
$337.69

Ford NAA Ignition Kit With Rotor - 4 Cylinder
Ignition Kit With Rotor - 4 Cylinder
- Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Part No: ATK7FAR)
$7.49

Ford NAA Ignition Tune-Up Kit And Maintenance Kit
Ignition Tune-Up Kit And Maintenance Kit
- For 8N (serial number 263844 and up), NAA, Jubilee (4 cylinder gas engine). Comprehensive kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, spark plugs, oil filter APN6731B, fuel sediment bowl assembly, and fuel filter, in-line, 5/16 inch . (Part No: TUNEMAINT8N)
$53.63

Ford NAA Key Switch
Key Switch
- For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Part No: 8N3679C)
$7.46

Ford NAA Resistor
Resistor
- For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Part No: 8NE10306)
$3.29

Ford NAA Rubber Grommet
Rubber Grommet
- Rubber Grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605)
$3.78

Ford NAA Spark Plug
Spark Plug
- For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: AL437)
$1.85

Ford NAA Spark Plug Wire Set, Custom, 4 Cyl.
Spark Plug Wire Set, Custom, 4 Cyl.
- For tractor models before 1965, 4 Cylinder, 90 degree boot, for 134 and 172 Gas Engines. Boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. Made in the USA. (Part No: CPN12259CUSTOM)
$12.69

Ford NAA Starter
Starter
- Starter, less drive, special Delco option 12 volt, clockwise rotation. DOES NOT LOOK LIKE ORIGINAL. For Jubilee, 2000, 4000, 501, 600, 700, 800, 900, NAA. (Part No: C3NF11002RXLD)
$103.28

Ford NAA Starter Boot
Starter Boot
- Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115)
$7.50

Ford NAA Starter Boot
Starter Boot
- Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 8N11113)
$3.95

Ford NAA Starter Drive
Starter Drive
- Drive assembly. For tractor models: 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: C1AF11350A)
$24.65

Ford NAA Starter Post Kit
Starter Post Kit
- This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Part No: A9AZ11102B)
$6.98

Ford NAA Starter Solenoid Assembly
Starter Solenoid Assembly
- This 6 or 12 Volt Starter Relay is for NAA, Jubilee, 600, 700, 800, 900, all 1953-1957. Flat mount, 3 post. Replaces: NCA11450A, DR1494, U925, U928, SW1, SW219 (Part No: NCA11450A)
$11.27

Ford NAA Starter Solenoid, 6 Volt
Starter Solenoid, 6 Volt
- This is a 4 post, 6 volt starter solenoid relay assembly. It has a flat mount. It replaces part numbers 311007FRGV, A604595, 311007, SW217, 311007FR. (Part No: 311007)
$13.65

Ford NAA Starter Switch
Starter Switch
- With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Part No: 8N11500WG)
$13.71

Ford NAA Starter with Drive
Starter with Drive
- This 3 Bolt Starter performs in 6 volt and 12 volt applications. Comes with drive, clockwise rotation. For 134, 144, 172, 192 4 cylinder gas or diesel, 6 or 12 volt systems 1952 through 1964. Replaces: C3NF11001B, C3NF11002D, C3NF11002E. (Part No: C3NF11002D)
$122.78

Ford NAA Terminal Block
Terminal Block
- For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Part No: 8NNN14448A)
$7.65

Ford NAA Tune Kit, Basic
Tune Kit, Basic
- This Basic Ignition Tune Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. Verify correct spark plug size and type. (Part No: 309787)
$12.66

Ford NAA Tune Kit, Comprehensive
Tune Kit, Comprehensive
- This Comprehensive Tune Kit is for 4 cylinder gas models 8N (serial number 263844 and up), NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, 1950 thru 1964. (4 Cylinder Gas Engines). Comprehensive Tune-Up Kit includes: Universal spark plug wire set, distributor cap, heavy duty point set, condenser, heavy duty rotor, and Autolite spark plugs (AL 437). (For use with original equipment distributors). Verify correct spark plug size and type. (Part No: TUNEKIT)
$33.66

Ford NAA Voltage Regulator
Voltage Regulator
- Voltage regulator, 12-volt. For tractor models NAA, Jubilee. (Part No: 8NE10307)
$46.77

Ford NAA Voltage Regulator, 12 Volt 22A Generator
Voltage Regulator, 12 Volt 22A Generator
- For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Jubilee. All 1953 to 1964. (Part No: C0NF10505A)
$24.65

Ford NAA Voltage Regulator, 6 Volt
Voltage Regulator, 6 Volt
- This 6 volt positive ground Regulator has 3 terminals (armature, field, battery). It is designed for "B" type circuits and has 10 to 12 output amps. For 1953-1964 GAS engine tractors: NAA, 1800, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: FAG10505A)
$18.47

Ford NAA Wiring Harness
Wiring Harness
- Fits NAA & Jubilee (1953 to 1954). Ignition harness only. (Part No: FAF14401B)
$16.38

Ford NAA Wiring Harness, 12 Volt Conversion
Wiring Harness, 12 Volt Conversion
- For tractor models NAA, Jubilee, 600, 700, 800, 900, 2000, 4000, 601, 701, 801, 901. All 1953 to 1964. (Part No: NAA10301)
$18.47

Engine Bearings
Ford NAA Main Bearing Set, 134, 144, 172 Engines, .010
Main Bearing Set, 134, 144, 172 Engines, .010
- For 134 144 and 172 4-cylinder Gas or Diesel engines (.010 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both PRE 1965). (Part No: MBK134172-010)
$45.00

Ford NAA Main Bearing Set, 134, 144, 172 Engines, .020
Main Bearing Set, 134, 144, 172 Engines, .020
- For 134, 144 and 172 4-cylinder Gas or Diesel engines (.020 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-020)
$49.53

Ford NAA Main Bearing Set, 134, 144, 172 Engines, .030
Main Bearing Set, 134, 144, 172 Engines, .030
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.030 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-030)
$43.13

Ford NAA Main Bearing Set, 134, 144, 172 Engines, .040
Main Bearing Set, 134, 144, 172 Engines, .040
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (.040 Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-040)
$57.33

Ford NAA Main Bearing Set, 134, 144, 172 Engines, STD
Main Bearing Set, 134, 144, 172 Engines, STD
- For 134, 144 and 172 4-cylinder Gas or Diesel engines. (STD Size). 1 kit used per engine. Contains center, front, and rear bearings. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: MBK134172-STD)
$50.34

No
Picture
Rod Bearing Pair, .001
- Rod Bearing Pair for 1 cylinder. .001 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312101-PAIR)
$19.47

No
Picture
Rod Bearing Pair, .002
- Rod Bearing Pair for 1 cylinder. .002 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312102-PAIR)
$8.70

No
Picture
Rod Bearing Pair, .010
- Rod Bearing Pair for 1 cylinder. .010 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312103-PAIR)
$9.00

No
Picture
Rod Bearing Pair, .020
- Rod Bearing Pair for 1 cylinder. .020 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: 312104-PAIR)
$8.25

No
Picture
Rod Bearing Pair, .030
- Rod Bearing Pair for 1 cylinder. .030 oversize. Fit 4 cylinder gas Models: 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6211B-PAIR)
$7.13

Ford NAA Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .010
- For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (.010 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312103-010)
$34.32

Ford NAA Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .020
- For 134 and 172 4-cylinder gas or diesel and 144 diesel engines (.020 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312104-020)
$34.32

Ford NAA Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .030
- For 134 and 172 4-cylinder gas or diesel and 144 diesel engines, (.030 size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312026-030)
$38.13

Ford NAA Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, .040
- For 134 & 172 4-cylinder gas or diesel and 144 diesel engines, (.040 size). 1 kit used per engine. For tractor models NAA, Jubilee, 501, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 both pre 1965). (Part No: CRK312026-040)
$32.18

Ford NAA Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD
Rod Bearing Set, 134, 144 and 172 Gas or Diesel, STD
- With journals measuring 2.298 inches. For 134 and 172 4-cylinder GAS or Diesel and 144 diesel engines, (STD size). 1 kit used per engine. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 both pre 1965). (Part No: CRK312026-STD)
$35.18

Engine Gaskets
Ford NAA Crankshaft Seal Kit, Rear
Crankshaft Seal Kit, Rear
- This Improved Rear Crankshaft Seal Kit includes detailed instructions. Fits Ford tractors with 134, 172 or 144 Gas, LP or Diesel Engines. Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 Cylinder, 4000 4 Cylinder. 6000 6 Cylinder. Through 1964. Replaces: 84186689, B3NN6336A, C0NN6336A, C0NN6701A, EBU6701A. (Part No: C0NN6701AKIT)
$33.06

Ford NAA Crankshaft Seal, Front
Crankshaft Seal, Front
- This Front Crankshaft Seal is for the following models: 2000 and 4000 (before 1964), 600, 601, 700, 701, 800, 801, 900, 901. Used on 134, 144, 172, 192 4-cylinder, 223, 242 cubic inch gas, LP and diesel engines. C0NN6700A, EAA6700B, EAF6700B. (Part No: EAA6700B)
$4.86

Ford NAA Crankshaft Seal, Rear Pair, Pack of 2
Crankshaft Seal, Rear Pair, Pack of 2
- Comes in halves. 2 needed for complete seal. Fits 134 CID, 172 CID gas and 175 CID diesel engines. For tractor models 2000 up to 1964, 4000 1962 to 1964, 500, 600, 700 Series, 800 Series 1955 to 1957, 801 Series 1958 to 1962, 900 Series 1955 to 1957, 901 Series 1958 to 1962, NAA, Jubilee. (Part No: C0NN6701A)
$11.40

Ford NAA Front Crankshaft Wear Sleeve
Front Crankshaft Wear Sleeve
- This Front Crankshaft Wear Sleeve is used in Ford 4 cylinder gas and diesel engines: 134, 144, 172 CID, built from 1953-1964. It is used to repair wear where the front crank shaft seal goes into the front timing cover. (Part No: RP301112)
$42.18

Ford NAA Head Gasket 134\172 Gas
Head Gasket 134/172 Gas
- Head Gasket, non-metallic used with 1/2 inch or 7/16 inch head bolt holes. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6051D)
$19.98

Ford NAA Main Bearing Cap Packing Material, V-Style, Pack of 2
Main Bearing Cap Packing Material, V-Style, Pack of 2
- For 134 and 173 CID Engines, 1953 to 1964. (Part No: B3NN6336A)
$5.67

Ford NAA Oil Pan Gasket
Oil Pan Gasket
- Fits 134 gas and 172 gas and diesel engines in: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6710B)
$4.98

Ford NAA Overhaul Gasket Set
Overhaul Gasket Set
- This Full Overhaul Gasket Set comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed for models NAA, Jubilee, 600, 700 (134 cubic inch engine). All with gas engines and 7/16 inch head bolts from 1953 to 1957. (Part No: CPN6008HM)
$55.53

Ford NAA Overhaul Gasket Set Less Head Gasket 134\172 Gas
Overhaul Gasket Set Less Head Gasket 134/172 Gas
- Comes with rope crankshaft seals, does not come with the 2 C0NN6701A rear main seals, if needed. For tractor models: NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. Does NOT include Head Gasket. (Part No: CPN-FPN)
$39.41

Ford NAA Push Rod Side Cover Gasket
Push Rod Side Cover Gasket
- For all 4 cylinder gas or diesel models built between 1953-1964. (Part No: EAF6521D)
$6.53

Ford NAA Pushrod Side Cover Grommets, Pack of 3
Pushrod Side Cover Grommets, Pack of 3
- Pushrod Side Cover Grommets, package of three. Three used per tractor. Fits Ford 4 cylinder gas, LP and diesel 1953 thru 1964. Replaces original part numbers C0NN6589A and EAF6589A. (Part No: C0NN6589A)
$6.21

Ford NAA Seal
Seal
- Hydraulic Pump Shaft Oil Seal. Inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For 2000, 4000, 600, 700, 800, 900, NAA. C5NN851A (Part No: NCA851A)
$5.01

Ford NAA Timing Gear Front Cover Gasket
Timing Gear Front Cover Gasket
- For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. All gas or diesel 1953 to 1964. (Part No: EAF6020B)
$2.09

Ford NAA Upper Engine Gasket Set
Upper Engine Gasket Set
- Metal head gasket for 1/2 inch or 7/16 inch bolt holes. For tractors: NAA, 600, 700; 134 CID engine (1953-1957). (Part No: VGCPNM)
$66.47

Ford NAA Valve Cover Stud Grommet, Pack of 2
Valve Cover Stud Grommet, Pack of 2
- This Valve Cover Stud Grommet is used on Ford 4 Cylinder tractors built from 1953-1964. Two used per tractor. Replaces: EAF6570A (Part No: EAF6570A)
$6.66

Ford NAA Valve Cover Vent Breather Gasket
Valve Cover Vent Breather Gasket
- This Gasket for the Valve Cover Vent Breather measures 2 3/4 inches outside diameter. The gaskets first 134, 172 and 192 gas, LP and diesel 4 cylinder engines from 1953 to 1964. For tractor models: NAA, Jubilee, 1801, 2000, 4000, 501, 600, 601, 700, 701, 800, 900, 901. (Part No: EAF6863C)
$1.58

Ford NAA Valve rocker arm cover gasket.
Valve rocker arm cover gasket.
- Valve Rocker Arm Cover Gasket. For FORD TRACTORS: NAA, Jubilee, NAB, 2000, 2031, 2111, 2120, 2131, 4000, 4000SU, 4030, 4031, 4040, 4110TR, 4120, 4121, 4130, 4131, 500 SERIES, 600 SERIES, 700 SERIES, 800 SERIES, 900 SERIES. Also fits Ford Industrials: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2130. (Part No: EAF6584C)
$7.40

Engine Rebuild Kits
Ford NAA Basic Engine Overhaul Kit, 134 Gas
Basic Engine Overhaul Kit, 134 Gas
- 134 CID 4 cylinder gas. Contains, sleeves, pistons, rings, pins & retainers, pin bushings, complete gasket kit. Bearings are available, must be ordered separately. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700. (Part No: BEKF114AM-LCB)
$342.59

Ford NAA Engine Overhaul Kit with New Crankshaft
Engine Overhaul Kit with New Crankshaft
- Comprehensive kit for the 134 cubic inch gas engine with 3.4375 inch bore, 7/16 inch head studs. Tractors 1953 to 1957. Includes: pistons, wrist pins, wrist pin bushings, piston rings, liners, connecting rod bearings, top and bottom gasket sets. PLUS: main bearings, thrust washers, front and rear seals. Kit INCLUDES NEW CRANKSHAFT. For tractor models NAA, 600, 700. (Part No: EKMC123)
$979.49

No
Picture
Engine Overhaul Kit, 134 Gas
- 134 CID 4 cylinder gas 3-7/16 inch standard bore with slotted drive. Complete overhaul kit for NAA, Jubilee. Contains complete gasket set, standard camshaft timing gear, intake and exhaust valves with guides, locks and springs, oil filter, upper radiator hose, lower radiator hose, air cleaner-to-carb hose, sleeve and piston kit, oil pump kit, fan belt, carburetor repair kit, spark plug set, point set and condenser. Bearings are available, must be ordered separately. (Part No: NAAK-LCB)
$531.12

No
Picture
In Frame Overhaul Kit, 134 GAS
- For NAA, 600, 700. All with 134 CID 4 cylinder gas engine 1953 to 1957. Includes: Super power set 3 1/2 inch overbore PK110 sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF110M)
$311.56

Ford NAA In-Frame Engine Kit, 134 Gas
In-Frame Engine Kit, 134 Gas
- For NAA, 600, 700. All with 134 CID 4 cylinder gas engine 1953 to 1957, 3-7/16 inch standard bore. Includes: CPN6055A sleeve and piston kit with rings, pins, and retainers, VGCPNM upper gasket set with head gasket, EAF6710B crankcase oil pan gasket. (Part No: BIFF114AM)
$247.59

Ford NAA Valve Service Kit
Valve Service Kit
- For servicing one engine with valve related parts when only valve refacing is required. Kit contains: springs, key and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 TO 1964). (Part No: VSKF134G)
$55.20

Ford NAA Valve Train Kit, 134 CID Gas
Valve Train Kit, 134 CID Gas
- For servicing one engine when valve replacement is necessary. Kit contains: valves, springs, keys and guides. (Gasket set VGCPNM must be ordered separately). For NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, (1953 TO 1964). (Part No: VOKF134G)
$113.16

Engine Parts
Ford NAA Camshaft Hydraulic Pump Drive Gear
Camshaft Hydraulic Pump Drive Gear
- For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Part No: EAF907B)
$58.03

Ford NAA Camshaft Kit, Camshaft and Lifters
Camshaft Kit, Camshaft and Lifters
- Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Part No: 734145)
$276.00

Ford NAA Camshaft Timing Gear, STD
Camshaft Timing Gear, STD
- Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Part No: EAF6256M)
$46.70

Ford NAA Camshaft, New
Camshaft, New
- Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Part No: C0NN6251A)
$152.35

Ford NAA Connecting Rod Nut
Connecting Rod Nut
- This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 7HA-6212)
$0.95

Ford NAA Crankshaft Gear
Crankshaft Gear
- This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: EAF6306B)
$47.51

Ford NAA Crankshaft, 4cyl Gas
Crankshaft, 4cyl Gas
- Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Part No: D1NL6303D)
$542.53

Ford NAA Cylinder Head, NEW
Cylinder Head, NEW
- For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For tractor models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Includes Guides and Seats. Does not include valves, or springs. Replaces D3JL6049B, 310098, 310100 (Part No: D3JL6049B)
$774.41

Ford NAA Flywheel Bolt Kit
Flywheel Bolt Kit
- From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Part No: 350645S)
$25.71

Ford NAA Governor Assembly
Governor Assembly
- This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Part No: EAF12470A)
$81.25

Ford NAA Governor Ball
Governor Ball
- These are 3/4 Inch Governor Balls used in production 1952-1958. Later style governors did not use these, and many older tractors have upgraded governors without ball bearings. Replaces part numbers 86624946, 8NNN18229 (Part No: 8NNN18229)
$0.89

Ford NAA Governor Compensating Spring
Governor Compensating Spring
- Mounts between bellcrank and underneath battery tray. For tractor models NAA, Jubilee. (Part No: NAA9827B)
$5.69

Ford NAA Governor Shaft Oil Seal
Governor Shaft Oil Seal
- Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Part No: EAF18183B)
$7.14

Ford NAA Lifter
Lifter
- Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Part No: F3JL6500AA)
$9.95

Ford NAA Push Rod, 5\16 Diameter
Push Rod, 5/16 Diameter
- If replacing 1/4 inch outside diameter push rod (early 134 engines), you must also order number 87801302 rocker adjusting screw and F3JL6500AA Lifter. This push rod measures 9.61 inches overall length and 5/16 inch outside diameter. For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Part No: 500356)
$12.41

Ford NAA Ring Gear, Flywheel
Ring Gear, Flywheel
- Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Part No: 9N6384)
$27.72

Ford NAA Tappet
Tappet
- For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Part No: EAA6500D)
$10.43

Ford NAA Timing Gear Set
Timing Gear Set
- Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Part No: EAF6256MSTD)
$87.74

Ford NAA Valve Key, Intake and Exhaust, Pack of 8
Valve Key, Intake and Exhaust, Pack of 8
- 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine (2 packages of 8). Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 7HA6518)
$2.40

Ford NAA Valve Spring
Valve Spring
- Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Part No: EAA6513A)
$2.40

Ford NAA Valve Stem Cap, Exhaust
Valve Stem Cap, Exhaust
- This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Part No: 8EQ6550A)
$5.00

Ford NAA Valve, Exhaust
Valve, Exhaust
- Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: EAF6505D)
$7.79

Ford NAA Valve, Exhaust
Valve, Exhaust
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: EAF6505D)
$7.79

Ford NAA Valve, Exhaust, 172 CID Gas
Valve, Exhaust, 172 CID Gas
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6505D)
$7.79

Ford NAA Valve, Intake
Valve, Intake
- Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EBU6507A)
$5.88

Engine Pistons and Sleeves
Ford NAA Piston with Pin
Piston with Pin
- The original bore on a 134 CID gas engine is 3.4375 inches. This piston is for a 3.5000 inch overbore. Includes piston, pin and retainers. For rings, order part number PRS110. (Part No: EAE6108FOB)
$12.50

Ford NAA Piston, .020 Overbore, 134 CID Gas Engine
Piston, .020 Overbore, 134 CID Gas Engine
- Overbore .020 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 500, 501, 600, 601, 700, 701, 2000. (Part No: EAE6108H)
$47.17

Ford NAA Piston, .030 Overbore, 134 CID Gas Engine
Piston, .030 Overbore, 134 CID Gas Engine
- Overbore .030 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 501, 600, 601, 700, 701, 4000. (Part No: EAE6108J)
$48.19

Ford NAA Piston, .040 Overbore, 134 CID Gas Engine
Piston, .040 Overbore, 134 CID Gas Engine
- Overbore .040 inch 3-ring piston (Rings NOT included) with pin and locks. Note: Bore sleeveless engines when installing oversize pistons and rings. For the following models using 134 CID gas engine (1953-1964): NAA, 501, 600, 601, 700, 701, 4000. (Part No: EAE6108K)
$63.56

Ford NAA Piston, Standard, 134 CID Gas Engine
Piston, Standard, 134 CID Gas Engine
- Standard 3-ring piston (Rings NOT included) with pin and locks. For the following models using 134 CID gas engine (1953-1964): NAA, Jubilee, 500, 501, 600, 601, 700, 701, 4000. (Part No: EAE6108F)
$31.94

Ford NAA Sleeve
Sleeve
- Standard sleeve for 134 CID gas engine. For tractor models: 500, 501, 600, 601, 700, 701, NAA, 2000. Replaces B3NN6055A. (Part No: EAE6055E)
$30.77

Ford NAA Sleeve & Piston Kit - 134 Gas - Super Power Set
Sleeve & Piston Kit - 134 Gas - Super Power Set
- This Sleeve and Piston Kit is for 134 CID Gas engine. 3-1/2 inch overbore for increased power, authothermic pistons, chrome top rings, chrome steel segment oil rings. For 2000, 501, 600, 601, 700, 701, NAA. (Part No: PK110)
$345.00

Engine Rings
No
Picture
Piston Ring Set
- For 2000, NAA, 501, 600, 700. 3.5 inch bore, 2 Compression @ 3/32, 1 Oil @ 3/16. Set for 1 engine. (Part No: PRS110)
$32.45

No
Picture
Piston Ring Set, 134 Gas, .030
- Complete overbore 3-ring set cast iron. For 2000, 600, 601, 700, 701, NAA. All with 3 7/16 inch bore 134 gas engine. .030 inch oversize set has 2 compression rings at 3/32 inch and oil ring at 3/16 inch. (Part No: EAE6149B)
$60.49

No
Picture
Piston Ring Set, 134 Gas, STD
- Standard 3-ring set cast iron. Complete set for 1 engine. For 2000, 600, 601, 700, 701, NAA. All with 3 7/16 inch bore 134 gas engine. 2 compression rings at 3/32 inch and oil ring at 3/16 inch. (Part No: CPN6149B)
$35.93

Ford NAA Piston Ring Set, 134 Gas, STD, Chrome Top Ring
Piston Ring Set, 134 Gas, STD, Chrome Top Ring
- For Four Cylinders. Standard 3-ring set with chrome top ring. For 2000, 501, 600, 601, 700, 701, NAA. All with 3 7/16 inch bore 134 gas engine. 2 compression rings at 3/32 inch and oil ring at 3/16 inch. (Part No: EAE6149A)
$47.88

Exhaust System
Ford NAA Elbow to Exhaust Manifold Gasket
Elbow to Exhaust Manifold Gasket
- Fits 134 CID Gas Engines 1953 to 1964 on models: NAA, 600, 601, 700, 701. 172 CID Gas Engines 1955 to 1957 on models: 800, 801, 900, 901, 2000, 4000. Use with elbow NAA55250B and muffler NAA5230E. **Price per each. (Part No: NAA55232A)
$1.34

Ford NAA Exhaust Elbow With Gasket
Exhaust Elbow With Gasket
- Outlet is 1 5/8 inch outside diameter. For 2000, 501, 600, 601, 700, 800, 801, 900, 901, 1800, 1801, NAA. All with 134 or 172 CID engine. Replaces NAA55250B (Part No: NAA55250BWG)
$34.22

Ford NAA Exhaust Pipe, Horizontal
Exhaust Pipe, Horizontal
- Outlet pipe extension, rear straight section. For: NAA, 2000 (1963-1964), 501, 600, 601, (1958-1962 with 134 gas engine), 700, 701 (1958-1962 with 134 gas engine), 800 (1955-1957 with 172 gas engine). Dimensions: Inlet inside diameter 1-1/2 inch, length 54 inch, outlet outside diameter 1-1/2 inch. (Part No: NCA5263B)
$19.28

Ford NAA Exhaust Pipe, Horizontal
Exhaust Pipe, Horizontal
- This is a single piece exhaust pipe used from muffler to tailpipe. It replaces NCA5255B and NCA5263B as a single pipe. 1 1/2 inch inlet inside diameter, 1 1/2 inch outlet outside diameter, 78 inch overall length. (Part No: R1613)
$33.45

Ford NAA Extension Pipe
Extension Pipe
- Vertical Two-Piece Exhaust Pipe with Clamps, less muffler. Use without muffler for straight through design for maximum exhaust flow and more power. Pipe inlet 1-5/8 inch inside diameter, outlet 1-3/4 inch outside diameter. For 2000, 4000, 501, 600, 700, 800, 900, NAA, Jubilee. (Part No: M105)
$28.16

Ford NAA Intake and Exhaust Manifold Gasket
Intake and Exhaust Manifold Gasket
- For Gas Engine Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All from 1953-1964. Price is for each, 2 needed per tractor. (Part No: C0NN9448C)
$2.49

Ford NAA Manifold Nut and Washer Kit
Manifold Nut and Washer Kit
- This Brass Manifold Nut and Washer Kit is used on Ford 134 and 172 gas engines from 1953 to 1964. For models NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 and 4000. One set per tractor. (Part No: 33817-KIT)
$7.50

Ford NAA Manifold, Gas
Manifold, Gas
- Intake and Exhaust Manifold. For 4 Cylinder Gas Engines in NAA, Jubilee, 600, 601, 700, 800, 801, 900, 901, 2000, 4000. Replaces EAE9425C, 312556, B9NN9425A. Carburetor mounting holes are slotted to accommodate different carburetors. Comes with mounting gasket and 2 elbow gaskets. (Part No: TFM9425WG)
$114.25

Ford NAA Muffler & Pipe Assembly, Vertical
Muffler & Pipe Assembly, Vertical
- For the following 134 CID gas tractors: NAA, Jubilee, 501, 600, 700, 4-cylinder 2000 series, ALL 1953-1964. For the following 172 CID gas tractors: 800, 900, ALL 1955-1957 and the 4-cylinder 4000 series 1958-1964. This is a vertical two-piece muffler and pipe, includes clamp. Custom design ready for assembly. Pipe inlet 1-5/8 inch inside diameter (verify that you have a 1 5/8 inch exhaust elbow), outlet 1-3/4 inch outside diameter. The order of this exhaust system is exhaust elbow (not included) exhaust pipe, then muffler above the hood. (Part No: M103)
$41.50

Ford NAA Muffler Heat Shield
Muffler Heat Shield
- This is Muffler Heat Shield is exactly like the original. It is used on Ford Tractors with 134, 172 and 192 4-cylinder gas and diesel engines, 1953 - 1964. It is 25-3/4" long. Has a red powder coat finish. Replaces original part number NCA5290A (Part No: NCA5290A)
$43.56

Ford NAA Muffler, Horizontal
Muffler, Horizontal
- For tractor models NAA, Jubilee, 501, 600, 601, 700, 4-cylinder 2000 (1953-1964), 800, 900, (1955-1957), 4-cylinder 4000 Series (1958-1964). All with 134 or 172 CID gas engines. Dimensions: Inlet tube length 2-1/4 inch, inlet tube 1-5/8 inch ID, shell length 13 inch, shell diameter 3-1/4 inch, outlet tube length 2-1/4 inch, outlet tube outside diameter 1-5/8 inch OD, muffler overall length 17-1/2 inch. (Part No: NAA5230E)
$19.20

Ford NAA Vertical Exhaust Pipe
Vertical Exhaust Pipe
- This Vertical Exhaust Pipe comes with support bracket. It does not come with a muffler. Pipe inlet 1-3/8 inch I.D., outlet 1-1/2 inch. It is for gas models NAA, 500, 501, 600, 700, (4 cylinder 2000 and 4000 1953 to 1964), 800, 900. All with the 134 and 172 cubic inch engines. (Part No: NAA55237A)
$32.81

Ford NAA Vertical Muffler & Pipe Assembly
Vertical Muffler & Pipe Assembly
- For tractor models 1964 and earlier 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA, Jubilee. Vertical Muffler and Pipe assembly has 1 11/16 inch inlet and 1 3/4 inch outlet. This is one piece welded construction. $20.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. FO-21 (Part No: FD2110)
$54.76

Fuel System / Air Intake
Ford NAA Air Cleaner Assembly
Air Cleaner Assembly
- For NAA, Jubilee, 600. Restoration Quality Air Cleaner Assembly. Includes cup. "HH" stamped into upper cylinder. 7-1/4 inches center to center bolt pattern. 15-1/2 inches tall Also replaces EAE9600D, EAE9600E. (Part No: 312917)
$109.08

Ford NAA Air Cleaner Clip
Air Cleaner Clip
- For tractor models NAA, Jubilee, 600, 700, 800, 900. Not exactly like original, works the same. (Part No: 9N9678)
$4.50

Ford NAA Air Cleaner Cup
Air Cleaner Cup
- This new air cleaner oil cup measures 5 inches outside diameter at the lip and is 3-1/8 inches tall. This cup is used for the clip type air cleaner (not the clamp type). Please measure your cup prior to ordering. Fits on bottom of 8N9600B air cleaner on 8N. Gasket 9N9623B available separately. On the 800 and 900 series tractors, it is serviceable. It will look different but fit fine. Replaces: 8N9658, 8N9658C, Serviceable for: B9NN9658A. (Part No: S.61648)
$35.25

Ford NAA Air Cleaner Cup
Air Cleaner Cup
- For tractor models NAA, Jubilee, 600, 700, 800, 900. 4 7/8 inch diameter, 3 5/8 depth. Replaces OEM # B5NN9658A. (Part No: S.60583)
$23.85

Ford NAA Air Cleaner Cup Gasket
Air Cleaner Cup Gasket
- For air cleaners with toggle clamps on side of air cleaner (14-3/4 inches long). Use with Air Cleaner Cup S.61648 and S.60583. For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 9N9623B)
$3.95

Ford NAA Air Cleaner Filler
Air Cleaner Filler
- Fits many air cleaners that use steel wool type filler. Custom manufactured mesh. 1 bag = 3-1/2 inch x 3-1/4 inch. (Part No: S.43231)
$10.29

Ford NAA Air Cleaner Funnel Screen
Air Cleaner Funnel Screen
- Air Cleaner Funnel Screen is for tractor models NAA, Jubilee, 600, 601, 701, 800, 801, 900, 901, 2000, 4000. (1953-1964). TIS (Part No: NAA9669A)
$3.75

Ford NAA Air Cleaner Hose Clamp
Air Cleaner Hose Clamp
- Clamp, air cleaner to carburetor pipe. Tractors: 8N, 9N, 2N, NAA (1939-1954). For 2 inch outside diameter hoses +/- 1/8 inch. (Part No: 9N9653)
$2.50

Ford NAA Air Cleaner Tube
Air Cleaner Tube
- Has 1 5/8 inch outside diameter. For tractor models NAA, Jubilee, 601, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 gas and LP 1953 and up. Requires two 9N9652 air hoses, not included. (Part No: EAE9620B)
$33.45

Ford NAA Air Funnel
Air Funnel
- For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900 950, 960, (2000, 4000 ALL < 1964). (Part No: NAA9684A)
$32.40

Ford NAA Air Hose to Carburetor - 1.5 Inches
Air Hose to Carburetor - 1.5 Inches
- For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 1939-57 gas tractors. Rubber Air Hose is 2 3/8 inches long, 1 1/2 inch inside diameter. (Part No: 9N9652)
$1.97

Ford NAA Caraburetor Main Adjustable Needle
Caraburetor Main Adjustable Needle
- Main adjusting needle. For tractor models 501, 600, 700, 800, 900, NAA. (Part No: EAE9565A)
$6.54

Ford NAA Carburetor Butterfly
Carburetor Butterfly
- Fits Marvel Schebler TSX33, TSX241, TSX241A, TSX241B, TSX241C, TSX420. For tractor models NAA, NAB, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: 9N9585A)
$3.54

Ford NAA Carburetor Elbow & Strainer
Carburetor Elbow & Strainer
- For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600 series, 700 series, 800 series. VERIFY FITTING DIMENSTIONS. Fits Marvel and some Carter UT Series carburetors. Used with flair fitting, not compression fitting. Male end (screen end) is 1/8 inch pipe threads. Female end is 1/4 inch flair. (Part No: 9N9553)
$5.13

Ford NAA Carburetor Float
Carburetor Float
- This carburetor float is 2.25 inches wide and is used for the following tractor models: 8N, 900, NAA, and Jubilee all using Zenith carburetor models: 10850, 13876, 13877, 12493, and 13879. (Part No: CTP28)
$18.06

Ford NAA Carburetor Float, Small Bowl
Carburetor Float, Small Bowl
- Small Bowl Carburetor Float for Marvel Schebler carbs (2 3/8 inches at widest point of outside edge of floats) used on 9N, 2N and 8N tractors AND used only on the following engines (year): 134 CID (1953 to 1954) or 172 CID (1955 to 1957) gas engines on tractors: NAA, 501, 601, 700, 701, 800, 801, 900, 901, 2000. (Part No: 9N9550A)
$9.41

Ford NAA Carburetor Gasket Set
Carburetor Gasket Set
- For tractor models 8N, 9N, NAA, Golden Jubilee, Jubilee, 600, 800, 2N, 620, 630, 640, 650, 660, 700, 740, 820, 840, 850, 860, 900, 950, 960, NAB with the following Marvel Schebler carburetors: TSX101, TSX126, TSX133, TSX137, TSX144, TSX151, TSX161, TSX171, TSX179, TSX197, TSX211, TSX241A, TSX241B, TSX241C, TSX246, TSX258, TSX290, TSX297, TSX301, TSX33, TSX341, TSX37, TSX38, TSX407, TSX420, TSX423, TSX44, TSX447, TSX453, TSX481, TSX55, TSX577, TSX580, TSX593, TSX69, TSX748, TSX76, TSX765, TSX771, TSX787, TSX79, TSX80, TSX818, TSX827, TSX83, TSX94, TSX976, TSXU829, TSXU832, TSX198, TSX241, TSX241A, TSX241B, TSX241C, TSX305, TSX319, TSX420, TSX428, TSX500, TSX551, TSX577, TSX580, TSX593, TSX692, TSX706, TSX771, TSX976, TSXU834 (Part No: 9N9502)
$2.28

Ford NAA Carburetor Gasket Set
Carburetor Gasket Set
- This gasket set is for all Models 1953-1957, using Marvel Schebler carburetor. Used on the following Marvel carbs: TSX692, TSX765, TSX976, TSX580, TSX500, TSX577, TSX241A, TSX241B, TSX241C, TSX420, TSX33, TSX771, TSX593, TSX706, TSX551 (Part No: EAF9502)
$4.13

Ford NAA Carburetor Kit, Basic
Carburetor Kit, Basic
- Basic Carburetor kit with Viton Needle and Seat. For tractor models 2000, 501, 600, 601, 700, 701, NAA, Jubilee. For Marvel-Schebler TSX428, TSX580, EAE9510C, EAE9510D. (Part No: BK47V)
$12.72

Ford NAA Carburetor Kit, Basic
Carburetor Kit, Basic
- Kit for Zenith 12493, 13879, 13800 and 13877 carb used on NAA, Jubilee, 800 series, 900 series tractors. (Part No: Z103)
$19.50

Ford NAA Carburetor Kit, Complete
Carburetor Kit, Complete
- For tractor models NAA, Jubilee 1953-64 with 134 CID gas engine, 600 and 700 1955-1957 with 134 CID gas engine, all with a Marvel-Schebler TSX428 or TSX580. Complete Carburetor Rebuild Kit. Rebuilds OEM Carb numbers: EAE9510C, EAE9510D, B2NN9510A, B4NN9510A. (Part No: C547V)
$36.21

Ford NAA Carburetor Kit, Comprehensive
Carburetor Kit, Comprehensive
- Comprehensive Carburetor Kit For Marvel-Schebler #s: TSX428, TSX500. Contains all the parts shown. For tractor models NAA, 600, 700 and Jubilee. (Part No: R7849)
$54.51

Ford NAA Carburetor, New
Carburetor, New
- This carburetor has a black finish, is a new aftermarket Carburetor and fits the NAA, Jubilee. Center-to-center on the mounting studs is 2.25 inches. ` Replaces TSX428, Zenith 13879 and Ford B2NN9510A. (Part No: EAE9510C-OE)
$443.24

Ford NAA Carburetor, New
Carburetor, New
- This new aftermarket Carburetor is for the NAA, Jubilee. Center-to-center on the mounting studs is 2.25 inches. Replaces TSX428, Zenith 13879 and Ford B2NN9510A. (Part No: EAE9510C)
$177.68

Ford NAA Carburetor, New
Carburetor, New
- With reversible linkage. This Zenith carburetor outperforms the original carbs used on: NAA, Golden Jubilee replaces TSX428. Center to center on the 2 mounting bolts is 2 1/4 inches. Made in USA, 1 year warranty. (Part No: 13879)
$336.72

Ford NAA Carburetor, Rebuilt
Carburetor, Rebuilt
- This rebuilt carburetor is a direct replacement for OEM numbers matching: TSX428. For the following tractor models: NAA, Jubilee. Center-to-center on the mounting bolts is 1 1/4 inches. Add $50.00 core charge to price (will be added after order is placed when ordering online) - you will receive instructions for returning your core for a refund if you have one available. (Part No: 1304-CARB)
$174.30

Ford NAA Choke Fly Assembly
Choke Fly Assembly
- Choke Fly Assembly 1-5/16 inch diameter. For 2N, 600, 700, 8N, 9N, NAA, Jubilee. (Part No: 9N9549)
$20.25

Ford NAA Choke Knob
Choke Knob
- For Ford Gas Tractors 1939-1964. Fits models: NAA, Jubilee, 2N, 8N, 9N, 501, 600, 601, 6411, 700, 701, 801, 900, 901, 2000, 4000. Replaces 9N9703, 9N9703B. (Part No: 9N9703)
$4.95

Ford NAA Choke Rod Assembly
Choke Rod Assembly
- This is the Carburetor Choke Control Rod Assembly for Ford tractors 1953-1964. Uses 9N9703 or 9828014 knob. Approximately 26-7/16 inches long. Not included. Replaces NAA9705B. (Part No: NAA9705)
$13.95

Ford NAA Cyclone Air Cleaner Glass Jar
Cyclone Air Cleaner Glass Jar
- For 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000, all 1939 to 1964. Cyclone Air Cleaner Glass Jar (jar only) screw on type. Exactly like original for tractors that used the "Cyclone" air cleaner only. (Part No: 230056)
$19.95

No
Picture
Cyclone Air Cleaner Glass Jar Seal
- Cyclone Air Cleaner Glass Pint Jar Seal (Part No: ACP1248)
$3.15

Ford NAA Cyclone Cup and Spring Assembly
Cyclone Cup and Spring Assembly
- Only for those tractors (1939 to 1964) that used the CYCLONE Air Cleaner Assembly which MAY include: 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Verify the type of air cleaner you have before ordering. (Part No: 230053)
$14.95

Ford NAA Fuel Cap, Non-Vented
Fuel Cap, Non-Vented
- This Silver Fuel Cap is for models 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 800, 820, 840, NAA Fuel Cap. Verify OEM number to ensure correct fit. (Part No: D5NN9030A)
$6.33

Ford NAA Fuel Cap, Vented
Fuel Cap, Vented
- 2-5/8 inch outside diameter, silver finish, 1-3/4 inch edge of tang to edge of tang, vented, includes gasket. For tractor models 8N, 9N, 2N, NAA, NAB, 501, 541, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2031, 2100, 2110. (Part No: C5NN9030D)
$9.75

Ford NAA Fuel Line
Fuel Line
- Metal Line with fittings, high quality steel fuel lines are coated inside and out with Algal (95% zinc & 5% aluminum). This will prevent oxidization and will keep your fuel clean. For tractor models NAA, Jubilee. (Part No: NCA9282C)
$33.00

Ford NAA Fuel Sediment Bowl Assembly
Fuel Sediment Bowl Assembly
- For models 8N, 9N, 2N, NAA and Jubilee with SHORT BOWL. The fuel bowl assembly has a 3/8 inch NPT male inlet and 1/4 inch female outlet, 1-1/4 inch long bowl. Works with 9N9282A fuel line. Replaces 2N99155B and NAA9155B with short bowl. (Part No: 2NAA9155B)
$12.18

Ford NAA Fuel Sediment Bowl Bail assembly
Fuel Sediment Bowl Bail assembly
- For tractors 8N, 9N, 2N, NAA, Jubilee. (Part No: 2N9166)
$2.28

Ford NAA Fuel Sediment Bowl Valve Stem
Fuel Sediment Bowl Valve Stem
- Sediment Bowl Valve Stem with wheel complete. For tractor models 8N, 9N, 2N, NAA. (Part No: APN9194)
$6.35

Ford NAA Fuel Sediment Glass Bowl
Fuel Sediment Glass Bowl
- 2 inch Glass Bowl. Fits NAA9155B and 2N9155B sediment bowls. Uses gasket NAA9160A, not included. Fits 8N, 9N, 2N, NAA, Jubilee. (Part No: 9N9162)
$2.42

Ford NAA Fuel Sediment Screen and Gasket
Fuel Sediment Screen and Gasket
- Gasket and Screen Set (for 2 inch outside diameter sediment bowl). Ford 8N, 9N, 2N, NAA, 600, 601, 700, 800, 801, 900. (Part No: 2NAA916061)
$1.71

Ford NAA Fuel Tank
Fuel Tank
- For Gasoline engines 11 gallon, no opening for sending unit. Tank has two threaded openings in bottom for fuel outlet, center and outer edge. It can be used for diesel if you install a diesel return line. Fits: NAA, Jubilee 1953-1954; 600, 601, 700, 701, 800, 801, 900, 901. (Part No: NAA600800G)
$199.78

Ford NAA Hand Throttle Control Lever Spring
Hand Throttle Control Lever Spring
- This Hand Throttle Control Lever Spring is used on Ford Tractors 1953-1964. It replaces original part number NAA9806B (Part No: NAA9806B)
$3.95

Ford NAA Main Adjusting Needle Spring
Main Adjusting Needle Spring
- Used with 9N9565C and EAE9565A main adjusting needles on Marvel Schebler Carburetors (Part No: 9N9540C)
$0.50

Ford NAA Needle Valve
Needle Valve
- Viton Float Valve Needle, Seat and Gasket Assembly. For tractor models (501, 601, 701, 600, 700, NAA, Jubilee, 2000, 800, 900, 801, 901, 4000. All with 134 or 172 CID gas engines from 1958-1964). (Part No: C3NN9D532A)
$5.12

Ford NAA Thottle Control to Bellcrank Rod
Thottle Control to Bellcrank Rod
- This Throttle Control to Bellcrank Rod is used on non-diesel fords, 1953 to 1964 and is 4 1/4 inches overall length. It replaces original part number NAA9815C. (Part No: NAA9815C)
$9.95

Ford NAA Throttle Bellcrank Friction Disc Spring Washer
Throttle Bellcrank Friction Disc Spring Washer
- 2-7/16 inch diameter, 7/16 inch center hole. For tractor models: NAA, NAB, Jubilee, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2000, 2030, 2111, 2120, 4000, 4030, 4040, 4121, 4130, 4140 (4 cylinder 1953 thru 1964). (Part No: NAA99778B)
$7.88

Ford NAA Throttle Control Rod
Throttle Control Rod
- 4-1/2 inch overall length, includes one Spring Steel Clip at each end of the rod. For tractor models NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1953 thru 1964 gas only. Replaces C0NN9A790A. (Part No: NAA9815F)
$23.61

Ford NAA Throttle Control to Governor Rod
Throttle Control to Governor Rod
- This throttle control to governor rod is used on Ford NAA / Jubilee tractors, 1953 - 1954. It replaces original part number NAA99817C, NAA-99817-C (Part No: NAA99817C)
$22.56

Ford NAA Throttle Rod Grommet
Throttle Rod Grommet
- This Throttle Rod Grommet is used on Ford Tractors 1953 to 1974. It Replaces original part numbers: 353873S, 83416731, 83935151. (Part No: 353873S)
$1.23

Gauges
Ford NAA Instrument Panel Light
Instrument Panel Light
- 12 Volt for tractor models NAA, Jubilee, 501, 600, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. Includes bulb, light fixture and wire leads. (Part No: S.66854)
$28.97

Ford NAA Instrument Panel Light Assembly
Instrument Panel Light Assembly
- This 6 volt dash light is for tractor models: NAA, NAB, 600, 700, 800, 900. Replaces 78-13466, C3NN14662A, NCA13771A. (Part No: 8NN14662A)
$28.95

Ford NAA Instrument and Gauge Kit 4 Speed
Instrument and Gauge Kit 4 Speed
- For NAA, Jubilee, 600, 700 with 4 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Part No: FDGAUGEKIT_4SP)
$102.45

Ford NAA Instrument and Gauge Kit 5 Speed
Instrument and Gauge Kit 5 Speed
- For NAA, Jubilee, 600, 700 with 5 speed transmission, 800, 900. ALL 1953 to 1957. Instrument and gauge kit contains: proofmeter, oil gauge 80 lb., ammeter 30 amp, temperature gauge and instrument lamp assembly 6 volt. (Part No: FDGAUGEKIT_5SP)
$99.66

Ford NAA Oil Pressure Gauge
Oil Pressure Gauge
- For tractor models: 8N, 9N, 2N, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 2000, 4000, NAA, Jubilee. All before 1964. Oil pressure gauge, 40 pounds, 2 inch body diameter. Replaces OEM numbers Ford: FAD9273A and Massey Ferguson: 506902M92. (Part No: S.61171)
$14.00

Ford NAA Oil Pressure Gauge, 80 Pound, Black
Oil Pressure Gauge, 80 Pound, Black
- For tractor models 8N, 9N, 2N, 541, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, (2000, 4000 4 cylinder), NAA, Jubilee, 1801. Black raised bezel, measures to 80 pound, dash or bracket mounted gauge with a bracket and studs 1/8 inch NPT thread. Replaces FAD9273A. (Part No: FAD9273A_Black)
$10.95

Ford NAA Oil Pressure Gauge, 80 pound
Oil Pressure Gauge, 80 pound
- For the following tractors (before 1965): 600, 601, 700, 701, 800, 801, 2000, 4000, NAA. Oil pressure gauge, 80 pound, 2 inch body diameter. (Part No: FAD9273A)
$10.95

Ford NAA Proofmeter Drive Adapter Shaft
Proofmeter Drive Adapter Shaft
- For tractor models 1953-1964: 2000 and 4000 4 cylinder, 501, 600, 700, 800, 801, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. VERIFY SIZE overall length of 1.672 inch and outside diameter of 0.435 inch. Fits both Vane and Piston Pumps. (Part No: EAF17375D)
$23.33

Ford NAA Proofmeter Drive Bolt
Proofmeter Drive Bolt
- This Drive Bolt fits the following models with Vane and Piston Type Hydraulic Pumps 1953 to 1964: Jubilee, NAA, NAB, 2000 4 cylinder, 4000 4 cylinder, 501, 600, 601, 700, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2111, 2120, 2130, 4030, 4040, 4121, 4130, 4140. Replaces: EAF951A. (Part No: EAF951A)
$15.81

Ford NAA Proofmeter Drive Bushing
Proofmeter Drive Bushing
- For tractor models 1953 to 1964: 2000 and 4000 4 cylinder, 501, 541, 600, 700, 800, 900, 1801, 2030, 2031, 2111, 2121, 2130, 3131, 4031, 4040, 4120, 4121, 4131, NAA, Jubilee. Verify size 1.275 overall length, 5/8 - 18 threads. Fits Vane and Piston Type Pumps. (Part No: EAF17381A)
$17.50

Ford NAA Tachometer (Proofmeter)
Tachometer (Proofmeter)
- For NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. All with 4-Cylinder Engines and 4-Speed Transmissions (1953-1964). Replaces C3NN17360N. (Part No: C3NN17360N)
$19.32

Ford NAA Tachometer Cable
Tachometer Cable
- Ford Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: B9NN17365B)
$14.43

Ford NAA Tachometer Cable, Steel
Tachometer Cable, Steel
- Ford Steel Jacketed Proof Meter/Tach cable 30 1/2 inches long. Fits the following tractors (before 1965): NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: B9NN17365BSTEEL)
$16.50

Ford NAA Temperature Gauge, Black Rim
Temperature Gauge, Black Rim
- For NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch diameter, 34 inch capillary tube length. Replaces FAD10883A. (Part No: C3NN18287A-Blac)
$15.23

Ford NAA Temperature Gauge, Chrome Rim
Temperature Gauge, Chrome Rim
- For tractor models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. All 4-Cylinder before 1964 (except Majors). Temperature Gauge, 2 inch face diameter. Replaces FAD10883A, and C3NN18287A. (Part No: C3NN18287A-Chro)
$33.21

Hitch / Drawbar
Ford NAA Chain
Chain
- CHAIN, Fixed Drawbar Safety Chain Assembly, EXACT reproduction of ORIGINAL Drawbar Chain. FOR tractors: 8N, 9N, 2N, Jubilee, NAA (1939-1954). (Part No: 9N5370)
$49.95

Ford NAA Crank Arm, Leveling Box
Crank Arm, Leveling Box
- This Leveling Box Crank Arm is for tractor models NAA, Jubilee, 2N, 8N, 9N, 340, 420, 600, 700, 800, 900, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4000, 4110, 4600. (Part No: C5NN594E)
$8.10

Ford NAA Drawbar Link Check Chain Anchor
Drawbar Link Check Chain Anchor
- Anchor, Drawbar Link Check Chain (pair- one right and one left). For Dexta, NAA, Super Dexta, Jubilee, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610. (Part No: 957E5967)
$15.33

Ford NAA Eyelet Assembly, Check Chain
Eyelet Assembly, Check Chain
- This Check Chain Eyelet Assembly fits Many Ford Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces EC0N660A, NCB660A (Part No: EC0N660A)
$5.51

Ford NAA Hitch Ball 10000LB 2-5\16
Hitch Ball 10000LB 2-5/16
- 2-5/16 inch ball size, 1-1/4 inch stud thread, 2-1/2 inch stud length, 10000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516114)
$23.85

Ford NAA Hitch Ball 15000LB 2-5\16
Hitch Ball 15000LB 2-5/16
- 2-5/16 inch ball size, 1-3/8 inch stud thread, 2-5/8 inch stud length, 15, 000 LB max load capacity, three chrome hitch ball class. (Part No: CHB2516138_)
$25.04

Ford NAA Hitch Ball 2000LB
Hitch Ball 2000LB
- 1-7/8 ball size, 3/4 stud thread, 1-3/4 stud length, 2000 LB max load capacity, ONE CHROME hitch ball class. (Part No: CHB17834)
$13.37

Ford NAA Hitch Ball 3500LB
Hitch Ball 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Ford NAA Hitch Ball 5000LB
Hitch Ball 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Ford NAA Hitch Ball 5000LB 2-5\16
Hitch Ball 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Ford NAA Level Box Fork - Right
Level Box Fork - Right
- Fork, Hydraulic Lift Leveling Rod, right hand. Length 10-1/4 inches. For 8N, 9N, 2N, Jubilee, NAA. (Part No: 9N585A)
$29.81

Ford NAA Level Box Handle
Level Box Handle
- Lever Handle. For Jubilee, NAA, 2N, 8N, 9N, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. (Part No: 9N594)
$8.19

Ford NAA Leveling Box Assembly, Right
Leveling Box Assembly, Right
- This Right Hand Leveling Box Assembly uses 5/8 inch pins and opens center-to-center from 17.75 to 21.5 inches. Adjusts 21.5 inches. Width of the fork is 9/16. For 8N, 9N, 2N, NAA, Jubilee. (Part No: 8N577A)
$70.32

Ford NAA Leveling Box Gear
Leveling Box Gear
- Gear, Leveling Box Pinion. For 2000, 2N, 3000, 4000, 501, 600, 700, 800, 8N, 900, 9N, Jubilee, NAA. (Part No: B9NN568A)
$9.11

Ford NAA Leveling Box Knuckle Pin
Leveling Box Knuckle Pin
- MUST ORDER IN QUANTITY 2, PRICED EACH. For tractor models NAA, 600, 601, 700, 701, 800, 801, 801, 701, 801, 900, 901, 8N, 9N, 2N all built 1939 to 1964, (2000, 3000, 4000 1965 and up), (3600, 4600 1975 and up). 5/8 inch pin diameter, 2 7/8 inch usable length. Takes our 3/16 inch linchpin (part number DKP316). MUST ORDER IN QUANTITY OF 2, PRICED EACH. (Part No: 9N595)
$1.88

Ford NAA Leveling Box Knuckle, Right
Leveling Box Knuckle, Right
- Knuckle, Right Hand Leveling Assembly. Pin holes are 5/8 of an inch. The shape of the one pictured may vary slightly from different manufacturers. For tractor models NAA, Jubilee, 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600. Uses 2 pins part number 9N595. (Part No: 957E566)
$9.20

Ford NAA Leveling Box Shaft
Leveling Box Shaft
- This Leveling Box Shaft and Gear measures 14 inches long with thread length of 4 inches. Diameter is 3/4 inches. For Jubilee, NAA, Dexta, Super Dexta, 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000. (Part No: NCA579B)
$18.09

Ford NAA Leveling Box Yoke Rod, LH
Leveling Box Yoke Rod, LH
- Left hand side. Rod diameter is .750 inches. For tractor models NAA, Jubilee, 2N, 8N, 9N, 30, 340, 420, 600, 620, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 2100, 2600, 2610, 3000, 3100, 3400, 3550, 3600, 3610, 4110. (Part No: C5NNB863A)
$28.90

Ford NAA Leveling Rod, Left Hand
Leveling Rod, Left Hand
- Lift Link, left hand, non-adjustable. Hole centers approximately 20 inches. Replaces 9N564B, C5NN564B. (Part No: 182544M92)
$44.48

No
Picture
Lift Arm - 32 Inch - Cat 1
- Lower Lift Arm, heavy-duty, with forged ball-joint ends. Category I accommodates 7/8 inch drawbar or lower link pins. Painted blue. Length 32 inches. For tractor models 8N, 9N, 2N, Golden Jubilee and NAA. (Part No: JSA1002B)
$46.17

Ford NAA Lower Lift Arm Pin Nut
Lower Lift Arm Pin Nut
- Used on Category I lower lift arms, where the arm attaches to the axle housing, this nut is 5/8 UNF thread. Verify size before ordering. Many models have different size nuts. Replaces OEM numbers 83904384, 86637930, 87446, 33987S, 33987S36, 81419279, 701647, 353927X1, 170917423, 70917423, 6217938M1 (Part No: 353927X1)
$0.92

Ford NAA Lower Link Support Pin, 5 1\8 Inches
Lower Link Support Pin, 5 1/8 Inches
- This Lower Link Support Pin measures 5 1/8 inches long. It is for tractors less Differential Lock for models 2000, 3000, 3600, 4000, 4600, 600, 601, 700, 701, 800, 801, 8N, 900, 901, NAA. Replaces NCA563C, 81801640, 87712982 (Part No: NCA563C)
$16.31

Ford NAA Pin Clip Kit
Pin Clip Kit
- Kit, Pin (C5NN807D) and Spring Clip (311920). Tractors 2000, 3000, 4000 (1965 and up). Also services earlier models (1953 to 1964) using swinging drawbar: NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. This pin is 7/8 inch in diameter and 2-3/4 inches long. Replaces 311920, C5NN807D, CBPN804A, E4NN807AA, 83948134. (Part No: CBPN804A)
$4.65

Ford NAA Pin, Hydraulic Lift Yoke
Pin, Hydraulic Lift Yoke
- Hydraulic Lift Yoke Pin measures 1 inch diameter and 3 1/4 inches in length. For tractor models 8N, NAA, Jubilee, (1950-1954). (Part No: 8N486B)
$14.00

Ford NAA Stabilizer Arm
Stabilizer Arm
- Stabilizer arm measures length 31-1/2 inches center to center. For tractor models 2N, 600, 800, 8N, 9N, Jubilee, NAA, 2000 (4 cylinder), some 4000 (4 cylinder). Color of part can be red or primer depending on supply. (Part No: 230042R)
$21.34

Ford NAA Stabilizer Bracket
Stabilizer Bracket
- Used on the left or right side, this bracket has mounting bolt hole spacing of 5 inches on center. It is 6.75 inches long and 0.375 inches thick. This part replaces 231254, C5NNN928D, 181775M1, 181775M91, 181776M91. Color varies. This part may arrive Red, Blue, or Black. (Part No: 231254)
$15.65

Ford NAA Stabilizer Kit, Extra Heavy Duty
Stabilizer Kit, Extra Heavy Duty
- Universal Stabilizer Kit For 8N, 9N, 2N, NAA, Jubilee, 600, 800. Contains (2) stabilizer bars, universal brackets with pins & hardware. 31.5 inches center to center. Additional $15 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 231253XHD)
$71.58

Ford NAA Stabilizer Pin with nut and lockwasher
Stabilizer Pin with nut and lockwasher
- Category I.Length 2.625 inches, pin diameter 0.875 inches, thread 0.625 inches-18. Replaces original part numbers C5NNA889A, 81813825, 81822760, 81823752. (Part No: SBP75-WNL)
$2.06

Ford NAA Stay Strap, Lower Red
Stay Strap, Lower Red
- For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Lower. (Part No: 9N5375)
$9.21

Ford NAA Stay Strap, Upper Blue
Stay Strap, Upper Blue
- Painted blue, 25.500 inches long, .250 inches thick, 1.500 inches wide, .937 inch hole, .613 inch x 6.625 inch slot. For tractor models 600, 700, 800, 8N, 900, 9N, NAA. (Part No: 9N5374B)
$11.21

Ford NAA Stay Strap, Upper Red
Stay Strap, Upper Red
- For 8N, 9N, 2N, NAA, 600, 700, 800, 900. Stay Strap - Upper. (Part No: 9N5374)
$10.92

Ford NAA Swinging Drawbar
Swinging Drawbar
- For 600, 840, 841, 851, 860, 8N, NAA, Jubilee. Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. Holes on the hitch side are 5/8 inches diameter and located 1-1/2 and 4-3/8 inches on center from end. Holes on the tractor side are 0.950 inches and are locates 1-5/8, 3-5/8 and 7-5/8 inches on center from the end. Used in 49A34R & 49A35. Replaces C0NN805F (Part No: C0NN805F)
$53.77

Ford NAA Swinging Drawbar Clevis Assembly
Swinging Drawbar Clevis Assembly
- Clevis Assembly with Pins for SDA6 or SDA8 kits. For tractor models 8N, NAA, NAB, 600, 601, 800, 801, 1801, 2000 4 cylinder, 4000 4 cylinder. (Part No: NCA803B)
$11.40

Ford NAA Swinging Drawbar Clevis Pin
Swinging Drawbar Clevis Pin
- This Swinging Draw bar Clevis Pin is the original style and will only work with original style drawbar hangers. Measures 1 1/8 inch diameter and 2 1/2 inches in length without head. Used on Ford Tractors, 1948-1956 (Part No: 8N804)
$11.95

Ford NAA Swinging Drawbar Hanger
Swinging Drawbar Hanger
- Drawbar Hanger. For 600, 8N, NAA. (Part No: NCA809A)
$43.53

Ford NAA Swinging Drawbar Kit
Swinging Drawbar Kit
- This Drawbar assembly is for NAA, 600, 8N. Swinging drawbar kit. Contains Drawbar: 29.375 inches long, 2.00 inches wide, 1.00 inch thick. Rear drawbar hanger, drawbar clevis assembly and drawbar clevis pin. May come painted red, black or primer. (Part No: 49A34R)
$112.54

Ford NAA Thrust Bearing
Thrust Bearing
- Leveling Box Assembly Bearing. For 2N, 8N, 9N, 501, 600, 700, 800, 900, 2000, 3000, 3600, 4000, 4600, Dexta, Super Dexta, Jubilee, NAA. (Part No: 9N554)
$22.80

Ford NAA Top Link Rocker
Top Link Rocker
- For 8N, 9N, 2N, NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 800 Hi-clearance, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 2000 4 cylinder Hi-clearance, 4000 4 cylinder Hi-clearance. (Part No: NCA535A)
$63.05

Hydraulic System
Ford NAA Coupler Hub, Hydraulic Pump
Coupler Hub, Hydraulic Pump
- For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7/16 inches in diameter, smooth type, 2-3/4 inch spacing. 1-3/8 inch relief diameter, 9/16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Part No: 290421)
$70.81

Ford NAA Draft Control Plunger
Draft Control Plunger
- For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Part No: 8N541B)
$37.08

Ford NAA Draft Control Plunger Spring
Draft Control Plunger Spring
- This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Part No: 9N547B)
$22.95

Ford NAA Draft Control Spring Plate
Draft Control Spring Plate
- This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Part No: 9N527)
$10.50

Ford NAA Draft Control Spring Plate, with Pin
Draft Control Spring Plate, with Pin
- This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Part No: 8N527)
$14.50

Ford NAA Draft Control Spring Seat
Draft Control Spring Seat
- Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Part No: 2N624)
$6.50

Ford NAA Felt, Spring Seat
Felt, Spring Seat
- Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Part No: 9N529)
$3.95

Ford NAA Friction Disk for Hydraulic Control Lever
Friction Disk for Hydraulic Control Lever
- Friction Disk for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Part No: C5NN518B)
$1.46

Ford NAA Gasket, Hydraulic Pump Drain
Gasket, Hydraulic Pump Drain
- Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Part No: 8N7011)
$1.38

Ford NAA Hydraulic Lift Control Quadrant
Hydraulic Lift Control Quadrant
- For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disk C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Part No: 9N515)
$22.43

Ford NAA Hydraulic Lift Cover Repair Kit
Hydraulic Lift Cover Repair Kit
- For NAA 1953-54, Jubilee. Lift Cover Repair Gasket Kit. The kit contains (2) NAA552A gaskets, (1) NAA553B gasket, (1) NAA473A backup washer, (1) NAA502A gasket, (1) NAA533A piston O-ring, (1) 44R011 O-ring, (1) 44R112 O-ring, (1) 44R113 O-ring, (1) 44R114 O-ring. (Part No: LCRK5354)
$8.52

Ford NAA Hydraulic Lift Level Indicator (Dip Stick)
Hydraulic Lift Level Indicator (Dip Stick)
- 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Part No: NAA927C)
$4.70

Ford NAA Hydraulic Lift Lever
Hydraulic Lift Lever
- For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Part No: S.66598)
$20.63

Ford NAA Hydraulic Lift Piston Connecting Rod
Hydraulic Lift Piston Connecting Rod
- For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Part No: 86563314)
$19.89

Ford NAA Hydraulic Lift Ram Arm
Hydraulic Lift Ram Arm
- For NAA, Jubilee. (Part No: NAA545A)
$106.43

Ford NAA Hydraulic Lift Shaft
Hydraulic Lift Shaft
- For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Part No: NCA544B)
$400.55

Ford NAA Hydraulic Lift Shaft Arm
Hydraulic Lift Shaft Arm
- For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Part No: 9N543B)
$65.30

Ford NAA Hydraulic Lift Shaft Bushing
Hydraulic Lift Shaft Bushing
- This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3/8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Part No: 9N531C)
$31.88

Ford NAA Hydraulic Line Set
Hydraulic Line Set
- This manifold fits tractors with piston type pump (round body) for tractor models: Jubilee, NAA. (Part No: NAA876A)
$295.00

Ford NAA Hydraulic Pump Drive Shaft
Hydraulic Pump Drive Shaft
- Hydraulic pump shaft. 3/4 inch diameter, 9-1/4 inch overall length. End A type: key, 3/4 inch size, End B type: 6 spline, 3/4 inch size. Associated components end A flex. coupler: L601-14 (3/4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Part No: 194355)
$26.57

Ford NAA Hydraulic Pump Drive Shaft
Hydraulic Pump Drive Shaft
- Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Part No: 195454)
$37.79

Ford NAA Hydraulic Pump Gasket Kit
Hydraulic Pump Gasket Kit
- Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: FPN910B)
$14.33

Ford NAA Hydraulic Pump Gear
Hydraulic Pump Gear
- Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, NAA. (Part No: C3NN908A)
$39.81

Ford NAA Hydraulic Pump Hub
Hydraulic Pump Hub
- Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7/8 inch outside diameter, 2 3/4 inches center to center on holes. 6 spline center bore, 3/4 inch inside diameter. (Part No: 54C2055)
$41.33

Ford NAA Hydraulic Pump Mounting Gasket
Hydraulic Pump Mounting Gasket
- On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vain type hydraulic pumps to the engine. (Part No: EAF911B)
$2.00

Ford NAA Hydraulic Pump Needle Bearing
Hydraulic Pump Needle Bearing
- Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Part No: NCA881A)
$9.89

Ford NAA Hydraulic Pump Plate
Hydraulic Pump Plate
- Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Part No: C0NN852A)
$31.40

Ford NAA Hydraulic Pump Pressure Plate
Hydraulic Pump Pressure Plate
- This hydraulic pump pressure plate is for Vane style pumps. It has a Manganese phosphate coating is 2.440 inches across and 0.797 inches tall. It is used on all 1954 to 1955, up to serial number 66849 using 3/4 inch wide vane style pumps. Replace original part number NCA969B. (Part No: NCA969B)
$89.36

Ford NAA Hydraulic Pump Repair Kit
Hydraulic Pump Repair Kit
- Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Part No: CCPN600AB)
$43.95

Ford NAA Hydraulic Pump Shaft
Hydraulic Pump Shaft
- Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Part No: NCA966E)
$57.56

Ford NAA Hydraulic Pump Shaft Bearing Cone
Hydraulic Pump Shaft Bearing Cone
- Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: D5NN1201A)
$4.44

Ford NAA Hydraulic Pump Shaft Bearing Cup
Hydraulic Pump Shaft Bearing Cup
- Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Part No: D5NN1202A)
$2.30

No
Picture
Hydraulic Pump Shaft Oil Seal
- For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: NCA851A)
$5.01

Ford NAA Hydraulic Pump Wobble Shaft Thrust Plate
Hydraulic Pump Wobble Shaft Thrust Plate
- This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Part No: C0NN858A)
$66.93

Ford NAA Hydraulic Spring Seat
Hydraulic Spring Seat
- For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). (Part No: 9N525B)
$9.95

Ford NAA Hydraulic Wobble Shaft Plate
Hydraulic Wobble Shaft Plate
- For tractor models 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Part No: NCA859A)
$44.30

Ford NAA Lift Cover Gasket
Lift Cover Gasket
- This Lift Cover Gasket is used on Ford 9N, 2N, 8N, NAA and Jubilee Tractors. Replaces NAA502A (Part No: NAA502A)
$2.13

Ford NAA Lift Piston
Lift Piston
- This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models NAA, NAB, 8N, 9N, 2N, Jubilee. (Part No: NAA530B)
$21.17

Ford NAA Lock Washer, Assembly
Lock Washer, Assembly
- Lock Washer Assembly for hydraulic lift shaft to arm. For tractor models 9N, 8N, NAA (1939-1954). (Part No: 9N550)
$6.89

Ford NAA Plate Hydraulic lift Control
Plate Hydraulic lift Control
- Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disk C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Part No: 9N515)
$23.10

Ford NAA Quadrant Stop Kit
Quadrant Stop Kit
- For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Part No: 9N521)
$7.41

Ford NAA Vane Type Hydraulic Pump Kit
Vane Type Hydraulic Pump Kit
- For 5/8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Part No: CPN972B)
$393.30

Ford NAA Vane Type Hydraulic Pump Kit
Vane Type Hydraulic Pump Kit
- For 3/4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B (Part No: CPN972C)
$380.00

Implements
Ford NAA Caster Assembly, Old Style
Caster Assembly, Old Style
- Tail Wheel and Hub Assembly with grease fitting. 4 x 8 inch rim, 15 inch outside diameter of wheel. Includes wheel, hub, axle bearing and bolt assembly. OLD style tail assembly used on the following Bush Hog cutters: 12, 104, 105, 109, 126, 205, 255, 275, 285, 305, 306, 307, 405, 405HR, 406, 406HR, 502, 600, 1050, 1051, 1109, 1126, 1207, 1209, 1226, 1306, 1307, 1405, 1406, 510, 2512, 3108, 2309, BD90, FH162, S268, SM60, SQ36, SQ480, SQ600. Wheel must be attached to fork. For Bush Hog cutters. With SPB40 spacer, assembly will also replace all models with Timken Bearings (Ref #1-#11). (Part No: BH215)
$106.08

Ford NAA Hub Assembly
Hub Assembly
- Hub with bushings (3/4 inch), wheel bolts (4), and grease fitting. Center tube length 5 inches. For rotary cutters: RB60 with new style 1-1/4 inch diameter caster, SM60R, SM160R; Squealer models: 1207, SQ36, SQ48, SQ60, SQ72, SQ148, SQ480. Replaces 60978, 60990, 63812. Can use 500BH tail wheel. (Part No: 63813BH)
$28.38

Ford NAA Tail Wheel Assembly
Tail Wheel Assembly
- 6 inch x 9 inch tail wheel assembly with laminated tire, less hub. 4 inch pilot, 5 bolt holes, 5-1/2 inch bolt circle. 5-1/4 inches wide, 21 inch outside diameter, 74#. Used mostly on pull Bush Hog models of the following series mowers: 109, 115, 126, 160, 166, 205, 206, 207, 220, 255, 256, 257, 268, 305, 306, 307, 310, 315, 405, 406, 502, 600, 1109, 1115, 1126, 1206, 1207, 1209, 1220, 1226, 1257, 1305, 1306, 1307, 1310, 1315, 1405, 1406, 1600, 2315, 2415, 2510, 2512, 2610, 2614, 2615, 3108, 3209, 3368, 3414, 3610, 4214, 4215, 12610, 12615, 13710, CR14R, CR20F. (Part No: 294)
$124.93

Lights
Ford NAA Bracket
Bracket
- Headlight bracket reinforcement, clear zinc plated for ROUND headlight bracket. For tractors: 8N, NAA {1949-1954}. (Part No: 8N13102)
$4.95

Ford NAA Bulb Retainer, Pack of 3
Bulb Retainer, Pack of 3
- Clips, worklight bulb to rim retainer. Set of 3 {special clip to hold bulb assembly in rim}. For tractors: 8N, NAA {1949-1954}. (Part No: 8N15534)
$5.95

Ford NAA Clip
Clip
- Lamp Wire Clip {rear lamp wire to brake actuating shaft} 2 required. For tractors: 8N, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N14565)
$7.50

Ford NAA Halogen Work Light-Double Bulb
Halogen Work Light-Double Bulb
- 12 volt lamp assembly, flood pattern, double bulb 55 watt halogen. Includes replaceable 55 watt halogen bulb. (Part No: L982-12V)
$51.42

Ford NAA Headlight Bracket
Headlight Bracket
- This round Headlight Bracket will replace the right or left side for models 8N, NAA, Jubilee {1949-1954}. (Part No: 8N13472)
$7.49

Ford NAA Headlight Bracket, Winged Left
Headlight Bracket, Winged Left
- Winged Headlight Bracket for left side. For tractor models 8N, 9N, 2N, NAA. (Part No: 9N13473)
$17.50

Ford NAA Headlight Bracket, Winged, Right
Headlight Bracket, Winged, Right
- Headlight Winged Bracket for the right side. For tractor models 8N, 9N, 2N, NAA. (Part No: 9N13472)
$17.50

Ford NAA Headlight Set - 6 Volt
Headlight Set - 6 Volt
- This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. Replacement sealed beam bulbs available as p/n L4019. (Part No: 2N13005-6V)
$129.95

Ford NAA Headlight Set, 12 Volt
Headlight Set, 12 Volt
- This Headlight is exactly like the factory original with TRACT-O-LITE stamped into housing for tractor models 1939-1954. Will also fit models through 1964 but are not the same diameter as originals. For tractor models 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000, 8N, 9N, 2N, NAA 1939-1964. This is a pair of headlight assemblies complete with sealed beam bulb. (Part No: 2N13005-12V)
$129.95

Ford NAA Knob, Light Switch
Knob, Light Switch
- Aluminum. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 4000. (Part No: 9N9703)
$4.95

Ford NAA Light Assembly, Worklight 6 Volt
Light Assembly, Worklight 6 Volt
- This original style Worklight Assembly with on/off switch only comes in 6 volt. Includes fender bracket spacer. For tractors: 8N, NAA, Jubilee {1951-1954}. (Part No: 8N15500L)
$106.56

Ford NAA Light Rim
Light Rim
- Headlight Door Assembly {rim}. For tractors with TRACT-O-LIGHT stamped lights only. For tractors: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900 {1939-1956}. This rim is 3/4 inch in width. (Part No: 2N13043)
$10.53

Ford NAA Light Rim
Light Rim
- Rim, worklight bulb retainer, outside diameter 5-1/4 inches, inside diameter 4 inches. For tractor models 8N, NAA, {1949-1954}. (Part No: 8N15513)
$23.46

Ford NAA Light Switch
Light Switch
- For tractor models 8N, 9N, 2N, NAA, Jubilee. Light Switch with fuse. (Part No: 8N11654B)
$9.62

Ford NAA Magnetic worklight Universal Mounting.
Magnetic worklight Universal Mounting.
- Can be placed anywhere there is a metal surface. 3-1/2 inch x 6 inch weather resistant steel body (black), glass lens, flood pattern, 140 foot beam. Halogen bulb, 12 volt, 55 watt, replaceable. 12 foot cord with cigarette lighter plug. (Part No: L100MAG)
$43.12

Ford NAA Portable Halogen Work Lamp
Portable Halogen Work Lamp
- 3 inch x 5 inch sealed beam unit, 12 volt, 50 watt, 4 amp. With handle and magnetic base. Projects flood beam pattern 50 foot wide x 30 foot long. Lamp is not legal for street use. (Part No: L200MAGH)
$75.13

Ford NAA Sealed Beam Bulb 12V
Sealed Beam Bulb 12V
- Sealed beam bulb, 12 volt, 5-3/4 inch diameter, 35 watt, Sealed Beam. Trade number 4419. Replaces: 310062, 230252, 2084379, 70230252, T20958, TO17074, 371443R91, 002803M91, 1038428M91, 1751347M91, 1754916M91, 102213A, 30-2020521 (Part No: 70230252)
$15.95

Ford NAA Sealed Beam Bulb, 6 Inch
Sealed Beam Bulb, 6 Inch
- The Sealed Beam Bulb is 6 Volt, 5.625 inches in diameter and has two contacts. Fits models: NAA, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. It replaces Ford part number 310061. (Part No: 1002802M91)
$13.25

Ford NAA Switch, Light
Switch, Light
- Switch, Worklight. For tractor models 8N, NAA (1949-1954). (Part No: 8N13740)
$12.50

Ford NAA Tail Light \ Dash Light Bulb - 12-Volt
Tail Light / Dash Light Bulb - 12-Volt
- This 12 Volt Bulb is a Single contact with a Bayonet base. It is 0.59 amps. The base diameter is 0.595 inches. It is used in many tail lights and dash lights. May be used when changing from 6 - 12 Volts. (Part No: TLBULB12V)
$1.14

Ford NAA Tail Light Assembly, 6 Volt
Tail Light Assembly, 6 Volt
- Light assembly has FOMOCO lens (plastic). For 6 volt tractors made between 1953 to 1954 including NAA & Jubilee, also fits the following models: (Caution; may not fit later models of these tractors): 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960. (Part No: FAA13402A)
$39.25

Ford NAA Tail Light Wire Clip
Tail Light Wire Clip
- For 8N, 9N, 2N, NAA and Jubilee to 1954. Rear lamp wire clip. 6 required per tractor. (Part No: 9N17668)
$1.95

Ford NAA Tail Lite, License Light, Clear Glass Lens
Tail Lite, License Light, Clear Glass Lens
- This Tail Lite is used with 'Taurus' style tail lights, originally used 1939-1947. It may be found on later tractors if a Taurus lamp was used. Uses Gasket FAA13447A, not included. (Part No: 9N13445)
$9.95

Ford NAA Tail Lite, License Light, Lens Gasket
Tail Lite, License Light, Lens Gasket
- For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881 all 1939-1953. Replaces 40-13460, FAA13447A (Part No: FAA13447A)
$2.95

Ford NAA Taillight Mounting Bracket
Taillight Mounting Bracket
- Exact of original. Manufactured in USA. (goes between tail light and fender bracket, mounting on top of 9N13470 or 9N13471.) For DUOLAMP tractors 8N, 9N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4-cylinder), 1801 series (1949 to 1954). (Part No: 8N13423)
$9.95

Ford NAA Work Light Assembly - 12 Volt
Work Light Assembly - 12 Volt
- Worklight assembly, 12-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Part No: 8N15500-12V)
$74.95

Ford NAA Work Light Assembly - 12 Volt Econ
Work Light Assembly - 12 Volt Econ
- This is an economy version of 8N15500-12V Worklight assembly. It is 12-volt sealed beam with on/off switch. It is close to original, but not exact. Includes 8N15532 fender bracket spacer. (Part No: 8N1550012VECON)
$42.58

Ford NAA Work Light Assembly - 6 Volt
Work Light Assembly - 6 Volt
- Worklight assembly, 6-volt sealed beam with on/off switch. Includes 8N15532 fender bracket spacer. Like OEM quality except for the lens. For tractors: 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 {1947 to 1964}. (Part No: 8N15500-6V)
$74.95

Ford NAA Work Light Bulb, 6V
Work Light Bulb, 6V
- This is a 6 volt, 4 1/2" sealed beam bulb with dimpled lens. It replaces original part number 8N15514 (Part No: 8N15514)
$22.43

Ford NAA Worklight Bulb, 6 Volt
Worklight Bulb, 6 Volt
- Worklight bulb assembly, FROSTED lens with rings. M.F.G. in U.S.A. For tractors: Late 8N, NAA, {1951-1954}. (Part No: 8N15514L)
$59.96

Ford NAA Worklight Mounting Socket
Worklight Mounting Socket
- Fender bracket round spacer, worklight to fender bracket {included with work-light assemblies}. For Ford tractors: thru 1958 (Part No: 8N15532)
$9.95

Oil System
Ford NAA Dipstick, Engine Oil
Dipstick, Engine Oil
- Engine Oil Level Indicator measures about 14 3/4 inches overall length for 4 Cylinder Gas and Diesel, pre 1965. For tractor models 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Part No: C0NN6750B)
$6.95

Ford NAA Filter Breather
Filter Breather
- Rocker Arm Cover Vent Element. Tractors: NAA, Jubilee, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 950, 960, 2000, 4000. (Part No: EAF6866A)
$5.55

Ford NAA Gasket, Oil Pan Drain Plug
Gasket, Oil Pan Drain Plug
- Fits Ford Tractors 1939 to 1964, Models: NAA, NAB, Jubilee, 2N, 8N, 9N, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000, 4000. This gasket measures 2.632 inches inside diameter, 3.085 inches outside diameter, .250 inches wide and it is .059 inches thick. Replaces 8N6734. (Part No: 8N6734)
$1.75

Ford NAA Oil Filler Breather Element
Oil Filler Breather Element
- Fits caps 310030 and 8N6766B. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. (Part No: 8N6782A)
$4.40

Ford NAA Oil Filler Cap with Element
Oil Filler Cap with Element
- Oil filler cap measures 3 1/2 inches diameter. Insert is 1 1/4 inches outside diameter. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 2030, 2031, 2111, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140. This is an original style with element. Overall length is 3 5/8 inches, 1 1/2 inch diameter tube and tube is 1 3/8 inches long. Also replaces OEM 8N6766B. (Part No: 310030)
$8.79

Ford NAA Oil Filter
Oil Filter
- Cartridge Type. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 thru 1965, 1800, 223, 240, 289, 300, 320, 332, 352, 391. Comes with gasket. Measures 4 3/4 inches long, 4 inch diameter with 3/4 inch diameter holes in each end. (Part No: CPN6731B)
$6.65

Ford NAA Oil Filter Adapter Kit, Spin On
Oil Filter Adapter Kit, Spin On
- Converts tractor from element style filter to spin on oil filter. Comes with one filter. For tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 740, 750, 701, 741, 771, 800, 820, 840, 801, 811, 821, 841, 851, 861, 871, 881, 900, 950, 960, 901, 941, 951, 961, 971, 981, 2000, 4000 all from 1953 to 1964 with 4 cylinder gas engine. Can use replacement spin-on filter E7NN6714AA. Replaces ECG6890A, EAA6838A, 87644685, CPN6882A (Part No: CPN6882A)
$33.63

Ford NAA Oil Filter Mounting Gasket
Oil Filter Mounting Gasket
- This gasket fits behind the Mounting Plate that the filter screws on to. For Spin On Type Oil Filters only. For tractor models 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. (Part No: EAA6838A)
$1.23

Ford NAA Oil Filter, Spin-On
Oil Filter, Spin-On
- Spin on style oil filter measures with dimensions of 5 13/32 inches in length, 3 11/16 inches O.D. Fits Tractor Models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610, 5000, 5600, 5610, 6600, 6610 from 1965 to 10/1969. For use with spin on filter adapter 309825.(40538S)Replaces 237000, 4511629, 70237000, 74511629, C9NN6714A, 1959757C1, 388227R1, 918266R93, 920203C1, A146696, A17415, A33487, A37189, E36534, G45210, G45306, 500462, 86546614, 86546614DS, C1AZ6731A, C3AE6714A, C5NE6737B, D9NN6714EA, E7NN6714A, E7NN6714AA, 1851658, TY9425, TY9425E, 159045A, 83963907, 87800083, 83947505, 89832924. Please verify OEM number before ordering. (Part No: E7NN6714AA)
$5.78

Ford NAA Oil Pan Plug Kit
Oil Pan Plug Kit
- Gasket, Oil Pan Plug and Screen Assembly. For all gas models 1939-1964. Fits 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: 9N6730WG)
$12.75

Ford NAA Oil Pump Cover Gasket
Oil Pump Cover Gasket
- Used on Ford 4 cylinder tractors, 1952-1964 with gear type oil pumps. (Part No: EAA6619C)
$1.56

Ford NAA Oil Pump Drive Shaft, Hex
Oil Pump Drive Shaft, Hex
- This Hex Shaped Oil Pump Drive Shaft is used in 4 Cylinder Fords, 1954-1964. May also be in a 1952-1953 (Part No: EAF66646D)
$18.00