FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ford NAA (Golden Jubilee) Parts

Category: Hydraulic System

[Categories] [All NAA Parts] [All Ford Models]

Coupler Hub, Hydraulic Pump - For use with Loader-Backhoe Hydraulic Pumps. Hub is 4 inches overall diameter, 4 mounting holes at 7/16 inches in diameter, smooth type, 2-3/4 inch spacing. 1-3/8 inch relief diameter, 9/16 inch depth, 10 spline, 1 inch center bore. Normally used with shaft part number 195454 and can be used with shaft 197118. For tractor models 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 741, 750, 701, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. (Item #: 112100, Ref: 290421) $42.30

Draft Control Plunger - For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta. Fine Thread style. (Item #: 111890, Ref: 8N541B) $38.30

Draft Control Plunger Spring - This Draft Control Plunger Spring fits between the Hydraulic Plunger and Yoke. Fits 9N, 2N 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except row crop), Dexta, Super Dexta. (Item #: 165989, Ref: 9N547B) $35.30

Draft Control Spring Plate - This Draft Control Spring Plate is used on Ford tractors from 1939 to 1964. It replaces: 81801555, 957E527, 9N527, NCA527A. I you need the plate with the pin, order 8N527. (Item #: 178070, Ref: 9N527) $16.00

Draft Control Spring Plate, with Pin - This plate has the pin. For tractor models 8N, NAA, 1801, 2000, 2030, 2031, 2110, 4000, 4030, 4040, 4110, 501, 600, 601, 700, 701, 800, 801, 900, 901, Dexta, Super Dexta. Replaces 81801555, 957E527, 9N527, NCA527A. If you need the plate without the pin, order 9N527. (Item #: 178077, Ref: 8N527) $18.10

Draft Control Spring Seat - Exact of original. Fits all models (1939 to 1964), NAA, Jubilee, Dexta, Super Dexta, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 2000, 4000. Replaces: 2N624, 957E624. (Item #: 178127, Ref: 2N624) $9.70

Felt, Spring Seat - Hydraulic Lift Draft Control Spring Seat. For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (1939-1962). (Item #: 178061, Ref: 9N529) $4.90

Friction Disc for Hydraulic Control Lever - Friction Disc for Hydraulic Control Lever, 3 inch diameter, 1/2 inch hole. For tractor models 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, NAA, (2000 and 4000 4 cylinder). Price is for each. (Item #: 111446, Ref: C5NN518B) $2.00

Gasket, Hydraulic Pump Drain - Hydraulic and Transmission Drain plug Gasket. 2 inch inside diameter. Fits Ford Tractors, 1939 to 1964. Replaces: 81804570, 8N7011. (Item #: 112227, Ref: 8N7011) $1.70

Hydraulic Lift Control Quadrant - For tractor models 8N, 9N, 2N. Hydraulic Lift Control Lever connects to this. Also fits NAA, Jubilee, 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 1939-1964 4 cylinder. Replaces 2N516A1, 2N516A2, 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $27.00

Hydraulic Lift Cover Repair Kit - For NAA 1953-54, Jubilee. Lift Cover Repair Gasket Kit. The kit contains (2) NAA552A gaskets, (1) NAA553B gasket, (1) NAA473A backup washer, (1) NAA502A gasket, (1) NAA533A piston O-ring, (1) 44R011 O-ring, (1) 44R112 O-ring, (1) 44R113 O-ring, (1) 44R114 O-ring. (Item #: 150635, Ref: LCRK5354) $7.60

Hydraulic Lift Level Indicator (Dip Stick) - 8N, 9N, 2N, NAA. Hydraulic Lift Level Indicator. (Item #: 111308, Ref: NAA927C) $5.90

Hydraulic Lift Lever - For tractor models 8N, 9N, 2N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 4 Cylinder). (Item #: 178133, Ref: S.66598) $20.60

Hydraulic Lift Piston Connecting Rod - For Dexta, NAA, 2N, 8N, 9N, 2000, 3000, 4000, 600, 700, 800, 900. Replaces NCA526A and 957E526, 9N526. (Item #: 155017, Ref: 86563314) $33.20

Hydraulic Lift Ram Arm - For NAA, Jubilee. (Item #: 179756, Ref: NAA545A) $118.00

Hydraulic Lift Shaft - For tractor models: 8N, 9N, 2N, NAA, Jubilee, 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901. Hydraulic lift shaft. [PLEASE NOTE: THIS SHAFT HAS 1 THREADED HOLE ON EACH END. IT WILL REPLACE OLDER STYLE USED ON 8N, 9N, 2N TRACTORS WITH 2 HOLES ON EACH END BUT WILL REQUIRE 2 WASHERS PART number NCA551A and (2) 7/16 inch-20 X 11/16 inch BOLTS. WASHERS AND BOLTS NOT CURRENTLY AVAILABLE FROM YESTERDAYS TRACTOR]. (Item #: 165431, Ref: NCA544B) $343.00

Hydraulic Lift Shaft Arm - For 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000 gas. (Item #: 114032, Ref: 9N543B) $54.00

Hydraulic Lift Shaft Bushing - This Hydraulic Lift shaft Bushing measures inside diameter 2.000 inches, outside diameter 2-3/8 inches, length 3.00 inches. Sold individually, 2 used per tractor. For tractor models 8N, 9N, 2N, NAA, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000, 3000, 4114. Replaces 86534029, 9N531C (Item #: 173523, Ref: 9N531C) $15.20

Hydraulic Line Set - This manifold fits tractors with piston type pump (round body) for tractor models: Jubilee, NAA. (Item #: 178967, Ref: NAA876A) $314.00

Hydraulic Pump - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. This item may take up to two weeks for delivery. To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters. (Item #: 126603, Ref: NAA600D) $940.00

Hydraulic Pump Cover and Pin - For Ford tractor models NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2031, 2110, 2111, 2120, 2131, 4000, 4030, 4031, 4110, 4120, 4121, 4130, 4131, 4140, Compatible with Ford Construction and industrial models 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4040, Replaces Ford OEM number 312059, NCA893A, For Piston Pump Only, (Item #: 113714) $108.00

Hydraulic Pump Drive Shaft - Hydraulic pump shaft. 3/4 inch diameter, 9-1/4 inch overall length. End A type: key, 3/4 inch size, End B type: 6 spline, 3/4 inch size. Associated components end A flex. coupler: L601-14 (3/4 inch bore drive flanges both sides), end B hub: 1 inch. Fits NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840. (Item #: 112068, Ref: 194355) $24.70

Hydraulic Pump Drive Shaft - Shaft is 3/4 inch diameter, 9-3/8 inches overall length. End A type: key, 3/4 inch size. End B type: 10 spline, 1 inch size. Associated components: end A mates to flex coupler number: L601-14 (3/4 inch bore drive flanges both sides) and end B mates to hub number: 290421. Pump Drive for 1953-1964 tractors: 600, 601, 700, 701, 800, 801, 900, 901, Jubilee, NAA, 2000, 4000. (Item #: 111747, Ref: 195454) $42.30

Hydraulic Pump Gasket Kit - Piston Type Hydraulic Pump Gasket and O-Ring Kit. For 2000, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901, NAA. (Item #: 182513, Ref: FPN910B) $33.10

Hydraulic Pump Gear - Main gear for piston pump. Center of gear is 6 spline. Replaces NCA908A. For tractor models 2000 4 cylinder, 4000 4 cylinder, 600 Series, 601 Series, 700 Series, 701 Series, 800 Series, 801 Series, 900 Series, 901 Series. Replaces C0NN908A (Item #: 112072, Ref: C3NN908A) $39.95

Hydraulic Pump Gear Housing - For tractor models NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 113718, Ref: NCA905C) $229.00

Hydraulic Pump Hub - Hydraulic pump hub for Sherman 54 series loader. Hydraulic pump hub 3 7/8 inch outside diameter, 2 3/4 inches center to center on holes. 6 spline center bore, 3/4 inch inside diameter, 7/16 inch smooth ID mounting holes. (Item #: 111639, Ref: 54C2055) $48.30

Hydraulic Pump Mounting Gasket - On four cylinder Ford tractors 1953-1964, this gasket mounts both gear type and vane type hydraulic pumps to the engine. (Item #: 167408, Ref: EAF911B) $1.20

Hydraulic Pump Needle Bearing - Needle Bearing Assembly for Pump Housing. For 2000, 4000, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, Jubilee, NAA. Replaces: 36433, NCA881A (Item #: 123075, Ref: NCA881A) $11.90

Hydraulic Pump Piston - Hydraulic pump piston with an diameter of 5/8. 6 used per piston, sold individually. Measure old piston before ordering as 2 different diameters were used on some models, Replaces 81801696. For models: Jubilee, NAA, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000 3 cylinder, 2000 4 cylinder, 2031, 2111, 2120 4 cylinder, 2131, 2150, 2300, 2310, 2600, 2600V, 2610, 3000, 3055, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 3600, 3600V, 3610, 4000 3 cylinder, 4000 4 cylinder, 4000SU, 4031, 4100, 4120, 4121, 4131, 4190, 4200, 4330, 4410, 4600, 4600SU, 4610, 6000. (Item #: 184993, Ref: NCA615C) $10.60

Hydraulic Pump Plate - Used on Piston Pumps, 1953 and later on Ford Tractors, this place replaces Ford Part numbers 310205, C0NN852A, C0NNH852A (Item #: 170934, Ref: C0NN852A) $36.20

Hydraulic Pump Pressure Plate - This hydraulic pump pressure plate is for Vane style pumps. It has a Manganese phosphate coating is 2.440 inches across and 0.797 inches tall. It is used on all 1954 to 1955, up to serial number 66849 using 3/4 inch wide vane style pumps. Replace original part number NCA969B. (Item #: 182959, Ref: NCA969B) $147.00

Hydraulic Pump Repair Kit - Hydraulic Pump Repair Kit is for the Piston Type Pump. Services 1953-1964 four cylinder gas and diesel tractors. For tractor models NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 701, 800, 801, 900, 901, 2000, 4000. Will service NCA600C and NCA600F pumps. Replaces CCPN600A and CCPN600B. (Item #: 111682, Ref: CCPN600AB) $49.00

Hydraulic Pump Shaft - Wobble Shaft For 4 Cylinder Models (1953-1964) Using NAA600D Or NCA600F Pump Assemblies. For tractor models: 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681 (Item #: 111681, Ref: NCA966E) $73.00

Hydraulic Pump Shaft Bearing Cone - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114636, Ref: D5NN1201A) $6.50

Hydraulic Pump Shaft Bearing Cup - Use with pump shaft NCA966E. For tractor models NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, (2000, 4000 1964 and prior). (Item #: 114635, Ref: D5NN1202A) $3.00

No
Picture
Hydraulic Pump Shaft Oil Seal - For piston type pump. Measures inside diameter 0.9350 inch, outside diameter 2.004 inch, width 0.5315 inch. For tractor models: NAA, 600, 601, 700, 701, 800, 801, 900, 901. (Item #: 117609, Ref: NCA851A) $6.50

Hydraulic Pump Shaft for Loader - APPLICATION: 720 Loader. (Mates to end coupler L601-14 and End hub 290421). SHAFT DIAMETER: 3/4 ", SHAFT OVERALL LENGTH: 8-3/8 ", END A TYPE: Key, END A SIZE: 3/4 ", END B TYPE: 10 Spline, END B SIZE: 1 ". (Item #: 172481, Ref: 197118) $40.40

Hydraulic Pump Wobble Shaft Thrust Plate - This Wobble Shaft Thrust Plate (Bearing) is used in Piston Style Pumps. Fits Models: NAA, Jubilee, 231, 335, 340, 340A, 340B, 345C, 345D, 445, 445A, 445C, 445D, 531, 540, 541A, 540B, 545. 545A, 545C, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 750, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 2000, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4500, 4600. It replaces original part numbers NCA858A, 81802059, C0NN858A. (Item #: 178969, Ref: C0NN858A) $48.21

Hydraulic Pump, Remanufactured - Complete Piston Type Pump can also replace the Vain Style Pump (Hydraulic Manifold must be changed to a Piston Type if replacing a Vain Type. Available for an NAA only as part number NAA876A). Replaces NCA600C and NCA600F. For NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4 cylinder, 4000 4 cylinder. Replaces: NAA600D, NCA600C, NCA600F. The is a remanufactured version of NAA600D. Add $250.00 core charge to price - you will receive instructions for returning your core for a refund if you have one available. This item may take up to two weeks for delivery. (Item #: 205308, Ref: NAA600DR) $817.01

Hydraulic Pump, Remanufactured, NAA600D - For Ford tractor model NAA, Replaces Ford OEM number NAA600D, Piston Pump, To validate your warranty: A contaminated system should be completely flushed by an authorized dealer. Use new, clean fluid and filters, (Item #: 204471) $970.01

Hydraulic Spring Seat - For tractor models 8N, 9N, 2N, NAA, 600, 900 (1948-1954). Also replaces 181083M1 and 181098M1. (Item #: 182473, Ref: 9N525B) $17.30

Hydraulic Wobble Shaft Plate - For tractor models 900, 901, 941, 950, 951, 960, 961, 971, 981, NAA, NAB. Replaces 81813626. (Item #: 172706, Ref: NCA859A) $56.00

Lift Cover Gasket - This Lift Cover Gasket is used on Ford 9N, 2N, 8N, NAA and Jubilee Tractors. Replaces NAA502A (Item #: 112063, Ref: NAA502A) $3.20

Lift Piston - This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models NAA, NAB, 8N, 9N, 2N, Jubilee. (Item #: 116069, Ref: NAA530B) $24.50

$Ford NAA Lift Piston - 2-1\2 inch O-Ring Kit$
Lift Piston - 2-1/2 " O-Ring Kit - For Ford tractor models NAA, 2N, 8N, 9N Replaces Ford OEM number NAA473A, 44R330, , Compatible with Massey Ferguson tractor models F40, TE20, TEA20, TO20, TO30, TO35 (s/n 179304-earlier) Replaces Massey Ferguson OEM number 44R330, , Compatible with Massey Harris tractor models 50, Contains O-Ring 44R330 (116071), Backup Ring NAA473A (112216), For Lft Piston use Item #: 116069, (Item #: 116293) $9.90

Lock Washer, Assembly - Lock Washer Assembly for hydraulic lift shaft to arm. For tractor models 9N, 8N, NAA (1939-1954). (Item #: 179246, Ref: 9N550) $5.70

Plate Hydraulic lift Control - Friction plate for hydraulic lift lever control. Use with disc C5NN518B. For 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, Jubilee, NAA 2N516B. Uses friction disc C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Item #: 111910, Ref: 9N515) $27.00

Quadrant Stop Kit - For tractor models 2000 4 Cylinder, 2N, 4000 4 Cylinder, 8N, 9N, Jubilee, NAA, NAB, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 660, 661, 671, 681, 700, 701, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031 all with 4 Cylinder from 1939 to 1964. (Item #: 126615, Ref: 9N521) $8.30

Swivel - Draft Control - For tractor models NAA, Jubilee, 600, 601, 800, 801, 2000, 4000 (except Row Crop), Dexta, Super Dexta. (Item #: 185370, Ref: 957E692) $27.10

Vane Type Hydraulic Pump Kit - For 5/8 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces: vane set: CPN981A, ring: EAF973B, o-ring: EAF980A (Item #: 178623, Ref: CPN972B) $471.42

Vane Type Hydraulic Pump Kit - For 3/4 inch thick Vane Rotor. For tractor models NAA, Jubilee, 600, 700, 800, 900. Replaces CPN981B (Item #: 178627, Ref: CPN972C) $496.00

Universal Parts and Accessories
Category: Hydraulic System

Coupler Flange - FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Item #: 108772, Ref: L36-6) $64.00

Coupler Flange - Drive flange; 3/4 inch round bore with set screw 1/4 inch x 3/8 inch. 1-15/16 inch spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Item #: 112104, Ref: 191061) $22.00

Coupler Hub Drive Kit - Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Item #: 112067, Ref: L601-14) $124.00

Coupler for Pump Shaft - The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Item #: 114586, Ref: S340) $36.00

Cylinder Seal Kit, For 2 inch cylinders - For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Item #: 183971, Ref: HSK2002) $24.50

Cylinder Seal Kit, For 3 inch Cylinders - For TISCO brand side and top link replacement cylinders ONLY. Seal Repair Kit for 3" cylinders. For cylinder numbers: HTL3101, HTL3102, HTL3103, HSL3201, HSL3202, HSL3203. Replaces HSK3001. (Item #: 179480, Ref: HSK3002) $32.10

Filter Element - 25 Micron replacement element for SF1-25. (Item #: 182541, Ref: 1A9023) $15.40

Filter Element - 10 Micron replacement element for SF1-10. (Item #: 120092, Ref: 1A9021) $13.60

Hub - 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. Used with C5NNN879A hub. (Item #: 160204, Ref: 291315) $65.00

Hydraulic Hose Assembly-NPT, 12 inch - Universal. 12 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118257, Ref: H42-2M-12) $11.00

Hydraulic Hose Assembly-NPT, 180 inch - Universal. 180 inch (15 Feet) overall length. 1/2 inch inside diameter. 2 Wire. Solid Male 1/2 inch NPT thread on both ends. (Item #: 179906, Ref: H42-2M-180) $55.50

Hydraulic Hose Assembly-NPT, 24 inch - Universal. 1/2 inch I.D. double wire braid (SAE-2R) with 1/2 inch NPT solid male fittings both ends. 24 inch overall length. Replaces OEM # - 407435R1. (Item #: 118256, Ref: H42-2M-24) $14.10

Hydraulic Hose Assembly-NPT, 30 inch - Universal. 30 inch overall length. 1/2 I.D. 2 Wire. Solid Male 1/2 NPT thread on both ends. (Item #: 118259, Ref: H42-2M-30) $16.10

Hydraulic Hose Assembly-NPT, 36 inch - Universal. 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends, 36" overall length. Replaces OEM 407436R1. (Item #: 118260, Ref: H42-2M-36) $15.20

Hydraulic Hose Assembly-NPT, 48 inch - Universal. I.H.C.: 1/2" I.D. double wire braid (SAE-2R) with 1/2" NPT solid male fittings both ends. 48" overall length. Replaces OEM # - 407437R1. Hydraulics: 48 inch overall length (Item #: 118261, Ref: H42-2M-48) $16.50

Hydraulic Pump Drive Flange - The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Item #: 128567, Ref: 192199) $21.10

Hydraulic Pump Mounting Bracket - This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8 inch diameter, 4-3/16 inch center to center. Also 2 foot mount holes 3/8 inch diameter, 5 inch center to center. Center pilot hole 3-1/4 inch diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Item #: 184547, Ref: 33020-1) $377.00

Hydraulic Pump for Loader - Part Description: Pump, Hydraulic For 730 LOADER, 735 LOADER. SPECS: CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, PORT SIZE INLET: 1-5/8 inches-12 ORB, PORT SIZE OUTLET: 1-5/16 inches-12 ORB, MOUNTING: 2 bolt SAE "B", FORD PUMP APPLICATION: 730 and 735 loaders, CAPACITY GPM at RPM: 21.5 at 2000, SHAFT DIAMETER: 7/8 inch, SHAFT TYPE: 13 spline, ROTATION: Left hand, MOUNTING: 2 bolt SAE "B", INLET: 1-5/8 inches-12 ORB, OUTLET: 1-5/16 inches-12 ORB. The 2 bolt mount slots are 9/16 inch and open on the ends. Minimum measurement between the slots are 5 1/4 inches and Maximum is 6 7/8 inches. (Item #: 127269, Ref: 7702425-29Z) $780.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with some 701, 702 and 703 Loaders. It is 14 Gallons Per Minute at 2000 RPM. The shaft is 3/4 inch round with a key way. Left Hand Rotation. Inlet is 1 Inch NPT. Outlet is 3/4 Inch NPT. Mounting bolt spacing 4 3/16 inches center to center. Comes with two adapters. Contains: 1-720FSO-3/4X3/4 HC4008 adapter, 1-720FSO-1X1-1/4 HC4009 adapter. This Pump may work in other loader application. Verify Specs before ordering. (Item #: 182700, Ref: L827-10X-LB) $600.00

Hydraulic Pump, Front Mounted - This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE A Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Item #: 182701, Ref: 40P018LAJSA) $720.00

Hydraulic Valve Kit - Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Item #: HV4030) $787.98

LBP Coupler Center - Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Item #: 178931, Ref: 192169) $75.00

LBP Hydraulic hose Assembly - Hydraulic hose assembly. For Ford model 740 LOADER. (Item #: 179521, Ref: 7701142) $30.30

Moreflex Series 352 Coupler Drive Flange - Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Item #: 112243, Ref: L78-13) $28.00

Morflex Center Member - This is a 1-302 Morflex Center member. It measures 3-1/8 inch diameter, four 1/4 inch holes, 1-15/16 inch bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Item #: 116952, Ref: 191192LBP) $49.00

PTO Mounted Hydraulic Pump - For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows normal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommended hose sizes 1 1/4 inlet, 3/4 outlet. (Item #: 120040, Ref: HC-PTO-1A) $1307.44

Top Link, Hydraulic - FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 inch cylinder bore, 8 inch stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Item #: 167145, Ref: HTL3103) $270.00

Universal Pressure Gauge, Hydraulic - 300lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas crystal. 1/4 NPT male brass fitting. (Item #: 184977, Ref: GG300) $11.37

Universal Pressure Gauge, Hydraulic - 3000 Lb. Gauge. Glycerin Filled. Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Plexiglass crystal. 1/4 inch NPT male brass fitting. (Item #: 178343, Ref: GG3000) $14.60

Universal Pressure Gauge, Hydraulic - 1000 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172285, Ref: GG1000) $13.50

Universal Pressure Gauge, Hydraulic - 600 Lb. Gauge. Glycerin Filled. Stainless Steel Case 2-1 2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1 4 NPT male brass fitting. (Item #: 172337, Ref: GG600) $13.91

Universal Pressure Gauge, Hydraulic - 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Item #: 178202, Ref: GG400) $10.70

Universal Pressure Gauge, Hydraulic - 60lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglass crystal. 1/4 NPT male brass fitting. (Item #: 172338, Ref: GG60) $13.91

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories] [All NAA Parts] [All Ford Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy