Welcome! Please use the navigational links to explore our website.

Company Logo
(800) 853-2651 View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford NAA (Golden Jubilee) Parts

Category: Clutch

[Categories]   [All Jubilee Parts]   [All Ford Models]  


Ford Jubilee Clutch Alignment Tool
Clutch Alignment Tool
- 1-3/8 inch 10 spline, .67 inch pilot. This clutch alignment tool is for tractor models with single clutch: 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900. (Part No: 1112-5996)
$6.83

Ford Jubilee Clutch Disc
Clutch Disc
- 9 inch Clutch Disc, hub-1 3/8 inch, splines-10, 6 springs. This clutch disc fits tractor models 8N, 9N, 2N, NAA (4 speed), NAB, 600, 700, 800, 900 (to serial number 14257), 1800, 2130. Improved from original by added springs. Also replaces 84365150, 91A7550, NAA7550A. (Part No: 91A7550WHD)
$30.66

Ford Jubilee Clutch Disc
Clutch Disc
- This 10 inch clutch disc fits tractor models NAA, Jubilee, 600, 620, 630, 640, 650, 660, 700, 800, 900 (4 speed to serial number 14257). 10 Spline x 1 3/8 inch hub. This is a retrofit for 9 inch clutch, must use 10 inch pressure plate and flywheel. (Part No: NCA7550A)
$38.97

No
Picture
Clutch Disc 10 Inch
- Clutch Disc, 10 inch Organic, 10 spline on 1.375 inch hub, Spring Loaded. For 1801, 1821, 1841, 2130, NAA, Jubilee, NAA, NAB, 2110, 2120, 2131, 4120, 4121, 4130, 4131, 4140, 541, 601, 620, 621, 630, 631 (Part No: 313299)
$96.38

Ford Jubilee Clutch Fork To Cross Shaft Pin
Clutch Fork To Cross Shaft Pin
- This Clutch Fork to cross shaft pin is 5/16 inch X 1 1/2 inches. It is used on Ford Tractors built between 1939 and 1964. Replaces 352581S8, 352581-S8, 352581S. (Part No: 352581S8)
$1.50

Ford Jubilee Clutch Kit, 9 Inch, Single Clutch
Clutch Kit, 9 Inch, Single Clutch
- This 9 inch Clutch Kit contains 10 spline spring drive disc part number NAA7550A, 9 inch single pressure plate part number 8N7563, pilot bearing part number C5NN7600A, release bearing part number C0NN7580A and alignment tool. This clutch kit is for tractor models 1800, 1801, 2000 (4 cylinder 1962-1964), 2031, 2110TR, 2120, 2130, 2131, 4000 (4 cylinder 1962-1964), 4031, 4110TR, 4120, 4121, 4130, 4131, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, NAB. (Part No: 8N7563K)
$86.94

Ford Jubilee Clutch Pedal Arm Bushing
Clutch Pedal Arm Bushing
- For tractor models: 8N, Jubilee, NAA, (1948-1954). This bushing is 1.002 inch inside diameter x 1-1/2 inches long. Minimum Order Qty is 2. (Part No: 8N7508B)
$4.95

Ford Jubilee Clutch Release Arm Kit
Clutch Release Arm Kit
- This clutch release arm kit is for tractors 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1958). Clutch Release Arm kit contains: eyebolt part number 355584S8, pin part number 8N7533 and clutch release arm part number 8N7511B. (Part No: S.66657)
$50.33

Ford Jubilee Clutch Release Shaft Fork
Clutch Release Shaft Fork
- This Clutch Release Shaft Fork is used on Ford Tractors 1939 - 1954. Replaces original part number 487515, 48-7515. For models 9N, 2N, 8N, NAA and Jubilee. NOTE: This part is not made to OEM standards, and may require the bored holes to be honed slightly to fit. Unfortunately, we do not have a higher quality part available. (Part No: 487515)
$19.95

Ford Jubilee Clutch Shaft Bushing
Clutch Shaft Bushing
- This clutch shaft bearing has a 7/8 inch inside diameter. This clutch shaft bushing is for tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000. (3 or 4 Speed Transmission only). (Part No: 407508A)
$6.15

Ford Jubilee Pilot Bearing
Pilot Bearing
- This Pilot Bearing measures .669 inches inside diameter, 1.575 inches outside diameter and is .472 inches wide. For tractor models 8N, 9N, 2N, NAA, NAB, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000, Dexta, Super Dexta, Major, Power Major, Super Major. (Part No: C5NN7600A)
$2.76

Ford Jubilee Pressure Plate
Pressure Plate
- This 9 inch single pressure plate, flat flywheel type is for tractor models 1800, 2130, 8N, 9N, 2N, NAA, NAB, 600, 700, 800, 900 with a single clutch. (Part No: 8N7563)
$80.25

Ford Jubilee Pressure Plate, 10 Inch, Single Clutch, New
Pressure Plate, 10 Inch, Single Clutch, New
- This new 10 inch single clutch pressure plate is for tractor models 1800 series, (2000, 4000 4 cylinder 1962-1964), 2120, 2130, 4120, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, NAA, Jubilee. (Part No: B8NN7563A)
$89.61

Ford Jubilee Release Bearing
Release Bearing
- This release bearing is for Ford Tractors with a 9 inch or 10 inch single clutch 1939 to 1964. It has an inside diameter of 2.0625 inches, an outside diameter of 3.515 inches, a width .840 inches. It replaces 78-7580A, 787580A, 787580A8, C0NN7580A. (Part No: N1087)
$12.95

Ford Jubilee Release Bearing Hub
Release Bearing Hub
- This release bearing hub is for tractor models: 1801, 1821, 1841, 2000, 2030, 2031, 2111, 2120, 2130, 2131, 4000, 4030, 4031, 600, 601, 700, 701, 800, 801, 900, 901, 2N, 8N, 9N, NAA, Jubilee, NAB. (Part No: 9N7561)
$40.35

Ford Jubilee Release Bearing Spring
Release Bearing Spring
- This Release Bearing Spring measures .627 inch outside diameter, 4.875 inch overall length and .095 inch wide diameter. For tractor models 8N, 9N, 2N, NAA, Jubilee, 501, 541, 600, 601, 700, 701, 800, 801, 820, 900, 901, 1801, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2110, 2111, 2130, 2131, 4030, 4040, 4031, 4110, 4121, 4130, 4131, 4140. Two are used per tractor. Sold and priced each. (Part No: 9N7562)
$3.95

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Clutch

[Categories]   [All Jubilee Parts]   [All Ford Models]  







PayPal


Customer Service
Monday - Friday
9:00-6:30pm
EST

Order online
anytime!







Your Shopping
is Secure


  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2018 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy