Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 960 Parts

Category: Engine Parts

[Categories]   [All 960 Parts]   [All Ford Models]  


Ford 960 Camshaft Hydraulic Pump Drive Gear
Camshaft Hydraulic Pump Drive Gear
- For tractor models 2000, 4000, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. There are 33 teeth and (4) 5/16 inch bolt holes on this drive gear. Bolts on rear of camshaft with (4) 5/16 inch diameter bolts. NOTE: Early tractors used 1/4 inch bolt holes. Measure before ordering. Also fits New Holland L778 Skid Steer (July 1976 thru July 1980) with 5/16 inch diameter mounting bolts. Fits 134, 172 and 192 CID 4-cylinder gas, LP and diesel engines. Also replaces 500010. This is NOT a Camshaft Timing Gear (See part number EAF6256M ). (Part No: EAF907B)
$51.75

Ford 960 Camshaft Kit, Camshaft and Lifters
Camshaft Kit, Camshaft and Lifters
- Fits the following tractors up to 1965 using 134 or 172 gas 4 cylinder engines that use a pressed on cam gear. NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Order EAF6256M press on cam gear if needed. (Part No: 734145)
$262.75

Ford 960 Camshaft Timing Gear, STD
Camshaft Timing Gear, STD
- Standard Cast Iron Press-on Camshaft Timing Gear. Outside diameter of 6.125 inches and 42 teeth. For tractor models 2000 <1964, 4000 DIESEL 1964, 4000 GAS 1962-1964, 4000 <1964, 501, 600, 601, 700, 701, 800, 800 1955-1957, 801 DIESEL 1964, 801 GAS 1958-1962, 900, 900 1955-1957, 901 DIESEL 1964, 901 GAS 1958-1962, NAA, Jubilee. (Part No: EAF6256M)
$46.70

Ford 960 Camshaft, New
Camshaft, New
- Has Snap Ring type Timing Gear Nose. For tractor models: NAA, Jubilee, 600, 700, 800, 900, 2000, 4000 all with 4 cylinder GAS engines. Used in 134, 144 and 172 CID gas engines. This camshaft does not fit diesel applications. This fits late style with snap ring groove uses EAF6256M press on cam timing gear. It will replace the early style. (Part No: C0NN6251A)
$152.35

Ford 960 Connecting Rod Nut
Connecting Rod Nut
- This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 7HA-6212)
$0.95

Ford 960 Crankshaft Gear
Crankshaft Gear
- This crankshaft gear has 21 teeth for tractor models NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 671, 681, 700, 701, 741, 771, 800, 900, 2000, 4000. For 4cyl gas and DSL, except majors. (Part No: EAF6306B)
$47.51

Ford 960 Crankshaft Pulley
Crankshaft Pulley
- Double Groove Pulley for 2000 (4 cylinder), 4000 (4 cylinder), 600, 601, 700, 701, 800, 801, 900, 901. Replaces C0NN6351A. (Part No: C0NN6351A)
$67.54

Ford 960 Crankshaft, 4cyl Gas
Crankshaft, 4cyl Gas
- Fits 4 cylinder GAS 134 CID and 172 CID engines on: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. Replaces D4JL6300B, C0NN6303J, D1NL6303D, D1NN6300B, D4JL6300B. (Part No: D1NL6303D)
$542.53

Ford 960 Cylinder Head, NEW
Cylinder Head, NEW
- For 134 and 172 CID engine, Cylinder head has 1/2" dia. head bolt holes. Bushings are included for use with 7/16" dia. head bolts. When block has 1/2" dia. head bolt threads, do not use the bushings. For tractor models 2000, 2N, 4000, 501, 600, 601, 700, 701, 800, 801, 8N, 900, 901, 9N, NAA, Jubilee. Includes Guides and Seats. Does not include valves, or springs. Replaces D3JL6049B, 310098, 310100 (Part No: D3JL6049B)
$774.41

Ford 960 Governor Assembly
Governor Assembly
- This Governor Centrifugal Assembly, is an improved weight type. Fits Ford gas engines. Tractors: (NAA, 600, 700, 800, 900). (replaces the flyball type when used with NCA99810A governor compensator rod and spring assembly); 501, 601, 701, 801, 901, 2000 (4 cylinder), 4000 (4 cylinder). (Part No: EAF12470A)
$96.81

Ford 960 Governor Ball
Governor Ball
- These are 3/4 Inch Governor Balls used in production 1952-1958. Later style governors did not use these, and many older tractors have upgraded governors without ball bearings. Replaces part numbers 86624946, 8NNN18229 (Part No: 8NNN18229)
$0.89

Ford 960 Governor Compensating Spring
Governor Compensating Spring
- Mounts between Bellcrank and under battery tray, 6.535 inch overall length, .532 inch outside diameter, .070 inch wire diameter. For tractor models: 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, (2000, 4000 4-cylinder), 2030, 2031, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4120, 4121, 4130, 4140. All from 1954 thru 1964. (Part No: NCA9827A)
$3.95

Ford 960 Governor Compensator Spring Assembly
Governor Compensator Spring Assembly
- 3 Pieces. Replaces NCA99810A. For Jubilee, NAA thru 960 1953-1958 4 cylinder gas. For 501 thru 4140 4 cylinder gas and LP 1958-1964 with engine serial number 26402 and up. (Part No: NCA99810A)
$14.51

Ford 960 Governor Shaft Oil Seal
Governor Shaft Oil Seal
- Governor Shaft Oil Seal, for 134 and 172 CID gas engines. Tractors: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1953 to 1964). (Part No: EAF18183B)
$7.14

Ford 960 Lifter
Lifter
- Valve Lifter fits 134, 144, and 172 gas and diesel engines. For tractor models: NAA, Jubilee, 1801, 2000, 2100, 4000, 501, 600, 601, 700, 701, 800, 801, 900, 901. The stem outside diameter is 0.498 inch, the lifter face outside diameter is 1.023 inch and the overall length is 2.409 inch. Replaces 500295, EAA6500C, EAA6500D, F3JL6500AA. (Part No: F3JL6500AA)
$9.95

Ford 960 Push Rod, 5\16
Push Rod, 5/16
- If replacing 1/4 inch outside diameter push rod, you must also order number 87801302 rocker adjusting screw (not available from YT). For models: [2000 4 cylinder, 4000 4 Cylinder (gas, LP and diesel)], [Jubilee, NAA, NAB, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 1811, 1821, 1841, 1871, 1881, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140, 6000, 6100 (gas, LP and diesel; 4-cylinder)]. Replaces: 500356, C0AE6565C, EBP6565B, EAA6565C. (Part No: 500356)
$6.62

Ford 960 Ring Gear, Flywheel
Ring Gear, Flywheel
- Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Part No: 9N6384)
$22.25

Ford 960 Tappet
Tappet
- For tractor models 2000 before 1964, 4000 diesel 1964, 4000 gas 1962-1964, 500, 600, 700, 800 1955-1957, 801 diesel 1964, 801 gas 1958-1962, 900 1955-1957, 901 diesel 1964, 901 gas 1958-1962, NAA. (Part No: EAA6500D)
$10.43

Ford 960 Timing Gear Set
Timing Gear Set
- Standard press on cam timing gear set includes EAF6306B crankshaft gear and EAF6256M camshaft gear. For models (2000 and 4000 both 1962-64), 500, 600, 601, 700, 701, 800, 801, 900, 901, NAA, Jubilee. Verify part numbers to ensure fit. (Part No: EAF6256MSTD)
$91.44

Ford 960 Valve Key, Intake and Exhaust, Pack of 8
Valve Key, Intake and Exhaust, Pack of 8
- 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine (2 packages of 8). Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 7HA6518)
$2.40


NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Ford 960 Valve Spring
Valve Spring
- Used on Ford tractors, gas and diesel 1953-1964, 4 cylinder engines. Used for both intake and exhaust. 8 used per engine. Priced and sold individually. Replace original part number EAA6513A. (Part No: EAA6513A)
$2.40

Ford 960 Valve Stem Cap, Exhaust
Valve Stem Cap, Exhaust
- This Valve Stem Cap is used on Exhaust Valves, 4 cylinder Ford, 1953-1964. 4 Used per engine. Priced and sold each. Replaces 8EQ6550A (Part No: 8EQ6550A)
$4.10

Ford 960 Valve, Exhaust
Valve, Exhaust
- Exhaust Valve. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: EAF6505D)
$8.57

Ford 960 Valve, Exhaust
Valve, Exhaust
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. For 2000, 4000, NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901. (Part No: EAF6505D)
$8.57

Ford 960 Valve, Exhaust, 172 CID Gas
Valve, Exhaust, 172 CID Gas
- Exhaust valve for 172 CID Gas engine. Uses EAM6518A lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EAF6505D)
$8.57

Ford 960 Valve, Intake,
Valve, Intake,
- Intake Valve for 172 CID Gas engine. Uses 7HA6518 lock. NAA, Jubilee, 500, 600, 601, 700, 701, 800, 801, 900, 901, 2000 up thru 1964, 4000 up thru 1964. (Part No: EBU6507A)
$6.47

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories]   [All 960 Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy