Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 901 Parts

Category: Drive Train

[Categories]   [All 901 Parts]   [All Ford Models]  


Ford 901 3rd Gear
3rd Gear
- This is 3rd Gear in a 5 speed Transmission, 1958 and up. It replaces original part number NDA7137A. (Part No: NDA7137A)
$165.78

Ford 901 Axle Seal, Inner Pair, Pack of 2
Axle Seal, Inner Pair, Pack of 2
- This is a pair of seals. These seals measure 2.000 inches inside diameter, 2.754 inches outside diameter, and are 0.510 inches wide. The seal replaces OEM numbers: 8N4233A, C4NN4233A, NCA4233A, NDA7048A, 8N4233A1, 1014202M1, 103682A, 103682A, 10A12051, 10A2500, 12A2500, 30-3084914, 1E3377, E3377, 103682A, 10A12051, 157166A (Part No: 8N4233A)
$8.85

Ford 901 Center Housing To Transmission Case Gasket
Center Housing To Transmission Case Gasket
- This Center Housing To Transmission Case Gasket (early 1955 - 64) is used on: 4 Speed transmissions (tractor serial number 14256 and Up), 5 Speed transmissions, and 10 speed select-o-speeds transmissions. If you have a 4 Speed transmission below tractor serial number 14256, use part number NCA44025A. This gasket replaces original part number 310590 (Part No: 310590)
$5.25

Ford 901 Gear Shaft, Reverse Idler
Gear Shaft, Reverse Idler
- This reverse idler gear shaft is for tractor models 2000, 2120, 2130, 2131, 4000, 4120, 4121, 4130, 4131, 4140, 600, 601, 650, 651, 660, 661, 800, 801, 820, 821, 850, 851, 860, 861, 900, 901, 950, 951, 960, 961. (Part No: NDA7140A)
$48.04

Ford 901 Gear Shift Boot
Gear Shift Boot
- This gear shift boot has a bottom hole that is 7/8 inch diameter. For 9N, 2N, 600, 700, 800, 900, 601, 701, 801, 901, 2000, 4000 (ALL 1939 TO 1964 WITH 4 SPEED). Gearshift Boot - Restoration Quality. Can be used to replace 9N7277. (Part No: C5NN7277C)
$2.60

Ford 901 Gear Shift Lever Spring
Gear Shift Lever Spring
- Fits the tractors with 3 or 4 speed transmission or 4 speed Torque Converter Transmission, 2.210 inches tall, 1.768 inch tapers to 1.003 inch outside diameter, 0.140 inch wire diameter. For tractor models: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 2030, 2031, 2100, 2110, 2111, 2120, 2130, 2131, 2150, 2300, 2310, 3000, 3100, 3110, 3120, 3150, 3190, 3300, 3310, 3330, 4000, 4030, 4031, 4040, 4110, 4121, 4130, 4131, (4140 4-cylinder), 4140. (Part No: 9N7227B)
$5.95

Ford 901 Gear Shift Lever, with Knob, 4-Speed Transmission
Gear Shift Lever, with Knob, 4-Speed Transmission
- This gear shift lever with knob replaces NAA7209A and 8N7209C shift levers. This newer version has 5/16 inch UNF thread for the shift knob (knob included). The early series 3/8 inch knob thread shaft is no longer available. Note: use gear shift knob C5NN7213A (included) if you need a replacement. This gear shift lever fits tractor with single lever 4 speed or torque converter transmission: 2000, 2110LCG, 3000, 340, 3400, 340A, 3500, 3550, 4000, 420, 445, 4500, 532, 535, 540, 540A, 545, 5500, 600, 601, 700, 701, 800, 801, 8N, 900, 901, Jubilee, NAA (Part No: C5NN7202B)
$77.24

Ford 901 Gear, Mainshaft 2nd
Gear, Mainshaft 2nd
- This transmission mainshaft 2nd Gear has 56 teeth. For NAA, Jubilee, all 4-Speed Ford Transmissions (1955-1964), 8N, 4-Speed Transmission, 1948-1952. (Part No: B9NN7A381B)
$113.38

Ford 901 Input Shaft
Input Shaft
- This is an input shaft used on Sherman Step-Up/Step-Down (Hi Low) gear boxes. It is 8 inches long. Used on Ford Tractors 1955-1964. It replaces original part number C3NN7015D (Part No: C3NN7015D)
$220.32

Ford 901 Input Shaft Tube
Input Shaft Tube
- This Tube is used in 4 Speed Transmissions, Ford 4 Cylinder Tractors 1958-1964. Replaces original part numbers 311202, 311212. (Part No: 311202)
$227.92

Ford 901 PTO Countershaft
PTO Countershaft
- This PTO Countershaft is used in 5 Speed Transmissions 1955-1964. (Part No: NDA701B)
$228.14

Ford 901 PTO Input Shaft
PTO Input Shaft
- This PTO Input Shaft is used on 5 speed transmissions with Live PTO. Used 1958 and later. 7 13/16 inches long. Replaces original part number 311249. (Part No: 311249)
$151.21

Ford 901 Sherman Transmission External Lever
Sherman Transmission External Lever
- Step Up/Step Down Lever. For Tractors with Sherman transmission. Replaces 10A909, 9N7210. For models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900 and 901. (Part No: 9N7210)
$93.09

Ford 901 Shift Cover Plate Gasket
Shift Cover Plate Gasket
- For 4-SPEED transmissions. For tractor models 8N, NAA, Jubilee, 501, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 900, 950, 960, 2000, 4000 (1948-1964), 2000, 3000 (1965-1970). Replaces: 8N7223, D5NN7223A, 81817212, 83906320, 83958318, C7NN7223B, E6NN7223BA (Part No: 8N7223)
$3.39

Ford 901 Shift Knob
Shift Knob
- ThisTransmission Gear-Shift Lever Knob has is 3/8x24 fine thread female. For all 4 and 5 speed transmissions models (1950 to 1964 serial number 252844 and up). 3/8 inch NF - 24 thread. This knob may not fit aftermarket replacement levers. Verify threads if you are unsure. If 5/16 UNF thread is needed, order C5NN7213A (Part No: BB7213A)
$4.58

Ford 901 Side Cover Gasket
Side Cover Gasket
- This Side Cover Gasket fits the following tractor models as a side cover gasket and a PTO shift cover gasket: 2000, 4000, 2N, 8N, 9N, 600, 601, 700, 701, 800, 801, 900, 901, Jubilee and NAA. Price is for each. Replaces part number 9N4131. (Part No: 9N4131)
$.62

Ford 901 Transmission Drain Plug, Magnetic
Transmission Drain Plug, Magnetic
- Used on Ford tractors 1939-1964, this part has the same measurements as part number 9N7010 (2 inch-12 UN Threads) but is also magnetic to collect small metal particulate. Includes gasket. (Part No: 8N7010)
$12.50

Ford 901 Transmission Filter
Transmission Filter
- This transmission filter is exactly like the original, used on Select-o-Speed 601, 801, 901, 2000 and 4000 models, 1959 thru 1964. Replaces C0NN7B155A (Part No: C0NN7B155A)
$26.95



Ford 901 Lucas Hub Oil (quart)
Lucas Hub Oil (quart)
- Lucas Hub Oil was formulated to stop leaks in steering axles and trailer hubs on heavy duty trucks. It also allows hubs to run on a marginal amount of oil in case of a blown seal or poor maintenance. It is an excellent gear lube for racing or heavy duty applications. Key benefits slows leaks, prevents downtime, extremely heat resistant, Very long lasting. (Part No: LU10088)
$10.23

Ford 901 Shift Cover Plate Gasket
Shift Cover Plate Gasket
- For all models with 5-SPEED transmission built between 1955-1964. Not for tractors made overseas, such as Major, Dexta, etc. (Part No: NDA7223A)
$5.07

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Drive Train

[Categories]   [All 901 Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy