Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N Parts

Category: Steering

[Categories]   [All 8N Parts]   [All Ford Models]  


Ford 8N Axle Hardware Kit 4 PCS.
Axle Hardware Kit 4 PCS.
- Bolt Kit, front axle bolt, nut and washer. Holds right and left axles to center axle. Bolts are 3 1/2 inches and 5/8x18. Nuts have 1 1/6 head. For tractors: 8N, 9N, 2N {1939-1952}. For 600, 700, 800, 900, NAA. (Part No: 350789-KIT)
$17.50

Ford 8N Axle Pin Support Bushing
Axle Pin Support Bushing
- This Axle Pin Bushing for models 2N, 8N, 9N, 600, 700, 800, 900, 2000, 4000, NAA, Jubilee. Front Axle Bushing 1939-1964 with standard front axle. Bushing, front axles, 1.778 inch inside diameter, 1.913 inch outside diameter, 1.5 inch length (not for heavy, industrial or grove axles). (Part No: 2N3039)
$7.64

Ford 8N Ball Bearing, Steering Gear
Ball Bearing, Steering Gear
- 3/8 inch ball, used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee.22 required per gear box (Part No: 83424343)
$.38

Ford 8N Drag Link Assembly
Drag Link Assembly
- This Tie Rod Assembly includes 8N3314D tube with both ends with clamps. Tube measures 32.75 inches. Overall measures 35 inches center to center when both ends adjusted in to stop, 9/16 inch by 18 pitch stud, includes Zerk fittings. For tractor models 8N, 9N, 2N. (Part No: 8N3314COMPLT)
$52.78

Ford 8N Drag Link Assembly, LH OEM
Drag Link Assembly, LH OEM
- This Drag Link Assembly is manufactured to look exactly like the original on an 8N before serial number 216989, left side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. It replaces 8N3270C, 8N3305A, 8N3314D, NAA33271A (Part No: 8N3305A)
$74.95

Ford 8N Drag Link Assembly, LH OEM
Drag Link Assembly, LH OEM
- This Drag Link Assembly is manufactured to look exactly like the original on an 8N after serial number 216988, left side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. (Part No: 8N3305B)
$74.95

Ford 8N Drag Link Assembly, RH OEM
Drag Link Assembly, RH OEM
- This Drag Link Assembly is manufactured to look exactly like the original on an 8N before serial number 216989 with early 4 bolt side sector steering gear box. Right side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. It Replaces: 8N3270C, 8N3304A, 8N33315, NAA33271A (Part No: 8N3304A)
$74.95

Ford 8N Drag Link Assembly, RH OEM
Drag Link Assembly, RH OEM
- This Drag Link Assembly is manufactured to look exactly like the original on an 8N after serial number 216988, right side. It adjusts from approximately 36 inches to 39-1/2 inches, center to center tie rod studs. (Part No: 8N3304B)
$74.95

Ford 8N Drag Link Dust Cover
Drag Link Dust Cover
- Steering Drag Link Rear Ball Joint Cover. For tractors: 8N, 9N, 2N, NAA, 600, 800 (1939-1957). Center is black rubber. Small hole end is 5/8 inch hole, Large end is 1 7/16 inch inside diameter. (Part No: 9N3324)
$5.95

Ford 8N Drag Link Dust Cover
Drag Link Dust Cover
- Rear Tie Rod Boot with leather insert. Fits tractor models: Jubilee, NAA, NAB, 2000 4 cylinder, 2030, 2031, 2120, 2130, 2131, 2N, 4000 4 cylinder, 4030, 4031, 4120, 4121, 4130, 4131, 600, 601, 800, 801, 8N, 9N. All 4 cylinder 1939 to 1964. 1.425 inch base, .850 inches tall, .700 inch hole. Replaces: 9N3324, A0NN3324. (Part No: 9N3324OE)
$10.68

Ford 8N Drag Link End, Front, Greasable
Drag Link End, Front, Greasable
- A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A)
$13.71

Ford 8N Drag Link End, Front, Non-Greasable
Drag Link End, Front, Non-Greasable
- This Drag Link End is exactly like the NAA3270A except it is sealed, meaning you never have to grease them! Sealed, A= 3.875 inches, B= .687 inches, 18 left hand thread. Manual steering. For tractor models 8N, 9N, 2N, NAA, NAB, 600, 601, 800, 801, 2000 (4 cylinder 1/1962 to 12/1964), 4000 (1/1962 to 12/1964). Price shown is for each, sold only in multiples of 2 items. Almost exactly the same as 8N3270 except the castle nut end threaded section is 1/16 of an inch longer. (Part No: NAA3270A-N)
$9.99

Ford 8N Drag Link End, Greasable
Drag Link End, Greasable
- Fits 8N 1948-1952. Used on front of drag link. Left hand threads. 3.375 inches long from center of post to end of large thread. Large thread diameter is .687 inches (11/16 inch). (Part No: 8N3270)
$24.27

Ford 8N Drag Link End, Rear
Drag Link End, Rear
- Length 4.250 inches, .687 inch diameter, 18 right hand thread. For tractor models: 8N, 9N, 2N, 2000 4 cylinder 1962-1964, 2031, 2120 1963-1964, 2131, 4000 1962-1963, 4031, 4120, 4131, 600, 601, 800, 801, NAA, NAB. (Part No: NAA33271A)
$12.00

Ford 8N Drag Link Tube
Drag Link Tube
- 34.5 inches long. Uses one right hand (NAA33271A) and one left hand (NAA3270A) Tie Rod End. For tractor models 9N, 2N, (used on right hand side on early 8N and left hand side on late 8N), Dexta, Super Dexta.(**BEFORE ORDERING: Measure your drag link tube length, part number 8N33314D drag link tube was also used on 9N, 2N and 8N tractors. It is 32-3/4 inches long). (Part No: 8N33315)
$38.99

Ford 8N Drag Link Tube
Drag Link Tube
- 32-3/4 inches long. Outside diameter 0.875 inch. Includes clamps (on each end), For 8N, 9N, 2N (For complete tie rod assembly add front drag link ends 8N3270 AND rear drag link ends NAA33271A. (**BEFORE ORDERING: Measure your drag link tube length. Part number 8N33315 drag link tube was also used on these tractors. It is 34-1/2 inches long). (Part No: 8N3314D)
$37.43

Ford 8N Draglink Clamp
Draglink Clamp
- This Drag Link Clamp is used on Ford tractor models 9N, 2N, 8N, NAA, Jubilee, 500, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 and 1801, 1939-1964. It replaces 8N3287. (Part No: 8N3287)
$4.50

Ford 8N Front Axle Assembly with Bushing
Front Axle Assembly with Bushing
- For tractor models 8N, 9N, 2N, NAA, Jubilee, 600, 620, 630, 640, 650, 660, 800, 820, 840, 850, 2000 (with Manual 7-57/PS 55), 4000 (with Manual 7-57/PS 55), Dexta, Super Dexta. This axle is for tractor models that have a standard front end (NOT for adjustable axle). Not warrantied for use with front end loaders. Replaces NAA3010B2. Add $15.00 additional shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: D9NN3010EA)
$168.29

Ford 8N Front Axle Spacer
Front Axle Spacer
- This Front Axle Spacer is on the back of the front axle assembly. It measures 1.77 inches I.D. X 2.75 inches O.D. Used on 8N and NAA/Jubilee tractors, 1948-1954 (Part No: 8N3027)
$0.95

Ford 8N Pin, Front Axle
Pin, Front Axle
- Outside diameter 1.743 inch, inside diameter 1.310 inch, length 4 inches. For tractor models 9N, 2N (serial number 164489 and up), 8N. Hardened steel. The part has a fully open end which will accommodate a loader pump shaft. If you need OEM style with smaller opening, order 2N3126E. (Part No: 2N3126D)
$25.11

Ford 8N Pitman Arm (LH\RH)
Pitman Arm (LH/RH)
- Steering Gear Pitman Arm for tractor models 8N (serial number 216989 and up 1949-1952), NAA, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 2000, 4000. Replaces NCA3590A. Measures 10 inches in length. Big end is splined at 1.06 inside diameter. Small end is smooth at .688 inches. (Part No: 86542743)
$69.48

Ford 8N Radius Rod to Front Axle Pin
Radius Rod to Front Axle Pin
- This model is for model 8N 1948-52. (Part No: 357623S8)
$7.59

Ford 8N Radius Rod, Ball Socket
Radius Rod, Ball Socket
- For tractor models: Jubilee, NAA, 2000 3 cylinder, 2000 4 cylinder, 600, 601, 800, 801, 1811, 1821, 1841, 1871, 1881, 2030, 2100, 2110, 2120, 2130, 2150, 2300, 2310, 2600, 2600V, 2810, 2910, 2N, 3000, 3055, 3100, 3110, 3120, 3150, 3300, 3310, 3330, 3600, 3600V, 3610, 3900, 3910, 4000 3 cylinder, 4000 4 cylinder, 4030, 4100, 4110, 4120, 4121, 4130, 4140, 4410, 4600SU, 8N, 9N, 230A, 231, 233, 234, 333, 334, 335, 340, 530A, 531, 540, 3400, Dexta, Super Dexta. Replaces: 9N3442, E0NN3N442BA, C5NN3N442C, C5NN3N442A, GL139. (Part No: E0NN3N442BA)
$17.28

Ford 8N Radius Rod, Socket Cap
Radius Rod, Socket Cap
- Used with Socket E0NN3N442BA. Replaces: E0NN3N406BA, 8N3440B, C7NN3N406A, 957E3440B, 83924040, 957E3440A, 313319. (Part No: E0NN3N406BA)
$13.41

Ford 8N Seat Shock Bushing
Seat Shock Bushing
- This bushing is for the horizontal bolt hole. It measures 1.223 inches outside diameter at the largest point. The hole inside diameter is 0.597 inches. The length measures 0.724 inches overall. 2 to 4 used per shock. This part replaces 72696R1, 70222488, T19118, 230288, 250416R1, F3296R, R26832, 760674M1. Used with optional Monroe seat (Part No: 72696R1)
$2.25

Ford 8N Sector Bushing
Sector Bushing
- Steering Gear Sector Bushing is 1 1/2 inches long. For tractors: 8N, 8NAN to serial number 216988 {1948-1949}. 4 required per tractor, sold individually. (Part No: 8N3576A)
$5.95

Ford 8N Sector Bushing
Sector Bushing
- Steering Gear Sector Bushing .84 inches long. For tractors: 8N, 8NAN, NAA, NAB serial number 216988 and up. 2 required per tractor, sold individually. (Part No: 8N3576B)
$9.13

Ford 8N Sector Shaft Seal
Sector Shaft Seal
- This Seal Measures 1.125 inches inside diameter, 1.442 inches outside diameter, and 0.200 wide. Verify size or OEM number before ordering. Many of these tractors used more than one size. The Sector Shaft (Pitman Arm) Seal is used on Ford tractors: 2000, 2110LCG, 231, 233, 2600, 3000, 333, 335, 3400, 3600, 3900, 4000, 4000SU, 4100, 4110LCG, 4600SU, 531, 532, 600, 601, 800, 801, 8N, Jubilee, NAA. Replaces 81803188, 8N3585, 8N3591, 8N3591A, 8N3591B, AT67782, C5NN3C615A, D5UZ3591A, D5UZ3591B, 1L6784, D9NN7R510B. (Part No: C5NN3C615A)
$3.08

Ford 8N Spindle \ King Pin Repair Kit
Spindle / King Pin Repair Kit
- For 8N, 9N, 2N, NAA, Jubilee. Spindle Repair Kit includes 2 each of: upper spindle seal C5NN3125A, spindle top bushing 2N3109, spindle bottom bushing 2N3109, and thrust bearing C0NN3123B. (Part No: S.65986)
$24.29

Ford 8N Spindle Bushing
Spindle Bushing
- FORD Spindle Bushing - 1.250 inch inside diameter, 1.370 inch outside diameter, 1.500 inches long. Fits many models. Two are used 1955 and later. Four used per tractor 1939-1954. Sold individually. Replaces: 2N3109, 81802940, 957E3109B, C5NN3446A. (Part No: 2N3109)
$3.72

Ford 8N Spindle Nut
Spindle Nut
- Fits on Front Spindles. Castle Nut 3/4 inch x 16 UNF. Replaces P2060, VLG3307, 351129S, 353928X1, 354573S36, 387930S36, 646060M1, 83416613, 83900513, 83910701, 880284M1, 9073, 98A750N. (Part No: 387930S36)
$1.13

Ford 8N Spindle Thrust Bearing
Spindle Thrust Bearing
- Thrust Bearing for Spindle measures 1.345 inch inside diameter, 2.2 inch outside diameter, and width of .622 inch. For tractor models 2000, 2600, 2N, 3000, 3600, 3900, 4000, 4100, 4600SU, 600, 700, 800, 8N, 900, 9N, Dexta, NAA, Jubilee, Super Dexta. (Part No: C0NN3123B)
$5.45

Ford 8N Spindle, Front
Spindle, Front
- Right Hand Spindle For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Part No: 8N3105B)
$62.03

Ford 8N Spindle, Front
Spindle, Front
- Left Hand Spindle. For 8N, NAA, Jubilee. REPLACES F3NN3105AA. Spindle shaft is 10 3/4 inches with notch on outside and 1/4 inch keyway on inside. Used with Steering Arm part number 310799, bushing part number 2N3109, wheel hub part number 86511582, thrust bearing part number C0NN3123B, wheel bearing kit part number CBPN1200A. (Part No: 8N3106B)
$46.64

Ford 8N Steering Arm
Steering Arm
- Spindle steering arm, for manual and power steering models: 2000, 230, 230A, 231, 2310, 233, 234, 2600, 2610, 2810, 2910, 3000, 333, 334, 335, 3600, 3610, 3900, 3910, 4000, 4000SU, 4100, 4110, 4600, 4600SU, 4610SU, 530, 530A, 531, 600, 601, 800, 801, 8N, Dexta, Jubilee, NAA, Super Dexta. Steering Arm replaces 310799, 81811668, 8N3130B, 957E3130 (Part No: 310799)
$38.61

Ford 8N Steering Arm Dust Seal
Steering Arm Dust Seal
- For tractor models 2000, 3000, 4000, 600, 800, 8N, 900, NAA. Replaces C5NN3125A. (Part No: 8N3528)
$3.48

Ford 8N Steering Box Side Cover Gasket
Steering Box Side Cover Gasket
- This is an Aluminum Gasket for Steering Box Side Cover used on Ford 8N prior to serial number 216989. (Part No: 8N3581A)
$3.95

Ford 8N Steering Column Bearing Spring
Steering Column Bearing Spring
- This Steering Column Bearing Spring is for tractors without power steering 8N, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 (1948-1964). (Part No: 8N3520)
$2.95

Ford 8N Steering Column Seal
Steering Column Seal
- This Felt Dust Seal is for the top of steering column. Tractors: 8N, through 4000 4 cylinder. (1948-1964). Replaces D8NN3N898AA, 83911611, 81803114 (Part No: 8N3570)
$1.50

Ford 8N Steering Column Shim Kit
Steering Column Shim Kit
- This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. For tractor models 8N with 2 bolt adjuster covers, NAA, Jubilee, 600, 601, 800, 801, 2000, 3000, 4000, 2600 manual steering, 3600, 3900, 2610, 3610, 3910 manual steering, 4110LCG. Replaces 251296, 8N3595C, 8N3595D (Part No: 8N3595KIT)
$11.95

Ford 8N Steering Column Spring Seat
Steering Column Spring Seat
- For Steering Column Bearing (without power steering). Tractors: 8N and up (1948 to 1964). (Part No: 8N3518)
$3.50

Ford 8N Steering Gear Assembly
Steering Gear Assembly
- Complete manual steering gear assembly fits late 8N [2 bolt - Sector Shaft Cover] (1949-52). NOTE: Can replace EARLY style Gear Box [4 bolt - Sector Shaft Cover] by swapping drag links side to side. (Part No: 8N3505B)
$609.96

Ford 8N Steering Gear Side Cover O-Ring
Steering Gear Side Cover O-Ring
- This Steering Gear Side Cover O-Ring is used on 8N after serial number 216988 and other some Ford Tractors 1953-and later. 2.500 inches inside diameter. x .139 inches thick. Replaces 8N3581B. 87073S94, 9636445 (Part No: 8N3581B)
$1.95

Ford 8N Steering Gear, Aftermarket Box
Steering Gear, Aftermarket Box
- This Double Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67671)
$63.67

Ford 8N Steering Gear, Aftermarket Box
Steering Gear, Aftermarket Box
- This Single Sector is used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67670)
$63.78

Ford 8N Steering Gear, Inner Race
Steering Gear, Inner Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67672)
$7.49

Ford 8N Steering Gear, Outer Race
Steering Gear, Outer Race
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67673)
$15.38

Ford 8N Steering Gear, Pitman Shaft Bushing
Steering Gear, Pitman Shaft Bushing
- For tractor models 8N, NAA 1949-1954. (Part No: 8N3553)
$4.95

Ford 8N Steering Gear, Shaft
Steering Gear, Shaft
- Used in S.67077 and S.67078 steering boxes only. Will NOT fit in OEM boxes. For tractor models 8N, NAA, Jubilee. (Part No: S.67668)
$130.01

Ford 8N Steering Sector Kit
Steering Sector Kit
- This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For tractor models (8N 1950-1952), Jubilee, NAA, 600, 800, 601, 801, 2000, 4000 all before 1965. Replaces the following OEM numbers: 1023837M1, 180560M1, 180562X1, 1A6763A, 1A-6763-A, 1AS6822, 1AS-6822, 1E-6757-A, 1E6757A, 1E6764, 1E-6764, 1E6784, 1E-6784, 1L6774, 1L-6774, 1L6784, 1L-6784, 22-456X, 251294, 33544, 33545, 34690S, 34692S, 34813S, 353428X1, 353436X1, 353440X1, 44730S, 830628M91, 833455M1, 87073S91, 87073S94, 8N33544A, 8N33544B, 8N33544C, 8N33544D, 8N33545, 8N3585, 8N3586, 8N3591, 915086, 920089, 9636445, D5UZ3591A (Part No: S.67109)
$17.06

Ford 8N Steering Sector Retainer Seal
Steering Sector Retainer Seal
- This Steering Sector Retainer Seal is used on Ford Tractors 1949 to 1964. Measures 1.125" I.D., 1.442" O.D. and 0.200" wide. It replaces 8N3585, 8N3591, 8N3591A, 8N3591B, D5UZ3591A, D5UZ3591B (Part No: 8N3591B)
$6.50

Ford 8N Steering Sector Shaft Seal
Steering Sector Shaft Seal
- Two of these felt seals are used per tractor. It measures 1.470 inch outside diameter, 0.925 inch inside diameter and 0.360 inch thick. Replaces 81826045, 8N3586, D2NN2N171A, 86553476, C5NN3586A (Part No: 8N3586)
$1.20

Ford 8N Steering Sector, Left Hand
Steering Sector, Left Hand
- Left Hand Steering Sector Shaft (Single Gear) 5 tooth. For 8N serial number 216989 and up, NAA, 600, 700, 800, 900, 2000, 4000. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. Shaft cover must be late style. Replaces OEM numbers 251293 and C3NN3526A. (Part No: 251293)
$158.70

Ford 8N Steering Sector, Right Hand
Steering Sector, Right Hand
- Sector (Double Gear) 7 tooth. Replaces OEM numbers 251294, C3NN3527A. If your left hand does not have 5 teeth, you can use this part but must replace both right and left. (Part No: 251294)
$156.44

Ford 8N Steering Shaft & Nut Assembly
Steering Shaft & Nut Assembly
- Right hand spiral with single bolt sector adjustor. For tractor models 8N (1950->1952). (Part No: 8N3575B)
$134.84

Ford 8N Steering Shaft & Nut Assembly
Steering Shaft & Nut Assembly
- For 8N 1948-1949 with 4 bolt Sector Adjustor. LEFT HAND SPIRAL. Serial number less than 216989 (1948-1949). (Part No: 8N3575A)
$196.62

Ford 8N Steering Shaft Bearing
Steering Shaft Bearing
- For tractor models up to 1964 including: 8N, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3571-OE)
$11.99

Ford 8N Steering Shaft Bearing And Cup Assembly
Steering Shaft Bearing And Cup Assembly
- Replacement for bearing type. For tractor models 1948-1964, 8N, NAA, 600, 800. For steering shaft on tractors with manual steering. This is a one piece neoprene bearing that replaces 1 of 8N3552 and 1 of 8N3571. Price is for One (1) assembly - Two (2) assemblies required per steering shaft/top and bottom. (Part No: 8N3571-52)
$19.31

Ford 8N Steering Shaft Bearing Assembly
Steering Shaft Bearing Assembly
- For Steering Column (without Power Steering). Ford tractors 1948 to 1964. Replaces 8N3517, C5NN3N716A, 310875, B7NN3517A. For models without Power Steering NAA, 1801, 2000, 2030, 2031, 2110, 2111, 2120, 2130, 2131, 4000, 4031, 4040, 4110, 4121, 4130, 4131, 600, 601, 700, 701, 800, 801, 8N, 900, 901. (Part No: 8N3517)
$17.50

Ford 8N Steering Shaft Bearing Cup
Steering Shaft Bearing Cup
- This Steering Shaft Bearing cup is used with Bearing Cone part number 8N3571-OE and measures 1.75 inches outside diameter. For tractor models up to 1964 including: 8N late, NAA, Jubilee, 600, 601, 800, 801, 2000, 4000. (Part No: 8N3552)
$6.95

Ford 8N Steering Shaft Bearing and Cup Assembly - Pack of 2
Steering Shaft Bearing and Cup Assembly - Pack of 2
- 1-3/4 inch outside diameter. For tractor models 8N, NAA, Jubilee, 600, 800, 601, 801, 2000, 4000. Price is for 2 Sets (2 Bearings and 2 races. 2 sets are required per steering shaft/top and bottom. Replaces 8N3571 and 8N3552. (Part No: 8N3505)
$33.75

Ford 8N Steering Shaft Gear Thrust Bearing Retainer
Steering Shaft Gear Thrust Bearing Retainer
- For tractor models 631, 640, 641, 650, 651, 660, 661, 671, 681, 8N, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881. (Part No: 8N33581)
$3.27

Ford 8N Steering Shaft Grommet
Steering Shaft Grommet
- Steering Column to Instrumental Panel Grommet measures 1 1/2 inches inside diameter, 2 1/8 outside diameter and is 1/4 inch thick. For tractors: 8N {1948-1952}. (Part No: 8N3578)
$4.50

Ford 8N Steering Wheel
Steering Wheel
- This 3 spoke (covered spoke) steering wheel measures 18 inches in diameter on an 11/16 (tapered) 36 splined hub and comes with a cap. Not like original. For 4 cylinder models, 8N, NAA, 600, 700, 800, 801, 900, 2000, 4000, 2600, 2610, 3000, 3600, 3610, 4100, 4110, 4600, 4610, 5000, 5600, 6600, 6610, 7000. (Part No: D6NN3600B)
$29.82

Ford 8N Steering Wheel
Steering Wheel
- Steering Wheel OEM Style, 17-1/2 inch diameter, 11/16 inch 36-SPLINE Hub. Metal Spokes. For: 8N, 2000, 4000, 600, 700, 800, 900, NAA. (R2091) (Part No: 8N3600-OE)
$23.07

Ford 8N Steering Wheel Dome Nut Washer
Steering Wheel Dome Nut Washer
- With beveled edge. For tractor models 8N, NAA, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681, 700, 740, 741, 771, 800, 801, 811, 820, 821, 840, 841, 850, 851, 860, 861, 871, 881, 900, 901, 941, 950, 951, 960, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, 2000 (4 cylinder), 2030, 2111, 2120, 2130. Replaces 356515S, 356515S36 (Part No: 356515S)
$5.24

Ford 8N Steering Wheel Nut, Chrome
Steering Wheel Nut, Chrome
- Nut, Steering Wheel ACORN style. 11/16 inch-20. CHROME PLATED. For Ford 4 Cylinder Tractor Models, 1947-1964. (Part No: 351114CC)
$15.59

Ford 8N Tie Rod Boot Assortment
Tie Rod Boot Assortment
- Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Part No: TIERODBOOTS)
$11.25



Ford 8N Power Steering Pump Pulley
Power Steering Pump Pulley
- This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Part No: ABC1417)
$44.46

Ford 8N Steering Wheel Spinner Assortment
Steering Wheel Spinner Assortment
- Complete wheel spinner assortment: includes 2 blue, 2 green, 3 red, 2 yellow and 3 black. (Part No: WSV125A)
$76.09

Ford 8N Steering Wheel Spinner, Bare Aluminum
Steering Wheel Spinner, Bare Aluminum
- Comes with mounting hardware. (Part No: R3275)
$7.13

Ford 8N Steering Wheel Spinner, Blue
Steering Wheel Spinner, Blue
- Comes with mounting hardware. (Part No: R3279)
$7.20

Ford 8N Steering Wheel Spinner, Green
Steering Wheel Spinner, Green
- Comes with mounting hardware. (Part No: R3278)
$7.20

Ford 8N Steering Wheel Spinner, Orange
Steering Wheel Spinner, Orange
- Comes with mounting hardware. (Part No: R6323)
$8.85

Ford 8N Steering Wheel Spinner, Red
Steering Wheel Spinner, Red
- Comes with mounting hardware. (Part No: R3277)
$8.03

Ford 8N Tie Rod Boot Assortment
Tie Rod Boot Assortment
- Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Part No: TIERODBOOTS)
$11.25

No
Picture
Wheelspinner-Ball Bearing
- Wheel Spinner, black knob, universal. WSV124B (Part No: R3276)
$7.64

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories]   [All 8N Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy