Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N Parts

Category: Engine Parts

[Categories]   [All 8N Parts]   [All Ford Models]  


Ford 8N Camshaft
Camshaft
- For press on gear. Fits 8N serial number 263843 and greater using SIDE Mount Distributor. (Part No: 8N6250)
$147.96

Ford 8N Camshaft Kit, Side Mount Distributor Engine
Camshaft Kit, Side Mount Distributor Engine
- This camshaft uses a bolt on style camshaft gear. This kit includes: NEW Camshaft with Distributor Gear and Lifters. For 8N with Side Mount Distributor (Part No: R0885K)
$265.65

Ford 8N Connecting Rod Nut
Connecting Rod Nut
- This is a Castle Style Nut for the Rod Cap on Ford tractors, 1939 to 1964. Replaces C9AZ6212B, 7HA6212, 7HA-6212. Eight used per tractor. Priced each. For models 9N, 8N, 2N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 4000 and 2000. (Part No: 7HA-6212)
$1.58

Ford 8N Connecting Rod, Reconditioned
Connecting Rod, Reconditioned
- Used on 120 cubic inch 4 cylinder engines from 1939 to 1952, this recondition connecting rod has new bushing and hardware. Used on Ford 9N, 2N and 8N tractors. Replaces rods with casting number 9N6200 and 9N6200B (Part No: 9N6200B)
$163.93

Ford 8N Crankshaft Cranking Rachet
Crankshaft Cranking Rachet
- The ratchet nut fits into the nose of the crankshaft. The hand crank fits into the end of the ratchet to turn the engine over. Replaces original part number 2N6319A1 (Part No: 2N6319A1)
$13.61

Ford 8N Crankshaft Pulley
Crankshaft Pulley
- This Crankshaft Pulley for models 8N, 9N, and 2N. Used with attaching a screw type hub for a front mounted hydraulic pump. Crankshaft mounting is 1.63 inch outside diameter and 1.18 inch inside diameter and has four 1/4 inch -20 threaded holes. Can be used as a regular crankshaft pulley without attaching a hub for a front mounted hydraulic pump. Replaces 2N6312. Used with part numbers 192161 and 194354. (Part No: 192160)
$38.25

Ford 8N Cylinder Head Bolt
Cylinder Head Bolt
- These bolts are 7/16 in diameter and 3 inches long. For 8N, 9N, 2N. 18 are used per tractor. Replaces 8N6065A (Part No: F8N6065A)
$8.01

Ford 8N Cylinder Head Studs
Cylinder Head Studs
- Studs are 7/16 in diameter and 3 inches long (threads: coarse 7/16-14 fine 7/16-20). For 8N, 9N, 2N. 18 are used per tractor. Priced each. (Part No: 8N6065A)
$5.46

Ford 8N Cylinder Head, New
Cylinder Head, New
- For 8N, 9N, 2N. All GAS 1939-1952. Cylinder Head. Replaces 8N6050, 8N6050A, 9N6050 (Part No: 8N6050A)
$209.14


NOTE
Distributors and Distributor Parts
- These are located in the Electrical System parts section.
NOTE

Ford 8N Flywheel Bolt Kit
Flywheel Bolt Kit
- From 1939 through 1964, these bolts were used by Ford to attach the Flywheel to the Crankshaft. These are exactly like the originals. (Part No: 350645S)
$25.71

Ford 8N Governor
Governor
- This Two arm type Governor Assembly with gasket. Will not replace 3 arm, ensure your old governor is 2 arm type. (Part No: 8N18204B)
$206.23

No
Picture
Governor Ball
- Fits 9N, 2N and 8N. 5/8 inch diameter ball. 4 used per tractor. Sold individually. Replaces 358081S. (Part No: 358081S)
$1.04

Ford 8N Governor Centrifugal Assembly
Governor Centrifugal Assembly
- Governor Internal Centrifugal Assembly. Fits 9N18200C or 8N18204B above, for 8N, 9N, 2N (1939 thru 1952). (Part No: 9N8N18179CA)
$146.00

Ford 8N Governor Compensating Spring
Governor Compensating Spring
- 4.95 inches in length. For model 8N. (Part No: 8N9827)
$3.95

Ford 8N Governor Driveshaft Ball Stop Shim
Governor Driveshaft Ball Stop Shim
- This Governor Driveshaft Ball Stop Shim is 0.010 inches thick. It is used on 9N, 2N and 8N Governors. Replaces 9N18241 (Part No: 9N18241)
$0.62

Ford 8N Governor Dust Seal
Governor Dust Seal
- Replacement Governor Dust Seal. For tractor models 8N, 9N, 2N. (Part No: 9N18183)
$7.66

Ford 8N Governor Housing
Governor Housing
- Governor Housing includes needle bearing, lip-type seal, bushing, and proofmeter drive cap with seal and nut. For 8N, 9N, 2N tractors built 1939 thru 1952. (Part No: 8N18085)
$156.27

Ford 8N Governor Lever Spring
Governor Lever Spring
- This Governor Lever Spring will fit tractor models 9N, 2N, 8N. (Part No: 9N18196)
$3.95

Ford 8N Governor Lower Race Assembly Bearing
Governor Lower Race Assembly Bearing
- For tractor models 8N, 9N, 2N. (Part No: 9N18186B)
$80.61

Ford 8N Governor Needle Bearing
Governor Needle Bearing
- For tractor models 8N, 9N, 2N. (Part No: 9N18182)
$9.06

Ford 8N Governor Plate
Governor Plate
- Plate, Governor Compensating Spring Anchor Plate. For tractor model 8N (1948-1952). (Part No: 8N9855)
$2.95

Ford 8N Governor Repair Kit, Basic
Governor Repair Kit, Basic
- For 8N, 9N, 2N. Kit contains gasket, lower race assembly, ball bearing, C-clip, 3 shims and 4 governor balls (5/8 inch). (Part No: BOK12502)
$94.53

Ford 8N Governor Repair Kit, Complete
Governor Repair Kit, Complete
- For 9N, 2N and 8N. Kit contains lower race assembly, shaft assembly (with or without proofmeter), upper face assembly, ball bearing assembly, shim, drive shaft ball stop, governor balls (5/8 inch), bushings, mounting gasket, dust seal, C-clip. (Part No: CAPN12502A)
$169.12

Ford 8N Governor Shaft
Governor Shaft
- Shaft Assembly, with or without proofmeter. For 8N, 9N, 2N. (Part No: 9N8N18187A)
$51.63

Ford 8N Governor Thrust Bearing
Governor Thrust Bearing
- This Governor Thrust Bearing is used on Ford 9N, 2N and 8N tractors, 1939-1952. It replaces original part number 9N18192 (Part No: 9N18192)
$5.91

Ford 8N Governor Upper Race Assembly
Governor Upper Race Assembly
- Upper Race Assembly. For 8N, 9N, 2N. Replaces original part number 9N18188B. (Part No: 9N18188B)
$41.43

Ford 8N Hand Starting Crank
Hand Starting Crank
- 8N, 9N, 2N Hand Starting Crank WITHOUT Spinner. Replaces 9N17040 and 2N178040A (Part No: 351010R31)
$34.50


NOTE
Piston Rings
- These are located in the ENGINE RINGS category.
NOTE

No
Picture
Pistons and Sleeves
- Pistons and Sleeves are located in the "Pistons and Sleeves category" Use your "BACK" key and select this category. (Part No: Various)
$107.00

Ford 8N Ring Gear, Flywheel
Ring Gear, Flywheel
- Fits all models Ford 1939 thru 1964; except Fordson Major and Dexta. This gear has 134 teeth. Inside diameter is 11.994 inches and outside diameter is 13.552 inches. (Part No: 9N6384)
$27.72

Ford 8N Timing Gear Cover
Timing Gear Cover
- This Timing Gear Cover is for an 8N with Side Mount Distributor. (Part No: 8N6019B)
$75.90

Ford 8N Timing Gear, Camshaft
Timing Gear, Camshaft
- This Bolt-on type Aluminum Camshafts fits 8N, 9N, 2N thru 1952. (Part No: 7RA6256)
$78.66

Ford 8N Timing Gear, Crankshaft
Timing Gear, Crankshaft
- This Crankshaft Timing Gear replaces original part numbers: 48-6306, 48-6306A, 486306A . For tractor models 8N, 9N, 2N. 22 teeth. (Part No: 486306A)
$44.49

Ford 8N Valve Guide
Valve Guide
- Single Valve Guide. For 8N, 9N, 2N. (Part No: 8BA6510B)
$6.08

Ford 8N Valve Guide Retainer
Valve Guide Retainer
- 120 CID 4 cylinder gas engines. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 retainer. 8 per engine. (Part No: 40-6512)
$0.95

Ford 8N Valve Key, Intake and Exhaust, Pack of 8
Valve Key, Intake and Exhaust, Pack of 8
- 120 CID 4 Cylinder Gas Engines. NOT for Free Rotating Exhaust Valves. Sixteen required per engine (2 packages of 8). Used in 120, 134 and 172 CID 4 Cylinder Gas Engines. Replaces 42026D, 70206880, 42026DGV, 500327, 70206880GV, 7HA6518GV, A30004, G11929, 10A6440, 206880, RP42026D, VT3234. (Part No: 7HA6518)
$2.40

Ford 8N Valve Key, Rotating Exhaust, Pack of 8
Valve Key, Rotating Exhaust, Pack of 8
- 120 CID 4 cylinder gas engine. Valve Key for FREE ROTATING Exhaust Valves. For tractor models 8N, 9N, 2N. (Part No: EAM6518A)
$10.44


NOTE
Valve Overhaul Kits
- Valve Overhaul Kits are located in the Engine Overhaul Kits Section (if available for this tractor).
NOTE

Ford 8N Valve Rotator Assembly
Valve Rotator Assembly
- Valve Rotator Kit for free-type valve 8N6505C. 1 used per valve. Kit contains 1 valve spring retainer (available in kit only), 1 rotator cap, 2 valve locks. For 8N, 9N, 2N with rotating valves. 4 used per engine. (Part No: 8N6534B)
$13.50

Ford 8N Valve Seat, Exhaust
Valve Seat, Exhaust
- These Valve Seats are the Nickel Series which are made for all new fuel blends. For tractor models 8N, 9N, 2N. 1.348 inch outside diameter. (Part No: 218-7405)
$6.75

Ford 8N Valve Seat, Intake
Valve Seat, Intake
- For tractor models 8N, 9N, 2N. (Part No: 218-7535)
$4.50

Ford 8N Valve Service Kit
Valve Service Kit
- Contains: 8 valve springs, 8 valve guides-solid type and 16 valve locks. For 8N, 9N, 2N. (Part No: VSKF928N)
$53.85

Ford 8N Valve Spring Retainer
Valve Spring Retainer
- These Valve Spring Retainers are for intake and exhaust for the 120 cubic inch, 4 cylinder gas engines. NOT for free type exhaust valve. Retainer for free type valve not furnished separately, order rotator kit 8N6534B. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 retainer. Replace 8RT6514B 8 per engine. (Part No: 8BA6514)
$2.07

Ford 8N Valve Spring with 1 Piece Guides
Valve Spring with 1 Piece Guides
- Sold individually, this valve spring is for the 120 CID 4 cylinder gas engine in the 9N, 2N and 8N. For use with Solid Valve Guides. (Part No: 8N6513)
$2.42

Ford 8N Valve Spring with Split Guides
Valve Spring with Split Guides
- Sold individually, these valve springs are for120 CID 4 cylinder gas engine. Valve spring for use with split guides. For 8N, 9N, 2N. (Part No: 2NC6513)
$1.50

Ford 8N Valve Stem Seal
Valve Stem Seal
- Valve Stem Seal for valve guide in 120 CID 4 cylinder gas engine. For 8N, 9N, 2N. Priced each. If you order 1, you will receive 1 seal. 4 used per tractor. (Part No: 8BA6571)
$.42

Ford 8N Valve Tappet
Valve Tappet
- ADJUSTABLE Tappet. Fits 8N, 9N, 2N. Note: Quantity 8 used in engine. Priced each. If you order 1, you will receive 1 tappet. (Part No: A0NN6500A)
$16.31

Ford 8N Valve Tappet Wrench Set
Valve Tappet Wrench Set
- For 8N, 9N, 2N. Valve Tappet Wrench (Set of 2). For adjustable tappets. Wrenches to adjust 91A tappets. Replaces 8WR1770, 8WR1770, T-6500-PR. Also used on Ford F-Series Trucks 1948-1953 and Ford Cars 1949-1951. (Part No: 8WR1770)
$9.95

Ford 8N Valve, Exhaust
Valve, Exhaust
- Exhaust Valve using Solid Guide. Uses 7HA6518 lock. For tractor models 8N, 9N, 2N. (Part No: 8N6505A)
$10.38

Ford 8N Valve, Exhaust, Free-rotating
Valve, Exhaust, Free-rotating
- Exhaust Valve for free-rotating type. Uses solid guide and EAM6518A lock. For tractor models 8N, 9N, 2N. (Part No: 8N6505C)
$13.20

Ford 8N Valve, Intake
Valve, Intake
- This Intake Valve uses the one piece guide. Uses valve lock part number 7HA6518. For 8N, 9N, 2N. (Part No: 8BA6507A)
$9.92

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Engine Parts

[Categories]   [All 8N Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy