Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 8N Parts

Category: Electrical System

[Categories]   [All 8N Parts]   [All Ford Models]  


Ford 8N 12 Volt Conversion Kit, Front Mount Distributor
12 Volt Conversion Kit, Front Mount Distributor
- 8N, 9N, 2N. Updates older 6-volt tractors to 12-volt charging system. For 9N, 2N, (early 8N 1948-1951) with Front Mount Distributor (distributor is right behind radiator), to serial number 263843. Kit includes rebuilt unicharge alternator with pulley and self exciting regulator, resistor, 12 Volt coil, wiring harness, top alternator bracket, alternator base bracket, alternator adjusting arm, belt, and instructions. Note, using the brackets in this kit may require trimming of the conduit your spark plug wires run through. Many tractors no longer have this conduit. If you would like avoid the possibility of have to make that minor modification, use 8NE10302-F top bracket (not included). Will not work if you have a magneto. (Part No: 8NE10300ALT-C)
$193.20

Ford 8N 12 Volt Conversion Kit, Side Mount Distributor
12 Volt Conversion Kit, Side Mount Distributor
- For Late 8N Tractors with side mount distributors(mounted at an angle near front of engine). Updates older 6-volt tractors to 12-volt charging system. Kit includes: Unicharge alternator w-pulley, Electrical resistor, (Resistor is used if you use your 6 volt coil - OR you can install a 12 volt coil (No coils included) and NOT use this resistor) wiring harness, top alternator bracket, base alternator bracket, alternator adjusting arm, Misc Bolts/Nuts/Instructions. (Part No: 8NL10300ALT)
$150.05


NOTE
Alternator
- Don't see the Alternator you need for your tractor? We have many alternators not listed on this website (for tractors 1953 & newer). Just call us at 800-853-2651.
NOTE

Ford 8N Alternator Adjustable Arm
Alternator Adjustable Arm
- Alternator Adjusting Arm. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10304)
$9.20

Ford 8N Alternator Base Bracket
Alternator Base Bracket
- Alternator Base Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10303)
$11.91

Ford 8N Alternator Base Bracket
Alternator Base Bracket
- Base Alternator Bracket. For 8N Late using Side Mount Distributors. (Part No: 8NL10303)
$10.74

Ford 8N Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. Can be used with our 8NE10305SE alternator. (Part No: 2348258)
$33.75

Ford 8N Alternator Pulley
Alternator Pulley
- For 8N, 9N, 2N, NAA, 600, 700, 800, 900. All using 12 Volt conversion kits with a Delco single wire alternator. Pulley, single groove 5/8 inches wide. The diameter varies from our different suppliers. This measures about 2 5/8 inches outside diameter, give or take about a 1/4 inch. This should be fine and within the adjustability of the Alternator Adjusting Arm. Replaces 98NAA5825. (Part No: AFD5035)
$10.74

Ford 8N Alternator Top Bracket
Alternator Top Bracket
- Alternator Top Mounting Bracket. For 8N, 9N, 2N - EARLY with Front Mount Distributor. (Part No: 8NE10302)
$9.20

Ford 8N Alternator Top Bracket
Alternator Top Bracket
- When Converting your 9N, 2N or early 8N tractors with front mount distributor, to an alternator, this bracket can be used instead of 8NE10302 to avoid the possibility of having trim the spark plug wire conduit. (Part No: 8NE10302-F)
$29.50

Ford 8N Alternator Top Bracket
Alternator Top Bracket
- Top Alternator Bracket. For 8N late with Side Mount Distributor. (Part No: 8NL10302)
$12.29

Ford 8N Alternator, 12 Volt
Alternator, 12 Volt
- 12 Volt, 63 Amp Alternator replacement for systems that have been previously modified to 12 volts. Does not include hardware. Simple 1-wire "self exciting" alternator has internal voltage regulator (easy to wire). 10SI Type Configuration. (Part No: 8NE10305SE)
$76.69

No
Picture
Base Alternator Bracket
- Base Alternator Bracket. For 8N, 9N, 2N. (Part No: 8NE10303)
$11.91

Ford 8N Battery Cable
Battery Cable
- For 8N, 9N, 2N. Ground Strap. 5.5 inches center to center. (Part No: D1NN14301H)
$14.18

Ford 8N Battery Cable
Battery Cable
- For 8N 1948-1952, Jubilee, (NAA, 600, 700, 800, 900. All 1953 and later. Ground Strap. 6 volt, 11 inches long. (Part No: FAE14301B)
$13.55

Ford 8N Battery Cable Cover
Battery Cable Cover
- Rubber cover, battery cable to starter solenoid. For tractors: 8N, Jubilee, NAA {1948-1953}. Replaces: 81826317, 86H14321A, C0NN14321A, C7NN14321A, S115407 (Part No: 86H14321A)
$11.95

Ford 8N Battery Hold Down
Battery Hold Down
- Bolt with nut. For tractor models 2000, 4000, 600, 620, 630, 640, 650, 660, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960, 8N. Sheet metal parts may or may not come painted as pictured (unless the description states the color). They often come with only a primer coat of paint. (Part No: NCA10728WN)
$3.95

Ford 8N Battery Hold Down Bolt
Battery Hold Down Bolt
- Bolt with nut. For tractor models 8N, NAA (1948-1954). (Part No: 8N10728WN)
$4.50

Ford 8N Battery to Starter Cable
Battery to Starter Cable
- For model 8N, 1939-1952. Starter to Battery Cable. 10.5 inches Long, 2 Gauge, 7/16 Diameter. (Part No: 8N14300B)
$14.63

Ford 8N Bearing, Generator Front
Bearing, Generator Front
- BEARING, BALL Bearing, Generator, Front End. For 3 Brush Generator. For early 8N, 9N, 2N. Measures .59 inches inside diameter and 1 3/8 outside diameter. Verify Measurements. (Part No: E27N10094B)
$7.01

Ford 8N Cigar Lighter Assembly
Cigar Lighter Assembly
- Complete with mounting bracket. Original accessory cigar element well, knob and wire. Ready to mount. For all models 1939-1954 (Part No: 8N9004601A)
$42.50

Ford 8N Clip
Clip
- Clip for 7/16 inch hole. Electric wiring to instrument panel support bracket 1948-1952. 1 required, main wiring assembly to instrument panel brace 1 required, wiring to hood top reinforcement 1950-1952. 3 required. For model 8N (1948-1952). (Part No: 51C14197)
$2.95

Ford 8N Clip
Clip
- Clip for 17/32 inch hole. Electrical wiring to instrument panel brace 1 required. For model 8N. (Part No: 8N14197)
$4.88

Ford 8N Coil - Six Volt
Coil - Six Volt
- This Ignition Coil is an exact replica of the original used in Ford Tractors, 1950 to 1964. The coil wire connection has a longer snout and will require some modifying of most wire sets. It replaces: 8BA12029, D0PF12029A, D3PF12029AA, E8T12029BA. (Part No: 8BA12029)
$36.71

Ford 8N Coil - Six Volt
Coil - Six Volt
- For tractor models 8N (1939-1950), 9N, 2N with Front Mount Distributor. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024)
$14.30

Ford 8N Coil - Six Volt with Script
Coil - Six Volt with Script
- The is an officially licensed Ford 6 Volt Coil, with raised Ford script. Replaces 9N12024. Order 9N12104 gasket set separately if mounting gasket is needed. (Part No: 9N12024S)
$36.71

Ford 8N Coil Wire Assembly
Coil Wire Assembly
- This Coil Wire Assembly is just like the original used on 8N serial number above 263842 and NAA, Jubilee. It replaces original part number 7RA14302. (Part No: 7RA14302)
$8.94

Ford 8N Coil, 12-Volt
Coil, 12-Volt
- For 8N, 9N, 2N (serial number up to 263843. Front Mount Distributor 12 Volts. Order 9N12104 gasket set separately if mounting gasket is needed. Replaces 9N12024-12V. (Part No: 12VOLTCOIL)
$27.03

Ford 8N Coil, Ignition 12V
Coil, Ignition 12V
- Ignition Coil. This coil is used with an External Resistor if needed. Replaces OEM part numbers Case/International Harvester - 353875R91, 395331R91, 106230C91, 385403R91, AT10399, 189673M92, 189673V2. (Part No: D8JL12029A)
$9.92

Ford 8N Condenser
Condenser
- Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: A0NN12300A)
$2.31

Ford 8N Condenser
Condenser
- For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901), (2000, 4000 ALL <1964). (Part No: FET12300A)
$3.15

Ford 8N Distributor
Distributor
- For 8N serial number 263844 and up - side mount. This distributor works with D8NN12171AA point set (included). Electronic ignition not available at this time. (Part No: 8N12127B-WCR)
$140.00

Ford 8N Distributor Assembly, Complete
Distributor Assembly, Complete
- For 9N, 2N, (8N all front mount serial number up to 263843). Includes: points, condenser and distributor cap. Does not include coil or mounting gaskets. (Part No: 9N12100)
$102.75

Ford 8N Distributor Breaker Plate
Distributor Breaker Plate
- Breaker Assembly, complete with points. For 8N, 9N, 2N. For Front Mount Distributor. Please note that suppliers have been replacing distributors, distributor base assemblies and breaker plates with after market parts for some time and the mounting screw that comes into the side of the distributor is slightly higher. This may require some modification if your mounting screw does not line-up. (Part No: 9N12150)
$29.06

Ford 8N Distributor Breaker Plate Retainer Clip
Distributor Breaker Plate Retainer Clip
- For tractor models 8N, 9N, 2N (Front Mounted Distributor). (Part No: 91A12146)
$2.16

Ford 8N Distributor Bushing, FRONT
Distributor Bushing, FRONT
- Front Distributor Bushing is for FRONT MOUNT DISTRIBUTOR only. For 9N, 2N, early 8N. (Part No: 9N12120)
$2.54

Ford 8N Distributor Bushing, REAR
Distributor Bushing, REAR
- Bushing, (rear), for Front Mount Distributor, 8N, 9N, 2N. (Part No: 18-12132)
$4.95

Ford 8N Distributor Cam and Weight Assembly
Distributor Cam and Weight Assembly
- Cam and Weight Assembly for 8N12127B-WCR original style Side Mount Distributor. For use on models 8N after serial number 263844, 1950 thru 1952. Note the direction of the weights in the picture. You may receive what is in the picture or you may receive the weights facing the opposite directions. They both work exactly the same. (Part No: 8N12176)
$62.10

Ford 8N Distributor Cap
Distributor Cap
- For tractor models 8N, 9N, 2N to serial number 263843 all with Front Mount Distributor. Distributor Cap. (Part No: 9N12106C)
$12.24

Ford 8N Distributor Cap Hold Down Clip
Distributor Cap Hold Down Clip
- This Distributor Cap Clip is used on Ford tractors 1950 to 1664 with Side Mount Distributor. Two used per tractor. Sold individually. Uses part number B12145 distributor clamp rivet, not included. Replaces 7RA12144. (Part No: 7RA12144)
$3.95

Ford 8N Distributor Cap Terminal Kit
Distributor Cap Terminal Kit
- Distributor Cap Terminal kit for 8N, 9N, 2N with Front Mount Distributor Electronic Ignition Conversion Kit. (Part No: 1247XTTERM)
$19.38

Ford 8N Distributor Cap with Pertronix Coil Modification
Distributor Cap with Pertronix Coil Modification
- Pertronix Distributor Cap for 8N, 9N, 2N with Front Mount Distributor THAT HAS BEEN CONVERTED TO AUTOMOTIVE STYLE KIT WITH A PERTRONIX 1247XT KIT. (Part No: 1247XTCAP)
$30.20

Ford 8N Distributor Cap, Clip Held
Distributor Cap, Clip Held
- Cap. Used ONLY on OLDER Tisco (Prestolite) replacement distributors (Through January 1987) for Late 8N with Side Mount Distributor. (Part No: IBK1009)
$26.39

Ford 8N Distributor Cap, Clip Held
Distributor Cap, Clip Held
- Fits Tractors: 8N serial number 263844 (side mount), Jubilee, NAA, 501, 600, 601, 700, 800, 801, 900, 901, 2000, 4000 series (4 cylinder). (Part No: NCA12106A)
$6.09

Ford 8N Distributor Clamp Rivet
Distributor Clamp Rivet
- This Distributor Clamp Rivet is used to secure part number 7RA12144 to the distributor. Used on Ford tractor models: 8N, 9N, 2N, NAA, Jubilee, 600, 601, 700, 701, 501, 800, 801, 900, 901, 1801, 2000 and 4000, 1950-1964. It replaces B12145, B-12145. (Part No: B12145)
$0.95

Ford 8N Distributor Clip Pair
Distributor Clip Pair
- For tractor models 8N, 9N, 2N (Early). Price is for two. Replaces 9N12144. (Part No: 9N12144)
$3.17

Ford 8N Distributor Coil Bail
Distributor Coil Bail
- For tractor models 8N, 9N, 2N with Front Mount Distributor. (Part No: 9N12137)
$2.07

Ford 8N Distributor Drive Gear
Distributor Drive Gear
- For tractor models 8N, 9N, 2N. Gear for Distributor Drive On Camshaft (Part No: 7RA6255)
$28.10

Ford 8N Distributor Drive Gear
Distributor Drive Gear
- For 8N with Side Mount Distributor, tractor serial number 263844 and above. (Part No: 7RA12390C)
$33.75

Ford 8N Distributor Dust Cap
Distributor Dust Cap
- Fits 4-cylinder gas engines on (1950-1964): 8N Side Mount Distributor, NAA, Jubilee, 600, 700, 800, 900, 2000, 4000. Includes FAA12114A Gasket. Replaces FAA12239A, 501308, 86588587 (Part No: FAA12239A)
$4.19

Ford 8N Distributor Gasket Kit
Distributor Gasket Kit
- For tractor models 8N, 9N, 2N prior to serial number 263844. Kit contains distributor breaker cover gasket, distributor base gasket, distributor coil base gasket, cap gasket. Replaces: 9N12104, 91A12114, 9N12140A, 9N12143, 9N12276B (Part No: 9N12104)
$4.49

No
Picture
Distributor Point Set
- Point set, Blue Streak premium quality. For tractor models 8N, 9N, 2N (Early). (Part No: A0NN12107ABS)
$24.15

Ford 8N Distributor Point Set, 4-Cylinder
Distributor Point Set, 4-Cylinder
- For FDN12127A and 311185 distributor used on NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: D8NN12171AA)
$3.81

Ford 8N Distributor Power Inlet Screw Kit
Distributor Power Inlet Screw Kit
- This kit contains 350032S screw, 7RA12234 insulator, 7RA12233 bushing, # 10 flat washer and 2 10-32 nuts. This kit is used in conjunction with 8N12209 Primary Conductor, not included. It is used on Ford 8N serial number above 263843, NAA, Jubilee, 600, 601, 501, 700, 701, 800, 801, 900, 901, 2000, 4000, 6000 and 1801 produced 1950-1964. (Part No: 350032-KIT)
$4.95

Ford 8N Distributor Primary Conductor
Distributor Primary Conductor
- Copper. Screw and insulator kit are available separately as part number 350032-KIT. Fits tractor models: Jubilee, NAA, NAB, 1801, 1811, 1821, 1841, 1881, 2000 4 cylinder, 2030, 2031, 2111, 2130, 2131, 4000 4 cylinder, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4140, 501, 600, 601, 700, 701, 800, 801, 900, 901. All 4 cylinder gas, LP thru 1964. 8N serial number 263844 and up 1950-1952 with side mounted distributor. Replaces: 8N12209. (Part No: 8N12209)
$5.40

No
Picture
Distributor Rotor
- Rotor. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for late 8N Side Mount Distributors. (Part No: IGP1016D)
$18.41

Ford 8N Distributor Rotor Clip
Distributor Rotor Clip
- For tractor models (8N serial number 263844 and up), NAA, 501, 600, 700, 800, 900, 1801, (2000, 4000 4 cylinder through 1964). All with Side Mount Distributor. (Part No: 8N12213)
$2.99

Ford 8N Distributor Rotor, Front Mount Distributor
Distributor Rotor, Front Mount Distributor
- Fits 8N, 9N, 2N with Front Mount Distributor. (Part No: B2NN12200A)
$3.84

Ford 8N Distributor Rotor, Side Mount Distributor
Distributor Rotor, Side Mount Distributor
- 4-Cylinder. Fits the following gas tractors up to 1964: 8N with Side Mount Distributor, NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000. (Part No: C0NN12200A)
$2.27

Ford 8N Distributor Shaft Assembly
Distributor Shaft Assembly
- Distributor Shaft Assembly. For use on models 8N after serial number 263844, 1950 thru 1952. Drilling is required for the pin holes to install the distributor gear and collar. (Part No: 8N12175)
$62.19

Ford 8N Distributor Shaft Bushing
Distributor Shaft Bushing
- This Distributor Shaft Bushing is used in Side Mount Distributors, 8N serial number after 263843. Replaces original part number 8N12120. (Part No: 8N12120)
$4.95

Ford 8N Distributor, Breaker Plate
Distributor, Breaker Plate
- 4 Cylinder. Breaker Plate with points and condenser. For NAA, NAB, Jubilee, 8N with Side Mount Distributor only, 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). (Part No: FAD12152A)
$42.35

Ford 8N Distributor, Cam and Weights Assembly
Distributor, Cam and Weights Assembly
- Distributor Shaft with Cam and Weights attached for 9N12100 Front Mounted Distributor. For use on Ford tractor models 9N, 2N, and 8N before serial number 263843, 1939 to 1950. (Part No: 9N12187)
$86.40

Ford 8N Electronic Ignition Conversion Kit - 6V Positive Ground
Electronic Ignition Conversion Kit - 6V Positive Ground
- Electronic Ignition Conversion Kit. For 8N, 9N, 2N with FRONT Mount Distributor only. For tractors with 6-volt POSITIVE ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. (Part No: 1247P6)
$132.38

Ford 8N Electronic Ignition Conversion Kit - 6V Positive Ground
Electronic Ignition Conversion Kit - 6V Positive Ground
- Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 6-volt positive ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1247XTP6)
$223.97

Ford 8N Electronic Ignition Conversion Kit -12V Negative Ground
Electronic Ignition Conversion Kit -12V Negative Ground
- Complete Electronic Ignition Conversion Kit by Pertronix to convert your tractor to an electronic automotive type coil system.. For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser, also includes 40, 000 volt coil, coil clamp, coil wire and distributor cap. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247XT)
$213.83

Ford 8N Electronic Ignition Conversion Kit, 12 volt negative ground
Electronic Ignition Conversion Kit, 12 volt negative ground
- Electronic Ignition Conversion Kit - For 8N, 9N, 2N with FRONT MOUNT Distributor only. For tractors with 12-volt negative ground only. This electronic module replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1247)
$122.20

Ford 8N Electronic Ignition Conversion Kit, 12V Negative Ground
Electronic Ignition Conversion Kit, 12V Negative Ground
- Pertronix Electronic Ignition kit for the following tractors using 4-cylinder gas engine: 8N (using side mount distributor), NAA, Jubilee, (501, 600, 620, 630, 640, 650, 660, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 800, 900, Series), 2000. And for the following tractors using 172 4-cylinder gas engine: 800, 900, 801, 901, 4000. This electronic module by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 12-volt negative ground only. (Part No: 1244A)
$106.22

Ford 8N Electronic Ignition Conversion Kit, 6V Positive Ground
Electronic Ignition Conversion Kit, 6V Positive Ground
- For 8N with side mount distributor only. This electronic module kit by Pertronix replaces your points and condenser. Never change points again! Easy installation, no complicated wiring, fits entirely inside distributor. Increases spark plug life and horsepower, improves fuel economy. For tractors with 6-volt positive ground only. (Part No: 1244AP6)
$117.19

Ford 8N Electronic Ignition Replacement Module
Electronic Ignition Replacement Module
- This is a replacement module for the 1247XT electronic ignition kit. Does not have the magnetic sleeve for the rotor shaft. (Part No: 1247XT0)
$76.58

Ford 8N Generator Repair Kit
Generator Repair Kit
- For 2 brush generators 8N10001, FAC10002A. On tractors 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 to 1964, 4000 to 1964, 6000 to 1964. (Part No: GRK401)
$14.06

Ford 8N Generator, 6 Volt
Generator, 6 Volt
- New Generator with Pulley. For 8N, 9N, 2N. Single terminal, 6 Volt, 2 brushes. (Part No: 8N10000)
$164.91

Ford 8N Ignition Kit With Rotor - 4 Cylinder
Ignition Kit With Rotor - 4 Cylinder
- Ignition Kit contains: points, rotor, condensor. For 8N (LATE - with side mounted distributor), And 4 cylinder Ford Tractors from 1950 to 1964 . Also for TISCO 8N12127-WCR distributor. Replaces ATK7FAR, CPN12000A, C0NN12200A (Part No: ATK7FAR)
$7.49

Ford 8N Key Switch
Key Switch
- For all Fords 1939 through 1964 except Dexta and Fordson Major with 3/4 inch hole. Keyed Ignition Switch comes with 2 Keys. (Part No: 8N3679C)
$7.46

Ford 8N Point Set
Point Set
- Point Set. Used ONLY on OLDER Tisco replacement distributors (Through January 1987) for Late 8N Side Mount Distributors. (Part No: IGS2224LB)
$6.75

Ford 8N Pulley Generator
Pulley Generator
- Fits 8N (Keyway). Shaft hole is approximately 0.67 inch (approximately 11/16 inch). Pulley outside diameter approximately 3-5/8 inches, inside diameter approximately 2 5/16 inches X 5/8 inches wide. (Part No: 8N10130A)
$7.05

Ford 8N Pulley, Generator
Pulley, Generator
- Pulley, Generator (threaded). For 8N, 9N, 2N. (Part No: 9N10130B)
$26.21

Ford 8N Resistor
Resistor
- For 8N, 9N, 2N, and 4 cylinder engines on 600 - 4000 tractors 1955-1964. Used in our 12 volt conversion kits. This resistor tests at .6 ohms under load through a distributor. (Part No: 8NE10306)
$3.29

Ford 8N Resistor Assembly
Resistor Assembly
- For tractor models 8N to serial number 263844. Resistor measures .6 ohms +/- .1 (Part No: A8NN12250A)
$16.49

Ford 8N Rubber Grommet
Rubber Grommet
- Rubber Grommet, starter switch wire {goes on lower left side of instrument panel}. Tractors: 8N, NAA {1948-1952}. (Part No: 11A14605)
$3.78

Ford 8N Spark Plug
Spark Plug
- For 8N, 9N, 2N, NAA, NAB, Jubilee, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL before 1965). SPARK PLUG. PRICE IS FOR 1. If you order one, you will receive one. If you need 3 or 4, you need to order 3 or 4. Replaces Autolite AL437, AL82, Bosch WR9FC and Champion H14Y and H18Y. (Part No: AL437)
$1.85

Ford 8N Spark Plug Wire Bracket
Spark Plug Wire Bracket
- For tractors: 8N {1950-1952}. (Part No: 8N12112B)
$4.95

Ford 8N Spark Plug Wire Bracket
Spark Plug Wire Bracket
- For tractor models 8N, 9N, 2N, (1939 to 1950). (Part No: 9N14564)
$4.95

Ford 8N Spark Plug Wire Grommet
Spark Plug Wire Grommet
- Distributor Spark Plug Wire Grommet. Holds all 4 plug wires together. Tractors: 8N (serial number 263843 and up 1950-1952). (Part No: 7RA12297)
$3.95

Ford 8N Spark Plug Wire Rubber Grommet
Spark Plug Wire Rubber Grommet
- This Grommet is used to hold the #3 and #4 plug wires at the #3 plug. Originally used on 8N after serial number 263843 It replaces original part number 7RA12271 (Part No: 7RA12271)
$1.95

Ford 8N Spark Plug Wire Set, Custom
Spark Plug Wire Set, Custom
- Premium Quality Wire Set for 8N with Side Mount Distributor. Zinc-coated plug terminals, modern low resistance core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 specifications. Made in the USA. (Part No: 8N12259)
$17.25

Ford 8N Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$13.86


NOTE
Starter
- Don't see the starter you need for your tractor? We probably have it! Just call us at 800-853-2651 with your make, model, engine cubic inches (CID) and number off your old starter and we will see if we can find it!
NOTE

Ford 8N Starter Boot
Starter Boot
- Rubber cover, starter control wire terminal {goes on wire to solenoid}. For tractors: 8N, Jubilee, NAA {1948-1954}. For 321, 339, 340, 501 (Part No: 8N11115)
$7.50

Ford 8N Starter Boot
Starter Boot
- Rubber cover, starter switch terminal cover. Tractors {1948-1958}. (Part No: 8N11113)
$3.95

Ford 8N Starter Copper Strap, Solenoid to Starter
Starter Copper Strap, Solenoid to Starter
- Fits 8N. (Part No: 8N11518)
$4.95

Ford 8N Starter Drive
Starter Drive
- New improved design Starter Drive, for 8N, 9N, 2N (1939 to 1952). (Part No: 52-11350C)
$20.01

Ford 8N Starter Post Kit
Starter Post Kit
- This kit replaces the wire post on Ford starters, 1939 to 1964. Replaces C7NF11102A, 1811107B, 86512984, 6810044. (Part No: A9AZ11102B)
$6.98

Ford 8N Starter Repair Kit
Starter Repair Kit
- For 8N, 9N, 2N. Starter Repair Kit contains all parts necessary for repair of starter part number 8N11001. (Part No: SRK401)
$13.62

Ford 8N Starter Solenoid, 12 Volt
Starter Solenoid, 12 Volt
- This Starter Solenoid (Relay Assembly)will work for 6 or 12 volt applications. It has three posts and a saddle mount. For 8N, 1948-1952. (Part No: 8N11450-12V)
$10.95

Ford 8N Starter Solenoid, 6 Volt
Starter Solenoid, 6 Volt
- This Starter Solenoid (Relay Assembly) for 6 volt Systems. Will also work on 12 volt systems, for a more robust solenoid, use 8N114500-12V It has three posts and a saddle mount. For 8N, 1948-1952. (Part No: 8N11450)
$7.13

Ford 8N Starter Switch
Starter Switch
- With mounting gasket. Fits 8N (1948-1952), all except Select-O-Matic tractors. Also NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000, all 1953-1964. Replaces 8N11550. (Part No: 8N11500WG)
$10.74

Ford 8N Starter, 6 Volt, Less Drive
Starter, 6 Volt, Less Drive
- Starter, less drive. For 8N, 9N, 2N, with 6 volt systems. Restoration quality. (Part No: 8N11001)
$102.58

Ford 8N Starter, 6 and 12 Volt, With Drive
Starter, 6 and 12 Volt, With Drive
- New Starter for 8N, 9N, 2N. 12 Volt. Complete starter includes starter drive. This new design performs great for 6 or 12 volts due to better internal parts than the original. (Part No: 8N1100R)
$153.66

Ford 8N Terminal Block
Terminal Block
- For tractor models 8N 1950-1952, NAA, (2000, 4000 up to 1964), 600, 800. (Part No: 8NNN14448A)
$7.65

Ford 8N Tune Kit
Tune Kit
- This Tune Kit is for tractor models 9N, 9N, 2N, and Early 8N, all with Front Mount Distributor. Tune Up Kit, Autolite. Includes: point set, condenser, rotor and (4) 437 Autolite Spark Plugs and gaskets. Verify correct spark plug size and type (Part No: 309786)
$17.34

Ford 8N Tune Kit, Basic
Tune Kit, Basic
- This Basic Tune Kit has points, condenser and rotor for Front Mount Distributor. For 9N, 2N and Early 8N. (Part No: ATK6FFR)
$9.24

Ford 8N Tune Kit, Basic
Tune Kit, Basic
- This Basic Ignition Tune Kit is for 4 cylinder gas tractor models NAA, NAB, Jubilee, 8N with side mount distributor only, and 134 and 172 gas engines used on: 501, 600, 601, 700, 701, 800, 801, 900, 901, (2000, 4000 ALL <1964). Tune up kit, Autolite (AL437). Kit contains: D8NN12171AA point set, FET12300A condenser, CONN12200A rotor and spark plugs. Verify correct spark plug size and type. (Part No: 309787)
$12.66

Ford 8N Voltage Regulator
Voltage Regulator
- For 8N - For Early Models with Front Mount Distributor, with generator. (Part No: 8N10505B)
$20.01

Ford 8N Voltage Regulator 6 Volt
Voltage Regulator 6 Volt
- This Voltage Regulator has 3 terminals and is for an 8N with Side Distributor with generator. (Part No: 8N10505C)
$18.47

Ford 8N Wiring Harness 12 Volt
Wiring Harness 12 Volt
- Wiring Harness for 2N, early 8N, and 9N that has been converted to 12 Volt. Does not include light wiring. There are many different ways to wire a 12 volt conversion and this is the wiring harness provided in our 12 volt conversions set. It may be different than how your 12 volt conversion was done if not done with our kit. (Part No: 8NE10301)
$21.56

Ford 8N Wiring Harness, 6 Volt
Wiring Harness, 6 Volt
- Has woven fabric casing. For 8N with Front Mounted Distributor and 2 wire generator, up to serial number 263843. Ignition Wiring Harness. (Part No: 8N14401B)
$20.37

Ford 8N Wiring Harness, 6 Volt
Wiring Harness, 6 Volt
- For 8N Side Mount Distributor, serial number 263843 and up. Ignition Wire Harness. Replaces 8N14401C. (Part No: 8N14401C)
$20.90



Ford 8N Alternator Base Bracket Kit - Universal
Alternator Base Bracket Kit - Universal
- Universal Base Bracket Mounting Kit. For converting from a generator to an alternator. Contains: brackets, bolts, washers, nuts and basic instructions. (Part No: 2348258)
$33.75

Ford 8N Alternator Conversion Plug
Alternator Conversion Plug
- Used to turn Delco SI Style 2-Wire plug alternators into self-exciting style. (Part No: ADR9209)
$13.67

Ford 8N Alternator Top Adjusting Bracket, Universal
Alternator Top Adjusting Bracket, Universal
- Universal Top Adjusting Bracket for Alternator or Generator is 7/8 inches wide, 1-1/2 inch offset, 8-1/4 inch from farthest end of slot to center of mounting hole, 3-3/4 inch slot length, 3/8 inch mounting hole. (Part No: 8NL10302)
$12.29

No
Picture
Alternator, 12 Volt
- Universal 63 Amp Delco Alternator. Single wire with built in regulator. Will fit most tractors pre 1980. (Part No: 8NE10305SE)
$76.69

Ford 8N Battery Hold Down
Battery Hold Down
- For 8N, 9N, 2N, 2000, 3000, 4000, and others. (Verify battery measurements). Center to center mounting holes 10 1/8 inch. For batteries 8 15/16 inches long and 6 13/16 inches wide. (Part No: NCA10718A)
$15.87

No
Picture
Battery Thermal Wrap
- 60 Watt, 28 inches long wrap to keep your battery warm. (Part No: BTW28)
$35.98

No
Picture
Battery Thermal Wrap
- 160 Watt, 36 inches long wrap to keep your battery warm. (Part No: BTW72)
$53.81

No
Picture
Coil
- This universal automotive style coil is 28, 000 volts for a 12 volt system, 2.9 ohms. Measures 6 inches long and 2 1/2 inches diameter. (Part No: 28010)
$31.47

Ford 8N Coil Bracket
Coil Bracket
- Universal Coil Bracket (Part No: R1940)
$3.89

Ford 8N Coil, 12 Volt with Resistance
Coil, 12 Volt with Resistance
- This is a universal 12 volt coil with internal resistance. It can be used with 12 volt conversions if you don't want to put a resistor in line. Replaces 100402A, 70143, Delco 1115043, AA4879R, AA4983R, AT10399, D2AF12029AA, 1115043, 161861A, 189673M1, 189673M92, 353875R91, 395331R91, 395331R92, 396330R91, 396330R92, 396547R91, 396547R92, 396547R93, 396547R93, 74515665, AV101417, D5TE12029AB, 100402A, 1100-0540, 1100-0544, 1115043, 1200-0541, 1400-0565, 1700-0544, 189673V92, 25270, 70143 (Part No: 189673M1)
$14.91

Ford 8N Coil, High Performance (Black), 12 Volt, Epoxy Filled
Coil, High Performance (Black), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40611)
$45.20

Ford 8N Coil, High Performance (Black), 12 Volt, Oil Filled
Coil, High Performance (Black), 12 Volt, Oil Filled
- Pertronix Flame Thrower heavy duty, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40511)
$39.00

Ford 8N Coil, High Performance (Black), 6 Volt, Epoxy Filled
Coil, High Performance (Black), 6 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Black, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms of resistance. (Part No: 40111)
$45.20

Ford 8N Coil, High Performance (Black), 6 Volt, Oil Filled
Coil, High Performance (Black), 6 Volt, Oil Filled
- Pertronix Flame Thrower high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Coil has 1.5 Ohms of resistance. (Part No: 40011)
$44.90

Ford 8N Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
Coil, High Performance (Chrome), 12 Volt, Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. (Part No: 40601)
$45.43

Ford 8N Coil, High Performance (Chrome), 12 Volt, Oil Filled
Coil, High Performance (Chrome), 12 Volt, Oil Filled
- 12-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 12-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 3.0 Ohms of resistance. (Part No: 40501)
$43.82

Ford 8N Coil, High Performance (Chrome), 6 Volt, Oil Filled
Coil, High Performance (Chrome), 6 Volt, Oil Filled
- 6-VOLT, Pertronix Flame Thrower Chrome, high performance coil is for all 6-volt systems. Delivers up to 40, 000 volts. Coil is for replacement of Vertically mounted coil. If yours is not Vertically mounted, use an epoxy filled coil. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Increase plug gap .007 larger than the tractor manufacturer's recommended spark plug gap. Fits existing brackets. Coil has 1.5 Ohms resistance. (Part No: 40001)
$43.82

Ford 8N Coil, Ultra High Performance (Black), Epoxy Filled
Coil, Ultra High Performance (Black), Epoxy Filled
- Epoxy filled coils are used in tractors where you have the coil mounted horizontally. They provide superior winding support for high vibration environments. Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. (Part No: 45111)
$49.90

Ford 8N Coil, Ultra High Performance (Black), Oil Filled
Coil, Ultra High Performance (Black), Oil Filled
- Pertronix Flame Thrower II Black, ultra high performance coil is for 12-volt systems using inchIgnitor IIinch electronic conversion kits or any 6 volt system. Delivers up to 45, 000 volts. Oil filled for better cooling and voltage insulation. Enables larger plug gap for greater fuel efficiency and more power. Fits existing brackets. Low 0.6 Ohm primary resistance. (Part No: 45011)
$42.92

Ford 8N Coil, Ultra High Performance (Chrome), Oil Filled
Coil, Ultra High Performance (Chrome), Oil Filled
- Flame-Thrower II coils feature a very low resistance which make them the ideal coil for Ignitor II ignition systems as well as many other high performance ignitions. Low resistance and improved turns ratio help to produce up to 45, 000 volts. This higher voltage enables you to run larger spark plug gaps for added power and better fuel economy. These coils are also compatible with most capacitive discharge boxes including our own Second Strike. 0.600 ohms Primary Resistance, 9.00K ohms Secondary Resistance. (Part No: 45001)
$44.44

No
Picture
Distributor Terminal Insulator Assembly, Delco
- Delco Distributor Terminal Insulator Assembly is for Square Shoulder (outside terminal). Note: As distributors can be changed over time, it is best to double check which style you require. This is only a guide of what was original. Fits distributor housings with 0.300 Inch diameter round hole with a keyway. If not sure, measure before ordering. (Part No: 1904376)
$16.88

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/4 inch reach. Replaces Champion N12YC. NOTE: Verify spark plug type before ordering. (Part No: AL65)
$3.12

No
Picture
Spark Plug
- Extended tip, 14mm thread, 3/8 inch reach. Replaces Champion J10Y, J11Y, J12Y, J13Y. NOTE: Verify spark plug type before ordering. (Part No: AL85)
$3.12

Ford 8N Spark Plug
Spark Plug
- Standard tip, 7/8 inch-18 thread, 5/8 inch reach. Replaces Champion W10, W14, W18. NOTE: Verify spark plug type before ordering. (Part No: AL3076)
$5.57

Ford 8N Spark Plug
Spark Plug
- Standard tip, 14mm thread, .472" reach. Replaces Champion L9J, L10, L86, L86C, L88A, L90. NOTE: Verify spark plug type before ordering. (Part No: AL425)
$2.85

Ford 8N Spark Plug Wire Set, 4 Cylinder, Univeral
Spark Plug Wire Set, 4 Cylinder, Univeral
- Universal Spark Plug Wire Set, 4 Cylinder, straight boot, cut to length. (Part No: S2097)
$13.40

Ford 8N Spark Plug Wire Set, 4 Cylinder, Universal
Spark Plug Wire Set, 4 Cylinder, Universal
- For use with high performance electronic ignition conversion kits. Kit has 90 degree sparkplug boots and straight distributor boots. 500 ohms per foot stainless steel wire wound (“Mag Wire”) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. (Part No: CPN12259EI)
$13.64

Ford 8N Spark Plug Wire Set, Universal - 6 Cyl.
Spark Plug Wire Set, Universal - 6 Cyl.
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, 500 ohms per foot stainless steel wire wound (“Mag Wire”) conductor. The lower resistance of 500 ohms per foot provides more potential energy to fire the spark plug under adverse conditions while preventing harmful RFI and EMI emissions. Also, the wire wound conductor never changes resistance. Longest Reach is 33 inches. This wire set is compatible with Electronic Ignition. (Part No: S66465)
$16.49

Ford 8N Spark Plug Wire Set, Universal 6 Cylinder
Spark Plug Wire Set, Universal 6 Cylinder
- Universal Spark Plug Wire Set, 6 Cylinder, 90 degree boot, cut to length, brass terminals, copper strand core. Longest Reach is 33 inches. (Part No: SWS260)
$19.14

Ford 8N Spark Plug Wire Set, Universal, 4 Cyl.
Spark Plug Wire Set, Universal, 4 Cyl.
- Universal Spark Plug Wire Set, 4 Price: 13.59 Cylinder, 90 degree boot, cut to length. Longest Reach is 33 inches. Solid brass distributor coils, Zinc-coated plug terminals, tin-coated copper core, boots constructed from EPDM rubber and dual-jacket insulation. Meets SAE J2031 Specifications. (Part No: CPN12259)
$13.86

Ford 8N Starter Solenoid, 12 Volt
Starter Solenoid, 12 Volt
- This is a 3 post, 12 volt Starter Solenoid. Can be used as a saddle mount or flat surface mount. May come in a metal or plastic casing. (Part No: DR1467)
$11.90

Ford 8N Switch, Push Button
Switch, Push Button
- This 2 terminal switch has many applications. It is a heavy duty momentary switch, push for on and release for off. It is rated for up to 35 volts. Uses two screw terminals. The mounting stem is 5/8 inch number 32 thread. It is 21/32 inch overall length. Check measurements before ordering if using as a universal part. Applications include ether switch, horn button, cold start, starter switch, and manifold heater switch. It replaces 22702, 240962, 242988, 245866, 245936, 70253322, 71191589, 72160068, VT507, 86900358, A30858, O9995AB, T18524, TG07803, TO18117, TO7803, 271179R91, 367678R91, 373611R91, 393209R91, AR46184, AR47373, AR47374, R39554, 189158M91, 767828M91, 105386A, 10A972, 1K7392C, UT2421, 1K7392A, 7A7392. (Part No: R7994)
$11.25

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Electrical System

[Categories]   [All 8N Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy