Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ford 1720 Parts

Category: Hydraulic System

[Categories]   [All 1720 Parts]   [All Ford Models]  


Ford 1720 Breakaway Clamp, Double
Breakaway Clamp, Double
- Double Break-Away Clamp. For tractor models 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 500, 5000, 5600, 600, 620, 630, 640, 650, 660, 6600, 700, 740, 750, 800, 820, 840, 850, 900, 950, 960. (Part No: 5006-4)
$22.05

Ford 1720 Hydraulic Pump
Hydraulic Pump
- Hydraulic Pump is used on 1120 Compact Tractor, 1215 Compact Tractor, 1220 Compact Tractor, 1320 Compact Tractor, 1520 Compact Tractor, 1620 Compact Tractor, 1715 Compact Tractor, 1720 Compact Tractor, 1920 Compact Tractor. Note: If equipped with SBA340450840 pump, some fittings and lines WILL NEED to be replaced with original lines and fittings. Replaces 83966846, SBA340450500 (Part No: SBA340450500)
$672.13

Ford 1720 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handle, single-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. (Part No: HV4010)
$201.80

Ford 1720 Hydraulic Valve Kit
Hydraulic Valve Kit
- Kit assembly, includes 1-spool valve with handle. For tractor models 1320, 1520, 1720, 1920, 2120. (Part No: HV4118)
$443.57

Ford 1720 Hydraulic Valve Kit
Hydraulic Valve Kit
- Kit assembly, includes 2-spool valve with handles For 1320, 1520, 1720, 1920, 2120. (Part No: HV4124)
$670.28

Ford 1720 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handles, two-spool, 2000 psi. Relief, tandem (4-way) spool, spring center to neutral. Fits Models: 500, 600, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 6600. (Part No: HV4020)
$439.32

No
Picture
Hydraulic hose Assembly
- Hose, 30 inches long. For tractor models 1320, 1520, 1720, 1920, 2120, 5900. (Part No: H31-SPL-30)
$40.41

Ford 1720 Hydraulic hose Assembly
Hydraulic hose Assembly
- Hose, hose assembly 1/4 inch NPT male solid. (Part No: HV4961)
$42.57

Ford 1720 Hydraulic hose Assembly
Hydraulic hose Assembly
- Hose, hose assembly 1/4 inch NPT male solid. (Part No: HV4962)
$42.33

Ford 1720 Hydraulic hose Assembly
Hydraulic hose Assembly
- Hose, hose assembly 1/4 inch NPT male solid. (Part No: HV4964)
$39.66

Ford 1720 Hydraulic top Link
Hydraulic top Link
- Hydraulic top link cylinder, 2 inch bore. (Part No: HTL2102)
$213.78

Ford 1720 Valve Box
Valve Box
- Valve box horizontal mount, with three-handle assembly. All steel (14 gauge) unit has built-in handle pivots complete with actuator links. One straight handle in center position flanked by two offset handles. Removable cover has edge protectors installed. Will accommodate HV4033 valve or equivalent. Mounts on top of flat fenders. (Part No: HV4985)
$94.68

Ford 1720 Valve Less Handle
Valve Less Handle
- Valve, 2-Spool, 2000 psi. Relief, Tandem (4-way) Spool, spring center to neutral, less handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Part No: HV4023)
$277.09

Ford 1720 Valve Less Handle
Valve Less Handle
- Valve, 3-Spool, 2000 psi. Relief, Tandem (4 way) Spool, Spring Center to Neutral, less Handles. Fits Models: 230, 231, 233, 234, 333, 334, 335, 340, 420, 445, 500, 515, 530, 532, 535, 545, 620, 630, 640, 650, 660, 740, 750, 820, 840, 850, 950, 960, 1320, 1520, 1700, 1710, 1720, 1900, 1910, 1920, 2000, 2110, 2120, 2600, 3000, 3600, 4000, 4600, 5000, 5600, 5900, 6600. (Part No: HV4033)
$696.49



Ford 1720 Coupler Flange
Coupler Flange
- FORD: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b (Part No: L36-6)
$47.46

Ford 1720 Coupler Flange
Coupler Flange
- Drive flange; 3/4" round bore with set screw 1/4" x 3/8". 1-15/16" spacing. For Morflex series 302. Replaces: L363, 191061, 1752219M91, L36-3 (Part No: 191061)
$20.82

Ford 1720 Coupler Hub Drive Kit
Coupler Hub Drive Kit
- Coupler Complete, Morflex Series 302. Contains center member, 2 drive flanges with set screws, and 4 bolts with lock nuts. The center member is 3-1/8 inch diameter, with four 1/4 inch holes and 1-15/16 inch spacing.The drive flange is 3/4 inch round bore with set screw 1/4 inch by 3/8 inch. (Part No: L601-14)
$103.25

Ford 1720 Coupler for Pump Shaft
Coupler for Pump Shaft
- The Hydraulic Pump Shaft Coupler is 1-1/2 Outside Diameter and 2-1/4 inches long. It 7/8 inch 13 splined inside. It replaces 1631413, 350-1631413, S340 (Part No: S340)
$23.34

Ford 1720 Cylinder Seal Kit, For 2 inch cylinders
Cylinder Seal Kit, For 2 inch cylinders
- For TISCO side and top link replacement cylinders. Seal Repair Kit for 2 inch cylinders. For cylinder numbers: HTL2101, HTL2102, HTL2103, HSL2201, HSL2202, HSL2203. Replaces HSK2001. (Part No: HSK2002)
$23.46

Ford 1720 Hub
Hub
- 7/8 inch, 13 spline threaded, 3-7/8 inch hole spacing. For 730 LOADER. (Part No: 291315)
$64.87

Ford 1720 Hydraulic Pump Drive Flange
Hydraulic Pump Drive Flange
- The bolt holes on the flange are 5/16 inches diameter and 2.250 center to center. This is used on a drive shaft that is 3/4 inches in diameter with a key way and set screw. This part replaces 1753730M1, 192199, 192199GV, L367GV, L36-7GV, 1753730M1GV, 1753730M91, L367. It is part of a 352 series Morflex Coupler. (Part No: 192199)
$21.92

Ford 1720 Hydraulic Pump Mounting Bracket
Hydraulic Pump Mounting Bracket
- This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8" diameter, 4-3/16" center to center. Also 2 foot mount holes 3/8" diameter, 5" center to center. Center pilot hole 3-1/4" diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Part No: 33020-1)
$147.00

Ford 1720 Hydraulic Pump, Front Mounted
Hydraulic Pump, Front Mounted
- This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE "A" Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Part No: 40P018LAJSA)
$428.82

Ford 1720 Hydraulic Valve Kit
Hydraulic Valve Kit
- Valve with handles, three-spool, 2000 p.s.i. Relief, all spools tandem (4-way) spring center to neutral. (Part No: HV4030)
$787.98

Ford 1720 LBP Coupler Center
LBP Coupler Center
- Center member. Center member. 3-5/8" O.D., four 5/16" holes, 2-1/4" bolt circle (L52-10) For tractor models 352. (Part No: 192169)
$56.68

Ford 1720 Moreflex Series 352 Coupler Drive Flange
Moreflex Series 352 Coupler Drive Flange
- Coupler for Hydraulic pump drive shaft. 13 spline for 7/8 inch diameter shaft. 5/16 inch diameter bolt holes, 2-1/4 inch on center. For 352. (Part No: L78-13)
$37.37

Ford 1720 Morflex Center Member
Morflex Center Member
- This is a 1-302 Morflex Center member. It measures 3-1/8" diameter, four 1/4" holes, 1-15/16" bolt circle. Replaces part numbers 893129, 191192, L5227, 1506097M91, 1086870M1, 191192LBP, 1752218M91, L52-27 (Part No: 191192LBP)
$36.66

Ford 1720 PTO Mounted Hydraulic Pump
PTO Mounted Hydraulic Pump
- For 540 RPM 6 spline 1 3/8 Shaft. 21 GPM, 2000 Max PSI. Mounts on shaft. Straight thru design allows nomal PTO use with extension shaft. Has two outlet ports. Inlet 1 5/16 - 12 ORB. Outlets 1 1/16 - 12 ORB. Recommednded hose sizes 1 1/4 inlet, 3/4 outlet. (Part No: HC-PTO-1A)
$953.75

Ford 1720 Top Link, Hydraulic
Top Link, Hydraulic
- FORD: Hydraulic top link cylinder. All ports 9/16 inch-18 O-ring boss with two adapters 9/16 inch-18 ORBM x 1/4 inch NPTM 90 degree swivel. 3 cylinder bore, 8 stroke length, 26 inch closed length, 12-7/16 inch barrel length, 1 inch rod end diameter, 1-3/4 inch rod end width, 1 inch diameter base end. (Part No: HTL3103)
$270.02

Ford 1720 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$12.75

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All 1720 Parts]   [All Ford Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2020 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy