Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ferguson TO-30 Parts

Category: Hydraulic System

[Categories]   [All TO30 Parts]   [All Ferguson Models]  


Ferguson TO30 Bushing
Bushing
- Bushing, Hydraulic Pump Base, for PTO Shaft. For tractors: TE20, TO20, TO30. Replaces OEM number 181095M1. (Part No: 9N649A)
$19.48

No
Picture
Bushing, Hydraulic Lift Shaft
- Size is: 2-3/8 inch outside diameter, 2 inch inside diameter, 3 inches long. For tractors: TE20, TO20, TO30. For MF135, MF150, MF35, MF50, TO35. (Part No: 180896M91)
$17.52

Ferguson TO30 Chamber Kit
Chamber Kit
- Repair kit for one Hydraulic Pump Chamber. Fits either left or right. CHAMBER KIT For TE20, TO20, TO30. (Part No: 9N621KIT)
$23.58

Ferguson TO30 Dipstick
Dipstick
- Hydraulic oil level indicator measures overall length of 7 3/8 inches and 5 inches from the stop down. It is used on tractors models: FE35, Super 90, TE20, TEA20, TO20, TO30, TO35, 135, 150, 165, 175, 203, 204, 230, 231, 235, 245, 253, 255, 265, 275, 360, 362, 383, 65, 85, 88, 202, 205, 302, 2135, 2500, 35, MF 50, MH 50. Replaces 180366M1, 193400M1, 514184M1. (Part No: 193400M1)
$8.69

Ferguson TO30 Draft Control Plunger
Draft Control Plunger
- For TE20, TEA20, TO20, TO30. Replaces OEM part number 890700M1. Fine Tread Style (Part No: 8N541B)
$37.08

Ferguson TO30 Draft Control Spring Plate
Draft Control Spring Plate
- This Draft Control Spring Plate is used on Ferguson TE20, TEA20, TO20, and TO30 tractors. It replaces original part numbers 180894M1 and TO527. If you need the plate with the pin, order 8N527. (Part No: 9N527)
$10.50

No
Picture
Draft Control Spring Plate, With Pin
- This plate has the pin. For models TE20, TEA20, TO20, TO30. Replaces 180894m1, TO527. If you need the plate without the pin, order number 9N527. (Part No: 8N527)
$14.50

Ferguson TO30 Front Hydraulic Pump Drive Hub
Front Hydraulic Pump Drive Hub
- Fits: TE20, TO20, TO30 (when using our 1750301M1 crankshaft pulley); Replaces: 500934, 290421. The spline diameter is 1 inch and 10 Splines, keyed shaft is 3/4 inch. Center to center on mounting bolts is 2-3/4 inches across with a 4 inch outside diameter, bolt holes are 7/16 inch. (Part No: 500934)
$31.50

Ferguson TO30 Gasket, Hydraulic Pump Drain
Gasket, Hydraulic Pump Drain
- Hydraulic Drain Plug Gasket 2 inches inside diameter and 2 5/8 inches outside. It is used on TE20, TEA20, TO20, TO30 (Hydraulic Pump Drain Plug Gasket) ]; Replaces: 181468M1, TO7011 (Part No: 8N7011)
$1.38

Ferguson TO30 Hydraulic Control Valve
Hydraulic Control Valve
- This Control Valve does NOT have a slot in the round end. Fits TE20, TEA20, TEF20, TO20, TO30. Hydraulic Valve Assembly includes housing, pintle, spring, pin clip, fully assembled. (Part No: 9N640)
$22.20

No
Picture
Hydraulic Control Valve
- With slotted end and with handle. For tractor models TO30, 50 Massey Harris. (Part No: 181163M1)
$17.23

Ferguson TO30 Hydraulic Cylinder-2 1\2 Inch
Hydraulic Cylinder-2 1/2 Inch
- For tractor models TE20, TEA20, TEF20, TO20, TO30. Also replaces OEM number 201183. (Part No: 829382M1)
$80.96

Ferguson TO30 Hydraulic Lift Control Quadrant
Hydraulic Lift Control Quadrant
- Hydraulic Lift Lever Control Friction Plate fits TE20, TEA20, TO20, TO30. It Replaces original part number 180887M1, 180887V1, 185148M91. Uses friction disk C5NN518B found on our web page. Bolt holes are 1/4 x 20. (Part No: 9N515)
$22.43

Ferguson TO30 Hydraulic Lift Cover Gasket Set
Hydraulic Lift Cover Gasket Set
- For TO20, TO30, TE20. Hydraulic Lift Cover Gasket Set includes 2 valve chamber gaskets, lift cover gasket, base pump gasket, 2 inspection cover gasket cylinder to center housing cover, 2 hydraulic lift cylinder housing gasket. (Part No: LCRK928)
$7.86

Ferguson TO30 Hydraulic Lift Piston Connecting Rod
Hydraulic Lift Piston Connecting Rod
- Hydraulic Lift Rod is used on FE35, TE20, TEA20, TO20, TO30, TO35, and 50 Tractors. It replaces original part numbers 180903M2, 887893M1. (Part No: 86563314)
$19.89

Ferguson TO30 Hydraulic Lift Rod
Hydraulic Lift Rod
- For tractor models TE20, TEA20, TEF20, TO20, TO30. (Part No: 180903M2)
$26.85

Ferguson TO30 Hydraulic Pump Cam Block
Hydraulic Pump Cam Block
- Cam Block, Hydraulic Pump. For tractors: TE20, TO20, TO30, TEA20, TEF20. Replaces 181066M1. (Part No: 9N617A)
$28.00

Ferguson TO30 Hydraulic Pump Overhaul Kit
Hydraulic Pump Overhaul Kit
- For TE20, TO20, TO30, TEA20, TEF20. Kit contains cam blocks, pistons, chamber repair kits, PTO shaft bushing, safety valve, and gaskets. (Part No: HPOK1)
$120.42

Ferguson TO30 Hydraulic Pump Piston
Hydraulic Pump Piston
- Piston, hydraulic pump. For tractors: TE20, TEA20, TEF20, TO20, TO30. Replaces 890675M1 (Part No: 9N615)
$24.00

Ferguson TO30 Hydraulic Pump Rebuild Kit, Comprehensive
Hydraulic Pump Rebuild Kit, Comprehensive
- For tractor models TE20, TO20, TO30. Kit contains 2 cam blocks, 2 pistons, 2 chamber repair kits, PTO shaft bushing, safety valve, 2 valve chambers, 4 copper washers, base gasket, sump pump gasket, 2 side gaskets, PTO shaft gasket, 2 side plate gaskets. (Part No: S.61725)
$316.43

Ferguson TO30 Hydraulic Pump Safety Valve
Hydraulic Pump Safety Valve
- For: TE20, TEA20, (TEF20, before serial number 330043), TO20, TO30. Relief Valve rated to 2000 PSI. **Note: The part you receive may look different than pictured, but will fit and work the same. Replaces 2174/207887, 207887, 2174, 181087M1, 181087M91, 181087V91 (Part No: 8N638)
$20.73

Ferguson TO30 Hydraulic Pump Valve Chamber
Hydraulic Pump Valve Chamber
- Right Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181074M91. Polished Steel Finish. (Part No: 9N621)
$84.18

Ferguson TO30 Hydraulic Pump Valve Chamber
Hydraulic Pump Valve Chamber
- Right Hand Valve Chamber, less valves. For TE20, TO20, TO30. Cast Iron. 9N621-C (Part No: 9N621)
$84.18

Ferguson TO30 Hydraulic Pump Valve Chamber
Hydraulic Pump Valve Chamber
- Left Hand Valve Chamber, less valves. For TE20, TO20, TO30. USE PART NUMBER 9N622. (Part No: 9N622-C)
$84.39

Ferguson TO30 Hydraulic Pump Valve Chamber
Hydraulic Pump Valve Chamber
- Left Hand Valve Chamber, less valves. For tractors: TE20, TO20, TO30. Also replaces 181076M91. (Part No: 9N622)
$84.39

Ferguson TO30 Hydraulic Pump Valve Chamber Assembly, RH
Hydraulic Pump Valve Chamber Assembly, RH
- Right Hand Valve Chamber with valves. For tractor models TE20, TO20, TO30. (Part No: 9N621-ASSY)
$84.39

Ferguson TO30 Hydraulic pump base to center housing Gasket
Hydraulic pump base to center housing Gasket
- Hydraulic pump base to center housing Gasket is used on Ferguson Tractor Models: TE20, TEA20, TED20, TEF20, TO20, TO30. Replaces 181065M1, 4082/181065M1, 4082 (Part No: 9N611)
$1.31

Ferguson TO30 Lift Arm
Lift Arm
- For tractor models TE20, TEA20, TO20, TO30, FE35, F40, TO35, 130, 135, 202, 203, 204, 205, 2135, 25, 302, 304, 35, 65. Lift arm for both right hand/left hand side. Lift arm has a 1.80 inch inside diameter and 37 spline hole. (Part No: 180910M1)
$65.30

Ferguson TO30 Lift Cylinder Housing Gasket
Lift Cylinder Housing Gasket
- For tractor models TE20, TEA20, TO20, TO30. Replaces 181059M1. (Part No: 9N553)
$.74

Ferguson TO30 Lift Cylinder Piston, 2 1\2 inch
Lift Cylinder Piston, 2 1/2 inch
- For TO20, TO30, TE20, TEA20, (FE35 above serial number 65684), 50 All with 2-1/2 inch diameter piston), TO35 serial number <179303 with 2-1/2 inch diameter piston. Hydraulic Lift Cylinder Piston. DOES NOT come with Piston Rings set which can be ordered as part number 9N675. (Part No: 9N530B)
$29.25

Ferguson TO30 Lift Piston
Lift Piston
- This is a single groove Hydraulic Lift Piston that measures 2-1/2 inches in diameter, groove is centered 1 1/4 inch from bottom of piston. O-Ring available as NAA533A and back up washer as NAA473A. For tractor models 202 Indust/Const, 35, 35X, 50 Loader, TE20, TEA20, TO20, TO30, TO35. Replaces 181983M1. (Part No: NAA530B)
$29.25

Ferguson TO30 Lift Shaft Bushing
Lift Shaft Bushing
- Bushing is 2.36 inch outside diameter, 1.97 inch inside diameter, 1.39 inches long. For tractors: TE20, TEA20, TEF20, TO20, TO30, FE35, F40, TO35, MF35, MF50, MF65, MF135, MF150, MF165. For shaft 184359M2, 4 required. If Shaft 897567M3 is used, it requires bushing 1870934M1 not supplied. (Part No: 181018M1)
$6.78

Ferguson TO30 Lift Yoke
Lift Yoke
- This Lift Yoke measures 5/8 inch x 24 thread. For tractor models TE20, TEA20, TEF20, TO20, TO30 and fits with 8N541B. Fine Thread Style. Replaces OEM 181055M1. (Part No: 9N546C)
$24.50

Ferguson TO30 Quadrant Stop Kit
Quadrant Stop Kit
- For tractor models TE20, TE35, TEA20, TO20, TO30, TO35, 35, 40, 50, 65, Massey Harris 50. Replaces: 825753M1. (Part No: 9N521)
$6.75

Ferguson TO30 Seat, Hydraulic Lift Draft Control Spring
Seat, Hydraulic Lift Draft Control Spring
- Hydraulic Lift Draft Control Spring Seat. Fits Ferguson TE20, TEA20, TO20, TO30. Replaces: 181077M1, 890530M1, TO624. (Part No: 2N624)
$6.50



Ferguson TO30 Clamp, Double Break-Away, Hydraulic
Clamp, Double Break-Away, Hydraulic
- For use with S20-4 and S40-4 Couplers. Quik-Cover Assembly HV4957 fits this Clamp. (Part No: S42-4)
$25.14

Ferguson TO30 Coupler Flange
Coupler Flange
- Optional drive flange for L601-9; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch spacing. Hydraulics: Drive flange; 5/8 inch round bore with set screw 1/4 inch x 3/8 inch # SSH4-6. 2-1/4 inch b-b. (Part No: L36-6)
$47.46

Ferguson TO30 Hydraulic Pump Mounting Bracket
Hydraulic Pump Mounting Bracket
- This Hydraulic Pump Mounting Bracket is used for front mounted hydraulic pumps often used with loaders. For use with SAE A 2 bolt flange type pumps. Has 2 tapped mount holes 3/8" diameter, 4-3/16" center to center. Also 2 foot mount holes 3/8" diameter, 5" center to center. Center pilot hole 3-1/4" diameter. Fits L827-10X-LB, 40P018LAJSA and 195453 pumps. May fit other pumps. Verify measurements before ordering. (Part No: 33020-1)
$147.00

Ferguson TO30 Hydraulic Pump, Front Mounted
Hydraulic Pump, Front Mounted
- This Hydraulic Pump is used with various loader configurations. 14 GPM and 2, 000 RPM. 3/4 inch round shaft with key way. Left hand Rotation. Inlet ORB 1-5/16 inch. Outlet ORB 1-1/16 inch. SAE "A" Mounting. Bolt holes are 3/8 inch, 4 3/16 inch center to center. Replaces 192504, 195453. (Part No: 40P018LAJSA)
$428.82

Ferguson TO30 Hydraulic Selector, isolator assembly
Hydraulic Selector, isolator assembly
- For tractors without individual external hydraulic systems. Three position spool, forward position allows one-way (push) for single acting cylinder. Center position allows operation of the 3-point arms and the rear position will feed power to a 4 way control valve for two way (push-pull) operation of double acting cylinder. Fits all MF tractors where 182373M1 lift cover is used. Replace MF cover plate, adds 2 I/O ports 3/8 inch NPT. (Part No: TS300)
$106.94

Ferguson TO30 Hydraulic Valve Manifold
Hydraulic Valve Manifold
- This 3 Spool Valve allows operator to use auxiliary hydraulics at the same time without valve switching. Some tractors may need slight modification on seat. Includes 2 elbows. Models from 1960 and later years. (Part No: 19833A92)
$712.04

Ferguson TO30 LBP Coupler Center
LBP Coupler Center
- This LBP Coupler Center Member measures (A) 3-5/8 inch diameter (B) four 5/16 inch holes, 2-1/4 inch spacing. Replaces 1753729M91. (Part No: 192169)
$48.58

Ferguson TO30 Universal Pressure Gauge, Hydraulic
Universal Pressure Gauge, Hydraulic
- 400 lb Gauge. Glycerin Filled. Stainless Steel Case 2-1/2 diameter. Nickel Silver movement accurate to within 2%. Dual range KPA-PSI. Plexiglas Crystal. 1/4 NPT male brass fitting. (Part No: GG400)
$10.62

Ferguson TO30 Valve
Valve
- Valve for TS3200M. Single spool, 4-way, 3-position, spring loaded to neutral. No relief valve, no power beyond option. In and out ports 3/4 inch, work ports 1/2 inch NPT. (Part No: TS200BA)
$221.02

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hydraulic System

[Categories]   [All TO30 Parts]   [All Ferguson Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy