Welcome! Please use the navigational links to explore our website.

Company Logo
View Cart
 

• Tractor Parts
• Engine Kits
• Carburetors
• Manuals
• DVDs
• Hats
• Books


• Contact Us
• Shipping Rates
• Return Policy
• Ordering Help
• Company Info
• Parts Warranty
• Forums


Ferguson TO-30 Parts

Category: Hitch / Drawbar

[Categories]   [All TO30 Parts]   [All Ferguson Models]  


Ferguson TO30 Clevis Pin
Clevis Pin
- The Clevis Pin is used to hold the drawbar in part number SDA2. Measure 7/8 inches diameter and 3 3/8 inches long without head. Replaces 07040200, NCA803B. (Part No: PT3)
$3.74

Ferguson TO30 Complete Stabilizer Kit
Complete Stabilizer Kit
- Fits TO20, TE20, TEA20, TO30, TO35, MF50. (Part No: S.42841)
$58.73

Ferguson TO30 Drawbar Check Chain Kit
Drawbar Check Chain Kit
- This Drawbar Check Chain Kit includes: right hand/left hand anchors, 2 eyelets, 2 chains, 4 clevis with pins, and hardware. For tractor models TE20, TEA20, TO20, TO30. (Part No: NCA596B)
$32.06

Ferguson TO30 Drawbar Kit, Swinging
Drawbar Kit, Swinging
- This Swinging Drawbar Assembly contains drawbar: 29.35 inches long, 2.00 inches wide, 1.00 inch thick. Rear drawbar hanger, drawbar clevis assembly and drawbar clevis pin. For tractor models TE20, (TEA20 late only), TEF20, TO20, TO30, TO35, FE35, 50. May come painted red, black or primer. (Part No: 49A34R)
$122.54

Ferguson TO30 Drawbar, Swinging
Drawbar, Swinging
- Drawbar is 29.375 inches in length, 2 inches wide, 1 inch thick, off-set. For tractor models 50, 35, 851, 860, TO20, TO30, TO35. (Part No: C0NN805F)
$51.24

Ferguson TO30 Eyelet Assembly, Check Chain
Eyelet Assembly, Check Chain
- This Check Chain Eyelet Assembly fits Several Ferguson, Massey Harris and Massey Ferguson Tractors. The Bolt length is 2 11/16 inches. Thread diameter is 1/2 inch. Eyelet is 1/4 inch diameter. Replaces 180856M9 (Part No: EC0N660A)
$4.43

Ferguson TO30 Hitch Eyelet Bushing
Hitch Eyelet Bushing
- Verify measurements: 7/16 inch x 5/8 inch x 1 1/2 inch. For tractor models TEA20, TE20, TO20, TO30, TO35, 35, 50. (Part No: 180859M1)
$3.00

Ferguson TO30 Leveling Box Assembly
Leveling Box Assembly
- This Right Hand Leveling Box Assembly uses 5/8 inch pins and opens center-to-center from 17.75 inches to 21.5 inches. Width of the fork is 9/16. Fits TO20, TO30, FE35, 35, 50 (up to serial number 518703), MH50. Replaces 182642M91, 182642M94. Center to center OPENS TO MAXIMUM 21.5 inches. (Part No: 8N577A)
$75.32

Ferguson TO30 Leveling Box Fork
Leveling Box Fork
- A=5/8 inch, B= 3/4 inch, C= 11/16 inch, D=14-3/16 inch. For tractors: TE20, TO20, TO30, TO35, FE35, F40, MF35, MF135, MF150, MF65 (used in standard right hand assembly with 10-1/2 inch shaft), also left hand on MF65. (Part No: 184358M1)
$34.89

Ferguson TO30 Leveling Box Fork
Leveling Box Fork
- A= 5/8 inch, B= 3/4 inch, C=1/2 inch, D=9-3/4 inch. For tractors: TE20, TEA20, TEF20, TO20, TO30, (TO35 when used with 14 inch shaft). (Part No: 890674M1)
$19.64

Ferguson TO30 Leveling Box Shaft
Leveling Box Shaft
- Shaft and pinion, leveling box, 10-1/2 inches long. For tractors: TE20, TO20, TO30, MF35, MF135 (used in standard right hand assembly with 14-1/2 inch yoke). For MF165, MF65. (Part No: 185220M1)
$18.23

Ferguson TO30 Leveling Rod, LH
Leveling Rod, LH
- Hole-to-hole length is approximately 20 inches. Fits TE20, TEA20, TEF20, TO20, TO30, FE35, TO35, F40. (Part No: 182544M92)
$44.48

Ferguson TO30 Lift Arm, Lower, Right or Left
Lift Arm, Lower, Right or Left
- Lift Arm for category 1. 32 inches in length to hole centers, and 7/8 inch holes in end sockets (swivel type). Replaces 180847M91, 180847M1 and 30543E91. For tractors: TE20, TO20, TO30, TO35, TEA20 right or left.180846M91 (Part No: 9N555B)
$48.31

Ferguson TO30 Low Link Pivot
Low Link Pivot
- Pivot Shaft for lower link. Threaded ends 5/8 inch NF and 5/8 inch NF, overall length 5-1/4 inches. For tractors: TO20, TO30, TO35, MF35, MF135, MF150 industrials: 2135, 3165, 202, 204. MF1130. Replaces 181229M2, 181229M1, 181229M4, 181229M5 (Part No: 181229M5)
$10.19

Ferguson TO30 Stabilizer Arm Red
Stabilizer Arm Red
- Stabilizer Arm for 3-point hitch, 31-1/2 inch hole spacing. For tractor models F40, TO20, TO30, TO35. Replaces 181778M1. (Part No: 230042R)
$17.87

Ferguson TO30 Stabilizer Arm, Red, HD
Stabilizer Arm, Red, HD
- Stabilizer arm for 3-point hitch, high alloy steel, 31-1/2 inch hole spacing. For tractor models F40, 50, TO20, TO30, TO35. 181778M1-XHD (Part No: 230042XHD)
$15.93

Ferguson TO30 Stabilizer Bar, Adjustable
Stabilizer Bar, Adjustable
- 28-1/2 inches to 35 inches, 7/8 inch hole in both ends. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. (Part No: S.00184)
$22.35

Ferguson TO30 Stabilizer Bracket-LH
Stabilizer Bracket-LH
- For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181776M91, 818662M94 (Part No: 181776M91)
$20.28

Ferguson TO30 Stabilizer Bracket-RH
Stabilizer Bracket-RH
- For tractor models TE20, TEA20, TED20, TEF20, TO20, TO30, TO35, FE35, F40, 135, 20 Industrial, 30 Industrial, 35, 50 Industrial. Replaces 181775M91, 646102M1, 818661M93, 818661M94 (Part No: 181775M91)
$18.89

Ferguson TO30 Stabilizer Kit, Heavy Duty
Stabilizer Kit, Heavy Duty
- For tractor models F40, TO20, TO30, TO35, 50 <1961. This is a complete set. It contains 181778M1 HD Arms and 49B50r brackets and is 31 3/8 inch center to center. Additional $15 shipping due to weight. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: 231253XHD)
$70.86

Ferguson TO30 Stabilizer Pin with nut & lockwasher
Stabilizer Pin with nut & lockwasher
- Category I. Length 2.625 inches, pin diameter 0.875 inches, thread 0.625 inches-18. Replaces Original Part Numbers 181777M1, 646101M1, 646101M2. (Part No: SBP75-WNL)
$2.03

Ferguson TO30 Stay Arm Red
Stay Arm Red
- Stay Arm, lower, 1/4 inch thick steel. For tractor models TE20, TO20, TO30. (Part No: DBSL)
$9.54

Ferguson TO30 Stay Arm Red
Stay Arm Red
- Stay Arm upper, 1/4 inch thick steel. For tractor models TE20, TO20, TO30. (Part No: DBSU)
$9.66

Ferguson TO30 Swinging Drawbar Hangar
Swinging Drawbar Hangar
- For tractor models 50, TO20, TO30, TO35. Rear Drawbar Hanger. Used in Drawbar Kit number 49A34R. (Part No: 49B71R)
$42.37

Ferguson TO30 Swinging Drawbar Hanger
Swinging Drawbar Hanger
- Drawbar Hanger for swinging drawbar. For MF50, TO20, TO30, TO35. SDA3 (Part No: NCA809A)
$29.96

Ferguson TO30 Top Link Rocker Bracket
Top Link Rocker Bracket
- This Top Link Rocker Bracket is used on Ferguson TO20, TE20 TEA20 and TO30 tractors. It replaces original part number 185273M91 (Part No: 185273M91)
$66.93



Ferguson TO30 Bracket Stabilizer
Bracket Stabilizer
- Bracket, used with telescoping stabilizer 539881M2TSK. (Part No: 514992M2)
$42.46

Ferguson TO30 Check Chain & Pin Kit
Check Chain & Pin Kit
- Includes 1 Chain and 2 Clevis with pins and cotters. For most early models, pre-1965, category 1. (Part No: CBPN598A)
$5.97

Ferguson TO30 Drawbar Lock
Drawbar Lock
- For CAT I drawbars only (drawbars that are 1 inch thick x 2-1/2 inch width) . Prevents drawbar from rotating. (Part No: 49A29)
$24.02

Ferguson TO30 Drawbar Red
Drawbar Red
- Drawbar, category I, 7/8 inch pins. 11 holes, 26 inch bar length. (Part No: 180485M1)
$42.41

Ferguson TO30 Drawbar, Universal Cat I, 20-1\2 Inch
Drawbar, Universal Cat I, 20-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-7/64 inches thick, (B) 2-3/8 inches wide, (C) 20-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 2-1/32 inches from body edge to center of first body hole, (F) 3-3/32 inch center to center between holes, (G) 7/8 inch end pin, (H) Five 25/32 inch holes. (Part No: S.49123)
$35.79

Ferguson TO30 Drawbar, Universal Cat I, 25-1\2 Inch
Drawbar, Universal Cat I, 25-1/2 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 25-1/2 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-29/64 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Seven 25/32 inch holes. (Part No: S5009)
$31.65

Ferguson TO30 Drawbar, Universal Cat I, 29-3\4 Inch
Drawbar, Universal Cat I, 29-3/4 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 29-3/4 inches center to center on lower link pins, (D) 1-15/16 inches from center of pin to edge of body, (E) 4-1/2 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Nine 25/32 inch holes. (Part No: S128196)
$37.37

Ferguson TO30 Drawbar, Universal Cat I, 30-1\8 Inch
Drawbar, Universal Cat I, 30-1/8 Inch
- Universal Category I Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-1/8 inches center to center on lower link pins, (D) 2-1/16 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 7/8 inch end pin, (H) Eleven 25/32 inch holes. (Part No: S125)
$42.30

Ferguson TO30 Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 2-3/8 inches from body edge to center of first body hole, (F) 2-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 25/32 inch holes. (Part No: S126)
$51.58

Ferguson TO30 Drawbar, Universal Cat II, 30-3\4 Inch
Drawbar, Universal Cat II, 30-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 30-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Eleven 3/4 inch holes. (Part No: S60155)
$58.02

Ferguson TO30 Drawbar, Universal Cat II, 36-1\4 Inch
Drawbar, Universal Cat II, 36-1/4 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 3-1/8 inches wide, (C) 36-1/4 inches center to center on lower link pins, (D) 2 inches from center of pin to edge of body, (E) 3-35/64 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1-19/64 inch holes. (Part No: S15134)
$78.68

Ferguson TO30 Drawbar, Universal Cat II, 36-29\32 Inch
Drawbar, Universal Cat II, 36-29/32 Inch
- Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 36-29/32 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-9/16 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Nine 1 inch holes. (Part No: S3394)
$68.91

Ferguson TO30 Drawbar, Universal Cat II, 36-3\4 Inch
Drawbar, Universal Cat II, 36-3/4 Inch
- Universal Category II Drawbar Measures: (A) 1-1/4 inches thick, (B) 3 inches wide, (C) 36-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 3-7/8 inches from body edge to center of first body hole, (F) 2 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Thirteen 3/4 inch holes. (Part No: S60156)
$60.21

Ferguson TO30 Drawbar, Universal Cat II, 39-3\8 Inch
Drawbar, Universal Cat II, 39-3/8 Inch
- Drawbar, Universal Cat II, 39-3/8 Inch - Universal Category II Drawbar Measures: (A) 1-3/16 inches thick, (B) 2-3/8 inches wide, (C) 39-3/8 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 7-7/8 inches from body edge to center of first body hole, (F) 3-1/8 inch center to center between holes, (G) 1-1/8 inch end pin, (H) Seven 1-1/8 inch holes. (Part No: S15081)
$57.88

Ferguson TO30 Drawbar, Universal Cat III, 42-3\4 Inch
Drawbar, Universal Cat III, 42-3/4 Inch
- Drawbar, Universal Cat III, 42-3/4 Inch - Universal Category III Drawbar Measures: (A) 1-49/64 inches thick, (B) 3-1/2 inches wide, (C) 42-3/4 inches center to center on lower link pins, (D) 2-3/8 inches from center of pin to edge of body, (E) 5-61/64 inches from body edge to center of first body hole, (F) 4-21/64 inch center to center between holes, (G) 1-27/64 inch end pin, (H) Seven 1-1/4 inch holes. (Part No: S29139)
$157.53

Ferguson TO30 HAIR PIN ASSORTMENT
HAIR PIN ASSORTMENT
- 15-piece assortment. Includes four(4) of HP-3 (wire diameter 3/16 inch, length 3.75 inch), four(4) of HP-4 (wire diameter 5/32 inch, length 2 15/16 inches), four(4) of HP-5 (wire diameter 1/8 inch, length 2 9/16 inches), and three(3) of HP-6 (wire diameter 3/32 inch, length 1 5/8 inches). (Part No: HPA15X)
$7.04

Ferguson TO30 HITCH BALL 10000LB 2-5\16
HITCH BALL 10000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-1/4 inch STUD THREAD, 2-1/2 inch STUD LENGTH, 10000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516114)
$23.85

Ferguson TO30 HITCH BALL 15000LB 2-5\16
HITCH BALL 15000LB 2-5/16
- 2-5/16 inch BALL SIZE, 1-3/8 inch STUD THREAD, 2-5/8 inch STUD LENGTH, 15, 000 LB MAX LOAD CAPACITY, THREE CHROME HITCH BALL CLASS. (Part No: CHB2516138_)
$25.04

Ferguson TO30 HITCH BALL 2000LB
HITCH BALL 2000LB
- 1-7/8 BALL SIZE, 3/4 STUD THREAD, 1-3/4 STUD LENGTH, 2000 LB MAX LOAD CAPACIRY, ONE CHROME HITCH BALL CLASS. (Part No: CHB17834)
$13.37

Ferguson TO30 HITCH BALL 3500LB
HITCH BALL 3500LB
- Hitch ball. 2 inch ball size, 3/4 inch stud thread, 1-7/8 inch stud length, 3500 lb. max load capacity, one/two chrome hitch ball class. (Part No: CHB234)
$9.74

Ferguson TO30 HITCH BALL 5000LB
HITCH BALL 5000LB
- Hitch ball. 2 inch ball size, 1 inch stud thread, 2-1/8 inch stud length, 5000 lb. max load capacity, two chrome hitch ball class. (Part No: CHB21)
$10.83

Ferguson TO30 HITCH BALL 5000LB 2-5\16
HITCH BALL 5000LB 2-5/16
- Hitch Ball, 2-5/16 inch ball size, 1 inch stud thread, 2 inch stud length, 5000 lb. max load capacity, three chrome hitch ball class. (Part No: CHB25161)
$15.39

Ferguson TO30 LINCH PIN, 10 Pack
LINCH PIN, 10 Pack
- Package of 10 linch pins. Pin diameter 5/16 inch, useable length 1 1/4 inch, Ring diameter 1 5/8 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP516)
$3.30

No
Picture
Level Box Assembly
- Leveling Box Assembly, standard right hand, category I, 20-1/2" closed, 26" open. Contains fork, shaft, pinion (185220M1-10-1/2"), housing, gear, bearing, handle & hardware. Replaces 677061, 1884760M94. Services all catergory I standard models. (Part No: HLBMF61)
$105.61

Ferguson TO30 Lift Arm Bushing
Lift Arm Bushing
- This Bushing is for using Category I Implements with Category II Lower Lift Arms. It has a 7/8 Inside Diameter, and 1-1/8 Outside Diameter and is 1-3/4 Inches long. Replaces B500192, 87299215, 87760407, EC0NG992AA, 150-821, BUSH04, 22BCO006, 477RB, BO821, 2430351, B821, B2008, 351, 00351, C7NNG992A, 81819374 (Part No: BUSH04)
$0.92

Ferguson TO30 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Package of 10 linch pins, 7/16 inch diameter pin x 1-3/4 inch usable length, 1-5/8 inch diameter ring. Cold Forged. Enter 1 for package of 10. (Part No: DKLP91)
$2.55

Ferguson TO30 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Pin diameter 1/4 inch, useable length 1 1/4 inch. Cold Forged. Enter 1 for package of 10. (Part No: DKP14)
$2.55

Ferguson TO30 Linch Pins, Pack of 10
Linch Pins, Pack of 10
- Linch Pins. 3/16 inch outside diameter pin x 1-1/4 inches Long. ***Enter 1 for package of 10*** (Part No: DKP316)
$1.95

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 490mm (19 15/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches). Verify that the measurements will meet the requirements of your application. (Part No: 159332)
$29.87

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 21.5 Inches Center to Center (A), Thickness: 5/8 inches, Width 2 9/16 inches, 7 1/4 Inches from center of ball joint for first hole (B), 9 1/4 inches from center of ball to second hole (C). Verify that the measurements will meet the requirements of your application. (Part No: 159324)
$56.20

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 595mm (23-7/16 inches), Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 13-3/4 inches, 12 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Part No: 159326)
$45.54

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 645mm (25 13/32 inches) , Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 14-3/4 inches, 13 inches and 8-1/2 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Part No: 159328)
$43.22

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 700mm (27 9/16 inches) , Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), Three holes located 16-1/4 inches, 13 inches and 6-1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Part No: 159330)
$50.61

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 750mm (29 1/2 inches) , Thickness: 16mm (5/8 inches), Width: 65mm (2 9/16 inches), One hole located 6 1/4 inches from center of ball. Verify that the measurements will meet the requirements of your application. (Part No: 159322)
$42.42

Ferguson TO30 Lower Lift Arm, RH or LH, CAT I
Lower Lift Arm, RH or LH, CAT I
- This Lower Lift Arm is a universal part. It is not designated to fit any specific model. Order by size. If the measurements are not exactly what you are replacing, consider ordering a matching pair. Measures; Length: 32 inches center to center , Thickness: 13/16 inches, Width: 1-13/16 inches, Holes are located at 15-1/2, 13 and 7-1/4 inches from ball center. 10 degree bend on each end. Verify that the measurements will meet the requirements of your application. Also correct of original equipment on Ford 2100 Compact Tractor. Replaces SBA370100034, SBA370100035 (Part No: SBA370100034)
$184.16

Ferguson TO30 Quick Hitch, Category I
Quick Hitch, Category I
- Comes assembled complete with hardware. Easier hookup, spring loaded locking device. Adjustable top link ball bracket. Includes 7/8 inch mounting pins and adapter bushings, 27-1/4 inches width, 3-1/2 inch x 3-1/2 inch beam. This is ONLY for tractors that have, a three point hitch already installed. An additional shipping charge of $60 will apply due to the weight of this item. IF ORDERING ON-LINE, THIS ADDITIONAL CHARGE WILL BE ADDED TO YOUR ORDER AFTER YOUR RECEIPT IS PRINTED. (Part No: HF141101)
$247.02

No
Picture
Stabilizer Arm
- Stabilizer arm. HEAVY DUTY, 3-point hitch, high alloy steel measures C to C 33.125 inches, Holes are 7/8 inches diameter, overall length 34.94 inches, thickness .375 inches, width 1.750 inches. Additional $5.00 due to size/weight for shipping. (Part No: 190582M1-XHD)
$16.14

Ferguson TO30 Stabilizer Assembly
Stabilizer Assembly
- This Stabilizer Assembly measures 14 inches minimum to 17.5 max. It has 7/8 inch pin holes and 12 degree bend on the link side. This part is sold a a universal part. Verify measurements before ordering. (Part No: 343437X1)
$17.99

Ferguson TO30 Stabilizer Chain
Stabilizer Chain
- This Stabilizer Chain is sold as a universal part. Verify measurements before ordering. It is Adjustable 11.75 inches to 13.5 inches with a 3.5 inch body. 7/16 inch Pin Diameter. (Part No: 159350)
$22.11

Ferguson TO30 Stabilizer Link
Stabilizer Link
- This Stabilizer Link is used on Compact Tractors. It adjusts from 15.5 inches to 19.5 inches. The Link Side is 0.79 inches. The Eyelet Side is 0.90 inches. This part is sold as a universal part. Verify measurements before ordering. (Part No: VPL3232)
$29.67

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 1-1, 17-1/4 inch length of center tube. Verify size before ordering. Replaces 1870075M9. (Part No: 184134M91)
$67.32

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 1-1, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 184078M91, 1869954M91. (Part No: 1690177M91)
$59.08

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 1-1, 21-1/2 inch length of center tube. Verify size before ordering. (Part No: 184361M91)
$68.86

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 1-2, 18-3/4 inch length of center tube. Verify size before ordering. Replaces 3597172M91, 894376M1, 894376M91. (Part No: 194376M91)
$68.70

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 1-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 894377M91, 894 377M91, 894377M1 (Part No: 894377M1)
$62.24

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 2-2, 18-3/4 inch Length of center tube. (Part No: 893438M91)
$59.27

Ferguson TO30 Top Link Assembly, OEM Style
Top Link Assembly, OEM Style
- Category 2-2, 21-1/2 inch length of center tube. Verify size before ordering. Replaces 3147681M91, 893439M91. (Part No: 1887285M91)
$52.44

Ferguson TO30 Top Link, Cat I
Top Link, Cat I
- Top link, category I only, 16 inch body, 3/4 inch category I ball joints. Adjusts 20-1/2 inches to 29 inches overall. Dichromate plated center body. (Part No: 30533E91)
$20.42

Ferguson TO30 Top Link, Cat I and Cat II
Top Link, Cat I and Cat II
- Top link, 16 inch body combination Category II tractor and Category I implement ends, Adjust 19-1/2 inches to 29-1/2 inches overall. May or may NOT come painted red. (Part No: JSA1200R)
$34.85

Ferguson TO30 Top Link, Cat I, Red
Top Link, Cat I, Red
- Top link, 24 inch body, 3/4 inch category I ball joints. Adjusts 29 inches to 39 inches overall. Painted red. (Part No: JSA1024R)
$35.13

Ferguson TO30 Top Link, Cat II, Red
Top Link, Cat II, Red
- Top link, 20 inch body, 1 inch category II ball joints. Adjusts 25 inches to 37 inches. (Part No: 30108E91)
$33.36

Ferguson TO30 Top Link, Cat II, Red
Top Link, Cat II, Red
- Top link, 24 inch body, 1 inch Category II ball joints. Adjusts 29 inches to 41 inches. Painted red. (Part No: JSA2024R)
$49.11

Ferguson TO30 Top Link, Hydraulic
Top Link, Hydraulic
- Category I (3/4 inch), 18.5" inches to 26.0 inches length, 2.00 inch cylinder bore, 3/4 inch UNF port size. (Part No: B8106)
$211.00

Ferguson TO30 Universal Drawbar Lock
Universal Drawbar Lock
- For Cat. 1 drawbars up to 1 1/2 inch thick and 3 inches wide. Prevents drawbar from rotating. (Part No: DBL2)
$21.81

Ferguson TO30 Universal Stabilizer Chain Kit
Universal Stabilizer Chain Kit
- Chain stabilizers, turnbuckle and chain links adapt to any size 3-point hitch, usually used on larger tractors. VERIFY MEASUREMENTS. CLICK ON PICTURE FOR MEASUREMENTS. Move clevis up or down chain links; use turnbuckle for final adjustment. Packed and sold in pairs, less brackets. (Part No: SK102CH)
$49.47

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Hitch / Drawbar

[Categories]   [All TO30 Parts]   [All Ferguson Models]  







PayPal


Order Toll Free
(800) 853-2651
(Mon-Fri)


Order online
anytime!



  

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

Copyright © 1997-2019 Yesterday's Tractor Co.
Antique Tractor Headquarters
All Rights Reserved

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy