FREE SHIPPING on orders above $249.99! Details

• Tractor Parts

• Engine Kits

• Carburetors

• Salvage

• Manuals

• DVDs

• Hats

• Contact Us

• Shipping Rates

• Return Policy

• Ordering Help

• Company Info

• Parts Warranty

• Forums

Ferguson TO-35 Parts

Category: Steering

[Categories] [All TO35 Parts] [All Ferguson Models]

Axle Bushing - Front pivot support bushing. For tractors: TE20, TO20, TO30, TO35. 1-15/16 inch outside diameter, 1-25/32 inch inside diameter, 1-1/2 inches long. Replaces 180344M1 (Item #: 110832, Ref: 2N3039) $8.10

Axle Bushing, Flanged - Front pivot support bushing with swept back axle. 2.075 inch outside diameter, 1.750 inch, .820 inches long. For tractor models TE20, TO20, TO30, TO35, MF35, MF135, MF235, 20, 2135. Length of bearing may vary but will fit application if over .790 inches. (Item #: 114715, Ref: 182850M1) $7.20

Axle Pin Bushing - Long variation of 182850M1. For the same application but length is 1.482 inches. For: TE20, TO20, TO30, TO35, MF35, MF135, MF235 industrial: 20, 2135. 2.075 inch outside diameter, 1.750 inch, 1.482 inches long. (Item #: 184791, Ref: 182850M1-L) $6.70

Axle, Swept Front with Bushing - For Massey Ferguson: Industrial 20, 2135, FE35, TE20, TEA20, TEF20, TO20, TO30 TO35, 135, 230, 235, 35. Swept Front Axle with Bushing. (Item #: 173497, Ref: 183219M91) $165.00

Drag Link Dust Cover - Rear Tie Rod Boot with leather insert. Fits tractor models TEA20, TO20, TO30, TO35, MF35. Replaces: TO3324. (Item #: 178150, Ref: 9N3324OE) $16.00

Front Axle Pin - Solid Center - For Massey Ferguson tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 35X, 135, 135 (s/n 9A86902-earlier), 148 (s/n 604669-earlier), 2135, Replaces Massey Ferguson OEM number 183221M1, 193746M1, Diameter: 1.75", Length: 5.50", (Item #: 155652) $29.90

Gasket, Steering Box Mounting - For tractor models F40, FE35, TO35, 1080, 1085, 135, 150, 165, 165 UK, 175, 175 UK, 178, 180, 20, 20C, 2135, 230, 231, 235, 245, 255, 261, 265, 282, 285, 30, 30B, 31, 40B, 50A, 50C, 50D, 35, 35 UK, 40, 50, MH50. Replaces 520307M1, 5230307M1, 180511M1, 180511M2, 180511M92 (Item #: 168134, Ref: 180511M2) $4.30

Jam Nut, Left Hand Thread - Used with 193733M91, this Jam Nut has .687 inch diameter 18 left hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193068M1 (Item #: 105111, Ref: 193068M1) $11.10

Jam Nut, Right Hand Thread - Used with 180507M91 or 180381M91, this Jam Nut has .687 inch diameter 18 right hand thread. The hex diameter is 1-1/16 inches. Used on Massey Ferguson 20 Turf, 2135 Turf, TO35, 135 Deluxe / Special, 230 below serial number 9A349239 with Swept Back Axle, 235 with standard Swept Back Axle, 35. Some of these models may have clamping type tie rod tubes, where this nut is not used. Replaces Massey Ferguson part number 193067M1 (Item #: 105112, Ref: 193067M1) $9.20

Pivot Pin - Pivot Pin for swept back axles. VERIFY MEASUREMENTS. 1-3/4 inch outside diameter, 5 1/2 inches long, 1 inch bolt hole (which adequately replaces a 7/8) and 1 inch diameter crank hole. Will fit shorter applications. Fits TO20, TO30, TO35, 35, 135 prior to serial number 9A86902; Industrials: 20 prior to serial number 9A86902; 2135 Turf and narrow. Use bolt part number 181953M1 Replaces 193746M1. (Item #: 128512, Ref: 183221M1) $34.60

Pivot Pin Retaining Bolt - This Pivot Pin Retaining Bolt is used with 193746M1 Axle Pivot Pin. It has a 15/16 inch shoulder diameter. Thread size�5/8 inch X 1 7/8 inch NF. Replaces 181953M1, 181953M2. (Item #: 154781, Ref: 181953M2) $6.10

Planetary Selector, Used - For Massey Ferguson tractor models F40, TO35, 35, 35X, 50, 135, 150, 165, 175, 180, 230, 231, 235, 240, 240P, 241S, 245, 250, 253, 255, 265, 270, 275, 282, 283, 285, 290, 298, 360, 362, 375, 383, 390, 390T, 393, 398, 431, 451, 471, 481, 491, 492, 543, 583, 596, 1080, 1085, 2625, 2650, 2660, 2670, 2680, 4225, 4233, 4235, 4240, 4243, 4245, 4253, 4255, 4263, 4265, 4345, 4355, Compatible with Massey Ferguson Construction and industrial models 11, 20, 20C, 20D, 20F, 30, 30B, 30D, 30E, 31, 40, 40B, 40E, 50A, 50C, 50D, 50E, 50H, 60, 202, 203, 204, 205, 302, 304, 356, 2135, 2200, 3165, Replaces Massey Ferguson OEM number 180446M1, For a new version of this item use Item #: 173169, Used items are not always in stock. If we are unable to ship this part we will contact you within one business day., (Item #: 460974) $8.01

Power Steering Cylinder Kit - Includes: cylinder housing, piston, plate, adapter, rack, pin power steering rack, nut 1/2-20 toplock, snap ring and rod. For the following tractors: 135, 20, 2135, 35, 35 Turf, 35 Utility, TO35. Requires, but does not include a seal kit OEM number 835682M91. We do not have the seal kit available. VERIFY PART NUMBER TO ENSURE CORRECT REPLACEMENT. (Item #: 165267, Ref: 1041940M91) $577.00

Power Steering Cylinder Rack - For 35, TO35, 135, 2135, 20. Power Steering Cylinder Rack, new style. To add to order enter in comment section. must be used with "new style" shaft Rack and Pin Set Available as part number 1751665M1KIT (Item #: 155114, Ref: 1751665M1) $158.00

Power Steering Gear Bearing and Races - These Bearing and Races are used on the Steering Worm Shaft on power steering models; TO35, 20, 135, 2135. Replaces 1751676M1 (Item #: 170142, Ref: LA33586A) $48.70

Power Steering Gear Rack Wear Block Assembly - Assembly contains Plate, Ware Block and 2 Screws. For tractor models 35, TO35, 135, 2135. Power Steering Gear Rack Wear Block Assembly. Also replaces 1751653M1, 751644M1, 1751643M1, 1751644M1. (Item #: 178301, Ref: 1751653M1) $43.40

Power Steering Piston Rod Seal - This power steering piston rod seal has a .625 inch Inside Diameter, a 1.128 inch Outside Diameter and is .25 inch wide. It Fits: 135, 2135, 35, FE35, MF20 Industrial, TO35. Replaces: 1751701M1 (Item #: 178140, Ref: A26778) $8.50

Power Steering Pump with Reservoir - For tractor models MH50, TO35, 135, 202, 203, 204, 2135, 35, 40, 50, 65, (150 AG GAS (CONT ENG)GAS/DSL). Replaces part number 182493M92, 191277M91, 191423M92, 191426M91, 191486M91. Pump comes with internal relief valve. (Item #: 112571, Ref: 544443M91) $530.00

Power Steering Rack, Pin, Rod Kit - For tractor models 135, 2135, 35, TO35. Power Steering Rack (1751665M1), Pin (1041936M1) and Rod (1751662M1). Kit also includes nut and snap ring (364449M1 and 355912X1 [X2]). (Item #: 1751665M1Kit) $158.00

Power Steering Valve Assembly - For tractor models TO35, 35, 135, Industrials 20, 35, (2135 Turf). Replaces 1755047M91. (Item #: 182808, Ref: 1018735M92) $740.00

Spindle Bushing - Spindle Bushing for tractor models 135, 148, 20, 20C, 2135, 230, 235, 240, 250, 35, FE135, FE35, TE20, TO20, TO30, TO35. Bushing Measures 1.395 inches outside diameter X 1.265 inches inside diameter X 1.5 inches long. (Item #: 102473, Ref: 180345M1) $2.80

Spindle Nut - Castle Nut is 3/4 inch x 16 UNF. Replaces 353928X1, 376451X1. (Item #: 156038, Ref: 387930S36) $1.10

Spindle Repair Kit - (4) 180345M1 bushings, (2) 18560X thrust bearings, (2) 180355M1 spindle dust seals. For tractor models FE35, TEA20, TED20, TEF20, TE20, TO20, TO30, TO35, 135, 20, 2135, 230, 235, 240, 240S, 35. (Item #: 104970, Ref: SBBSKIT01) $29.30

Spindle Thrust Bearing - This Spindle Thrust Bearing measures 1.250 inch inside diameter, 2-3/16 inch outside diameter, 5/8 inches deep. Replaces 195175M1. For tractor models 20, 2135, F40, FE35, MF135, MF150, MF165, MF230, MF235, MF245, MF35, MF50, MF65, TE20, TO20, TO30, TO35. (Item #: 102478, Ref: 18560X) $7.10

Spindle, LH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. For tractor models TE20 serial number 49999 and up, 35, FE35, TEA20, TED20, TEF20, FE35, to serial number 368615, TO20, TO30, TO35. Also replaces OEM number 897415M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102472, Ref: 180349M92) $55.00

Spindle, RH - This spindle measures A=11 inch, B=1 1/4 inch, C=3/4 inch UNF. Fits tractor models TE20 serial number 49999 and above. 35, FE35, TEA20, TED20, TEF20, TO20, TO30, TO35, MF35. Also replaces OEM number 897414M91. The wheel bearing kit used for this spindle is part number WBKMF1. (Item #: 102471, Ref: 180346M92) $61.00

Steering Arm - For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, 135 UK, 135, 148, 230, 240, 250, 35. Replaces 180 350M1, 180350M1 (Item #: 102536, Ref: 180350M1) $30.00

Steering Box Assembly - Steering Box Assembly, for manual steering tractors. Length 17 inches. uses 1691798M1 steering wheel. Used on 231, 240, 250, 20D, 30E, 40E (Will also work on; 35, 50, 20, 135, 2135, 235, 202, 203, 204, 205 by ordering two 827690M1 'cup and lock ring sets' and 1691798M1 Steering Wheel.) Replaces 1673663M1, 1673663M91. Does not come with Mounting Gasket or Shifter Cups. (Item #: 161571, Ref: 1673663M1) $533.00

Steering Column Grommet - Verify Measurements: 1 3/8 inch inside diameter, 2 3/8 inch outside diameter. For tractor models TO35 (serial number 154616-204180), 25, F40, 50, 65, 85, 88, 90, 356, 10, 12, 14. (Item #: 126706, Ref: 180575M1) $15.00

Steering Column Kit, Manual - Used on manual steering column. Kit contains column spring, seat and bearing. For model TO35. (Item #: 118504, Ref: S.67122) $34.87

Steering Column Shim Kit - This Shim Kit contains 2 - .020 Shims, 2 - .010 Shims, 2 - .005 Shims. TO35, 100, 135, 2135 (industrial), and 35. Replaces 830627M91 (Item #: 179603, Ref: 8N3595KIT) $25.50

No
Picture
Steering Rack Rod - For Massey Ferguson tractor models TO35, 35, 135, Compatible with Massey Ferguson Construction and industrial models 20, 2135, Replaces Massey Ferguson OEM number 1751662M1, Only for applications that have an updated steering rack., Will not replace original rod, Rod only, (Item #: 173650) $65.00

Steering Sector Kit - This Steering Sector Kit is for 1 side, 2 kits used per tractor. Kit contains adjuster bolt, nut, washer, o-rings, shims, and felt seal. (Adjuster Bolt is Allen Head Type, not slotted like original). For models TO35 and FE35. Replaces 1023837M1, 180560M1, 180562X1, 22-456X, 353428X1, 353436X1, 353440X1, 830628M91, and 833455M1. (Item #: 178090, Ref: S.67109) $22.60

Steering Shaft Assembly - For TO35, 35, 135, 202, 203, 204, 205, 2135 with Manual Steering. 21 3/8 inches Long. (Item #: 165143, Ref: 180538M91) $189.00

Steering Shaft Bearing Assembly - For Steering Column (without Power Steering). Tractors: TE20, TEA20, TO35, 35, 135, 20, 2135. Replaces original part number 180528M91. (Item #: 124501, Ref: 8N3517) $25.60

Steering Shaft Bearing Cone - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180549M1. (Item #: 111857, Ref: 8N3571-OE) $14.30

$Ferguson TO35 Steering Shaft Bearing Cone - Upper\Lower$
Steering Shaft Bearing Cone - Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180549M1, For Steering Shaft Bearing Cup - Upper/Lower use Item #: 111857, (Item #: 173671) $14.10

Steering Shaft Bearing Cup - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Replaces OEM 180526M1. (Item #: 173338, Ref: 8N3552) $12.80

No
Picture
Steering Shaft Bearing Cup -Upper/Lower - For Massey Ferguson tractor models TO35 (manual steering), 35 (manual steering), 95 (manual steering), 135 (manual steering), Compatible with Massey Ferguson Construction and industrial models 2135 (manual steering), Replaces Massey Ferguson OEM number 180526M1, O.D.: 1.7515", Width: .390", For Steering Shaft Bearing - Upper/Lower use Item #: 111857, (Item #: 173670) $19.40

Steering Shaft Bearing and Cup Assembly - Upper/lower. For tractor models 135, 2135, 35, Super 95, TO35. All with manual steering. Price is for one set. 2 required per steering shaft/top and bottom. Replaces OEM 180549M1 and 180526M1. (Item #: 111857, Ref: 8N3505) $14.30

Steering Shaft Seal - 49/64 inch X 1 3/8 inch X 25/64 inch. For tractor models 135, 20, 202, 203, 204, 205, 2135, 230, 235, 245, 35, TO35. Replaces 1876951M1. (Item #: 172323, Ref: 1751702M1) $8.70

Steering Shaft and Nut Assembly - For Power Steering on TO35, 35, 135 (>serial number 641016186), 2135 (prior to serial number 646001410). Shaft measures 21 3/4 inches overall length. Replaces 1751666M1, 1751666M91. (Item #: 182854, Ref: 1751666M91) $212.00

Steering Wheel - For TO20, TO30, TO35, 35, 135, F40, 50, and 65. 17-3/4 inch diameter, 3/4 inch hub with 3/16 inch keyway. Covered Metal Spokes. (41486S) (Item #: 122474, Ref: 180576M1) $26.50

Steering Wheel - Original Type - For tractor models TE20, TEA20, TO20, TO30, TO35, 20, 35, 135, 50, 65, 2135. 17-3/4 inch diameter, 3/4 inch hub with 11/16 inch keyway. Metal Spokes. (Item #: 101418, Ref: 180576M1-OE) $27.30

Steering Wheel Nut - Zinc Plated Steel Nut, Steering Wheel Acorn Style. 5/8 - 18 NF thread. 1.132 inches tall. 1 inch wrench size. Replaces 207562, 70207562, 913133, 351103-S, 351103S, 751454R1, AL2315T, 195592M1 (Item #: 183746, Ref: 351103S) $9.00

Steering Wheel Nut, Black - Black, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40. Repalces OEM 195592M1. (Item #: 351103CCBlack) $7.86

Steering Wheel Nut, Chrome - Chrome, Domed. For tractor models TE20, TEA20, TEF20, TO20, TO30, TO35, FE35, F40, 20, 202, 203, 204, 205, 50E, Pony, Super 90, 135, 135 UK, 270, 283, 290, 298, 35. Repalces OEM 195592M1. Head uses a 1 1/8 inch wrench. (Item #: 150988, Ref: 351103CC) $8.10

Steering Wheel Washer - This steering wheel washer is 1.497 inch outside diameter, 0.645 inch inside diameter and is 0.180 inches thick. It is used on F40, TE20, TO20, TO30, TO35, 135, 35, 50, 65, 85, 88, 202, 204, 2135. Replaces 180577M1, 180577V1, TO3673. (Item #: 179684, Ref: 180577M1) $4.40

Tie Rod Assembly - Drag Link Assembly. For the following tractors: 135 DELUXE/SPECIAL, 20 TURF, 2135 TURF, 230 SWEPT AXLE with serial number to 9A349239, 235 STANDARD SWEPT AXLE, 35, TO35. Includes Ties Rod Ends 193733M91 and 180507M91 and Tie Rod. Length, overall 39.5 inches end to end. (Item #: 105107, Ref: 180780M92) $65.00

Tie Rod End, LH Thread - 3.312 inches in length, .687 inch diameter 18 left hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. If you have a Jam Nut style tube (as opposed to clamping style), and need to replace the nut, it is available separately as part number 193068M1. Replaces 180391M91, 193733M91, 193733V91, 194607M91. (Item #: 105108, Ref: 193733M91) $15.90

Tie Rod End, RH Thread - 3.60 inches in length, .687 inch diameter 18 right hand thread. For tractor models 135, 20, 2135, 230 swept axle serial number <-9A349239, 235 swept axle, 35, TO35. (Item #: 105109, Ref: 180507M91) $20.60

Tie Rod Tube - Tie Rod Tube. Length: 34.810 inch. 11/16 (.687) - 18 thread RH one end and LH on other. For: 135 Deluxe/Special, 230 Swept Axle to serial number 9A349239, 235 Swept Axle, 35, TO35. (Item #: 105110, Ref: 193069M1) $61.00

Wheel Hub - Front Wheel Hub. Six bolt. For the following tractors: 35, 50, 65, MH50, TE20 (serial number to 49998 and 52497-52565), TO30, TO35. Replaces 180338M91, 898085M91. (Item #: 133657, Ref: 180338M92) $48.00

Universal Parts and Accessories
Category: Steering

Eaton Power Steering Pump Replacement - This Power Steering Pump replaces the Eaton style belt driven Power steering Pump. It also replaces Eaton part numbers: 503-1005-005, 20928 and P761. This is a Redesigned Pump that uses a bearing instead of original bushing. It can also be adapted to tractors using Char-Lynn Power Steering with an Eaton Pump. Please note that this pump does not include brackets, top mounted reservoir, or pulley. Some applications will require a new pressure hose to be made for a 5/8-18 inch inverted flare type fitting. The shaft diameter measures .670 inches. The shaft length, where the pulley mounts measures .575 inches. There is a 2 inch thick pump housing where the bracket bolts on. Pressure is preset at 1.32 GPM. (Item #: 113730, Ref: S03-1003) $417.87

Filter, Power Steering - Filter case size is 3 inches diameter and 1 1/2 inch height. Center hole is approximately 7/8 inch diameter. VERIFY size before ordering. It is used on tractors with Eaton style power steering pumps. Replaces: 1008553M1, 1052262M91 (Item #: 111126, Ref: AE33538A) $13.20

Power Steering Pump Pulley - This Power Steering Pump Pulley is used with S03-1003 Power Steering Pump. It is designed for Tractors using Eaton Style power steering pump. It is made of Stamped steel. Measures 5 inches outside diameter, 0.675 inch bore, 1/8 inch keyway, 0.9715 inch total width for 1/2 inch belt. (Item #: 164438, Ref: ABC1417) $47.60

Steering Wheel Spinner, Bare Aluminum - Comes with mounting hardware. (Item #: 108667, Ref: R3275) $8.20

Steering Wheel Spinner, Blue - Comes with mounting hardware. (Item #: 108664, Ref: R3279) $8.70

Steering Wheel Spinner, Green - Comes with mounting hardware. (Item #: 108666, Ref: R3278) $13.40

Steering Wheel Spinner, Orange - Comes with mounting hardware. (Item #: 108660, Ref: R6323) $15.10

Steering Wheel Spinner, Red - Comes with mounting hardware. (Item #: 108663, Ref: R3277) $9.10

Steering Wheel Spinner, Yellow - Comes with mounting hardware. (Item #: 108665, Ref: R3280) $7.70

Tie Rod Boot Assortment - Includes 6 Tie Rod Boots. Two each of the following sizes: 1 13/16 inches x 5/8 inch x 5/8 inch, 1 15/16 inches x 3/4 inch, 3/4 inch, and 1 3/8 inches x 1 inch x 1/2 inch. (Item #: 183427, Ref: TIERODBOOTS) $13.00

No
Picture
Wheel Spinner- Black - Wheel Spinner, black knob, universal. WSV124B (Item #: 108662, Ref: R3276) $8.70

Call 800-853-2651 to Order
Or Click the "Add to Cart" Button

Category: Steering

[Categories] [All TO35 Parts] [All Ferguson Models]

Order Toll Free
(800) 853-2651
Mon-Fri 7am-7pm CT

Order online
anytime!

YESTERDAY's TRACTORS has been a leading tractor parts supplier on the internet since 1995. Join thousands of happy customers who have purchased parts and more for their antique tractor from us!

TRADEMARK DISCLAIMER: Tradenames and Trademarks referred to within Yesterday's Tractor Co. products and within the Yesterday's Tractor Co. websites are the property of their respective trademark holders. None of these trademark holders are affiliated with Yesterday's Tractor Co., our products, or our website nor are we sponsored by them. John Deere and its logos are the registered trademarks of the John Deere Corporation. Agco, Agco Allis, White, Massey Ferguson and their logos are the registered trademarks of AGCO Corporation. Case, Case-IH, Farmall, International Harvester, New Holland and their logos are registered trademarks of CNH Global N.V.

Website Accessibility Policy

Privacy Policy